Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Gap Assessment”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Retrospective Analysis of Backwater Habitat Availability Using Remote Sensing

Low-velocity channel-margin habitats serve as important nursery habitats for the endangered Colorado pikeminnow (Ptychocheilus lucius) in the middle Green River between Jensen and Ouray, Utah. These habitats, known as backwaters, are associated with emergent sandbars, and are shaped and reformed annually by peak flows. Our recent knowledge about backwater characteristics and dynamics that is summarized in the synthesis report (Grippo et al. 2015) was based on detailed annual survey data from a relatively small sample of backwaters that were collected from 2003 to 2014 and reach-wide evaluations of backwater surface area based on manual interpretation of aerial and satellite imagery. Methods that bridge the gap between the detailed surveys from a small number of backwaters and the reach-wide assessment of their surface area would enable an assessment of the availability of backwater habitats that meet the minimum depth requirements for suitable habitat for Colorado pikeminnow. In 2015 Argonne National Laboratory (Argonne) tested three regression models—linear, multiple, and partial least square (PLS) regression models—for estimating backwater depth using National Agriculture Imagery Program (NAIP) imagery collected in July 2006 that covered the Jensen-Ouray reach of the Green River (Hamada and LaGory 2016). The results suggested that a PLS regression model showed high correlation with the reference depth (R 2 = 0.69) and had the most unbiased and consistent estimate of backwater depth. The results also indicated that the PLS model would provide reasonable estimates of the amount of habitat providing a minimum suitable depth of 30 cm for young-of-the-year Colorado pikeminnow, even though absolute depth estimates may be uncertain for backwater areas deeper than approximately 40 cm. The study also provided insights regarding the amount and the selection of calibration and validation (cal-val) data needed for improving the accuracy of depth prediction.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1989

Cryogenic fluid management technology requirements for the Space Transfer Vehicle

An in-house study was performed to design a cryogenic Space Transfer Vehicle (STV) for the late 1990s that can evolve with the demanding mission requirements of the manned exploration initiatives. An assessment of cryogenic fluid management technology issues associated with the STV was performed to identify technology gaps and propose advanced development activities.

Cramer, John M.↗
NASA NTRS1998

Characterization of PVT Grown ZnSe by Low Temperature Photoluminescence

ZnSe, a II-VI semiconductor with a large direct band gap of 2.7 eV at room temperature and 2.82 eV at 10 K, is considered a promising material for optoelectric applications in the blue-green region of the spectrum. Photoemitting devices and diode laser action has been demonstrated as a result of decades of research. A key issue in the development of II-VI semiconductors is the control of the concentration of the various impurities. The II-VI semiconductors seem to defy the effort of high level doping due to the well known self compensation of the donors and the acceptors. A good understanding of roles of the impurities and the behavior of the various intrinsic defects such as vacancies, interstitials and their complexes with impurities is necessary in the development and application of these materials. Persistent impurities such as Li and Cu have long played a central role in the photoelectronic properties of many II-VI compounds, particularly ZnSe. The shallow centers which may promote useful electrical conductivity are of particular interest. They contribute the richly structured near gap edge luminescence, containing weak to moderate phonon coupling and therefore very accessible information about the energy states of the different centers. Significance of those residual impurities which may contribute such centers in II-VI semiconductors must be fully appreciated before improved control of their electrical properties may be possible. Low temperature photoluminescence spectroscopy is an important source of information and a useful tool of characterization of II-VI semiconductors such as ZnSe. The low temperature photoluminescence spectrum of a ZnSe single crystal typically consists of a broad band emission peaking at 2.34 eV, known as the Cu-green band, and some very sharp lines near the band gap. These bands and lines are used to identify the impurity ingredients and the defects. The assessment of the quality of the crystal based on the photoluminescence analysis is then possible. In this report we present the characterization of a ZnSe single crystal as grown by the physical vapor transport method, with special intention paid to the possible effects of the gravitational field to the growth of the crystal.

Wang, Ling Jun↗
NASA NTRS2016

In-Space Structural Assembly: Applications and Technology

As NASA exploration moves beyond earth's orbit, the need exists for long duration space systems that are resilient to events that compromise safety and performance. Fortunately, technology advances in autonomy, robotic manipulators, and modular plug-and-play architectures over the past two decades have made in-space vehicle assembly and servicing possible at acceptable cost and risk. This study evaluates future space systems needed to support scientific observatories and human/robotic Mars exploration to assess key structural design considerations. The impact of in-space assembly is discussed to identify gaps in structural technology and opportunities for new vehicle designs to support NASA's future long duration missions.

