Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “GRAIN ORIENTATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

Relaxation of asymmetric crystallographic tilt: In situ x-ray diffraction studies of epitaxial electrodeposition of bismuth on GaAs (110)

High quality, epitaxial thin-films are key components of almost all modern electronic devices. During deposition, lattice mismatch between the substrate and the film generates elastic strain. The strain energy grows with film thickness until a defect is generated that relieves the strain. The strain relaxation mechanism is critical in epitaxial electrodeposition. Here, we study how a metal (bismuth) film growing via electrodeposition on a semiconductor substrate [GaAs(110)] relaxes the lattice mismatch-induced strain. Using in situ synchrotron-based X-ray techniques, we monitor the crystallographic orientation and grain size of the growing film during electrochemical deposition. We (1) confirm that a single crystallographic orientation of the film, with ($01\bar{1}8$) as the oriented plane, can be selected by controlling the overpotential, η, and (2) find that, after a threshold thickness is reached, the tilt angle varies monotonically with film thickness. Our data are consistent with the film relaxing the strain by forming low-energy, asymmetric tilt boundaries.

36 MATERIALS SCIENCE↗

Orientation-Dependent Surface Faceting in UO{sub 2}

The surface behavior of UO{sub 2} plays an important role throughout the lifetime of this widely-used commercial nuclear fuel, from manufacturing to waste storage. UO{sub 2} surface properties affect fuel swelling behavior by determining the morphology, size and distribution of fission gas bubbles. Additionally, UO{sub 2} surface characteristics influence fracture behavior, which is controlled by the thermodynamics of fracture surfaces. Therefore, detailed understanding of the fundamental surface behavior will help advance prediction of the fuel performance of UO{sub 2}. Due to significant anisotropy in surface tension, faceting features form after annealing in both UO{sub 2} and many other crystalline materials. Knowledge of the correlation between crystallographic orientation and surface faceting features will expand the fundamental knowledge of UO{sub 2} surface characteristics, leading to a better understanding of fission gas swelling and fracture mechanisms. Inherent characterization technique limited previous studies on the crystallographic orientation of UO{sub 2} surface facets to low Miller index surfaces in single crystal specimens. In this study, synchrotron Laue microdiffraction was utilized to examine the crystallographic orientation of grains on the coarse surface of a polycrystalline UO{sub 2} specimen. The results were then compared with the surface morphology, obtained from scanning electron microscopy (SEM), so that a general correlation between the surface faceting features and crystallographic orientation in UO{sub 2} can be established. Both the fundamental surface characteristics and the crystallographic orientation measurements obtained in this study help advance the experiment validation of MARMOT, a mesoscale multi-physics code that predicts the coevolution of microstructure and properties within reactor fuel during its lifetime in the reactor. The MARMOT code is an indispensable component of the MOOSE-BISON-MARMOT (MBM) code suite that has been developed by Idaho National Laboratory to enable next generation fuel performance modeling capability as a part of the Nuclear Energy Advanced Modeling and Simulation (NEAMS) Program Fuels Product Line (FPL). In this study, the surface-faceting features of UO{sub 2} were found to be dominated by the triple-plane structure and its variants. With this knowledge, by measuring the directions of the <110> edges, the crystallographic orientation of a surface UO{sub 2} grain can be precisely deduced in most regions of the standard stereogram triangle (SST) of the surface normal. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Processing Effects on the Self-Assembly of Brush Block Polymer Photonic Crystals

