Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Energy absorption”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Microwave-assisted pyrolysis of liquid hydrocarbons using iron-based alumina catalysts obtained by solution combustion synthesis: The effect of synthesis parameters

The microwave-absorbing and catalytic properties of iron-based alumina (FeAl x O y ) materials have enabled their use as catalysts for the microwave-assisted generation of hydrogen and carbon via pyrolysis of hydrocarbons. Solution combustion synthesis (SCS) is a promising method to fabricate these materials, but the pyrolysis performance still needs to be improved. The present work investigated how altering the SCS parameters affects the pyrolysis of diesel fuel, gasoline, and crude oil. Two fuels (citric acid and glycine), four Fe:Al molar ratios, and two heating modes (hotplate and furnace) were tested. Fe/γ-Al 2 O 3 and Fe/β-SiC catalysts were prepared via incipient wetness impregnation for comparison. Among the three fossil fuels tested, diesel fuel yielded the highest amounts of H 2 and least amounts of CO x . The choice of fuel for the SCS process and the Fe/Al ratio strongly affected pyrolysis performance as they influence properties important for both catalysis and microwave absorption. The use of glycine resulted in catalysts that exhibited high H 2 yield and low CO 2 generation, which is explained by the revealed structural differences. The increase in the Fe:Al molar ratio accelerated microwave heating by adding more magnetic loss but also increased the amount of CO x . When the optimal SCS parameters were used, FeAl x O y catalysts outperformed Fe/γ-Al 2 O 3 and Fe/β-SiC. The high H 2 generation efficiency of the SCS catalysts is explained by their enhanced microwave-absorption properties. Scanning electron microscopy and energy dispersive X-ray spectroscopy revealed the formation of large-diameter CNTs via the tip-growth mechanism. The regeneration of SCS catalysts was demonstrated via the Boudouard reaction.

Carbon nanotubes↗
DOE OSTI2022

Size Dependent Optical Properties and Structure of ZnS Nanocrystals Prepared from a Library of Thioureas

Here, ZnS nanocrystals (λ max (1S e -1S 3/2h ) = 260 - 320 nm, d = 1.7 - 10.0 nm) are synthesized from Zn(O 2 CR) 2 (O 2 CR = tetra-decanoate, oleate and 2-hexyldecanoate), N,N'-disubstituted and N,N',N'-trisubstituted thioureas, and P,P,N-trisubstituted phos-phanecarbothioamides. The influence of precursor substitution, ligand sterics, and reaction temperature on the final nanocrystal size were evaluated. By using saturated hydrocarbon solvents and saturated aliphatic carboxylate ligands, polymeric byproducts could be avoided and pure ZnS nanocrystals isolated. Elevated temperatures, slower precursor conversion reactivity and branched zinc 2-hexyldecanoate yield the largest ZnS nanocrystals. Carefully purified zinc carboxylate, rapidly converting precursors, and cooling the synthesis mixture following complete precursor conversion provide quasi spherical nanocrystals with the narrowest shape dispersity. Nanocrystal sizes were measured using pair distribution function (PDF) analysis of X-ray scattering and scanning transmission electron microscopy (STEM) and plotted versus the energy of their first excitonic optical absorption. The resulting empirical relationship provides a useful method to characterize the nanocrystal size from 1.7-4.0 nm using optical absorption spectroscopy.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Ln 10 S 14 O (Ln = La, Pr, Nd, Sm) Oxysulfides: A Series of Direct n-Type Semiconductors

Lanthanoid oxysulfides are promising materials for technological applications owing to their magnetic, photoluminescent, catalytic, and optoelectronic properties. In this work, we report the solid-state synthesis and structural characterization of Ln 10 S 14 O (Ln = La, Ce, Pr, Nd, Sm) oxysulfides. Then, we present a thorough discussion on their electronic and photophysical properties. Through Tauc plot analysis and the derivation of the absorption spectrum fitting method (DASF), we determine that all oxysulfides have direct band gaps with energies of 2.84 eV (La), 2.02 eV (Ce), 2.56 eV (Pr), 2.64 eV (Nd), and 2.41 eV (Sm). Furthermore, surface photovoltage spectroscopy (SPS) shows photovoltage (ΔCPD) values of –0.4 to –1.1 V for La-, Pr-, Nd-, and Sm-containing compounds when illuminated near the optical band gap, indicating that these oxysulfides are n-type semiconductors, which is consistent with Mott–Schottky analysis. Photovoltages under sub-band gap illumination energy and photovoltage decay data suggest mid-band gap states possibly arising from the lanthanoid 4f orbitals and/or defects within the crystal structure or at the particle surfaces. These photophysical properties suggest possible applications of the oxysulfides in photoelectrochemical and photovoltaic energy conversion.

