Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Electron diffraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

Study of the crystal and electronic structure of graphene films grown on 6H-SiC (0001)

The structural, chemical, and electronic properties of epitaxial graphene films grown by thermal decomposition of the Si-face of a semi-insulating 6H-SiC substrate in an argon environment are studied by Raman spectroscopy, atomic-force microscopy, the low-energy electron diffraction method, X-ray photoelectron spectroscopy, angle-resolved photoemission spectroscopy and X-ray absorption spectroscopy at the carbon K edge. It is shown that the results of a systematic integrated study make it possible to optimize the growth parameters and develop a reliable technology for the growth of high-quality single-layer graphene films with a small fraction of bilayer graphene inclusions.

36 MATERIALS SCIENCE↗

Nature of Nano-Sized Plutonium Particles in Soils at the Hanford Site

The occurrence of plutonium dioxide (PuO2) either from direct deposition or from the precipitation of plutonium-bearing solutions in contaminated soils and sediments has been well described, particularly for the Hanford site in Washington State. However, past research has suggested that plutonium may exist in environmental samples at the Hanford site in chemical forms in addition to large size PuO2 particles and that these previously unidentified nano-sized particles maybe more reactive and thus more likely to influence the environmental mobility of Pu. Here we present evidence for the formation of nano-sized plutonium iron phosphate hydroxide structurally related to the rhabdophane group nanoparticles in 216-Z9 crib sediments from Hanford using transmission electron microscopy (TEM). The distribution and nature of these nanoparticles varied depending on the adjacent phases present. Fine electron probes were used to obtain electron diffraction and electron energy-loss spectra from specific phase regions of the 216-Z9 cribs specimens from fine-grained plutonium oxide and phosphate phases. Energy-loss spectra were used to evaluate the plutonium N4,5 (4d → 5f ) and iron L2,3 absorption edges. The iron plutonium phosphate formation may depend on the local micro-environment in the sediments, availability of phosphate, and hence the distribution of these minerals may control long-term migration of Pu in the soil. This study also points to the utility of using electron beam methods for determining the identity of actinide phases and their association with other sediment phases.

Cribs, Soil Contamination↗

MICRO/NANO-STRUCTURAL EXAMINATION AND FISSION PRODUCT IDENTIFICATION IN NEUTRON IRRADIATED AGR-1 TRISO FUEL

Advanced microscopic and microanalysis techniques were developed and applied to study irradiation effects and fission product behavior in selected low-enriched uranium oxide/uranium carbide TRISO-coated particles from fuel compacts in six capsules irradiated to burnups of 11.2 to 19.6% FIMA. Although no TRISO coating failures were detected during the irradiation, the fraction of Ag-110m retained in individual particles often varied considerably within a single compact and at the capsule level. At the capsule level Ag-110m release fractions ranged from 1.2 to 38% and within a single compact, silver release from individual particles often spanned a range that extended from 100% retention to nearly 100% release. In this paper, selected irradiated particles from Baseline, Variant 1 and Variant 3 type fueled TRISO coated particles were examined using Scanning Electron Microscopy, Atom Probe Tomography; Electron Energy Loss Spectroscopy; Precession Electron Diffraction, Transmission Electron Microscopy, Scanning Transmission Electron Microscopy (STEM), High Resolution Electron Microscopy (HRTEM) examinations and Electron Probe Micro-Analyzer. Particle selection in this study allowed for comparison of the fission product distribution with Ag retention, fuel type and irradiation level. Nano sized Ag-containing features were predominantly identified in SiC grain boundaries and/or triple points in contrast with only two sitings of Ag inside a SiC grain in two different compacts (Baseline and Variant 3 fueled compacts). STEM and HRTEM analysis showed evidence of Ag and Pd co-existence in some cases and it was found that fission product precipitates can consist of multiple or single phases. STEM analysis also showed differences in precipitate compositions between Baseline and Variant 3 fuels. A higher density of fission product precipitate clusters were identified in the SiC layer in particles from the Variant 3 compact compared with the Variant 1 compact. Trend analysis shows precipitates were randomly distributed along the perimeter of the IPyC-SiC interlayer but only weakly associated with kernel protrusion and buffer fractures. There has been no evidence that the general release of silver is related to cracks or significant degradation of the microstructure. The results presented in this paper provide new insights to Ag transport mechanism(s) in intact SiC layer of TRISO coated particles.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Reflector Selection for the Indexing of Electron Backscatter Diffraction Patterns