Here,the self-assembly of poly(dimethylsiloxane)-b-poly(trimethylene carbonate) (PDMS-b-PTMC) bottlebrush block polymers was investigated under different processing conditions. Small-angle X-ray scattering (SAXS) and UV/Visible spectroscopy provided insight into the self-assembly and structure in response to heating and applied pressure. In the absence of applied pressure (i.e., before annealing), the PDMS-b-PTMC bottlebrush block polymers are white solids and adopt small, randomly oriented lamellar grains. Heating the materials to 140 °C in the absence of applied pressure appears to “lock in” the isotropic, short-range-ordered state, preventing the formation of the long-range-ordered lamellar structure responsible for photonic properties. Applying modest anisotropic pressure (3 psi) between parallel plates at ambient temperature orients the short-range lamellar grains; however, applied pressure alone does not produce long-range order. Only when the bottlebrush block polymers were heated (>100 °C) under modest pressure (3 psi) were long-range-ordered photonic crystals formed. Analysis of the SAXS data motivated analogies to liquid crystals and revealed the potential self-assembly pathway. These results provide insight into the structure and self-assembly of bottlebrush block polymers with low glass transition temperature side chains in response to different processing conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effects of LPSO/α-Mg interfaces on dynamic recrystallization behavior of Mg96.5Gd2.5Zn1 alloy

Highlights: • The effects of LPSO/α-Mg interfaces on the dynamic recrystallization (DRX) behavior of Mg{sub 96.5}Gd{sub 2.5}Zn{sub 1} (at.%) alloy during indirect extrusion at 350 °C were investigated. • The LPSO/α-Mg interfaces in Mg{sub 96.5}Gd{sub 2.5}Zn{sub 1} alloy appeared as two groups, including the basal and non-basal LPSO/α-Mg interfaces, which have various effects on the DRX behavior of Mg{sub 96.5}Gd{sub 2.5}Zn{sub 1} alloy. • Compared with the basal LPSO/α-Mg interfaces, DRX grains are preferentially nucleated near the non-basal LPSO/α-Mg interfaces where there is higher V{sub GROD} and lower required energy E{sub s} for the DRX nucleation. - Abstract: Mg-Gd-Zn alloy, which contains a long period stacking ordered (LPSO) structure, has the potential to become a high-strength Mg alloy within the automotive and aerospace industries. Two types of LPSO/α-Mg interfaces in Mg{sub 96.5}Gd{sub 2.5}Zn{sub 1} (at.%) alloy were characterized, namely, basal and non-basal LPSO/α-Mg interfaces. The effects of LPSO/α-Mg interfaces on the dynamic recrystallization (DRX) behavior during indirect extrusion at 350 °C were investigated. The grain reference orientation deviation (GROD) value (V{sub GROD}), derived from EBSD, could qualitatively characterize the dislocation density within a grain and determine the presence of DRX grain nucleation. The results suggested that the areas around non-basal LPSO/α-Mg interfaces always have higher V{sub GROD} than do basal LPSO/α-Mg interfaces. In addition, the stored energy (E{sub s}) required for DRX nucleation on the non-basal LPSO/α-Mg interface is lower than that on the basal LPSO/α-Mg interface. This is a result of the flat, sharp basal LPSO/α-Mg interface compared to the faceted non-basal LPSO/α-Mg interface. Regardless of whether the LPSO structure/α-Mg matrix interface is coherent or not, non-basal LPSO/α-Mg interfaces are favorable nucleation sites for DRX grains due to the higher V{sub GROD} and lower required energy E{sub s}.

36 MATERIALS SCIENCE↗

Lateral Ordering of Cylindrical Microdomains Under Solvent Vapor

The development of the morphology in asymmetric polystyrene-block-poly(4-vinylpyridine) (PS-b-P4VP) thin films in tetrahydrofuran (THF) vapor, a selective solvent for majority PS block, as a function of time was investigated by scanning force microscopy (SFM) and grazing incidence small-angle X-ray scattering (GISAXS). When the PS-b-P4VP films were spin-coated from a toluene/THF mixture onto a silicon substrate, cylindrical microdomains were found to be oriented normal to the surface. By annealing under the THF solvent vapor, the distribution of the size and center-to-center distance between the cylindrical microdomains were significantly narrowed. The orientation and grain size of the cylindrical microdomains in the annealed films were characterized using Moire analysis obtained from SFM scan. GISAXS was used to characterize the morphology of the entire film.