14 SOLAR ENERGY↗
DOE OSTI2022

Electronic Structure of Ru 2 6+ Complexes with Electron-Rich Anilinopyridinate Ligands

Diruthenium paddlewheel complexes supported by electron-rich anilinopyridinate (Xap) ligands were synthesized in the course of the first in-depth structural and spectroscopic interrogation of monocationic [Ru 2 (Xap) 4 Cl] + species in the Ru 2 6+ oxidation state. Despite paramagnetism of the compounds, 1 H NMR spectroscopy proved highly informative for determining the isomerism of the Ru 2 5+ and Ru 2 6+ compounds. While most compounds are found to have the polar (4,0) geometry, with all four Xap ligands in the same orientation, some synthetic procedures resulted in a mixture of (4,0) and (3,1) isomers, most notably in the case of the parent compound Ru 2 (ap) 4 Cl. The isomerism of this compound has been overlooked in previous reports. Electrochemical studies demonstrate that oxidation potentials can be tuned by the installation of electron donating groups to the ligands, increasing accessibility of the Ru 2 6+ oxidation state. The resulting Ru 2 6+ monocations were found to have the expected (π*) 2 ground state, and an in-depth study of the electronic transitions by Vis/NIR absorption and MCD spectroscopies with the aid of TD-DFT allowed for the assignment of the electronic spectra. Here, the empty δ* orbital is the major acceptor orbital for the most prominent electronic transitions. Both Ru 2 5+ and Ru 2 6+ compounds were studied by Ru K-edge X-ray absorption spectroscopy; however, the rising edge energy is insensitive to redox changes in the compounds due to the broad line shape observed for 4d transition metal K-edges. DFT calculations indicate the presence of ligand orbitals at the frontier level, suggesting that further oxidation beyond Ru 2 6+ will be ligand-centered rather than metal-centered.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Excited-State Dynamics during Primary C–I Homolysis in Acetyl Iodide Revealed by Ultrafast Core-Level Spectroscopy

In typical carbonyl-containing molecules, bond dissociation events follow initial excitation to $nπ_{C=O}$$^*$ states. However, in acetyl iodide, the iodine atom gives rise to electronic states with mixed $nπ_{C=O}$$^*$ and $nπ_{C–I}$$^*$ character, leading to complex excited-state dynamics, ultimately resulting in dissociation. Using ultrafast extreme ultraviolet (XUV) transient absorption spectroscopy and quantum chemical calculations, we present an investigation of the primary photodissociation dynamics of acetyl iodide via time-resolved spectroscopy of core-to-valence transitions of the I atom after 266 nm excitation. The probed I 4d-to-valence transitions show features that evolve on sub-100-fs time scales, reporting on excited-state wavepacket evolution during dissociation. These features subsequently evolve to yield spectral signatures corresponding to free iodine atoms in their spin–orbit ground and excited states with a branching ratio of 1.1:1 following dissociation of the C–I bond. Calculations of the valence excitation spectrum via equation-of-motion coupled cluster with single and double substitutions (EOM-CCSD) show that initial excited states are of spin-mixed character. From the initially pumped spin-mixed state, we use a combination of time-dependent density functional theory (TDDFT)-driven nonadiabatic ab initio molecular dynamics and EOM-CCSD calculations of the N$_{4,5}$ edge to reveal a sharp inflection point in the transient XUV signal that corresponds to rapid C–I homolysis. Here, by examining the molecular orbitals involved in the core-level excitations at and around this inflection point, we are able to piece together a detailed picture of C–I bond photolysis in which d → σ* transitions give way to d → p excitations as the bond dissociates. We also report theoretical predictions of short-lived, weak 4d → 5d transitions in acetyl iodide, validated by weak bleaching in the experimental transient XUV spectra. This joint experimental–theoretical effort has thus unraveled the detailed electronic structure and dynamics of a strongly spin–orbit coupled system.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

No One Size Fits All: Semiconductor Nanocrystal Sizing Curves

Although colloidal quantum dots or nanocrystals (NCs) are now long past their infancy, there remain basic issues that must be addressed to fully establish their fundamental, size-dependent properties. This is especially true for model systems such as CdSe where confinement effects are responsible for changes in their optical response and where significant effort has been invested in developing theories of their underlying electronic structure. Surprisingly, there still appears to be a lack of consensus on one of the most fundamental metrics for NCs, their sizing curves. As shown here, these are empirical functions that link the size of isotropically shaped semiconductor NCs (such as the diameter, d, for spherical NCs and edge length, l, for cube-shaped ones) to corresponding changes in optical response.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Proton Dissociation and Delocalization under Stepwise Hydration of Zeolite HZSM-5