Abstract We propose a new methodology for ranking the reflectors used in traditional Hough-based indexing of electron backscatter diffraction (EBSD) patterns. Instead of kinematic X-ray or electron structure factors ( F hkl ) currently utilized, we propose the integrated Kikuchi band intensity parameter ( β hkl ) based on integrated dynamical electron backscatter intensities. The proposed parameter is compared with the traditional kinematical intensity, $I_{hkl}^{{\rm kin}} $ , as well as the average Hough transform peak intensity, $I_{hkl}^{{\rm HSP}} $ and used to index EBSD patterns for a number of different material systems of varying unit cell complexities including nickel, silicon, rutile, and forsterite. For elemental structures, β hkl closely follows the kinematical ranking. However, significant ranking differences arise for more complex unit cells, with the β hkl parameter showing a better correlation with the integrated Hough intensities. Lastly, Hough-based indexing of a simulated forsterite data set showed an appreciable improvement in the median confidence index (0.15 to 0.35) when β hkl is used instead of $I_{hkl}^{{\rm kin}} $ for ranking the reflectors.

36 MATERIALS SCIENCE↗

Molecular beam epitaxial growth of BaTiO{sub 3} single crystal on Ge-on-Si(001) substrates

Thin films of perovskite type BaTiO{sub 3} (BTO) oxide have been grown epitaxially directly on Ge(001) surface at high temperature using molecular beam epitaxy. A stable (2x1) BaGe{sub x} surface periodicity is the critical enabling template for subsequent BTO heteroepitaxy on Ge(001). Reflection high energy electron diffraction (RHEED) and transmission electron microscopy indicate that high quality heteroepitaxy on Ge-on-Si(001) take place with <100>BTO(001)||<110>Ge(001) confirming a 45 deg. rotation epitaxial relationship. X-ray diffraction has been used to study the BTO lattice parameters and we evidenced that both tetragonal and cubic phases of BTO are present in the epilayer.

36 MATERIALS SCIENCE↗

Mapping 180° polar domains using electron backscatter diffraction and dynamical scattering simulations

A novel technique, which directly and nondestructively maps polar domains using electron backscatter diffraction (EBSD) is described and demonstrated. Through dynamical diffraction simulations and quantitative comparison to experimental EBSD patterns, the absolute orientation of a non-centrosymmetric crystal can be determined. With this information, the polar domains of a material can be mapped. The technique is demonstrated by mapping the non-ferroelastic, or 180°, ferroelectric domains in periodically poled LiNbO 3 single crystals. Furthermore, the authors demonstrate the possibility of mapping polarity using this technique in other polar materials system.

36 MATERIALS SCIENCE↗

A molecular dynamics study of laser-excited gold

The structural evolution of laser-excited systems of gold has previously been measured through ultrafast MeV electron diffraction. However, there has been a long-standing inability of atomistic simulations to provide a consistent picture of the melting process, leading to large discrepancies between the predicted threshold energy density for complete melting, as well as the transition between heterogeneous and homogeneous melting. We make use of two-temperature classical molecular dynamics simulations utilizing three highly successful interatomic potentials and reproduce electron diffraction data presented by Mo et al. [Science 360, 1451–1455 (2018)]. We recreate the experimental electron diffraction data, employing both a constant and temperature-dependent electron–ion equilibration rate. In all cases, we are able to match time-resolved electron diffraction data, and find consistency between atomistic simulations and experiments, only by allowing laser energy to be transported away from the interaction region. This additional energy-loss pathway, which scales strongly with laser fluence, we attribute to hot electrons leaving the target on a timescale commensurate with melting.