59 BASIC BIOLOGICAL SCIENCES↗

A Technique for the Quantitative Characterization of Weld Microstructure and Application to Mo Welds

The choice of weld parameters determines the size, shape, and curvature of grains in the fusion zone (FZ) and heat-affected zone (HAZ) of welds while the mechanical properties of the welds are correlated to this microstructure. Here, a new technique to quantitatively evaluate these microstructural characteristics in both zones of welds has been applied to molybdenum gas tungsten arc welds fabricated using different weld parameters. Trends in microstructural characteristics in the FZ and HAZ were evaluated and correlated with changes to heat input, weld speed, and weld technique. The use of this approach showed that a 20 pct decrease in heat input caused a 20 pct decrease in the number of FZ grains with aspect ratios ≥ 4. The orientations of the FZ grain segments as a function of distance from the FZ centerline were significantly affected by the weld speed and its effect on weld pool shape. A 50 pct increase in weld speed caused a 20 pct decrease in grain segments orientated 60 to 90 deg from the normal to the direction of welding. This technique also captured differences in grain sizes and grain size anisotropy in the FZ between welds made with a constant current, pulsed current, and use of a 4-pole-magnetic oscillator.

36 MATERIALS SCIENCE↗

Texture in thin film silicides and germanides: A review

Silicides and germanides are compounds consisting of a metal and silicon or germanium. In the microelectronics industry, silicides are the material of choice for contacting silicon based devices (over the years, CoSi{sub 2}, C54-TiSi{sub 2}, and NiSi have been adopted), while germanides are considered as a top candidate for contacting future germanium based electronics. Since also strain engineering through the use of Si{sub 1−x}Ge{sub x} in the source/drain/gate regions of MOSFET devices is an important technique for improving device characteristics in modern Si-based microelectronics industry, a profound understanding of the formation of silicide/germanide contacts to silicon and germanium is of utmost importance. The crystallographic texture of these films, which is defined as the statistical distribution of the orientation of the grains in the film, has been the subject of scientific studies since the 1970s. Different types of texture like epitaxy, axiotaxy, fiber, or combinations thereof have been observed in such films. In recent years, it has become increasingly clear that film texture can have a profound influence on the formation and stability of silicide/germanide contacts, as it controls the type and orientation of grain boundaries (affecting diffusion and agglomeration) and the interface energy (affecting nucleation during the solid-state reaction). Furthermore, the texture also has an impact on the electrical characteristics of the contact, as the orientation and size of individual grains influences functional properties such as contact resistance and sheet resistance and will induce local variations in strain and Schottky barrier height. This review aims to give a comprehensive overview of the scientific work that has been published in the field of texture studies on thin film silicide/germanide contacts.

36 MATERIALS SCIENCE↗

Low-temperature (180 °C) formation of large-grained Ge (111) thin film on insulator using accelerated metal-induced crystallization

The Al-induced crystallization (AIC) yields a large-grained (111)-oriented Ge thin film on an insulator at temperatures as low as 180 °C. We accelerated the AIC of an amorphous Ge layer (50-nm thickness) by initially doping Ge in Al and by facilitating Ge diffusion into Al. The electron backscatter diffraction measurement demonstrated the simultaneous achievement of large grains over 10 μm and a high (111) orientation fraction of 90% in the polycrystalline Ge layer formed at 180 °C. This result opens up the possibility for developing Ge-based electronic and optical devices fabricated on inexpensive flexible substrates.