The protonation behavior of zeolite Brønsted acid sites (BAS) in the presence of water is important for the performance of these widely used catalysts. Despite extensive study, the number of water molecules necessary for deprotonation is not well understood, in large part because experiments have been unable to access this information. In this work, we report experimental evidence for full deprotonation of the BAS in the presence of two or more water molecules, with a deprotonation energy of 1.6 kcal/mol. Linear IR absorption and 2D IR spectra were measured over a wide range of controlled hydration levels from 0.5 to 8.0 equivalents of H 2 O/Al at a constant temperature. Distinct spectral signatures of the protonated BAS and excess proton are identified, and their hydration dependence is analyzed quantitatively. Using the experiment as a benchmark, ab initio molecular dynamics simulations are reported that reproduce the experimental trends in the protonation state and IR spectra. The proton charge position and delocalization are quantified in clusters of 1–8 H 2 O molecules using the recently developed rCEC method. This analysis provides insight into the proton structure in confined water clusters, showing that the excess charge remains relatively localized between two oxygen atoms across the hydration range.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Electrolyte Reactivity on the MgV 2 O 4 Cathode Surface

Predictive understanding of the solvation-dependent reactivity and molecular interaction of electrolyte ions and solvent molecules on reactive electrodes has been a major challenge but is essential for addressing instabilities and surface passivation that occur at electrode-electrolyte interface (EEI) of multivalent Mg batteries. In this work, the isolated intrinsic reactivities of prominent chemical species present in magnesium bis(trifluoromethanesulfonimide) (Mg(TFSI) 2 ) in diglyme (G2) electrolytes, including ionic (TFSI - , [Mg(TFSI)] + , [Mg(TFSI):G2] + , [Mg(TFSI):2G2] + ) as well as neutral molecules (G2) on magnesium vanadate cathode (MgV 2 O 4 ) surface has been studied using a combination of first-principles calculations and multimodal analysis of well-defined cathode electrolyte interphase (CEI) layers. Here, our calculations show that non-solvated [Mg(TFSI)] + is the strongest adsorbing species on the MgV 2 O 4 surface compared to all other ions while fully solvated [Mg(TFSI):2G2] + are least favorable to decomposition. The cleavage of C-S bonds in TFSI - to form CF 3 - is predicted to be most desired pathway for all ionic species, which is followed by the cleavage of C-O bonds of G2 to yield CH 3 + or OCH 3 - species. The strong stabilization and electron transfer between ionic electrolyte species and MgV 2 O 4 is found to significantly favor these decomposition reactions on the surface compared to intrinsic gas phase dissociation. Experimentally, we used state-of-the-art ion soft landing to selectively deposit mass-selected TFSI - , [Mg(TFSI):G2] + and [Mg(TFSI):2G2] + on MgV 2 O 4 thin film to form well-defined electrolyte-MgV 2 O 4 interface. Analysis of soft-landed interphase using X-ray photoelectron, X-ray absorption near edge structure, electron energy-loss spectroscopies as well as transmission electron microscopy confirmed the presence of decomposition species (e.g., MgFx, carbonates) formed in the interfacial region and the higher amount of MgFx with [Mg(TFSI):G2] + , which corroborates the theoretical observation. Overall, we established the mechanistic pathway for the electrolyte-induced formation of passivating fluorides on MgV 2 O 4 cathode facilitated by the surface adsorption and charge transfer, which provided essential knowledge for rational design of stable electrolytes for multivalent cathodes.

Cathode-electrolyte interphase formation↗
DOE OSTI2023

Unlocking the Potential of A-Site Ca-Doped LaCo 0.2 Fe 0.8 O 3-δ : A Redox-Stable Cathode Material Enabling High Current Density in Direct CO 2 Electrolysis