36 MATERIALS SCIENCE↗

Pseudo-Polymorphism in Layered FeS Intercalates: A Competition between Charged and Neutral Guest Species

Systematic synthesis studies of the formation of tetrahedral FeS-ethylenediamine intercalates resulted in the synthesis of a new compound, [Fe 9.4(2) S 10 ][Fe(en) 3 ] 0.6(1) ·en 0.9 ( 3 ). The composition and complex crystal structure were determined based on a synergistic combination of elemental composition, decomposition behavior, high-resolution synchrotron X-ray diffraction and total scattering, 57 Fe Mössbauer spectroscopy, and electron diffraction. The structural model was derived based on a systematic comparison to the previously reported structures [Fe 8 S 10 ][Fe(en) 3 ] 1 ·en 0.5 and tetragonal FeS. The new compound has flat Fe 9.4 S 10 layers, analogous to those in superconducting binary FeS. In the crystal structure of [Fe 9.4 S 10 ][Fe(en) 3 ] 0.6 ·en 0.9 , the interlayer space is occupied by [Fe(en) 3 ] 2+ complexes and neutral ethylenediamine molecules in a ~2:3 ratio. Interlayer species are not randomly oriented but ordered as evidenced by superstructural diffraction peaks in both high-resolution X-ray diffraction and electron diffraction patterns. Magnetic studies reveal no superconducting transition down to 2 K, indicating that the presence of minute amounts (~6%) of iron vacancies at the Fe-S layer in [Fe 9.4 S 10 ][Fe(en) 3 ] 0.6 ·en 0.9 is still sufficient to shift the position of the Fermi level resulting in an adjustment of the properties. Here, our work shows the importance of detailed characterization of the crystal structure of intercalated compounds to understand the origin of the observed properties and develop proper structure–property relationships.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Simultaneous investigation of ultrafast structural dynamics and transient electric field by sub-picosecond electron pulses

The ultrafast structure dynamics and surface transient electric field, which are concurrently induced by laser excited electrons of an aluminum nanofilm, have been investigated simultaneously by the same transmission electron diffraction patterns. These two processes are found to be significantly different and distinguishable by tracing the time dependent changes of electron diffraction and deflection angles, respectively. This study also provides a practical means to evaluate simultaneously the effect of transient electric field during the study of structural dynamics under low pump fluence by transmission ultrafast electron diffraction.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Microwave-assisted preparation of Ca{sub 6}Si{sub 6}O{sub 17}(OH){sub 2} and {beta}-CaSiO{sub 3} nanobelts

Xonotlite (Ca{sub 6}Si{sub 6}O{sub 17}(OH){sub 2}) nanobelts were synthesized by a microwave-assisted hydrothermal method at 180 {sup o}C for 90 min independent of the feeding molar ratio of Ca(NO{sub 3}){sub 2}.4H{sub 2}O to Na{sub 2}SiO{sub 3}.9H{sub 2}O in the range of 0.8-3.0. Crystalline wollastonite ({beta}-CaSiO{sub 3}) nanobelts were obtained by microwave thermal transformation of Ca{sub 6}Si{sub 6}O{sub 17}(OH){sub 2} nanobelts at 800 {sup o}C for 2 h. Ca{sub 6}Si{sub 6}O{sub 17}(OH){sub 2} nanobelts were used as both the precursor and the template for the preparation of {beta}-CaSiO{sub 3} nanobelts. The morphology and size of Ca{sub 6}Si{sub 6}O{sub 17}(OH){sub 2} nanobelts could be well preserved during the microwave thermal transformation process. The products were characterized by X-ray powder diffraction (XRD), transmission electron microscopy (TEM) and selected area electron diffraction (SAED).