Belvin, W. Keith↗
NASA NTRS2018

Performing a Comprehensive Unmanned Aircraft System Full Integration Analysis for NASA ARMD

For many years, the concept of routinely flying unmanned aircraft systems (UAS) within the national airspace system (NAS) has been a long-term goal with numerous known and unknown technology and policy obstacles. Just within the last few years, the efforts and advancements from government, industry, and academia-sponsored research and development have greatly shortened the distance to the goal. The National Aeronautics and Space Administration (NASA) Aeronautics Research Mission Directorate (ARMD) has recognized that it is uniquely positioned to play a lead role in addressing the remaining UAS airspace integration (AI) challenges. To fully understand the magnitude and scope of these challenges, NASA ARMD initiated a study in 2015 to identify what would be needed to enable full integration of UAS for civil/commercial operations within the NAS by 2025. The desired outcome was a comprehensive analysis framework that ARMD could use to develop a research portfolio focused on retiring the remaining gaps and challenges standing in the way of full UAS integration. This document is a comprehensive assessment of UAS integration research to date.

UAS in the NAS↗
NASA NTRS2021

Spatiotemporal Methane Emissions from Global Reservoirs

Methane (CH4) is a greenhouse gas which contributes significantly to global warming and has atmospheric concentrations which have increased considerably in the last few decades, primarily due to human-induced emissions. Natural sources such as wetlands and inland aquatic systems (i.e., reservoirs, lakes, rivers) contribute substantially to global emissions but these natural systems comprise the most uncertain components of the CH4 budget. This study addresses multiple gaps and uncertainties associated with global CH4 emissions from reservoirs and undertakes a spatial and temporal assessment of global reservoir emissions. The results from this study suggest that reservoirs occupy a global area about 300,000 km2 (comparable to the size of the country of Italy) and emit 10.1 Tg CH4 yr-1. We identify data and methodological elements of previous estimates that indicate they may overestimate these emissions. This work provides a suite of global data sets, gridded at 0.25° × 0.25°, considering reservoir surface area, spatial distribution, eco-climatic system type, and the full annual cycle of daily CH4 emissions.

Spatiotemporal↗
NASA NTRS2026

Mechanical Design and Operation of a Novel Lunar Environment Structural Test Rig (LESTR)

The Lunar Environment Structural Test Rig (LESTR) was developed to address a critical gap in mechanical property data for metal alloy wire materials under lunar-relevant conditions down to 40 K. Conventional aerospace material databases provide thermophysical properties for bulk metals over a wide temperature range, but validated mechanical and physical property data below 77 K, particularly for small-diameter wires, remain limited and are generally the exception rather than the rule. These conditions are essential for Artemis mission hardware such as shape memory alloy (SMA) rover tires. LESTR’s design requirements were to combine a high-stiffness electrodynamic load frame with closed- cycle cryogenic cooling, high-vacuum capability (10–6 torr), and noncontact optical strain measurement to enable tensile, four-point bend, and fatigue testing of wires or other materials and geometries at temperatures from 40 to 125 K. These considerable requirements were merged with the need to lower the barrier of testing for the end user as measured in terms of cost-per-test cycle, safety improvement, and reduction in upkeep costs associated with state-of-the-art solutions associated with cryomechanical material characterization. The system incorporates modular gripping and alignment fixtures; precision thermal management using cryocoolers and embedded heaters; and integrated instrumentation for displacement, load, temperature, and vacuum control. Calibration procedures establish correlations between tooling and specimen temperature, ensuring accurate thermal conditions across the design envelope unbound by cryofluid conditions in heritage immersion-based test systems. Initial validation tests using Inconel (Special Metals Corp.) wire demonstrated accurate ultimate strength and post-yield behavior. The load frame operation was also verified under representative service conditions, including thermal cycling and prolonged fatigue loading. By generating mechanical property data at ultralow temperatures, LESTR fills a critical gap in existing materials databases and provides a scalable platform for iterative alloy development and durability assessment for planetary hardware. This capability supports NASA’s long-term objectives for surface exploration by enabling design confidence for components operating in extreme cryogenic environments.

