Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Field electron emission”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

The temporal evolution of a small auroral substorm as viewed from high altitudes with Dynamics Explorer 1

A small auroral substorm is investigated with auroral imaging photometers carried on the spacecraft Dynamics Explorer 1. Initial brightening along the auroral oval and the subsequent westward and poleward motions of intense, localized emission regions are associated with auroral surges. Following substorm onset, another region of less intense emissions is observed to develop at lower latitudes and adjacent to the bright region near local midnight. This second region expands toward the east. The bright zone of auroral emissions associated with the surges is interpreted as the signature of electron acceleration along magnetic field lines threading the boundary layer of the plasma sheet in the magnetotail. The more diffuse, less intense region is identified with eastward-drifting electrons injected into the plasma sheet and ring current following substorm onset. No rapid poleward motion of the discrete aurora is detected during substorm recovery.

Craven, J. D.↗
NASA NTRS1986

Energy of microwave-emitting electrons and hard x-ray/microwave source model in solar flares

Based on the rate of increse of the microwave flux relative to the hard X-ray flux at various energies from the onset to the peak of a flare, the mean energy of microwave-emitting electrons is estimated for 22 flares observed simultaneously in hard X-rays and microwaves. The energy of electrons varying in proportion to the 17 GHz emission is found to concentrate below 100 keV, and the mean energy or eletrons emitting 70 keV x-rays is less than about 130 keV for thin-target and less than about 180 keV for thick-target emission models, suggesting that the 17 GHz emission derives from electrons with energy of less than a few hundred keV. The magnetic field strength in the microwave source is found to be 500-1000 G for the thick-target and 1000-2000 G for the thin-target case, and 16 of the 22 events examined can be successfully explained by the thick-target model. Of the six events which cannot be explained by the thick-target model, two events give L of less than about 300 km.

Nitta, N.↗
NASA NTRS2003

Three-Dimensional Morphological Analysis of ALH84001 Magnetite Using Electron Tomography

We report here the crystal morphologies of MV-1 and ALH84001 magnetites as calculated by back-projection using electron tomography. In the present study, we used a 300 keV TEM with a field emission gun (Tecnai F-30 from FEI Inc.), equipped with a 2048 x 2048 pixel CCD camera from Gatan Inc. to image magnetite crystals over tilt ranges of approx. +/- 72 deg in 2 deg tilt intervals. The images were aligned for back-projection, either manually, or through the use of fiducial 5 nm Au spheres affixed to the specimen prior to microscopy. Three-dimensional (3-D) reconstructions were computed using weighted back-projection of the tilted views. The tomograms were viewed and analyzed as a series of slices 1.0 nm thick, taken parallel to the specimen-supporting grid, using the IMOD software package. The shape of each magnetite crystal was determined by defining the external contour of a given magnetite in each slice and assembling a stack of these contours in 3-D. To aid in visualization, the stacked contour array was reduced to an optimal mesh by Delaunay triangulation. The surface normal to each of the triangles in the mesh was calculated and the triangle faces colored according to the orientation of that surface normal relative to the principal crystallographic axis of magnetite. Green surfaces correspond to {111} orientations, blue surfaces to {100} orientations, and red surfaces to {110} orientations. Triangles whose surface normal did not correspond to one of the principal axes were colored gray. Within the experimental and numerical uncertainties of the deconvolution, the tomographic reconstruction of both MV-1 and ALH84001 magnetites are equivalent and correspond to a truncated hexa-octahedral morphology.

Thomas-Keprta, Kathie L.↗
DOE OSTI2024

Limits on dark matter annihilation from the shape of radio emission in M31

Well-motivated models of dark matter often result in a population of electrons and positrons within galaxies produced through dark matter annihilation — usually in association with gamma rays. As they diffuse through galactic magnetic fields, these e ± produce synchrotron radio emission. The intensity and morphology of this signal depends on the properties of the interstellar medium through which the e ± propagate. Using observations of the Andromeda Galaxy (M31) to construct a model of the gas, magnetic fields, and starlight, we set constraints on dark matter annihilation to b$\overline{b}$ using the morphology of 3.6 cm radio emission. As the emission signal at the center of M31 is very sensitive to the diffusion coefficient and dark matter profile, we base our limits on the differential flux in the region between 0.9 – 6.9 kpc from the center. We exclude annihilation cross sections ≳ 3 × 10 −25 cm 3 /s in the mass range 10 – 500 GeV, with a maximum sensitivity of 7 × 10 −26 cm 3 /s at 20 – 40 GeV. Though these limits are weaker than those found in previous studies of M31, they are robust to variations of the diffusion coefficient.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1972

Energetic electrons from solar flares and associated type 3 radio bursts from metric to hectometric wave frequencies

Distinct Kev electron events as observed by satellites near the earth are, in general, associated with solar flares which are accompained by the emission of both metric and hectometric type 3 radio bursts. The positions of these flares are mainly on the western hemisphere of the sun. These results show that Kev electrons propagate under the control of the magnetic field in the interplanetary space and that, while propagating through this space, these electrons excite type 3 radio bursts from metric to hectometric wave frequencies. Emission characteristics of hectometric type 3 bursts are briefly considered in relation to the positions of associated flares.