36 MATERIALS SCIENCE↗

In situ surface/interface x-ray diffractometer for oxide molecular beam epitaxy

In situ studies of oxide molecular beam epitaxy by synchrotron x-ray scattering has been made possible by upgrading an existing UHV/molecular beam epitaxy (MBE) six-circle diffractometer system. For oxide MBE growth, pure ozone delivery to the chamber has been made available, and several new deposition sources have been made available on a new 12 in. CF (ConFlat, a registered trademark of Varian, Inc.) flange. X-ray diffraction has been used as a major probe for film growth and structures for the system. In the original design, electron diffraction was intended for the secondary diagnostics available without the necessity of the x-ray and located at separate positions. Deposition of films was made possible at the two diagnostic positions. And, the aiming of the evaporation sources is fixed to the point between two locations. Ozone can be supplied through two separate nozzles for each location. Also two separate thickness monitors are installed. Additional features of the equipment are also presented together with the data taken during typical oxide film growth to illustrate the depth of information available via in situ x-ray techniques.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

The manifestation of oxygen contamination in ErD2.

Erbium dihydride Er(H,D,T){sub 2} is a fluorite structure rare-earth dihydride useful for the storage of hydrogen isotopes in the solid state. However, thermodynamic predictions indicate that erbium oxide formation will proceed readily during processing, which may detrimentally contaminate Er(H,D,T){sub 2} films. In this work, transmission electron microscopy (TEM) techniques including energy-dispersive x-ray spectroscopy, energy-filtered TEM, selected area electron diffraction, and high-resolution TEM are used to examine the manifestation of oxygen contamination in ErD{sub 2} thin films. An oxide layer {approx}30-130 nm thick was found on top of the underlying ErD{sub 2} film, and showed a cube-on-cube epitaxial orientation to the underlying ErD{sub 2}. Electron diffraction confirmed the oxide layer to be Er{sub 2}O{sub 3}. While the majority of the film was observed to have the expected fluorite structure for ErD{sub 2}, secondary diffraction spots suggested the possibility of either nanoscale oxide inclusions or hydrogen ordering. In situ heating experiments combined with electron diffraction ruled out the possibility of hydrogen ordering, so epitaxial oxide nanoinclusions within the ErD{sub 2} matrix are hypothesized. TEM techniques were applied to examine this oxide nanoinclusion hypothesis.

08 HYDROGEN↗

Characterization of microtexture of 316L stainless steel fiber after multi-pass drawing by electron backscatter diffraction

Highlights: • Three crystalline phases, γ, α′, and σ, in 316L stainless steel fibers are observed by XRD. • Strain-induced martensite and two types of twin boundaries are formed in drawn fibers. • The twin boundary generation is nucleate at high angle grain boundaries and then bulge into the {112}<111> grain. • A route of the formation mechanism of deformation twins was analyzed by EBSD. - Abstract: The microstructure and microtexture of 316L stainless steel fibers (SSFs) after multi-pass cold drawing with intermediate heat treatment were investigated in this study. The crystalline phases of SSFs were identified and quantified using X-ray diffraction (XRD) analysis. Grain orientation and boundary characterization in the mantle and core regions of drawing direction (DD) were analyzed through electron backscatter diffraction (EBSD). The coincident site lattice approach provides beneficial information for defining twin boundary and analyzing the orientation relationship between neighboring grains on the Σ3 segment. Three crystalline phases, γ, α, and σ, could be seen in XRD profiles. The formation mechanism of deformation twins was found, and two types of twin boundaries were observed in the drawn fibers by EBSD. The twin boundary generated between a {112}<111> grain and a <100>//DD grain is believed to nucleate at a high-angle grain boundary and then bulge into the copper grain.

36 MATERIALS SCIENCE↗

In situ Preparation of HNbMoO{sub 6}/C Nanocomposite for Sensitive Detection of Clenbuterol

In this paper, we synthesized HNbMoO{sub 6}/C composite through the calcination of octylamine-intercalated HNbMoO{sub 6} precursor. The resulting HNbMoO{sub 6}/C composite showed some new phases of MoO{sub 2}, MoO{sub 3}, NbO{sub 2}, Nb{sub 2}O{sub 5}, and carbon, which was fully confirmed via powder X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), selected area electron diffraction (SAED), and X-ray photoelectron spectroscopy (XPS) technologies. Besides, the HNbMoO{sub 6}/C hybrid was coated on glass carbon electrode to construct an electrochemical sensor for sensitive determination of clenbuterol. The electrochemical behaviors of clenbuterol on the prepared electrode were tested by cyclic voltammetry (CV) and differential pulse voltammetry (DPV) analysis. The results showed that the intercalated carbon can act as active sites to accelerate electron transfer. In addition, more exposed surface areas of the HNbMoO{sub 6}/C composite will facilitate the electrolyte to permeate. The oxidation peak current of clenbuterol was linearly related to its concentration in the range of 1.04 × 10{sup −5} to 7.51 × 10{sup −4} mol L{sup −1}, and the determination limit was calculated to be 3.03 × 10{sup −6} mol L{sup −1} (S/N = 3). This sensor exhibits excellent stability, reproducibility, specificity, and good recoveries when applied to monitor clenbuterol in real samples.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The local structure and composition of Ba{sub 4}Nb{sub 2}O{sub 9}-based oxycarbonates

