Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Effectiveness”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

Effects of wall electrodes on Hall effect thruster plasma

This paper investigates the physical mechanisms that cause beneficial and detrimental performance effect observed to date in Hall effect thrusters with wall electrodes. It is determined that the wall electrode sheath can reduce ion losses to the wall if positioned near the anode (outside the dense region of the plasma) such that an ion-repelling sheath is able to form. The ability of the wall electrode to form an ion-repelling sheath is inversely proportional to the current drawn—if the wall electrode becomes the dominant sink for the thruster discharge current, increases in wall electrode bias result in increased local plasma potential rather than an ion-repelling sheath. A single-fluid electron flow model gives results that mimic the observed potential structures and the current-sharing fractions between the anode and wall electrodes, showing that potential gradients in the presheath and bulk plasma come at the expense of current draw to the wall electrodes. Secondary electron emission from the wall electrodes (or lack thereof) is inferred to have a larger effect if the electrodes are positioned near the exit plane than if positioned near the anode, due to the difference in energy deposition from the plasma.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Effects of large laser bandwidth on stimulated Raman scattering instability in underdense plasma

The effects of laser bandwidth on stimulated Raman scattering (SRS) instability in underdense plasma are studied by particle-in-cell simulations. In the simulations, sinusoidal frequency modulation of the incident laser pulse is used. By changing the size of bandwidth, it is shown that the linear growth of SRS can be suppressed considerably, provided the laser bandwidth is much larger than the SRS linear growth rate. Simulations also show that by choosing the proper frequency modulation parameters or decreasing the linear growth rate of SRS, the inhibitory effects become more obvious. The plasma electron temperature tends to weaken the bandwidth effects especially when it is over a keV level. The laser bandwidth can only increase the time duration for linear growth but cannot diminish the instability completely.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Ion fluxes and memory effects in an Ar–O 2 modulated radiofrequency-driven atmospheric pressure plasma jet

In this work we used molecular beam mass spectrometry to characterize ion fluxes produced by a modulated radiofrequency (RF)-driven atmospheric pressure plasma jet operating in a homogeneous gas environment (Ar + 1% O 2 ). The influence of the RF modulation frequency (100 Hz to 20 kHz) on the ion fluxes was investigated by time-resolved measurements, and the lifetimes of the dominant ions, O 2 + , NO + , O − , O 2 − and O 3 − , were found to be 28 ± 2, 117 ± 8, 7.3 ± 0.4, 17 ± 1 and 23 ± 2 μs, respectively. The absolute ion densities in the near afterglow region were found to be of the order of 1011 cm−3. Significant differences in the dynamics of the positive and negative ions were found; these are explained by the presence of electrons at similar densities in the afterglow produced by electron detachment reactions from negative ions due to the large concentrations of atomic oxygen and singlet delta oxygen. Transitions in ion flux dynamics for different modulation frequencies and at the startup of the plasma were analyzed together with intensified charge coupled device images recording the plasma propagation in order to assess the dynamics of plasma plume propagation and how it is impacted by ‘memory effects’. Quantitative measurements of the ion densities enabling these memory effects are reported. The results in this paper highlight the tremendous impact of memory effects on plasma propagation and the corresponding pre-ionization.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Compositional patterning in irradiated alloys: Effective potentials and effective interfacial energy

Compositional patterning (CP) in binary alloys during energetic particle irradiation is studied using a kinetic model that considers two competing kinetic processes, a thermally activated one promoting macroscopic phase separation (MPS) of the concentration field c(r,t) and a forced one resulting in finite-range random atomic mixing. The forced mixing is modeled by a Gaussian relocation distribution with a characteristic distance R. A series of approximate kinetic models are introduced by expanding the mixing function into a series of n terms, thus replacing the non-local evaluations of the concentration field c(r'-r,t) by local derivatives of c(r,t). This approach makes it possible to obtain exact effective potentials and build steady-state diagrams for each order-n model. Phase field (PF) simulations using these order-n models reveal that near the onset of patterning, phase evolution is accurately described using an order-3 model, which changes smoothly from an extended Cahn-Hilliard free energy in the MPS regime to a one-mode Swift-Hohenberg functional in the CP regime. Deeper into the patterning regime, higher-order models are required to achieve convergence, yielding square-like concentration profiles characteristic of a strong segregation regime. These higher-order effective free energies are analogous to multimodal Swift-Hohenberg functionals. Here, a new definition for the effective interfacial energy is proposed in the CP regime, since the interfacial area is no longer an excess quantity in that regime, precluding the use of the standard thermodynamic definition of interfacial energy.

