Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “EXTRUSION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

Mechanical and degradation property improvement in a biocompatible Mg-Ca-Sr alloy by thermomechanical processing

Magnesium-based alloys have attracted interest as a potential material to comprise biomedical implants that are simultaneously high-strength and temporary, able to provide stabilization before degrading safely and able to be excreted by the human body. Many alloy systems have been evaluated, but this work reports on improved properties through hot extrusion of one promising alloy: Mg-1.0 wt% Ca-0.5 wt%Sr. This alloy has previously demonstrated promising toxicity and degradation properties in the as-cast and rolled conditions. In the current study extrusion causes a dramatic improvement in the mechanical properties in tension and compression, as well as a low in vitro degradation rate. Microstructure (texture, second phase distribution, and grain size), bulk mechanical properties, flow behavior, degradation in simulated body fluid, and effect on osteoblast cyctotoxicity are evaluated and correlated to extrusion temperature. In conclusion, maximum yield strength of 300 MPa (above that of annealed 316 stainless steel) with 10% elongation is observed, making this alloy competitive with existing implant materials.

36 MATERIALS SCIENCE↗

Unexpected formation by pulsed laser deposition of nanostructured Fe/olivine thin films on MgO substrates

Olivine-type LiFePO{sub 4} thin films were grown on MgO (1 0 0) substrates by pulsed laser deposition (PLD). The formation of an original nanostructure is evidenced by transmission electron microscopy measurements. Indeed, on focused ion beam prepared cross sections of the thin film, we observe, the amazing formation of metallic iron/olivine nanostructures. The appearance of such a structure is explained owing to a topotactic relation between the two phases as well as a strong Mg diffusion from the substrate to the film surface. Magnesium migration is thus concomitant with the creation of metallic iron domains that grow from the core of the film to the surface leading to large protuberances. To the best of our knowledge, this is the first report on iron extrusion from the olivine-type LiFePO{sub 4}. -- Graphical Abstract: HRTEM image of olivine/Fe nanostructure obtained by PLD. Display Omitted Research highlights: {yields} This manuscript describes the attempt to prepare textured LiFePO{sub 4} by PLD. This is presently a challenge to better understand the physical properties of the material, used as cathode in lithium ion batteries. {yields} We describe for the first time the iron extrusion from this material. Indeed, there were recent reports on the possible non-stoichiometry, i.e. lithium or oxygen. However, on the iron side, only some defect were observed for hydrothermally prepared material but the extrusion is new in this paper. {yields} We prepared interesting nanostructures which could be used for different fundamental studies: electric and magnetic measurements.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Microstructures in the 6060 aluminium alloy after various severe plastic deformation treatments

This paper presents the results concerning the microstructural refinement of the industrial 6060 aluminium alloy processed by severe plastic deformation (SPD). The high level of plastic deformation was achieved using the three methods: hydrostatic extrusion (HE), equal channel angular extrusion (ECAE) and extrusion torsion (ET), which differed in the dynamics of the loading, intensity and homogeneity of the plastic strain field. Microstructure analyses were performed before and after SPD deformation using a transmission (TEM) and a scanning electron microscope (SEM). The refined microstructures were examined qualitatively and quantitatively by the stereological methods and computer image analyses. The microstructure of the industrial 6060 aluminium alloy after deformation was characterized by an average grain size of about 0.4 {mu}m. The results show that the precipitates strongly affect the degree of refinement and the mechanism of microstructural transformations. During the SPD, the second phase particles break apart and homogenize. The HE method generates the largest increase of the volume fraction of the small primary particles. Moreover, the HE process is most effective in reducing the primary particle size. During HE and ECAE processes the second phase precipitates dissolve partially and change their shape. - Research Highlights: {yields} SPD results in a significant increase in the density of the small primary particles. {yields} SPD homogenizes the particle size distribution. {yields} HE and ECAE processes bring nano-grains in the vicinity of the primary particles. {yields} HE and ECAE processing results in the {beta}' precipitates partial dissolutions. {yields} During HE and ECAE processes the {beta}' particles change their shape.