X-ray powder-diffraction (XRD), high-resolution transmission electron microscopy (HRTEM), electron diffraction (ED), infrared spectroscopy (IR), thermogravimetry (TG) and mass spectroscopy (MS) were performed to investigate the composition and the crystal structure of tetra-barium di-niobate (V) Ba{sub 4}Nb{sub 2}O{sub 9}. The TG, MS and IR studies revealed that the compound is a hydrated oxycarbonate. Assuming that the carbonate stoichiometrically replaces oxygen, the composition of the low-temperature {alpha}-modification, obtained by slow cooling from 1100 {sup o}C, corresponds to Ba{sub 4}Nb{sub 2}O{sub 8.8}(CO{sub 3}){sub 0.2}.0.1H{sub 2}O, while the quenched high-temperature {gamma}-modification has the Ba{sub 4}Nb{sub 2}O{sub 8.42}(CO{sub 3}){sub 0.58}.0.38H{sub 2}O composition. The {alpha}-phase has a composite incommensurately modulated structure consisting of two mutually interacting [Ba]{sub {infinity}} and the [(Nb,{open_square})O{sub 3}]{sub {infinity}} subsystems. The composite modulated crystal structure of the {alpha}-phase can be described with the lattice parameters a=10.2688(1) A, c=2.82426(8) A, q=0.66774(2)c* and a superspace group R3{sup -bar }m(00{gamma})0s. The HRTEM analysis demonstrates the nanoscale twinning of the trigonal domains parallel to the {l_brace}1 0 0{r_brace} crystallographic planes. The twinning introduces a one-dimensional disorder into the [(Nb,{open_square})O{sub 3}]{sub {infinity}} subsystem, which results in an average P6{sup -bar }2c crystal structure of the {alpha}-phase. Possible places for the carbonate group in the structure are discussed using a comparison with other hexagonal perovskite-based oxycarbonates. - Graphical abstract: The composition and the local crystal structure of generally known {alpha}-Ba{sub 4}Nb{sub 2}O{sub 9} was studied. The compound is hydrated oxycarbonate with the composition of Ba{sub 4}Nb{sub 2}O{sub 8.8}(CO{sub 3}){sub 0.2}.0.1 H{sub 2}O. It has a composite incommensurately modulated structure consisting of two mutually interacting subsystems, i.e., [Ba]{infinity} and the [(Nb,)O{sub 3}]{infinity} subsystem.

36 MATERIALS SCIENCE↗

Application of Electron Backscatter Diffraction to Phase Identification

The identification of crystalline phases in solids requires knowledge of two microstructural properties: crystallographic structure and chemical composition. Traditionally, this has been accomplished using X-ray diffraction techniques where the measured crystallographic information, in combination with separate chemical composition measurements for specimens of unknown pedigrees, is used to deduce the unknown phases. With the latest microstructural analysis tools for scanning electron microscopes, both the crystallography and composition can be determined in a single analysis utilizing electron backscatter diffraction and energy dispersive spectroscopy, respectively. In this chapter, we discuss the approach required to perform these experiments, elucidate the benefits and limitations of this technique, and detail via case studies how composition, crystallography, and diffraction contrast can be used as phase discriminators.