Sakurai, K.↗
NASA NTRS2001

Sunlit Io Atmospheric [O I] 6300 A and the Plasma Torus

A large database of sunlit Io [O I] 6300A emission, acquired over the period 1990-1999, with extensive coverage of Io orbital phase angle phi and System III longitude lambda(sub III), exhibits significant long-term and short-term variations in [O I] 6300A emission intensities. The long-term average intensity shows a clear dependence on lambda(sub III), which establishes conclusively that the emission is produced by the interaction between Io's atmosphere and the plasma torus. Two prominent average intensity maxima, 70 deg to 90 deg wide, are centered at lambda(sub III) about 130deg. and about 295 deg. A comparison of data from October 1998 with a three-dimensional plasma torus model, based upon electron impact excitation of atomic oxygen, suggests a basis for study of the torus interaction with Io's atmosphere. The observed short-term, erratic [O I] 6300A intensity variations fluctuate approximately 20% to 50% on time scale of tens of minutes with less frequent fluctuations of a factor of about 2. The most likely candidate to produce these fluctuations is a time-variable energy flux of field-aligned nonthermal electrons identified recently in Galileo PLS data. If true, the short-term [O I] intensity fluctuations may be related to variable field-aligned currents driven by inward and outward torus plasma transport and/or transient high-latitude, field-aligned potential drops. A correlation between the intensity and emission line width indicates molecular dissociation may contribute significantly to the [O I] 6300A emission. The nonthermal electron energy flux may produce O(1-D) by electron impact dissociation of SO2 and SO, with the excess energy going into excitation of O and its kinetic energy. The [O I] 6300A emission database establishes Io as a valuable probe of the torus, responding to local conditions at Io's position.

Oliversen, Ronald J.↗
DOE OSTI2024

Inducing Circularly Polarized Single-Photon Emission via Chiral-Induced Spin Selectivity

One of the central aims of the field of spintronics is the control of individual electron spins to effectively manage the transmission of quantized data. One well-known mechanism for controlling electronic spin transport is the chiral-induced spin-selectivity (CISS) effect in which a helical nanostructure imparts a preferential spin orientation on the electronic transport. One potential application of the CISS effect is as a transduction pathway between electronic spin and circularly polarized light within nonreciprocal photonic devices. Here in this work, we identify and quantify the degree of chiral-induced spin-selective electronic transport in helical polyaniline films using magnetoconductive atomic force microscopy (mcAFM). We then induce circularly polarized quantum light emission from CdSe/CdS core/shell quantum dots placed on these films, demonstrating a degree of circular polarization of up to ~21%. Utilizing time-resolved photoluminescence microscopy, we measure the radiative lifetime difference associated with left- and right-handed circular polarizations of single emitters. These lifetime differences, in combination with Kelvin probe mapping of the variation of surface potential with magnetization of the substrate, help establish an energy level diagram describing the spin-dependent transport pathways that enable the circularly polarized photoluminescence.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Effect of Strongly Magnetized Electrons and Ions on Heat Flow and Symmetry of Inertial Fusion Implosions

This Letter presents the first observation on how a strong, 500 kG, externally applied B field increases the mode-two asymmetry in shock-heated inertial fusion implosions. Using a direct-drive implosion with polar illumination and imposed field, we observed that magnetization produces a significant increase in the implosion oblateness (a 2.5 × larger P2 amplitude in x-ray self-emission images) compared with reference experiments with identical drive but with no field applied. Here, the implosions produce strongly magnetized electrons (ω e τ e >> 1) and ions (ω i τ i > 1) that, as shown using simulations, restrict the cross field heat flow necessary for lateral distribution of the laser and shock heating from the implosion pole to the waist, causing the enhanced mode-two shape.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1976

High resolution spectral analysis of the Jovian decametric radiation. II - The band-like emissions

Analysis of the bandlike Jovian decametric emission is presented. A model for the active region that accounts for the observed radiation characteristics is described using the measured parameters of the bandlike emission and a model of the Jovian magnetic field. The active region is characterized not only by the fact that an upward-flowing electron stream is caused to radiate in this region, but the stream itself is broken into radiating electron bunches within the active region. Observed undulations of the emission band on the time-frequency plane are interpreted as motions of the active region along a flux tube. The instantaneous location of the active region along the flux tube shows a dependence on the density of the stream entering the active region. The mechanism responsible for density modulation of the stream appears to be common to both the bandlike and simple-S-burst emission types.