36 MATERIALS SCIENCE↗

Microstructural changes in an extruded Mg−Zn−Y alloy reinforced by quasicrystalline I-phase by small additions of calcium, manganese and cerium-rich mischmetal

The effects of calcium, manganese and cerium-rich mischmetal additions on the microstructure and texture of the extruded Mg−6Zn−1Y (wt.%) alloy have been investigated. The microstructure of the alloys consisted of a magnesium matrix embedding second phase particles aligned along the extrusion direction. The nature and volume fraction of the second phases depended on the alloying element. Thus, Ce-rich mischmetal promoted the formation of T-phase while calcium additions resulted in the formation of a ternary Mg−Zn−Ca compound. Only, manganese additions did not affect the existence of the I-phase present in the ternary alloy. The texture was measured and it was found that calcium addition has a significant effect weakening the extrusion texture. - Highlights: •In-situ HEXRD and DSC techniques are employed to identify phase transformations. •The existence of I-phase is not altered by manganese addition to Mg93Zn6Y1 (wt.%). •Calcium addition promotes Mg{sub 6}Zn{sub 3}Ca{sub 2} formation instead of I-phase. •Mischmetal addition induces the formation of coarse T-phase particles. •Texture depends on the nature of second phases and therefore of the extrusion pressure.

36 MATERIALS SCIENCE↗

Microstructure and mechanical properties of extruded Mg-Gd-Y-Zn-Zr alloys filled with intragranular LPSO phases

Highlights: • Intragranular thin-platelet LPSO phases strongly restrict the DRX. • The low extrusion ratio fails to widely break the intragranular LPSO. • The large extrusion ratio results in the full DRX via the CDRX mechanism. • Finer DRX-ed grains and LPSO induce the higher yield strength and elongation. • The larger grain size causes an increase in the strain hardening rate. - Abstract: A comparison has been made on the dynamic recrystallization (DRX), texture, and mechanical properties of the Mg-5.5Gd-4.4Y-1.1Zn-0.5Zr (wt%) alloys extruded with different ratios (ER, 36 and 7.1). Intragranular long-period stacking ordered (LPSO) phases strongly restrict the DRX by restraining the lattice rotation of α-Mg grains and hindering the migration of the boundaries of DRX-ed grains. Extrusion with ER of 36 can widely break the intragranular LPSO phases and create a fully DRX-ed microstructure with a relatively random texture, while the lower ER of 7.1 fails to break the LPSO and leads to a bimodal microstructure with a strong basal fiber texture. Finer DRX-ed grains and smaller LPSO phases account for the superior tensile yield strength and elongation of the ER36 alloy. However, the ultimate tensile strength of the ER7.1 alloy catches up because its larger grain size causes an increase in the strain hardening rate.

36 MATERIALS SCIENCE↗

The influence of N-acetyl-L-cysteine on damage of porcine oocyte exposed to zearalenone in vitro

Zearalenone (ZEA), one of the mycotoxins produced by Fusarium fungi, impacts porcine reproduction by interfering with the estrogen signaling pathway. Previous studies have shown that ZEA inhibits porcine oocyte maturation through the formation of aberrant spindle. To explore the effect of ZEA on porcine oocyte meiotic maturation, the extent of both nuclear and cytoplasmic maturation was examined in this study. Compared with control group, presence of ZEA (3 μM) during oocyte maturation, significantly inhibited the polar body extrusions from 71% to 51%, and significantly increased intracellular reactive oxygen species (ROS) level (12.01 vs. 5.89). Intracellular glutathione (GSH) content in ZEA treatment group was lower than in the control group (1.08 pmol/oocyte vs. 0.18 pmol/oocyte), and cortical granules of cortical area distributed oocytes were reduced (88% vs. 62%). ZEA decreases cumulus expansion in both morphology and mRNA level (HAS2, PTX3, TNFAIP6 and CX43). Addition of N-acetyl-L-cysteine (NAC) to the oocyte maturation media reversed the ZEA-induced inhibition of polar body extrusion (from 69% to 81%), up-regulated ROS (from 7.9 to 6.5), down-regulated GSH content (from 0.16 to 0.82 pmol/oocyte) and recovered cumulus cells expansion in morphology and mRNA level. It is concluded that ZEA affects both oocyte nucleus and cytoplasmic maturation during in vitro maturation, and NAC can reverse these damages to some extent. - Highlights: • ZEA significantly inhibited the polar body extrusions during oocyte maturation. • ZEA significantly increased intracellular ROS level and reduced GSH content. • ZEA disturbed cortical granules of cortical area distributed oocytes. • NAC reversed the ZEA-induced inhibition of oocyte maturation.

