Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Free electron model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Assessing Implicit and Explicit Polarizable Solvation Models for Nuclear–Electronic Orbital Systems: Quantum Proton Polarization and Solvation Energetics

Accurate simulations of many chemical processes require the inclusion of both nuclear quantum effects and a solvent environment. The nuclear–electronic orbital (NEO) approach, which treats electrons and select nuclei quantum mechanically on the same level, combined with a polarizable continuum model (PCM) for the solvent environment, addresses this challenge in a computationally practical manner. In this work, the NEO-PCM approach is extended beyond the IEF-PCM (integral equation formalism PCM) and C-PCM (conductor PCM) approaches to the SS(V)PE (surface and simulation of volume polarization for electrostatics) and ddCOSMO (domain decomposed conductor-like screening model) approaches. IEF-PCM, SS(V)PE, C-PCM, and ddCOSMO all exhibit similar solvation energies as well as comparable nuclear polarization within the NEO framework. The calculations show that the nuclear density does not leak out of the molecular cavity because it is much more localized than the electronic density. Finally, the polarization of quantized protons is analyzed in both continuum solvent and explicit solvent environments described by the polarizable MB-pol model, illustrating the impact of specific hydrogen-bonding interactions captured only by explicit solvation. Furthermore, these calculations highlight the relationship among solvation formalism, nuclear polarization, and energetics.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

Atomic-scale visualization of a cascade of magnetic orders in the layered antiferromagnet GdTe3

Abstract GdTe 3 is a layered antiferromagnet which has attracted attention due to its exceptionally high mobility, distinctive unidirectional incommensurate charge density wave (CDW), superconductivity under pressure, and a cascade of magnetic transitions between 7 and 12 K, with as yet unknown order parameters. Here, we use spin-polarized scanning tunneling microscopy to directly image the charge and magnetic orders in GdTe 3 . Below 7 K, we find a striped antiferromagnetic phase with twice the periodicity of the Gd lattice and perpendicular to the CDW. As we heat the sample, we discover a spin density wave with the same periodicity as the CDW between 7 and 12 K; the viability of this phase is supported by our Landau free energy model. Our work reveals the order parameters of the magnetic phases in GdTe 3 and shows how the interplay between charge and spin can generate a cascade of magnetic orders.

36 MATERIALS SCIENCE↗
DOE OSTI2022

All-Carbon Nanotube Solar Cell Devices Mimic Photosynthesis

We report that both solar cells and photosynthetic systems employ a two-step process of light absorption and energy conversion. In photosynthesis, they are performed by distinct proteins. However, conventional solar cells use the same semiconductor for optical absorption and electron-hole separation, leading to inefficiencies. Here, we show that an all-semiconducting single-walled carbon nanotube (s-SWCNTs) device provides an artificial system that models photosynthesis in a tandem geometry. We use distinct chirality s-SWCNTs to separate the site and direction of light absorption from those of power generation. Using different bandgap s-SWCNTs, we implement an energy funnel in dual-gated p-n diodes. The device captures photons from multiple regions of the solar spectrum and funnels photogenerated excitons to the smallest bandgap s-SWCNT layer, where they become free carriers. We demonstrate an increase in the photoresponse by adding more s-SWCNT layers of different bandgaps without a corresponding deleterious increase in the dark leakage current.

14 SOLAR ENERGY↗
DOE OSTI2021

Ultrafast x-ray pump x-ray probe transient absorption spectroscopy: A computational study and proposed experiment probing core-valence electronic correlations in solvated complexes

Femtosecond X-ray pump X-ray probe experiments are currently possible at free electron lasers such as the linac coherent light source (LCLS), which opens new opportunities for studying solvated transition metal-ligand complexes. In order to make the most effective use of these kinds of experiments, it is necessary to determine which chemical properties an X-ray pump pulse will measure. In this paper, we have combined electron cascade calculations and excited-state time-dependent density functional theory calculations to predict the initial state prepared by an X-ray pump and the subsequent X-ray probe spectra at the Fe K-edge in the solvated model transition metal complex, K 4 Fe II (CN) 6 . We find several key spectral features that report on the ligand-field splitting, solvent-solute interactions, and the 3p and 3d electron interactions. We then show how these features could be measured in an experiment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Characterization of Low-energy Ionization Signals in Silicon Detectors for the Nab Experiment