36 MATERIALS SCIENCE↗

Anomalous Hall effect in granular ferromagnetic metals and effects of weak localization.

We theoretically investigate the anomalous Hall effect in a system of dense-packed ferromagnetic grains in the metallic regime. Using the formalism recently developed for the conventional Hall effect in granular metals, we calculate the residual anomalous Hall conductivity {sigma}{sub xy} and resistivity {rho}{sub xy} and weak localization corrections to them for both skew-scattering and side-jump mechanisms. We find that the scaling relation between {rho}{sub xy} and the longitudinal resistivity {rho}{sub xx} of the array does not hold, regardless of whether it is satisfied for the specific resistivities of the grain material or not. The weak localization corrections, however, are found to be in agreement with those for homogeneous metals. We discuss recent experimental data on the anomalous Hall effect in polycrystalline iron films in view of the obtained results.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of high-{kappa} gate dielectrics on charge transport in graphene-based field effect transistors

The effect of various dielectrics on charge mobility in single-layer graphene is investigated. By calculating the remote optical phonon scattering arising from the polar substrates, and combining it with their effect on Coulombic impurity scattering, a comprehensive picture of the effect of dielectrics on charge transport in graphene emerges. It is found that though high-{kappa} dielectrics can strongly reduce Coulombic scattering by dielectric screening, scattering from surface phonon modes arising from them wash out this advantage. Calculation shows that within the available choice of dielectrics, there is not much room for improving carrier mobility in actual devices at room temperatures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural changes caused by radiation-induced reduction and radiolysis: the effect of X-ray absorbed dose in a fungal multicopper oxidase

Radiation-induced reduction, radiolysis of copper sites and the effect of pH value together with the concomitant geometrical distortions of the active centres were analysed in several fungal (C. gallica) laccase structures collected at cryotemperature. This study emphasizes the importance of careful interpretation when the crystallographic structure of a metalloprotein is described. X-ray radiation induces two main effects at metal centres contained in protein crystals: radiation-induced reduction and radiolysis and a resulting decrease in metal occupancy. In blue multicopper oxidases (BMCOs), the geometry of the active centres and the metal-to-ligand distances change depending on the oxidation states of the Cu atoms, suggesting that these alterations are catalytically relevant to the binding, activation and reduction of O{sub 2}. In this work, the X-ray-determined three-dimensional structure of laccase from the basidiomycete Coriolopsis gallica (Cg L), a high catalytic potential BMCO, is described. By combining spectroscopic techniques (UV–Vis, EPR and XAS) and X-ray crystallography, structural changes at and around the active copper centres were related to pH and absorbed X-ray dose (energy deposited per unit mass). Depletion of two of the four active Cu atoms as well as low occupancies of the remaining Cu atoms, together with different conformations of the metal centres, were observed at both acidic pH and high absorbed dose, correlating with more reduced states of the active coppers. These observations provide additional evidence to support the role of flexibility of copper sites during O{sub 2} reduction. This study supports previous observations indicating that interpretations regarding redox state and metal coordination need to take radiation effects explicitly into account.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Numerical Evaluation of Effective Thermal Conductivity of PCM with Metal Foam Incorporating Buoyancy Effects for Thermal Energy Storage

The thermal energy storage (TES) system has the capability to efficiently preserve thermal energy directly derived from the energy source, minimizing any conversion losses. Especially latent heat storage offers distinct advantages, including a substantial increase in energy storage density and minimization of temperature fluctuations within the plants. However, the phase change material (PCM) employed in latent heat storage has low thermal conductivity. Consequently, various studies are being conducted to enhance heat transfer. One approach to enhance heat transfer involves utilizing metal foam to maximize the heat transfer area. However, modeling metal foam with its intricate structure is a challenging task in numerical analysis. For this reason, ongoing research focuses on simplifying the modeling of metal foam. Nevertheless, fully encompassing all the characteristics of actual metal foam proves to be a challenging task for the simplified analytical model. The objective of this paper is to interpret the simple lattice metal foam analysis model from the perspective of behavior induced by buoyancy. When comparing the analysis results of solid PCM and liquid PCM with the same thermal conductivity under changes in porosity and gravity direction, we conducted an analysis to discern the trends in effective thermal conductivity that are overestimated due to convection. In the analysis, a constant heat flux of 10 kW and a constant surface boundary condition of 350 K were applied, and a sensitivity study regarding the mesh was conducted. The results indicate that, from the perspective of gravity in the simple lattice model, the solid analysis yields an effective thermal conductivity 29-47% higher compared to the liquid analysis. Additionally, as porosity increases, there is an observed increase of 24-33% in effective thermal conductivity.