60 APPLIED LIFE SCIENCES↗

Experimental tests on commercial Sweet Product Residue (SPR) as a suitable feed for anaerobic bioenergy (H2 + CH4) production

Highlights: • Post-sale refuses was tested as feed for two-step-Anaerobic Digestion (TSAD). • Extrusion was assessed at pilot plant scale process to remove the packaging. • NaOH Pretreatment was evaluated in order to increase the refuses digestibility. • H{sub 2} + CH{sub 4} production via TSAD process was experimentally evaluated. • Energy Sustainability Index were used to evaluate the process: pretreatment + TSAD. - Abstract: Food stores can find themselves in the position of having to dispose of different types of products, such as snacks, confectionery, prepackaged food, drinks and others, Sweet Product Residue (SPR), which presents a great opportunity to produce energy through Anaerobic Digestion (AD), due to its high sugar, carbohidrate and fat contents. In order to valorise SPR, this paper takes into consideration the all necessary treatments; owing the fact that the refuses are constitute by an organic part and packaging (plastic, paper and their combinations), a pretreatment able to remove the latter is necessary. SPR refuse was initially subjected to novel pretreatment approach: extrusion at 200 atm to remove the packaging, and a Basic Pre-treatment (BP) then tested through a Two-Stage AD (TSAD) process, for H{sub 2} and CH{sub 4} productions. The experimental results were analysed considering three parameters: Efficiency (ξ), which takes into account the quantity of the energy produced as hydrogen plus methane that the bioreaction is able to extract; Efficacy (η), which takes into account the efficiency of the actual test, compared with that obtained from a reference test carried out with glucose; Energy Sustainability Index (ESI), which takes into account the total amount of energy produced as H{sub 2} plus CH{sub 4}, and the amount of energy consumed to pre-treat the refuse. The effectiveness of the extrusion process in removing the packaging was very high: about 80% of the organic part present in the SPR was recovered. The obtained results have pointed out that SPR is suitable for energy valorization process: ξ = 50%, η = 0.67 and ESI = 24.4, without the need of basic pre-treatment.

09 BIOMASS FUELS↗

Checkpoint kinases are required for oocyte meiotic progression by the maintenance of normal spindle structure and chromosome condensation

Highlights: • Inhibition of Chk1/2 has no significant effects on germinal vesicle breakdown. • Chk1/2 inhibition results in the first polar body extrusion defects. • Chk1/2 is critically involved in meiotic spindle organization. • Inhibition of Chk1/2 leads to abnormal chromosome condensation. • Chk1/2 is important for the development of MII stage oocytes. Checkpoint kinases (Chk) 1/2 are known for DNA damage checkpoint and cell cycle control in somatic cells. According to recent findings, the involvement of Chk1 in oocyte meiotic resumption and Chk2 is regarded as an essential regulator for progression at the post metaphase I stage (MI). In this study, AZD7762 (Chk1/2 inhibitor) and SB218078 (Chk1 inhibitor) were used to uncover the joint roles of Chk1/2 and differentiate the importance of Chk1 and Chk2 during oocyte meiotic maturation. Inhibition of Chk1/2 or Chk1 alone had no significant effect on germinal vesicle breakdown (GVBD) but significantly inhibited the first polar body (PB1). Interestingly, inhibition of Chk1 alone could not increase or completely block the extrusion of PB1 like Chk1/2 inhibition. Also, Chk1/2 inhibition resulted in defective meiotic spindle organization and chromosome condensation both in MI and metaphase II (MII) stages of oocytes. The location of γ-tubulin and Securin were abnormal or missing, while P38 MAPK was activated by Chk1/2 inhibition. Meanwhile, Chk1/2 inhibition reduced the percentage of the second polar body extrusion and pronuclear formation. In conclusion, our results further understand the functions and regulatory mechanism of Chk1/2 during oocyte meiotic maturation.

60 APPLIED LIFE SCIENCES↗

Tensile and Creep Behavior of Extruded AA6063/SiC{sub p} Al MMCs

Composites of AA6063 Al alloy reinforced with SiC particles (SiC{sub p}) were prepared by the vortex method. Hot extrusion was carried out for the as cast composites with a reduction in area of 25%. Tensile and creep behavior of as-cast and extruded composites were studied at elevated temperatures. Tensile tests carried out at room temperature showed that for the as-cast composites, the addition of SiC{sub p} up to 10% by weight improves the strength but reduces ductility. Further addition of SiC{sub p} reduces the strength and ductility of the composites. At 150 and 300 deg. C the matrix alloy exhibits higher strength than the composites. Extrusion generally raised the strength of the composites at both room and elevated temperatures. Time rupture creep tests carried out at 300 deg. C showed that the composites exhibit higher creep resistance as compared to the matrix alloy except at relatively low stresses where the matrix has a better creep resistance. Extrusion improved the resistance of composites to creep rupture.