The Nab (Neutron a b) experiment is designed to measure the beta-antineutrino angular correlation in free neutron 𝛽 decay with an ultimate precision goal of 0.1%, providing input for tests of Cabibbo-Kobayashi-Maskawa matrix unitarity. This measurement is performed via detection of electrons and protons in delayed coincidence using custom large-area segmented silicon detectors. We present the characterization of one such detector system to establish the proton energy and timing response, using a dedicated proton accelerator. The detected proton peak was studied for 25, 30, and 35 keV incident protons on a set of detector segments and multiple cooling cycles over a one-year period. Ionization losses were consistent with models of the detector dead layer with thicknesses less than 100 nm. The detected proton peak was stable within the uncertainty from energy calibration (0.25 keV). The rise times of detector pulses from 109Cd and 113Sn conversion electron sources were used to extract the impurity density profile and establish a precise model for the detector timing response. The observed impurity density profile varied from (2±2)×109/cm3 at the center to (26±2)×109/cm3 at the edge. This impurity density profile was then used to characterize systematic effects in proton time-of-flight measurements due to detector pulse-shape effects; the resultant proton timing systematic uncertainties were below 0.3 ns, which is sufficient for the Nab experiment.

Taylor, RJ [North Carolina State University]↗
DOE OSTI2025

Machine learning-enabled multiscale modeling of mechanical deformation of aluminum and Al-SiC nanocomposites

A machine learning-enabled multiscale framework is developed for modeling the mechanical response of both pure metal and nanoparticle-reinforced metal matrix nanocomposites (MMNCs). Using aluminum–silicon carbide (Al-SiC) as an example MMNC, atomistic simulations reveal three distinct deformation mechanisms (i.e., defect-free, dislocation-based, and interface separation) governed by the interfaces between the Al matrix and SiC nanoparticles. As compared with single crystal Al, the lattice undergoes a more abrupt failure once the dislocation network becomes extensive and void nucleation initiates, whereas in Al-SiC, nanoparticle interfaces enable a more gradual progression of damage. These mechanisms are captured through a combined classification-regression neural network surrogate model that bridges atomic-scale insights with continuum-scale finite element analysis. Machine learning-enabled multiscale modeling of pure Al accurately predicted strain localization and confirmed by in-situ scanning electron microscopic tensile testing on perforated Al specimens. This study underscores the promise of integrating physics-informed machine learning with hierarchical modeling to capture the interface dominated phenomena and guide the design of advanced MMNCs.

Al-SiC↗
DOE OSTI2025

Cavity electrodynamics of van der Waals heterostructures

Van der Waals heterostructures host many-body quantum phenomena that are tunable in situ using electrostatic gates. Their constituent two-dimensional materials and gates can naturally form plasmonic self-cavities, confining light in standing waves of current density due to finite-size effects. The plasmonic resonances of typical graphite gates fall in the gigahertz to terahertz range, corresponding to the same microelectronvolt to millielectronvolt energy scale as the phenomena in van der Waals heterostructures that they electrically control. This raises the possibility that the built-in cavity modes of graphite gates are relevant for shaping the low-energy physics of these heterostructures. However, probing these cavity-coupled electrodynamics is challenging as devices are notably smaller than the diffraction limit at the relevant wavelengths. Here we report on the intrinsic cavity conductivity of gate-tunable graphene heterostructures. As the carrier density is tuned, we observe coupling and spectral weight transfer between graphene and graphite plasmonic cavity modes in the ultrastrong coupling regime. We present an analytical model to describe the results and provide general principles for cavity design. Our findings show that intrinsic cavity effects are important for understanding the low-energy electrodynamics of van der Waals heterostructures and open a pathway for useful functionality through cavity control.

