Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Gibbs”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Dynamic mass accountancy modeling of a molten salt reactor using equilibrium thermodynamics

A mechanistic-based mass accountancy model in the context of liquid-fueled molten salt reactors was implemented in the dynamic systems modeling software library TRANSFORM by way of coupling with the equilibrium thermodynamics code Thermochimica. Liquid-fueled molten salt reactors present new challenges for mass accountancy because of the dissolution of fuel and evolved fission products, which may be soluble in the salt, off-gas, or precipitate. Two cases of mass loss from the molten salt were addressed: off-gassing and precipitation. The software implementation was tested through a series of increasingly complex demonstration problems, culminating in a model of the primary fuel and primary coolant loops of the molten salt demonstration reactor. Analysis shows that negligible mass was lost from the salt under normal operating conditions, but an overheating event caused by partial loss of fuel loop cooling resulted in release of measurable amounts of uranium (among other elements) via off-gassing. The tools developed here are primarily aimed at capability development but are readily available for use in further modeling of molten salt reactor concepts. As a result, these tools have not yet been validated, and future experimental work to perform this validation is recommended.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2023

Oxide– and Silicate–Water Interfaces and Their Roles in Technology and the Environment

Interfacial reactions drive all elemental cycling on Earth and play pivotal roles in human activities such as agriculture, water purification, energy production and storage, environmental contaminant remediation, and nuclear waste repository management. The onset of the 21st century marked the beginning of a more detailed understanding of mineral aqueous interfaces enabled by advances in techniques that use tunable high-flux focused ultrafast laser and X-ray sources to provide near-atomic measurement resolution, as well as by nanofabrication approaches that enable transmission electron microscopy in a liquid cell. This leap into atomic- and nanometer-scale measurements has uncovered scale-dependent phenomena whose reaction thermodynamics, kinetics, and pathways deviate from previous observations made on larger systems. A second key advance is new experimental evidence for what scientists hypothesized but could not test previously, namely, interfacial chemical reactions are frequently driven by “anomalies” or “non-idealities” such as defects, nanoconfinement, and other nontypical chemical structures. Third, progress in computational chemistry has yielded new insights that allow a move beyond simple schematics, leading to a molecular model of these complex interfaces. In combination with surface-sensitive measurements, we have gained knowledge of the interfacial structure and dynamics, including the underlying solid surface and the immediately adjacent water and aqueous ions, enabling a better definition of what constitutes the oxide– and silicate–water interfaces. This critical review discusses how science progresses from understanding ideal solid–water interfaces to more realistic systems, focusing on accomplishments in the last 20 years and identifying challenges and future opportunities for the community to address. Further, we anticipate that the next 20 years will focus on understanding and predicting dynamic transient and reactive structures over greater spatial and temporal ranges as well as systems of greater structural and chemical complexity. Closer collaborations of theoretical and experimental experts across disciplines will continue to be critical to achieving this great aspiration.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Nanoscale Size Effects on Push–Pull Fe–O Hybridization through the Multiferroic Transition of Perovskite ϵ-Fe 2 O 3

Multiferroics have tremendous potential to revolutionize logic and memory devices through new functionalities and energy efficiencies. To reach their optimal capabilities will require better understanding and enhancement of the ferroic orders and couplings. In this work, we use ϵ-Fe 2 O 3 as a model system with a simplifying single magnetic ion. Using 15, 20, and 30 nm nanoparticles, we identify that a modified and size-dependent Fe–O hybridization changes the spin–orbit coupling and strengthens it via longer octahedra chains. Fe–O hybridization is modified through the incommensurate phase, with a unique two-step rearrangement of the electronic environment through this transition with attraction and then repulsion of electrons around tetrahedral Fe. Interestingly, size effects disappear in the high-temperature phase where the strongest Fe–O hybridization occurs. By manipulating this hybridization, we tune and control the multiferroic properties.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2023

Insights into the Chemistry of the Cathodic Electrolyte Interphase for PTFE-Based Dry-Processed Cathodes