LESTR↗
DOE OSTI2024

On the applicability of the Redlich-Kister framework for viscosity estimation of molten halide salt mixtures

For molten halide salt mixtures already being utilized or under consideration for carbon-free energy production systems, it is crucial that their viscosity is well understood so that system thermal hydraulics can be reliably assessed. Because of the difficulty in accurately measuring molten halide viscosity and the sheer size of the matrix of possible higher order salt mixtures that may be of interest to the energy industry, there are several gaps in the quantified understanding of molten halide viscosity across this matrix. As such, both first-principles and semi-empirical modeling techniques may be crucial for rapidly assessing this broad, complex compositional domain. Herein, the Redlich-Kister framework is applied to assess the feasibility of broadly interpolating and estimating the viscosity of several pseudobinary and pseudoternary molten halide salt systems that may be of key interest to the energy industry. The framework is based on the assumption that an ideal component and a nonideal component collectively describe the viscosity as a function of composition and temperature for a given molten halide system. Three different ideal models were considered for the ideal component, including Grunburg-Nissan, Katti-Chaudhri, and Gambill methods. Regarding the pseudobinary interpolations, the Redlich-Kister models with either the Grunburg-Nissan or Katti-Chaudhri models as the ideal component resulted in either highly (average error less than 5%) or reasonably (average error less than 15%) accurate interpolations of pseudobinary halide viscosity; BeF 2 - or UF 4 -bearing salts tended to result in reasonably accurate interpolations, whereas other pseudobinary mixtures tended to show high accuracy. Regarding the pseudoternary extrapolations, the Redlich-Kister framework shows reasonable success at estimating the extent to which a pseudoternary system may indicate deviations from ideal Grunburg-Nissan mixing, where discrepancies with comparative experimental data generally stay within 30%. Finally, the primary reasons identified for such discrepancies are (1) inaccuracy in the underlying experimental data, (2) different complexation behavior in the higher order systems compared to the pseudobinary subsystems, and (3) extrapolation into temperatures too far out of the domain, which is valid for the underlying experimental data feeding the Redlich-Kister model.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Multi-dimensional resilience: A quantitative exploration of disease outcomes and economic, political, and social resilience to the COVID-19 pandemic in six countries

The COVID-19 pandemic has highlighted a need for better understanding of countries’ vulnerability and resilience to not only pandemics but also disasters, climate change, and other systemic shocks. A comprehensive characterization of vulnerability can inform efforts to improve infrastructure and guide disaster response in the future. In this paper, we propose a data-driven framework for studying countries’ vulnerability and resilience to incident disasters across multiple dimensions of society. To illustrate this methodology, we leverage the rich data landscape surrounding the COVID-19 pandemic to characterize observed resilience for several countries (USA, Brazil, India, Sweden, New Zealand, and Israel) as measured by pandemic impacts across a variety of social, economic, and political domains. We also assess how observed responses and outcomes (i.e., resilience) of the COVID-19 pandemic are associated with pre-pandemic characteristics or vulnerabilities, including (1) prior risk for adverse pandemic outcomes due to population density and age and (2) the systems in place prior to the pandemic that may impact the ability to respond to the crisis, including health infrastructure and economic capacity. Our work demonstrates the importance of viewing vulnerability and resilience in a multi-dimensional way, where a country’s resources and outcomes related to vulnerability and resilience can differ dramatically across economic, political, and social domains. This work also highlights key gaps in our current understanding about vulnerability and resilience and a need for data-driven, context-specific assessments of disaster vulnerability in the future.

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRS2016

Assessment of Fencing on the Orion Heatshield

This paper presents recession measurements of arc-jet test articles that simulate an ablator with gap filler and were exposed to various heating profiles. Results were used to derive empirically-based differential recession models used for the baseline sizing of the Orion block heatshield architecture. The profile test conditions represent different local flight environments associated with different regions of the heatshield. Recession measurements were collected during and after arc-jet tests, and the results were used to observe the heating profiles’ effect on differential recession. Arc-jet tests were conducted at the Aerodynamic Heating Facility at NASA Ames Research Center.

Arc-jet testing↗
DOE OSTI2021

A proposed framework for the development and qualitative evaluation of West Nile virus models and their application to local public health decision-making