Electronic properties and materials↗
DOE OSTI2025

PUFFIn Software Modeling for Quality Management

PUFFIn (PENELOPE User Friendly Fast Interface) was designed as a fast and simple Monte Carlo simulation tool for the transport of photons and electrons, with a primary purpose as a learning and education tool for a broad range of static configurations in the radiation processing industry. Development of the PUFFIn software is funded by the Office of Radiological Security (ORS) within the United States National Nuclear Security Administration (NNSA). PUFFIn helps fill the education and knowledge gaps in the industry, as identified in reports by Fermilab (2017) and the IAEA (2020). PUFFIn uses the PENELOPE (NEA-2023) physics engine to perform simulations on static configurations. PUFFIn has support for multiple geometry types from simple, single material simulations to full 3D configurations created from CAD input files or images from X-Ray Tomography scans. PUFFin was designed to be easy for the novice user, it will generate the input and geometry files required by PENLOPE and will display the output plots within the PUFFIn interface. PUFFin is distributed for free but requires a free workshop so users can be adequately trained in its use. Workshops have been presented in the past at Texas A&M university, the Aerial-CRT facility in Strasbourg France and Jakarta Indonesia. PUFFIn simulations have been validated by 10 MeV ebeam experiments done at Aerial-CRT in France (Radiation Physics and Chemistry 222 (2024) 111774). Further user experimental comparisons were made at the medical product hands on workshop at Texas A&M in October 2024.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

Gate-free state preparation for fast variational quantum eigensolver simulations

Abstract The variational quantum eigensolver is currently the flagship algorithm for solving electronic structure problems on near-term quantum computers. The algorithm involves implementing a sequence of parameterized gates on quantum hardware to generate a target quantum state, and then measuring the molecular energy. Due to finite coherence times and gate errors, the number of gates that can be implemented remains limited. In this work, we propose an alternative algorithm where device-level pulse shapes are variationally optimized for the state preparation rather than using an abstract-level quantum circuit. In doing so, the coherence time required for the state preparation is drastically reduced. We numerically demonstrate this by directly optimizing pulse shapes which accurately model the dissociation of H 2 and HeH + , and we compute the ground state energy for LiH with four transmons where we see reductions in state preparation times of roughly three orders of magnitude compared to gate-based strategies.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Characterization of the Formability of High-Purity Polycrystalline Niobium Sheets for Superconducting Radiofrequency Applications

The forming limit diagram (FLD) of high-purity niobium sheets used for the manufacturing of superconducting radiofrequency (SRF) cavities is presented. The Marciniak (in-plane) test was used with niobium blanks with a thickness of 1 mm and blank carriers of annealed oxygen-free electronic (OFE) copper. A high formability was measured, with an approximate true major strain at necking for plane strain of 0.44. The high formability of high-purity niobium is likely caused by its high strain rate sensitivity of 0.112. Plastic strain anisotropies (r-values) of 1.66, 1.00, and 2.30 were measured in the 0 deg, 45 deg, and 90 deg directions. However, stress–strain curves at a nominal strain rate of ~10 –3 s –1 showed similar mechanical properties in the three directions. Theoretical calculations of the forming limit curves (FLCs) were conducted using an analytical two-zone model. The obtained results indicate that the anisotropy and strain rate sensitivity of niobium affect its formability. The model was used to investigate the influence of strain rate on strains at necking. The obtained results suggest that the use of high-speed sheet forming should further increase the formability of niobium.

mechanical behavior↗
DOE OSTI2024

Critical slowing of the spin and charge density wave order in thin film Cr following photoexcitation

We report on the evolution of the charge density wave (CDW) and spin density wave (SDW) orders of a chromium film following photoexcitation with an ultrafast optical laser pulse. The CDW is measured by ultrafast time-resolved x-ray diffraction of the CDW satellite that tracks the suppression and recovery of the CDW following photoexcitation. We find that as the temperature of the film approaches a discontinuous phase transition in the CDW and SDW orders, the time scales of recovery increase exponentially from the expected thermal time scales. We extend a Landau model for SDW systems to account for this critical slowing with the appropriate boundary conditions imposed by the geometry of the thin film system. This model allows us to assess the energy barrier between the available CDW/SDW states with different spatial periodicities.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Multi-messenger dynamic imaging of laser-driven shocks in water using a plasma wakefield accelerator