36 MATERIALS SCIENCE↗

Plasma-Assisted Epitaxy of Piezoelectric Sc x Al 1-x N Films on Sapphire for Use in Harsh-Environment Microwave Acoustic Sensors

The Sc x Al 1-x N wurtzite structure has been shown theoretically and experimentally to exhibit significantly higher piezoelectric coupling compared to pure AlN. In this work, a plasma-assisted epitaxial growth method has been used to synthesize epitaxial (0002) Sc x Al 1-x N films on c-sapphire substrates from x = 0.07 to 0.30 by co-evaporating high-purity Sc and Al sources in the presence of a nitrogen plasma generated by an RF plasma source. Epitaxial Sc x Al 1-x N films with highly oriented (0002) grains and in-plane registry were produced on c-sapphire substrates that were pre-exposed to the nitrogen plasma to form an oxynitride seed layer. Growth of Sc x Al 1-x N films was carried out at 930°C under both metal-rich and N-rich conditions using precisely controlled Sc, Al, and N-plasma fluxes. Metal-rich depositions yielded non-(0002)-oriented Sc x Al 1-x N grains and intermetallic ScAl grains. Nitrogen-rich growth with a Sc/Al flux ratio of 1/3 produced the best (0002) epitaxy as determined by x-ray diffraction analysis. Surface acoustic wave resonator (SAWR) devices were fabricated from 500-nm-thick Sc x Al 1-x N and AlN films to extract their electromechanical coupling coefficients, k 2 . As the Sc concentration in the films increases, the degree of (0002) epitaxy is reduced, yet the value of k 2 increases becasue there is more Sc in the wurzite lattice despite the decreased level of (0002) grain alignment. As a result, the use of a 10-nm-thick Si x N y capping layer on top of the Sc x Al 1-x N films aids in preventing etching during SAWR device photolithography and also helps hinder film oxidation up to 800°C.

36 MATERIALS SCIENCE↗

Laser shock peening effect on the dislocation transitions and grain refinement of Al–Mg–Si alloy

This paper systematically investigates the effect of laser shock peening without coating parameters on the microstructural evolution, and dislocation configurations induced by ultra-high plastic strains and strain rates. Based on an analysis of optical microscopy, polarized light microscopy, transmission electron microscopy observations and residual stress analysis, the significant influence of laser shock peening parameters due to the effect of plasma generation and shock wave propagation has been confirmed. Although the optical microscopy results revealed no significant microstructural changes after laser shock peening, i.e. no heat effect zone and differences in the distribution of second-phase particles, expressive influence of laser treatment parameters on the laser shock induced craters was confirmed. Moreover, polarized light microscopy results have confirmed the existence of well-defined longish grains up to 455 μm in length in the centre of the plate due to the rolling effect, and randomly oriented smaller grains (20 μm × 50 μm) in the surface due to the static recrystallization effect. Laser shock peening is reflected in an exceptional increase in dislocation density with various configurations, i.e. dislocation lines, dislocation cells, dislocation tangles, and the formation of dense dislocation walls. More importantly, the microstructure is considerably refined due to the effect of strain deformations induced by laser shock peening process. The results have confirmed that dense dislocation structures during ultra-high plastic deformation with the addition of shear bands producing ultra-fine (60–200 nm) and nano-grains (20–50 nm). Furthermore, dislocation density was increased by a factor of 2.5 compared to the untreated material (29 × 10{sup 13} m{sup −2} vs. 12 × 10{sup 13} m{sup −2}). - Highlights: • LSPwC imparts high compressive residual stresses up to − 362 ± 31 MPa. • After LSPwC the microstructure is considerably refined via dislocation transitions. • Results confirmed ultra-fine (60–200 nm) and nano-grains (20–50 nm) after LSPwC. • Reasonable agreements between dislocation density and residual stress are obtained.