Flagg, R. S.↗
DOE OSTI2022

Conversion of Classical Light Emission from a Nanoparticle‐Strained WSe 2 Monolayer into Quantum Light Emission via Electron Beam Irradiation

Abstract Solid‐state single photon emitters (SPEs) within atomically thin transition metal dichalcogenides (TMDs) have recently attracted interest as scalable quantum light sources for quantum photonic technologies. Among TMDs, WSe 2 monolayers (MLs) are promising for the deterministic fabrication and engineering of SPEs using local strain fields. The ability to reliably produce isolatable SPEs in WSe 2 is currently impeded by the presence of numerous spectrally overlapping states that occur at strained locations. Here nanoparticle (NP) arrays with precisely defined positions and sizes are employed to deterministically create strain fields in WSe 2 MLs, thus enabling the systematic investigation and control of SPE formation. Using this platform, electron beam irradiation at NP‐strained locations transforms spectrally overlapped sub‐bandgap emission states into isolatable, anti‐bunched quantum emitters. The dependence of the emission spectra of WSe 2 MLs as a function of strain magnitude and exposure time to electron beam irradiation is quantified and provides insight into the mechanism for SPE production. Excitons selectively funnel through strongly coupled sub‐bandgap states introduced by electron beam irradiation, which suppresses spectrally overlapping emission pathways and leads to measurable anti‐bunched behavior. The findings provide a strategy to generate isolatable SPEs in 2D materials with a well‐defined energy range.

2D material↗
NASA NTRS1987

Electron cyclotron harmonic waves observed by the AMPTE-IRM plasma wave experiment following a lithium release in the solar wind

An unexpected occurrence following the second lithium release by the AMPTE-IRM spacecraft in the solar wind on September 20, 1984, was the appearance of electron cyclotron harmonic emissions. These emissions began about 50 s after the release and continued for several minutes. Narrow-band emissions polarized perpendicular to the magnetic field with amplitudes of approximately 0.00001 V/m were observed in each of the first five harmonic bands. The diffuse emissions extended from below the lowest measured frequency channel to above the highest narrow-band emission with a maximum below the electron cyclotron frequency. It will be shown that these observations are inconsistent with their generation by several ion beam instabilities.

Roeder, J. L.↗
DOE OSTI2021

Functionalized carbon nanotubes for thermionic emission and cooling applications

Barium strontium oxide-coated carbon nanotubes (CNTs) were implemented as a work function lowering and field enhancing functional coating on a coiled tungsten filament to create a new thermionic cathode. This cathode resembles conventional oxide cathodes in structure. It has the same coiled tungsten filament as a conventional oxide cathode but uses barium strontium oxide-coated CNTs instead of the traditional barium strontium calcium oxide powder mixture as an emissive coating. The cathode produces a strong thermionic emission. At 1395 K and 2.5 V/μm, the thermionic emission current of 0.87 A or current density of 2.9 A/cm 2 was obtained from this oxide-coated CNT cathode. This level of emission is about three times as large as a conventional oxide cathode operating at similar temperature and field strength. Strong thermionic emissions from the cathode also lead to a large thermionic cooling effect. Temperature reduction as large as 90° was observed from the cathode surface when it was emitting electrons. Strong thermionic emission and a large cooling effect obtained are the result of the combination of the low work function of barium strontium oxide (1.6 eV) and the large field effect induced by the CNTs. Plasma enhanced chemical vapor deposition was used to grow CNTs, and magnetron sputtering deposition was used to deposit the barium strontium oxide functional coating; details of the cathode fabrication are presented to illustrate both the versatility of the processing techniques and the adaptability of barium strontium oxide-coated CNTs as a functional coating. Finally, measurements on thermionic emission and thermionic cooling of the cathode are also presented.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Size- and Phase-Controlled Nanometer-Thick ß-Ga2O3 Films with Green Photoluminescence for Optoelectronic Applications

Realization and optimization of the tunable/enhanced optical properties is critical to further advance the field of optoelectronics, photonics, and nano-electronics. In this context, here, we demonstrate green-emission characteristics with a ~30 fold enhancement in selectively engineered nanocrystalline Ga2O3 with a control over size, phase and interface nanostructure. Pulsed-laser-deposited ß-phase Ga2O3 films with an average crystallite size of ~9 nm along with a highly dense, close-compact nano-columnar structure with lowest possible defect density facilitates the thirty-fold enhancement in the photoluminescence (PL) intensity in green-region. Enhanced PL-emission in the optimized, engineered nano-architecture sheds light in designing Ga2O3-materials for promising future optoelectronic/photocatalytic applications.