Understanding dense matter hydrodynamics is critical for predicting plasma behavior in environments relevant to laser-driven inertial confinement fusion. Traditional diagnostic sources face limitations in brightness, spatiotemporal resolution, and in their ability to detect relevant electromagnetic fields. In this work, we present a dual-probe, multi-messenger laser wakefield accelerator platform combining ultrafast X-rays and relativistic electron beams at 1 Hz, to interrogate a free-flowing water target in vacuum, heated by an intense 200 ps laser pulse. This scheme enables high-repetition-rate tracking the evolution of the interaction using both particle types. Betatron X-rays reveal a cylindrically symmetric shock compression morphology assisted by low-density vapor, resembling foam-layer-assisted fusion targets. The synchronized electron beam detects time-evolving electromagnetic fields, uncovering charge separation and ion species differentiation during plasma expansion – phenomena not captured by photons or hydrodynamic simulations. We show that combining both probes provides complementary insights spanning kinetic to hydrodynamic regimes, highlighting the need for hybrid physics models to accurately predict fusion-relevant plasma behavior.

imaging techniques↗
DOE OSTI2024

Question-answering system extracts information on injection drug use from clinical notes

Background. Injection drug use (IDU) can increase mortality and morbidity. Therefore, identifying IDU early and initiating harm reduction interventions can benefit individuals at risk. However, extracting IDU behaviors from patients’ electronic health records (EHR) is difficult because there is no other structured data available, such as International Classification of Disease (ICD) codes, and IDU is most often documented in unstructured free-text clinical notes. Although natural language processing can efficiently extract this information from unstructured data, there are no validated tools. Methods. Here, to address this gap in clinical information, we design a question-answering (QA) framework to extract information on IDU from clinical notes for use in clinical operations. Our framework involves two main steps: (1) generating a gold-standard QA dataset and (2) developing and testing the QA model. We use 2323 clinical notes of 1145 patients curated from the US Department of Veterans Affairs (VA) Corporate Data Warehouse to construct the gold-standard dataset for developing and evaluating the QA model. We also demonstrate the QA model’s ability to extract IDU-related information from temporally out-of-distribution data. Results. Here, we show that for a strict match between gold-standard and predicted answers, the QA model achieves a 51.65% F1 score. For a relaxed match between the gold-standard and predicted answers, the QA model obtains a 78.03% F1 score, along with 85.38% Precision and 79.02% Recall scores. Moreover, the QA model demonstrates consistent performance when subjected to temporally out-of-distribution data. Conclusions. Our study introduces a QA framework designed to extract IDU information from clinical notes, aiming to enhance the accurate and efficient detection of people who inject drugs, extract relevant information, and ultimately facilitate informed patient care.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2024

Towards engineering the growth morphology of anisotropic bicrystals

Eutectic alloys, such as Pb-free Bi-Sn-Ag or Sn-Ag-Cu, are essential for their low melting points in solder joints but suffer from brittle intermetallic phases, reducing reliability. Traditional solder design relies on equilibrium phase diagrams, often neglecting the kinetic influence of crystalline anisotropy during solidification. This study hypothesizes that the energetics at the solid-solid-liquid trijunction dictate crystalline facet selection. Using the Al-Al 3 Ni alloy as a model, this project combines atomistic simulations and experimental methods to understand interfacial energies and develop predictive models. This approach aims to mitigate the negative effects of intermetallics, enhancing component reliability in electronic applications.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Structural Evolution of Mixed-Addenda Keggin Polyoxometalate Anions with Atom-by-Atom Substitution

Polyoxometalates (POMs) are molecular metal oxides with distinctive electronic properties that make them promising materials for applications in energy, sensors, and memory devices. One of the most promising methods of tuning the stability, photochromic, redox, and electron-spin properties of POMs is through the substitution of the metal “addenda” atoms that, along with oxygen, constitute their cage-like structures. Because traditional synthesis methods typically produce a distribution of POMs, the isolation and characterization of multimetallic POMs with predetermined stoichiometry remains challenging. The presence of multiple energetically accessible isomers further complicates the experimental characterization and theoretical modeling of multimetallic POMs. Herein, we leverage the distinguishing mass-selection capabilities of ion soft landing to prepare stoichiometrically selected Keggin PMo x W 12-x O 40 3- (x = 0 – 6, 8, 10, and 12) POMs on self-assembled monolayer surfaces free of the solvent molecules and counterions that often confound characterization of complex species at interfaces. The structures of the supported POMs are characterized with atom-by-atom precision using in situ infrared (IR) reflection absorption spectroscopy complemented by detailed density functional theory calculations. Our joint experimental and theoretical results reveal an almost linear shift in the positions of the IR bands towards lower wavenumbers with an increase in the number of lighter molybdenum atoms compared to heavier W atoms in PMoxW 12-x O 40 3- . The theoretical calculations also indicate that numerous isomeric structures may be populated at the experimental conditions and, consequently, contribute to the overall IR spectra. In conclusion, our findings indicate that in addition to the number of substituted addenda atoms and the presence of multiple isomeric structures, interactions with the surface play an important role in determining the IR spectra and structure of supported bimetallic POMs.