36 MATERIALS SCIENCE↗

XtalCAMP: a comprehensive program for the analysis and visualization of scanning Laue X-ray micro-/nanodiffraction data

XtalCAMP is a software package based on the MATLAB platform, which is suitable for, but not limited to, the analysis and visualization of scanning Laue X-ray micro-/nanodiffraction data. The main objective of the software is to provide complementary functionalities to the Laue indexing software packages used at several synchrotron beamlines. Here, the graphical user interfaces allow the easy analysis of characteristic microstructure features, including real-time intensity mapping for a quick examination of phase, grain and defect distribution, 2D color-coded mapping of microstructural properties from the output of other Laue indexing software, crystal orientation visualization, grain boundary characterization based on orientation/misorientation calculation, principal strain/stress analysis, and strain ellipsoid representation, as well as a series of additional toolkits. As an example, XtalCAMP is applied to the microstructural investigation of a solution-heat-treated Ni-based superalloy manufactured using a laser 3D-printing technique, and a deformed natural quartzite from Val Bregaglia in the Central Alps.

36 MATERIALS SCIENCE↗

3D-microdiffraction: A facility for the Australian synchrotron

Phenomena occurring at the mesoscale, 0.1--10 {mu}m, e.g. polycrystallinity, crystal defects, grain boundaries, orientation and strain, can play a profound role in the bulk behaviour of materials. These properties have been extremely difficult to measure in the spatially resolved in situ real time mode critical to obtaining true understanding. The microdiffraction fluorescence probe, an end-station facility selected for the Australian synchrotron, will enable these properties to be measured, in 3D at submicron scale, correlated to composition (X-ray fluorescence) as well as local elemental coordination (X-ray absorption spectroscopy). This facility will have wide spread fundamental and applied application across the earth and material science communities.

43 PARTICLE ACCELERATORS↗

Characterization and Modeling of Grain Boundary Chemistry Evolution in Ferritic Steels under Irradiation

Ferritic/martensitic (FM) steels such as HT-9, T-91 and NF12 with chromium concentrations in the range of 9-12 at.% Cr and high Cr ferritic steels (oxide dispersion strengthened steels with 12-18% Cr) are receiving increasing attention for advanced nuclear applications, e.g. cladding and duct materials for sodium fast reactors, pressure vessels in Generation IV reactors and first wall structures in fusion reactors, thanks to their advantages over austenitic alloys. Predicting the behavior of these alloys under radiation is an essential step towards the use of these alloys. Several radiation-induced phenomena need to be taken into account, including phase separation, solute clustering, and radiation-induced segregation or depletion (RIS) to point defect sinks. RIS at grain boundaries has raised significant interest because of its role in irradiation assisted stress corrosion cracking (IASCC) and corrosion of structural materials. Numerous observations of RIS have been reported on austenitic stainless steels where it is generally found that Cr depletes at grain boundaries, consistently with Cr atoms being oversized in the fcc Fe matrix. While FM and ferritic steels are also subject to RIS at grain boundaries, unlike austenitic steels, the behavior of Cr is less clear with significant scatter and no clear dependency on irradiation condition or alloy type. In addition to the lack of conclusive experimental evidence regarding RIS in F-M alloys, there have been relatively few efforts at modeling RIS behavior in these alloys. The need for predictability of materials behavior and mitigation routes for IASCC requires elucidating the origin of the variable Cr behavior. A systematic detailed high-resolution structural and chemical characterization approach was applied to ion-implanted and neutron-irradiated model Fe-Cr alloys containing from 3 to 18 at.% Cr. Atom probe tomography analyses of the microstructures revealed slight Cr clustering and segregation to dislocations and grain boundaries in the ion-irradiated alloys. More significant segregation was observed in the neutron irradiated alloys. For the more concentrated alloys, irradiation did not affect existing Cr segregation to grain boundaries and segregation to dislocation loops was not observed perhaps due to a change in the dislocation loop structure with increasing Cr concentration. Precipitation of α’ was observed in the neutron irradiated alloys containing over 9 at.% Cr. However ion irradiation appears to suppress the precipitation process. Initial low dose ion irradiation experiments strongly suggest a cascade recoil effect. The systematic analysis of grain boundary orientation on Cr segregation was significantly challenged by carbon contamination during ion irradiation or by existing carbon and therefore carbide formation at grain boundaries (sensitization). The combination of the proposed systematic experimental approach with atomistic modeling of diffusion processes directly addresses the programmatic need for developing and benchmarking predictive models for material degradation taking into account atomistic kinetics parameters