Massive carbon dioxide (CO 2 ) emission from recent human industrialization has affected the global ecosystem and raised great concern for environmental sustainability. The solid oxide electrolysis cell (SOEC) is a promising energy conversion device capable of efficiently converting CO 2 into valuable chemicals using renewable energy sources. However, Sr-containing cathode materials face the challenge of Sr carbonation during CO 2 electrolysis, which greatly affects the energy conversion efficiency and long-term stability. Thus, A-site Ca-doped La1– x CaxCo 0.2 Fe 0.8 O 3-δ (0.2 ≤ x ≤ 0.6) oxides are developed for direct CO 2 conversion to carbon monoxide (CO) in an intermediate-temperature SOEC (IT-SOEC). With a polarization resistance as low as 0.18 O cm 2 in pure CO 2 atmosphere, a remarkable current density of 2.24 A cm –2 was achieved at 1.5 V with La 0.6 Ca 0.4 Co 0.2 Fe 0.8 O 3-δ (LCCF64) as the cathode in La 0.8 Sr 0.2 Ga 0.83 Mg 0.17 O 3-δ (LSGM) electrolyte (300 µm) supported electrolysis cells using La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3-δ (LSCF) as the air electrode at 800 °C. Furthermore, symmetrical cells with LCCF64 as the electrodes also show promising electrolysis performance of 1.78 A cm –2 at 1.5 V at 800 °C. In addition, stable cell performance has been achieved on direct CO 2 electrolysis at an applied constant current of 0.5 A cm –2 at 800 °C. The easily removable carbonate intermediate produced during direct CO 2 electrolysis makes LCCF64 a promising regenerable cathode. The outstanding electrocatalytic performance of the LCCF64 cathode is ascribed to the highly active and stable metal/perovskite interfaces that resulted from the in situ exsolved Co/CoFe nanoparticles and the additional oxygen vacancies originated from the Ca 2 Fe 2 O 5 phase synergistically providing active sites for CO 2 adsorption and electrolysis. Here this study offers a novel approach to design catalysts with high performance for direct CO 2 electrolysis.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2020

Thin-Film Solar Cells with 19% Efficiency by Thermal Evaporation of CdSe and CdTe

CdTe-based solar cells exhibiting 19% power conversion efficiency were produced using widely available thermal evaporation deposition of the absorber layers on SnO2-coated glass with or without a transparent MgZnO buffer layer. Evaporating CdSe and CdTe sequentially by thermal evaporation and subsequent CdCl2 annealing establishes efffective CdSeTe band grading as well as dense, large-grain films. These results show that high-performance II-VI photovoltaics can be made by inexpensive, commercially available evaporation systems without the need to build customized equipment, enabling CdTe photovoltaics research and manufacturing to be more accessible to the broader photovoltaics community.

14 SOLAR ENERGY↗
DOE OSTI2025

Controlled Synthesis of SnO 2 Nanocrystals with Tunable Band Gaps

Tin(IV) oxide nanocrystals (SnO 2 NCs) have significant potential in various applications, with their performance closely related to their band gap. The band gap is influenced by the size and shape of the NCs, which can be precisely controlled by adjusting reaction conditions. In this study, we present deliberately designed synthesis protocols to produce high-quality SnO 2 NCs with tunable band gaps using different methods. Key factors affecting the synthesis include control of the oxidizing agent, reaction temperature, solvent selection, and reaction time optimization. The resulting NCs were characterized by using TEM, XRD, XPS, and optical spectroscopy. Notably, SnO 2 NCs synthesized by controlling the oxidizing agent (air injection) in a hot organic solution were smaller in size and exhibited abundant oxygen vacancies. In contrast, extending the reaction time or using ethanol as a solvent in hydrothermal systems facilitated larger spherical or rod-like SnO 2 NCs with fewer oxygen vacancies. Further analysis of the band gap and valence band maximum energy revealed that the abundant vacancies in SnO 2 NCs synthesized with the air-controlled hot organic solution method resulted in a narrower band gap and an upshifted valence band. These synthetic strategies illustrate the potential for deliberately designing SnO 2 NCs with optimized electronic structures for various applications.

band gap↗
DOE OSTI2025

PAH101: A GW+BSE Dataset of 101 Polycyclic Aromatic Hydrocarbon (PAH) Molecular Crystals

Abstract The excited-state properties of molecular crystals are important for applications in organic electronic devices. TheGWapproximation and Bethe-Salpeter equation (GW+BSE) is the state-of-the-art method for calculating the excited-state properties of crystalline solids with periodic boundary conditions. We present the PAH101 dataset ofGW+BSE calculations for 101 molecular crystals of polycyclic aromatic hydrocarbons (PAHs) with up to ~500 atoms in the unit cell. To the best of our knowledge, this is the firstGW+BSE dataset for molecular crystals. The data records include theGWquasiparticle band structure, the fundamental band gap, the static dielectric constant, the first singlet exciton energy (optical gap), the first triplet exciton energy, the dielectric function, and optical absorption spectra for light polarized along the three lattice vectors. The dataset can be used to (i) discover materials with desired electronic/optical properties, (ii) identify correlations between DFT andGW+BSE quantities, and (iii) train machine learned models to help in materials discovery efforts.