Dry processing is a promising method for high-performance and low-cost lithium-ion battery manufacturing which uses polytetrafluoroethylene (PTFE) as a binder. However, the electrochemical stability of the PTFE binder in the cathodes and the generated chemistry of the cathode electrolyte interphase (CEI) layers are rarely reported. In this work, the CEI properties and PTFE electrochemical stability are studied via cycling the high-loading dry-processed electrodes in electrolytes with LiPF 6 or LiClO 4 salt. Using LiClO 4 salt can eliminate other possible F sources, allowing the decomposition of PTFE to be studied. The detection of LiF in cells with the LiClO 4 salt confirms that PTFE undergoes side reaction(s) in the cathodes. When compared with LiClO 4 , the CEI layer is much thicker when LiPF 6 is used as the electrolyte salt. These results provide insights into the CEI layer and may potentially enlighten the development of binders and electrolytes for the high efficiency and long durability of DP-based LIBs.

25 ENERGY STORAGE↗
DOE OSTI2020

A Monte Carlo Approach to Approximating the Effects of Pore Geometry on the Phase Behavior of Soil Freezing

Abstract Freezing in porous media is associated with a host of dynamic phenomena that stem from the presence and mobility of premelted liquid at subzero temperatures. Accurate assessments of the progressive liquid‐ice phase transition is required for predictive models of frost damage, glacier‐till coupling, and many other cold regions processes, as well as for evaluating the capacity for water storage in near‐surface extraterrestrial environments. We use a Monte Carlo approach to sample the pore space in a synthetic 3D packing of poly‐dispersed spherical particles and evaluate local geometrical constraints that allow us to assess changes in the relative proportions of pore fluid and ice. By approximating the phase boundary geometry in fine‐grained pores while considering both the curvature of the liquid‐ice interface and wetting interactions with matrix particles, our model predicts changes in phase equilibrium in granular media over a broad temperature range, where present accounting for the colligative effects of chloride and perchlorate solutes. In addition to formulating the constitutive behavior needed to better understand properties and processes in frozen soils, our results also provide insight into other aspects of phase equilibria in porous media, including the formation of methane hydrates in permafrost and marine sediments, and the partitioning between liquid water and vapor in the vadose zone.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Cropland expansion in the United States produces marginal yields at high costs to wildlife

Recent expansion of croplands in the United States has caused widespread conversion of grasslands and other ecosystems with largely unknown consequences for agricultural production and the environment. Here we assess annual land use change 2008–16 and its impacts on crop yields and wildlife habitat. We find that croplands have expanded at a rate of over one million acres per year, and that 69.5% of new cropland areas produced yields below the national average, with a mean yield deficit of 6.5%. Observed conversion infringed upon high-quality habitat that, relative to unconverted land, had provided over three times higher milkweed stem densities in the Monarch butterfly Midwest summer breeding range and 37% more nesting opportunities per acre for waterfowl in the Prairie Pothole Region of the Northern Great Plains. Our findings demonstrate a pervasive pattern of encroachment into areas that are increasingly marginal for production, but highly significant for wildlife, and suggest that such tradeoffs may be further amplified by future cropland expansion.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Out-of-distribution generalization for learning quantum dynamics

Abstract Generalization bounds are a critical tool to assess the training data requirements of Quantum Machine Learning (QML). Recent work has established guarantees for in-distribution generalization of quantum neural networks (QNNs), where training and testing data are drawn from the same data distribution. However, there are currently no results on out-of-distribution generalization in QML, where we require a trained model to perform well even on data drawn from a different distribution to the training distribution. Here, we prove out-of-distribution generalization for the task of learning an unknown unitary. In particular, we show that one can learn the action of a unitary on entangled states having trained only product states. Since product states can be prepared using only single-qubit gates, this advances the prospects of learning quantum dynamics on near term quantum hardware, and further opens up new methods for both the classical and quantum compilation of quantum circuits.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