36 MATERIALS SCIENCE↗

Twinning-detwinning behavior during cyclic deformation of magnesium alloy

In situ neutron diffraction has been used to examine the deformation mechanisms of a precipitation-hardened and extruded Mg-8.5wt.%Al alloy subjected to (i) compression followed by reverse tension (texture T1) and (ii) tension followed by reverse compression (texture T2). Two starting textures are used: (1) as-extruded texture, T1, in which the basal pole of most grains is normal to the extrusion axis and a small portion of grains are oriented with the basal pole parallel to the extrusion axis; (2) a reoriented texture, T2, in which the basal pole of most grains is parallel to the extrusion axis. For texture T1, the onset of extension twinning corresponds well with the macroscopic elastic-plastic transition during the initial compression stage. The non-linear macroscopic stress/strain behavior during unloading after compression is more significant than during unloading after tension. For texture T2, little detwinning occurs after the initial tension stage, but almost all of the twinned volumes are detwinned during loading in reverse compression.

36 MATERIALS SCIENCE↗

Magnetic structure of CaSrFeCoO6–δ: Correlations with structural order

Highlights: • Neutron diffraction shows that CaSrFeCoO{sub 6–δ} has G-type antiferromagnetic order at 10 K. • Magnetic moments are along the shortest axis at 10 K, contrary to the Ca{sub 2}-analogue, Ca{sub 2}FeCoO{sub 6–δ}. • CaSrFeCoO{sub 6–δ} retains the same orientation of moments up to 300 K, contrary to Ca{sub 2}FeCoO{sub 6–δ}. • CaSrFeCoO{sub 6–δ} has the optimum composition for G-type order and retention of the moment orientation. - Abstract: With the aid of neutron diffraction, the magnetic structure of CaSrFeCoO{sub 6–δ} is determined at 10 K and 300 K. The vacancies, created due to oxygen-deficiency, are ordered in this material. In addition to structural order, neutron diffraction shows a long-range G-type antiferromagnetic order, where each magnetic moment is aligned antiparallel to all nearest neighbors. The orientation of moments is along the shortest unit cell axis at 10 K. The magnetic structure and orientation of moments remain unchanged up to room temperature. This is in contrast to the Ca{sub 2}-analogue, Ca{sub 2}FeCoO{sub 6–δ}, where the magnetic moments at 10 K are parallel to the longest axis and change their orientation when temperature is raised to room temperature. These differences highlight the ability to control the magnetic properties by tuning the structural parameters. Comparisons to similar materials show that CaSrFeCoO{sub 6–δ} has the optimum composition for G-type magnetic order and the retention of the moment orientation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Local residual stresses and microstructure within recrystallizing grains in iron

The intragranular strains and the microstructure within recrystallizing grains in single phase pure iron have been systematically studied in 3D using synchrotron micro-diffraction. In contradiction to common knowledge we observe that residual elastic strains of up to 1–2 × 10 –3 are present in the recrystallizing grains. The local strain variations within individual grains can be similar in magnitude to those between different grains. The effects of processing parameters, including rolling reduction, recrystallized volume fraction, and cooling rate, as well as microstructural parameters, including grain size, orientation and internal misorientation, on the development of local residual elastic strains and microstructure have been quantified. It is suggested that the difference in local defect density between recrystallized grains and the surrounding deformed matrix, as well as the redistribution of medium to long-range residual stresses in the deformed grains, are the main reasons for the development of such strains in the recrystallized grains. The local residual stress levels are calculated and their possible impact on the mechanical properties and recrystallization processes are discussed.

36 MATERIALS SCIENCE↗