West Nile virus (WNV) is a globally distributed mosquito-borne virus of great public health concern. The number of WNV human cases and mosquito infection patterns vary in space and time. Many statistical models have been developed to understand and predict WNV geographic and temporal dynamics. However, these modeling efforts have been disjointed with little model comparison and inconsistent validation. In this paper, we describe a framework to unify and standardize WNV modeling efforts nationwide. WNV risk, detection, or warning models for this review were solicited from active research groups working in different regions of the United States. A total of 13 models were selected and described. The spatial and temporal scales of each model were compared to guide the timing and the locations for mosquito and virus surveillance, to support mosquito vector control decisions, and to assist in conducting public health outreach campaigns at multiple scales of decision-making. Our overarching goal is to bridge the existing gap between model development, which is usually conducted as an academic exercise, and practical model applications, which occur at state, tribal, local, or territorial public health and mosquito control agency levels. The proposed model assessment and comparison framework helps clarify the value of individual models for decision-making and identifies the appropriate temporal and spatial scope of each model. This qualitative evaluation clearly identifies gaps in linking models to applied decisions and sets the stage for a quantitative comparison of models. Specifically, whereas many coarse-grained models (county resolution or greater) have been developed, the greatest need is for fine-grained, short-term planning models (m–km, days–weeks) that remain scarce. We further recommend quantifying the value of information for each decision to identify decisions that would benefit most from model input.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2024

Review and Gap Analysis of Heliostat Components and Controls

This investigation provides a comprehensive literature review pertaining to heliostat components and controls as part of the U.S. Department of Energy (DOE), Heliostat Consortium (Heliocon) program. Here, this work presents a detailed assessment of subcomponents, controls and wireless communications elements that comprise various designs of helisotats within concentrating solar power (CSP) installations. Additionally, this work also provides the results of an industry survey, intended to compliment the literature discussion, to provide a gap analysis of the primary technology and cost areas that need to be addressed to help improved to spur concentrating solar power (CSP) bankability. Although the results of the study determined several key areas for development, three strategic areas identified were: (1) the use of advanced composite materials to replace a need for expensive steel within the structure and mirror substrate, (2) employment of closed-loop controls for automated calibration, reduction of commissioning time and O&M hours, reduction of drive requirements, as well as overall cost reduction, and (3) the need for more Heliostat-centric codes and standards to facilitate engineering confidence in the development of new features, cost reductions, or other design iterations to be seamlessly introduced without optical performance problems.

14 SOLAR ENERGY↗
DOE OSTI2020

High Penetration Power Electronics Grid: Modeling and Simulation Gap Analysis

Increased penetration of power electronics in the grid is happening through development of high-power drives (like in Type 3 or 4 wind turbines, industrial drives, etc.), high-voltage direct current (HVdc) systems, flexible alternating current transmission systems (FACTS), energy storage systems (ESSs), inverter-based renewables like solar and wind, electric vehicle chargers, and other technologies. Ongoing research and development in new power electronic technologies including, but not limited to, solid-state power substations (SSPS), extreme fast charging (XFC), solid-state transformers, and multi-port power electronics that integrate multiple sources/loads will further increase penetration levels. To ensure stakeholders can integrate high penetration of power electronic technologies safely and reliably requires tools and methods to assess and evaluate their impact on the grid. Objectives: This report surveys, assesses, and analyzes commercially available and open-source tools that can support the assessment and evaluation of power electronics in future grids with high penetration levels. The study includes aspects that range from power flow analysis to dynamics evaluation (including hardware-in-the-loop – HIL testing) for such systems. The challenges and gaps associated with the current generation of toolsets available to assess the technical impact of introducing high penetration of power electronics are reported. The method is summarized in Figure ES-1.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2023

Uncertainty analysis for techno-economic and life-cycle assessment of wet waste hydrothermal liquefaction with centralized upgrading to produce fuel blendstocks

Wet waste hydrothermal liquefaction is a promising technology for producing transportation fuels with much lower greenhouse gases emissions than petroleum-based fuels. However, its techno-economic and life cycle assessment are primarily based on laboratory scale testing data, subject to considerable uncertainties, and even bias, due to knowledge gaps. Here, a preliminary uncertainty analysis of key economic measures was conducted based on the 2019 state-of-technology model for biocrude production. Building on the preliminary analysis, this work presents a comprehensive uncertainty analysis in both economic and environmental measures of the entire supply chain of wet waste hydrothermal liquefaction to fuel blendstocks including biocrude upgrading based on the 2021 state-of-technology model. The analysis includes the most recent developments in hydrothermal liquefaction and biocrude upgrading technologies and Monte Carlo simulation based on an integrated model system including an improved reactor yield model, reduced-order process model, discounted cash flow economic model and simplified life-cycle assessment model. The estimated biocrude yield ranges from 42.2% to 52.4% with a median of 47.3%. The estimated fuel yield ranges from 34.7% to 42.7% with a median of 38.7%. The estimated minimum fuel selling price ranges from $\$ $2.28/gge to $\$ $3.45/gge with a median of $\$ $2.80/gge. Relative to petroleum-derived diesel, the estimated reduction in supply chain greenhouse gas emissions ranges from 73.4% to 81.8% with a median of 77.7%. Compared to the 2019 state-of-technology analysis, a significant improvement in biocrude selectivity and economic measures and reduction in uncertainties were achieved due to the incorporation of additional continuous experimental data sets, technology development and de-risking, and improvement in model accuracy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Adoption of Biofuels for the Marine Shipping Industry: A Long-Term Price and Scalability Assessment