36 MATERIALS SCIENCE↗

Investigation of chemical composition and crystal structure in sintered Ce{sub 15}Nd{sub 15}Fe{sub bal}B{sub 1} magnet

The substitution of cerium, a more abundant rare-earth element, for sintered Nd-Fe-B magnets has drawn intense interest. In the present work, nominal composition of Ce{sub 15}Nd{sub 15}Fe{sub bal}B{sub 1} (wt. %), with cerium constitutes increased to 50% of the total rare-earth content, was used. And Ce-free Nd{sub 30}Fe{sub bal}B{sub 1} (wt. %) was prepared by the same preparation process as comparison. The microstructure of the sintered magnets has been investigated by means of X-ray diffraction and transmission electron microscope. The results show that there are three kinds of RE-rich phases in the same magnet, i.e., fcc-(Ce,Nd)O{sub x} (a=0.547nm), hcp-(Ce,Nd){sub 2}O{sub 3} (a=0.386nm, c=0.604nm) and bcc-(Ce,Nd){sub 2}O{sub 3} (a=1.113nm). Ors of (140)(Ce,Nd){sub 2}Fe{sub 14}B// (1-21)bcc-(Ce,Nd){sub 2}O{sub 3}(∼3°), [001](Ce,Nd){sub 2}Fe{sub 14}B// [-214]bcc-(Ce,Nd){sub 2}O{sub 3}; (01-1)(Ce,Nd){sub 2}Fe{sub 14}B// (101)fcc- (Ce,Nd)O{sub x}(∼2°), [101](Ce,Nd){sub 2}Fe14B// [12-1]fcc-(Ce,Nd)O{sub x} were found through selected area electron diffraction (SAED) analysis. According to the analysis, it can be concluded that cerium has partly substituted for neodymium by occupying the corresponding atom sites in the Ce{sub 15}Nd{sub 15}Fe{sub bal}B{sub 1} magnet, without changing the crystal configuration.

36 MATERIALS SCIENCE↗

Characterization of Thin Films and Coatings

Just as the numbers and types of thin films have grown dramatically, the needs and approaches for their characterization have also expanded significantly. Adequate characterization of a film or coating depends on the process to create the coating as well as the planned or potential application(s) and expected lifetime. Characterization of a coating or film necessarily requires application of methods that determine properties of the coating and not primarily the substrate. This places some focus on methods that determine properties of layers and not "bulk" material. However, the increasing importance of micro- and nano-structures in coatings and films places an increased importance in methods with high spatial resolution. The growing use of organic films and coatings and the importance of molecular functionalization of inorganic surfaces increase the importance for different types of molecular characterization tools. In most circumstances appropriate characterization requires use of a combination of tools. The purpose of this chapter is to provide an introduction to the basic methods and overview applications for some of the most important tools for characterization of films, coatings and surfaces. The chapter will be organized in six sections: • Technique Overview – This section provides a high level summary of the types of information that can be obtained by different methods and includes information about their sensitivity and resolution. • Incident Photon Methods – Techniques involving incident photons are described and some brief examples of application are shown. Methods included are: x-ray photoelectron spectroscopy (XPS), x-ray diffraction (XRD), x-ray reflectivity (XRR), Fourier transform infra-red spectroscopy (FTIR), laser Raman spectroscopy, ellipsometry, and photoluminescence spectroscopy. • Incident Ion Methods - Methods initiated by ion irradiation are summarized including: Rutherford backscattering spectrometry (RBS), nuclear reaction analysis (NRA), ion channeling, elastic recoil detection analysis (ERDA), secondary ion mass spectrometry (SIMS), glow discharge mass spectrometry and uses of focused ion beams (FIB) (often in combination with scanning electron microscopy). • Incident Electron Methods – Methods involving incident electrons include: Auger electron spectroscopy (AES), scanning electron microscopy (SEM), energy dispersive x-ray analysis (EDS), transmission electron microscopy (TEM), and electron diffraction (low energy electron diffraction [LEED] and reflection high energy electron diffraction [RHEED]). • Other Methods – Additional methods described include scanning probe microscopy (SPM) (including scanning tunneling microscopy [STM] and atomic force microscopy [AFM]) and atom probe microscopy.

36 MATERIALS SCIENCE↗