Ga2O3, Nanocrystalline Films, Pulsed-Laser Deposit↗
DOE OSTI2024

Simulations of field emitters and multipacting in PIP-II Single Spoke Resonator Type-2

It has been found in benchmark tests that some Single Spoke Resonator Type-2 (SSR2) cavities have early field emission onset as well as strong multipacting barriers. A longstanding hypothesis is that field-emitted electrons in the high electric field accelerating gap can migrate and ignite multipacting bands in the low electric field regions of the cavity periphery. In this study, we use simulation techniques to examine multipacting behavior in SSR2 cavities from electrons seeded in common field emitter locations. Additionally, we investigated seed locations for areas in SSR2 cavities which may have poor coverage during high pressure water rinsing and compared the multipacting behavior.

43 PARTICLE ACCELERATORS↗
DOE OSTI2022

Limits on X-Ray Polarization at the Core of Centaurus A as Observed with the Imaging X-Ray Polarimetry Explorer

We present measurements of the polarization of X-rays in the 2–8 keV band from the nucleus of the radio galaxy Centaurus A (Cen A), using a 100 ks observation from the Imaging X-ray Polarimetry Explorer (IXPE). Nearly simultaneous observations of Cen A were also taken with the Swift, NuSTAR, and INTEGRAL observatories. No statistically significant degree of polarization is detected with IXPE. These observations have a minimum detectable polarization at 99% confidence (MDP 99 ) of 6.5% using a weighted, spectral model-independent calculation in the 2–8 keV band. The polarization angle ψ is consequently unconstrained. Spectral fitting across three orders of magnitude in X-ray energy (0.3–400 keV) demonstrates that the SED of Cen A is well described by a simple power law with moderate intrinsic absorption (N H ~ 10 23 cm -2 ) and a Fe Kα emission line, although a second unabsorbed power law is required to account for the observed spectrum at energies below 2 keV. This spectrum suggests that the reprocessing material responsible for this emission line is optically thin and distant from the central black hole. Our upper limits on the X-ray polarization are consistent with the predictions of Compton scattering, although the specific seed photon population responsible for the production of the X-rays cannot be identified. The low polarization degree, variability in the core emission, and the relative lack of variability in the Fe Kα emission line support a picture where electrons are accelerated in a region of highly disordered magnetic fields surrounding the innermost jet.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1966

Improved design provides faster response time in photomultiplier

Dynamic Crossed-Field Electron Multiplying /DCFEM/ light demodulator avoids the normal response time limitations inherent in static field devices by using time varying crossed electric and static magnetic fields. This eliminates the transit time spread that affects electrons as they proceed along the secondary emission stages of the tube.

Source record↗
NASA NTRS1973

Theory of decametric radio emissions from Jupiter.

It is suggested that the Jovian decametric emissions (DAM) originate in a cyclotron instability of weakly relativistic electrons trapped in the Jovian magnetic field. The resulting radiation has a group velocity in the magnetospheric plasma which may be of order 100 km/sec, and thus takes much more time to escape the magnetosphere than if the group velocity were at or near the speed of light. Therefore, the asymmetry of the Io phase with respect to sources east and west of the Earth-Jupiter line does not imply an asymmetric beaming of DAM; it is caused by the delay the waves experience in traversing the magnetosphere. The frequency drifts of milli- and decasecond bursts are also explained.

Wu, C. S.↗
NASA NTRS1978

Helium /3/ rich solar flares

Several aspects of a solar flare model that emphasizes evidence for the formation of current filaments as mechanisms of field dissipation are discussed. The origin of flare magnetic fields is considered, along with the thermal distribution, electron density, and high-energy X ray emission of flares. It is suggested that the extreme He-3 enrichment in some solar flares is due to spallation and the subsequent confinement of spallation products in a high-temperature high-density plasma associated with the magnetic instability that produces the flare. A current filament is assumed to produce the spallation and maintain the temperature that yields the high-energy X-ray spectrum and depletes the isotopes D, Li, Be, and B, as observed.

Colgate, S. A.↗