One of the biggest challenges in the 21st Century is transforming the transportation sector into a low carbon-based sustainable industry, including maritime shipping. Bioenergy has an essential role in the transition to move maritime shipping toward carbon neutrality. Biomass-derived fuels can undoubtedly play a crucial role in the future of marine propulsion that as renewable alternatives can offer potential synergistic benefits when blended with petroleum fuels. With inherently zero- or low-sulfur and renewable carbon sources, biofuels will help mitigate marine shipping sulfur emissions, improve overall emission profiles, and enable the decarbonization transition. As biofuel for marine propulsion is still at its nascent stage, knowledge gaps exist, including the life cycle environmental impacts, compatibility of biofuel blending with conventional marine fuels, scalability, and cost. This study assessed the biofuel availability and cost aspects for marine use and was supported by the U.S. Department of Transportation’s Maritime Administration (MARAD) Office of Environment to project the long-term price and annual biofuel production capacity potential for marine propulsion in the United States. The study will shed light on the prospect of biofuel adoption for the maritime shipping industry.

09 BIOMASS FUELS↗
DOE OSTI2020

Quantitative Performance Assessment of Proxy Apps and Parents (ECP Proxy App Project Milestone ADCD-504-9)

This report presents highlights of these efforts. Section 2 describes work that has been done to compare the performance of proxy applications on AMD MI60 vs. Nvidia V100 GPUs. So far only a small set of ECP proxies are running on AMD GPUs, but we will continue to expand this analysis as additional proxies become available. We find that although the MI60 and V100 have nearly the same measured memory bandwidth, memory bound proxy app kernels perform 20-30% worse on the MI60. Further work is needed to refine these comparisons to determine whether the root cause is due to differences in the hardware, software stack, platform specific optimization, or some combination of the three. Section 3 describes our continuing effort to find methods to accurately assess the similarity of proxies and parents. We have recently seen very encouraging results using a cosine similarity metric. This technique uses the angle between two vectors of hardware performance counters to characterize the similarity (or difference) between two applications or proxies. We show not only that several widely used proxies are highly similar to their parents, but also that they differ from non-related codes. We also show that cosine similarity can be used to identify gaps and redundancies in suites and even to gain insight into the effects of architectural differences between platforms. Our work on assessing the Exascale toolchain is ongoing. Our successes with performance measurement tools are evident from the data provided in this report. However, our assessments across the broader tool chain are still too incomplete to provide a meaningful report at this time. We will continue to assess tools and work with vendors and third party developers as issues are identified.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2020

Modular electrode tool for improved hydraulic fracture diagnostics

Systems and methods for assessing physical properties of a geological formation are disclosed. The systems and methods may use electrodes that include two conductive portions separated by an isolation gap positioned along a casing in a wellbore in the formation. The electrodes may be sequentially energized to provide excitation stimulus into the formation while the remaining, non-energized electrodes may substantially simultaneously receive excitation responses to the excitation stimulus from the formation. The excitation responses may be assessed to determine one or more physical properties of fractures in the formation.

58 GEOSCIENCES↗
DOE OSTI2025

The Workforce Readiness Index: A Local and Regional Assessment Tool for Energy Sector Preparedness

Building up a workforce that is properly trained and adequately sized is essential to ensuring that the deployment of energy generation sources in the United States meets future energy demand. Workforce development to support supply chain or large infrastructure investments typically occurs at a local level. However, there is a critical gap in understanding where and to what extent regional workforces are equipped to meet the needs of an energy industry. The Workforce Readiness Index ("the index") was developed to assess and compare energy sector workforce readiness across the United States at the county level to provide granular information to various stakeholders such as industry members, state decision makers, and training program developers. Workforce readiness is defined as the ability to recruit from the general labor market, transition workers with comparable skill sets, and train a workforce using scalable or existing training programs near a specific location. Therefore, the index evaluates readiness levels based on the likelihood that a county possesses the workforce development infrastructure needed to support the occupations required by an energy-related industry or sector. Furthermore, the index offers a standardized yet flexible approach that captures regional variations and highlights local strengths and challenges.

17 WIND ENERGY↗