25 ENERGY STORAGE↗

Comparing the anomalous Hall effect and the magneto-optical Kerr effect through antiferromagnetic phase transitions in Mn 3 Sn

In the non-collinear antiferromagnet Mn 3 Sn, we compare simultaneous measurements of the anomalous Hall effect (AHE) and the magneto-optical Kerr effect (MOKE) through two magnetic phase transitions: the high-temperature paramagnetic/antiferromagnetic (AF) phase transition at the Néel temperature ( T N ≈ 420 K) and a lower-temperature incommensurate magnetic ordering at T 1 ≈ 270 K. While both the AHE and MOKE are sensitive to the same underlying symmetries of the AF non-collinear spin order, we find that the transition temperatures measured by these two techniques unexpectedly differ by approximately 10 K. Moreover, the applied magnetic field at which the AF order reverses is significantly larger when measured by MOKE than when measured by AHE. Furthermore these results point to a difference between the bulk and surface magnetic properties of Mn 3 Sn.

36 MATERIALS SCIENCE↗

Radiation Effects of n-type, Low Resistivity, Spiral Silicon Drift Detector Hybrid Systems

We have developed a new thin-window, n-type, low-resistivity, spiral silicon drift detector (SDD) array - to be used as an extraterrestrial X-ray spectrometer (in varying environments) for NASA. To achieve low-energy response, a thin SDD entrance window was produced using a previously developed method. These thin-window devices were also produced on lower resistivity, thinner, n-type, silicon material, effectively ensuring their radiation hardness in anticipation of operation in potentially harsh radiation environments (such as found around the Jupiter system). Using the Indiana University Cyclotron Facility beam line RERS1, we irradiated a set of suitable diodes up to 5 Mrad and the latest iteration of our ASICs up to 12 Mrad. Then we irradiated two hybrid detectors consisting of newly, such-produced in-house (BNL) SDD chips bonded with ASICs with doses of 0.25 Mrad and 1 Mrad. Also we irradiated another hybrid detector consisting of previously produced (by KETEK) on n-type, high-resistivity SDD chip bonded with BNL's ASICs with a dose of 1 Mrad. The measurement results of radiated diodes (up to 5 Mrad), ASICs (up to 12 Mrad) and hybrid detectors (up to 1 Mrad) are presented here.

43 PARTICLE ACCELERATORS↗

Climatic effects of irrigation over the Huang-Huai-Hai Plain in China simulated by the weather research and forecasting model: Simulated Irrigation Effects in China

In this study, we apply the Weather Research and Forecasting model coupled with an operational-like irrigation scheme to investigate the climatic effects of irrigation over the Huang-Huai-Hai plain (3HP) in China. Multiple numerical experiments with irrigation off/on during spring, summer and both spring and summer are conducted, respectively. Our results show that the warm bias in surface temperature and dry bias in soil moisture are reduced over the 3HP region during growing seasons when irrigation is turned on in the model. Air temperature during non-growing seasons is also affected by irrigation due to the persistent effects of soil moisture on land-air energy exchanges and ground heat storage. Irrigation can induce a cooler planetary boundary layer (PBL) during growing seasons, causing a wetter PBL with more low-level clouds during spring but relatively dryer PBL in summer. Further analyses indicate that the dryer summer is highly related to the changes in the East Asian summer monsoon (EASM) circulation that is modified by irrigation effect. Spring irrigation may induce a decreased land-ocean thermal contrast, leading to a possible weaker EASM. Summer irrigation, however, evidently cools the atmosphere column and forces a southward shift of the upper-level jet, which results in more precipitation in Yangtze River basin but less over southern and northern China during summer.

3HP↗