Prabhakaran, Venkateshkumar [Pacific Northwest Nat↗
DOE OSTI2020

Spatially Resolved Persistent Photoconductivity in MoS2–WS2 Lateral Heterostructures

The optical and electronic properties of 2D semiconductors are intrinsically linked via the strong interactions between optically excited bound species and free carriers. Here we use near-field scanning microwave microscopy (SMM) to image spatial variations in photoconductivity in MoS 2 –WS 2 lateral multijunction heterostructures using photon energy-resolved narrowband illumination. We find that the onset of photoconductivity in individual domains corresponds to the optical absorption onset, confirming that the tightly bound excitons in transition metal dichalcogenides can nonetheless dissociate into free carriers. These photogenerated carriers are most likely n-type and are seen to persist for up to days. Informed by finite element modeling we reveal that they can increase the carrier density by up to 200 times. This persistent photoconductivity appears to be dominated by contributions from the multilayer MoS 2 domains, and we attribute the flake-wide response in part to charge transfer across the heterointerface. Spatial correlation of our SMM imaging with photoluminescence (PL) mapping confirms the strong link between PL peak emission photon energy, PL intensity, and the local accumulated charge. This work reveals the spatially and temporally complex optoelectronic response of these systems and cautions that properties measured during or after illumination may not reflect the true dark state of these materials but rather a metastable charged state.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Nodal hybridization in a two-dimensional heavy-fermion material

Metals with partially filled core atomic shells can form quasiparticles at a low temperature arising from the hybridization of the core level and conduction electrons. The thermodynamic and spectroscopic properties of these metals can be understood as those of a simple metal, but with a significant mass enhancement over the free electron mass—commonly referred to as heavy fermions. In most heavy-fermion materials, the hybridization is approximately isotropic in position and momentum space. However, a combination of low dimensionality and symmetry properties of the core-level wavefunctions can give rise to highly anisotropic electronic interactions with the conduction electrons. Here, in this study, we demonstrate anisotropic hybridization that vanishes along specific directions in momentum space—referred to as nodes—in a lanthanide-based two-dimensional van der Waals heavy-fermion compound, CeSiI. Quasiparticle interference measurements reveal a set of discrete hotspots with high spectral intensity on the Fermi surface. Theoretical modelling and comparison with the quasiparticle interference pattern of the non-heavy-fermion isostructural analogue LaSiI suggest that these features arise from an unconventional electron interaction involving hybridization nodes unique to CeSiI. As a result, the effective mass of the quasiparticles varies by orders of magnitude depending on their direction in momentum space.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Ultrathin liquid sheets: water gets in shape for VUV absorption

We present absorption spectra of thin, free-flowing liquid sheets in the vacuum ultraviolet energy range using a gas-squeezed liquid jet. Compared to liquid flow cells, operation without transmission windows eliminates restrictions on the energy range. The temperature of the water sheet is estimated at 0 ± 3 °C, at the verge of the supercooled regime. By adjusting flow conditions in situ, we recorded absorption spectra at water sheet thicknesses ranging from 20 to 50 nm. We show that the absorption spectra of thin jets contain significant contributions from interference effects that need to be deconvoluted from spectral contributions due to the electronic structure. We employ a Fresnel propagation model to model the spectral changes and understand the impact of thickness variations and thin film interference. This opens the door for the investigation of solvation, interface, and similar effects by recording valence band spectra.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