Bridging molecular-scale interfacial science with continuum-scale models

Solid–water interfaces are crucial for clean water, conventional and renewable energy, and effective nuclear waste management. However, reflecting the complexity of reactive interfaces in continuum-scale models is a challenge, leading to oversimplified representations that often fail to predict real-world behavior. This is because these models use fixed parameters derived by averaging across a wide physicochemical range observed at the molecular scale. Recent studies have revealed the stochastic nature of molecular-level surface sites that define a variety of reaction mechanisms, rates, and products even across a single surface. To bridge the molecular knowledge and predictive continuum-scale models, we propose to represent surface properties with probability distributions rather than with discrete constant values derived by averaging across a heterogeneous surface. This conceptual shift in continuum-scale modeling requires exponentially rising computational power. By incorporating our molecular-scale understanding of solid–water interfaces into continuum-scale models we can pave the way for next generation critical technologies and novel environmental solutions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

p14 ARF forms meso-scale assemblies upon phase separation with NPM1

NPM1 is an abundant nucleolar chaperone that, in addition to facilitating ribosome biogenesis, contributes to nucleolar stress responses and tumor suppression through its regulation of the p14 Alternative Reading Frame tumor suppressor protein (p14 ARF ). Oncogenic stress induces p14 ARF to inhibit MDM2, stabilize p53 and arrest the cell cycle. Under non-stress conditions, NPM1 stabilizes p14 ARF in nucleoli, preventing its degradation and blocking p53 activation. However, the mechanisms underlying the regulation of p14 ARF by NPM1 are unclear because the structural features of the p14 ARF -NPM1 complex were elusive. Here we show that p14 ARF assembles into a gel-like meso-scale network upon phase separation with NPM1. This assembly is mediated by intermolecular contacts formed by hydrophobic residues in an α-helix and β-strands within a partially folded N-terminal portion of p14 ARF . These hydrophobic interactions promote phase separation with NPM1, enhance p14 ARF nucleolar partitioning, restrict NPM1 diffusion within condensates and nucleoli, and reduce cellular proliferation. Our structural analysis provides insights into the multifaceted chaperone function of NPM1 in nucleoli by mechanistically linking the nucleolar localization of p14 ARF to its partial folding and meso-scale assembly upon phase separation with NPM1.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Quantification and prediction of solidification textures under additive manufacturing conditions

Crystallographic textures are a major determinant of the macroscale anisotropic properties of polycrystalline metallic alloys produced in a wide range of additive manufacturing (AM) processes. Here, we introduce a statistical method that can accurately quantify the degree of orientational order of textures despite the large random fluctuations in the orientation of individual grains inherent in AM processes. The method, demonstrated for laser and resolidification of AlSi thin films, extends Z-scoring to a dynamical regime to assess the statistical significance of observed textures compared to randomly generated ones at different stages of solidification. We further show that, combined with phase-field modeling, this method can be used to infer fundamental anisotropic properties of the solid-liquid interface that are essential for texture prediction, and are compared here to the results of atomistic simulations. In addition, phase-field modeling reveals that, even at rapid AM solidification rates, the observed 〈110〉-dominated textures in the AlSi thin films are controlled predominantly by the anisotropy of the interface free-energy and sheds light on the physical mechanism of grain competition. These results significantly enhance both the existing tools for the quantification and prediction of AM crystallographic textures and our basic understanding of their formation.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Long-time simulations for fixed input states on quantum hardware

Publicly accessible quantum computers open the exciting possibility of experimental dynamical quantum simulations. While rapidly improving, current devices have short coherence times, restricting the viable circuit depth. Despite these limitations, we demonstrate long-time, high fidelity simulations on current hardware. Specifically, we simulate an XY-model spin chain on Rigetti and IBM quantum computers, maintaining a fidelity over 0.9 for 150 times longer than is possible using the iterated Trotter method. Our simulations use an algorithm we call fixed state Variational Fast Forwarding (fsVFF). Recent work has shown an approximate diagonalization of a short time evolution unitary allows a fixed-depth simulation. fsVFF substantially reduces the required resources by only diagonalizing the energy subspace spanned by the initial state, rather than over the total Hilbert space. We further demonstrate the viability of fsVFF through large numerical simulations, and provide an analysis of the noise resilience and scaling of simulation errors.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2020

Open Science principles for accelerating trait-based science across the Tree of Life