Science & Technology - Other Topics↗
DOE OSTI2025

Time-resolved vacuum-ultraviolet photoelectron spectroscopy of the à 1 A u state of acetylene

Ultrafast time-resolved photoelectron spectra are reported for the vacuum-ultraviolet (VUV) photoionization of acetylene following excitation to the à 1 A u state via UV absorption at 200 nm. The excitation energy lies above the lowest dissociation threshold to C 2 H X̃ 2 Σ + + H, as well as above the threshold for adiabatic dissociation of the à 1 A u state to form C 2 H (à 2 Π) + H. The time-dependent mass spectra and photoelectron spectra provide insight into the intramolecular decay processes of the à 1 A u state. In addition, photoelectron spectra of the à 1 A u state with VUV light access both the X̃ 2 Π u and à 2 Σ g + states of the ion, as well as the predicted, but previously unobserved, 1 2 Π g state, which corresponds to a two-hole, one-particle configuration that lies in close proximity to the à 2 Σ g + state. The 1 2 Π g state is split into 2 A 2 + 2 B 2 and 2 A g + 2 B g states in the cis and trans configurations, respectively. In conclusion, electronic structure calculations, along with trajectory calculations, reproduce the principal features of the experimental data and confirm the assignment of the 1 2 Π g state.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Generating and processing optical waveforms using spectral singularities

Here, we show that a laser at threshold can be utilized to generate the class of coherent and transform-limited waveforms (vt — z) m e i(kz—ωt) at optical frequencies. We derive these properties analytically and demonstrate them in semiclassical time-domain laser simulations. We then utilize these waveforms to expand other waveforms with high modulation frequencies and demonstrate theoretically the feasibility of complex-frequency coherent absorption at optical frequencies, with efficient energy transduction and cavity loading. This approach has potential applications in quantum computing, photonic circuits, and biomedicine.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

Interfacial electronic states of misfit heterostructure between hexagonal ZnO and cubic NiO

The combination of materials with dissimilar symmetries can induce a large amount of stress at the interfacial layer of films, thereby promoting the appearance of novel properties in related devices. The study of the interfacial state is critical for determining the inner mechanism. In this work, the misfit heterostructure between cubic NiO films and wurtzite ZnO is investigated. A NiO film grown using molecular beam epitaxy on a ZnO substrate shows a highly (100)-oriented texture featuring three domains with a rotation angle of 30°, which is in agreement with first principles calculations. Misfit-induced dislocations and lattice distortions within the interfacial layers of the NiO film give rise to interfacial electronic states, which are different from those in bulk; these electronic states are analyzed by in situ synchrotron-based x-ray photoelectron spectroscopy, ultraviolet photoelectron spectroscopy, x-ray absorption spectroscopy, and ex situ electron energy loss spectroscopy. Additionally, the origin of these interfacial states is discussed. This work aims to provide insights for the integration of semiconducting hexagonal ZnO with other functional materials that have a cubic symmetry. Additionally, we investigate the integration of photon and electron-based techniques to explore the interfacial states of complex interfaces, which is an important aspect of material science.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Beyond integration: modeling every pixel to obtain better structure factors from stills

Most crystallographic data processing methods use pixel integration. In serial femtosecond crystallography (SFX), the intricate interaction between the reciprocal lattice point and the Ewald sphere is integrated out by averaging symmetrically equivalent observations recorded across a large number (10 4 -10 6 ) of exposures. Although sufficient for generating biological insights, this approach converges slowly, and using it to accurately measure anomalous differences has proved difficult. This report presents a novel approach for increasing the accuracy of structure factors obtained from SFX data. A physical model describing all observed pixels is defined to a degree of complexity such that it can decouple the various contributions to the pixel intensities. Model dependencies include lattice orientation, unit-cell dimensions, mosaic structure, incident photon spectra and structure factor amplitudes. Maximum likelihood estimation is used to optimize all model parameters. The application of prior knowledge that structure factor amplitudes are positive quantities is included in the form of a reparameterization. The method is tested using a synthesized SFX dataset of ytterbium(III) lysozyme, where each X-ray laser pulse energy is centered at 9034 eV. This energy is 100 eV above the Yb 3+ L -III absorption edge, so the anomalous difference signal is stable at 10 electrons despite the inherent energy jitter of each femtosecond X-ray laser pulse. This work demonstrates that this approach allows the determination of anomalous structure factors with very high accuracy while requiring an order-of-magnitude fewer shots than conventional integration-based methods would require to achieve similar results.

59 BASIC BIOLOGICAL SCIENCES↗