Synthesizing trait observations and knowledge across the Tree of Life remains a grand challenge for biodiversity science. Species traits are widely used in ecological and evolutionary science, and new data and methods have proliferated rapidly. Yet accessing and integrating disparate data sources remains a considerable challenge, slowing progress toward a global synthesis to integrate trait data across organisms. Trait science needs a vision for achieving global integration across all organisms. In this perspective, we outline how the adoption of key Open Science principles—open data, open source and open methods—is transforming trait science, increasing transparency, democratizing access and accelerating global synthesis. To enhance widespread adoption of these principles, we introduce the Open Traits Network (OTN), a global, decentralized community welcoming all researchers and institutions pursuing the collaborative goal of standardizing and integrating trait data across organisms. We demonstrate how adherence to Open Science principles is key to the OTN community and outline five activities that can accelerate the synthesis of trait data across the Tree of Life, thereby facilitating rapid advances to address scientific inquiries and environmental issues. Lessons learned along the path to a global synthesis of trait data will provide a framework for addressing similarly complex data science and informatics challenges.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Spatially explicit terrestrial carbon densities for calibrating the carbon cycle in human-Earth system Models

Soil and vegetation carbon stocks play a critical role in human-Earth system models. These stocks (denominated as densities in MgC/ha) affect variables such as land use change emissions and also influence land use change pathways under climate forcing scenarios where terrestrial carbon is assigned a carbon price. Here we present reharmonized soil and vegetation carbon densities both at the 5-arcmin resolution grid cell level and also aggregated to 235 water sheds for 4 land use types (Cropland, Grazed land, Urban land and unmanaged vegetation) and 15 unmanaged land cover types. Moreover, we use the distribution of carbon within and across pixels to define statistical "states" of carbon, once again differentiated by land type. These statistical states are used to define a range of possible carbon values that can be used for defining initial conditions of soil and vegetation carbon in human-Earth system models. We implement these data in a state-of-the-art multi sector dynamics model, namely the Global Change Analysis Model (GCAM), and show that these new data improve several land use responses, especially when terrestrial carbon is assigned a carbon price.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Galápagos tortoise stable isotope ecology and the 1850s Floreana Island Chelonoidis niger niger extinction

A consequence of over 400 years of human exploitation of Galápagos tortoises (Chelonoidis niger ssp.) is the extinction of several subspecies and the decimation of others. As humans captured, killed, and/or removed tortoises for food, oil, museums, and zoos, they also colonized the archipelago resulting in the introduction of invasive plants, animals, and manipulated landscapes for farming, ranching, and infrastructure. Given current conservation and revitalization efforts for tortoises and their habitats, here we investigate nineteenth and twentieth century Galápagos tortoise dietary ecology using museum and archaeological specimens coupled with analysis of carbon (δ 13 C collagen and δ 13 Capatite), nitrogen (δ 15 N), hydrogen (δD) and oxygen (δ 18 O apatite ) stable isotopes and radiocarbon dating. We identify that Galápagos tortoise diets vary between and within islands over time, and that long-term anthropogenic impacts influenced change in tortoise stable isotope ecology by using 57 individual tortoises from 10 different subspecies collected between 1833 and 1967—a 134-year period. On lower elevation islands, which are often hotter and drier, tortoises tend to consume more C 4 vegetation (cacti and grasses). Our research suggests human exploitation of tortoises and anthropogenic impacts on vegetation contributed to the extinction of the Floreana Island tortoise (C. n. niger) in the 1850s.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Interpretable machine learning models classify minerals via spectroscopy

Developing methods to identify mineral species confidently and rapidly from Raman spectral analysis is critical to numerous fields. Traditionally, analysis relies on pattern matching the Raman spectrum of an unknown dataset with a supporting library of well-characterized spectral data, which may prove difficult for environmental samples that are poorly crystalline or phase mixtures. Here, we developed interpretable machine learning models that can classify uranium minerals by secondary oxyanion chemistry and other physicochemical properties based solely on Raman spectra. This new ML method produces a mineral profile of physical and chemical properties for an unknown sample and can rapidly classify or identify unknown minerals from Raman data, without the need for an exact pattern match in a spectral library. Training models are validated by 1. Strong correlation of high confidence model regions with published spectroscopic assignments and 2. Correct classification of a mineral not present in training data. Training data are from the Compendium of Uranium Raman and Infrared Experimental Spectra and available crystallographic information files within the open-source Smart Spectral Matching scientific framework. Physically meaningful classifier models can rapidly identify key structural and chemical information about unknown uranium minerals and the overall methodology is broadly applicable for mineral phases.

Machine learning↗