36 MATERIALS SCIENCE↗

Study on the recycling of waste PVC compounds from electrical wires

The good mechanical, thermal and electrical properties of poly (vinyl chloride) (PVC) make it a polymer used in many applications, among which is the coating of wires and cables. The processing of PVC for this application is made using the extrusion process. The PVC waste resulting from extrusion can be recycled or placed on landfills. The objective of this work is to develop recycling methods to decrease the amount of PVC stored in landfills. This work evaluated the influence of successive processing of PVC on the final properties of the obtained compound, which will be used in the process of coating wire and cable by extrusion. The mechanical properties of the electrical wires were assessed according to the Brazilian Association of Technical Standards (ABNT NBR 6251). Tests of tensile strength, elongation at break, before and after thermal aging in an oven with air circulation for a period of 168 hours at 100 °C were performed. The degradation of the PVC compound was carried out through Fourier transform infrared spectroscopy (FTIR) and mechanical properties evaluation. The results showed that the compound can be reprocessed five times keeping the minimum requirements of the ABNT NBR 6251 Standard. Reprocessing was stopped upon color changing (yellowing) of the compound. Yellowing is a characteristic degradation behavior by dehydrochlorination of PVC. FTIR analysis showed changes at 1600 cm{sup −1}, 1430 cm{sup −1}, 685 cm{sup −1} and 614 cm{sup −1} bands. The performance of the PVC compound for coating electrical wire and cable was fair, meeting the requirements of the ABNT NBR 6251 Standard even after five reprocessing cycles.

36 MATERIALS SCIENCE↗

Materials for Advanced Ultra-Supercritical (A-USC) Steam Turbines --- A-USC Component Demonstration

The U.S. Advanced Ultra-Supercritical (A-USC) Consortium was formed in 2001 as a government/industry program, sponsored by the U.S. Department of Energy (DOE) and the Ohio Coal Development Office (OCDO) and cost shared by industrial and not-for-profit partners. The purpose of the consortium was to advance the state of the art for power generation by evaluating and developing materials that allow the use of advanced steam cycles in coal-based power plants. These advanced cycles, with steam temperatures up to 1400°F (760°C), can increase the efficiency of coal-fired boilers from an average of 35% (current U.S. fleet) to more than 45% higher heating value (HHV) (>49% lower heating value [LHV]). The increase in a plant’s efficiency is limited unless new materials able to withstand these higher operating temperatures and pressures are identified and approved for use. The A-USC Consortium identified these needed materials during earlier phases of the program. It developed the welding and joining techniques along with manufacturing processes for casting and wrought products made from these new high-nickel alloys. It subjected these materials to extensive laboratory and steam loop testing. It then obtained ASME code approval for their use in U.S. boiler systems. The program’s successes leave this last remaining activity (ComTest Phase 2) that the U.S. utility industry has recommended to be accomplished prior to commercialization. The focus of the activity is the evaluation and demonstration of commercial readiness for “full scale” components to be made from these nickel-based alloy materials and provided by a U.S. domestic supply chain that is new to working with these alloys. According to studies completed by the Electric Power Research Institute (EPRI), the cost of an A-USC plant is approximately 20% higher than a non-A-USC plant because of its use of nickel-based alloys needed for the high temperature operating conditions. However, CO 2 reductions of approximately 30% from the current fleet average provide a strong incentive for its consideration. The actual costs and perceived value for CO 2 abatement will determine whether new or retrofitted plants are undertaken, although decisions to build A-USC plants in India would indicate its economic feasibility while also being part of a global carbon emissions strategy. The work by the A-USC Consortium, prior to the start of the ComTest project, has included lab scale and pilot scale materials testing, both in air and oxy-combustion. This testing has included air-cooled and steam-cooled “loops” that were installed into existing operating utility boilers to gain exposure of these materials to realistic conditions of high temperature and corrosion caused by the constituents in the coal ash. The A-USC Consortium also gained ASME Code approval of the Inconel 740 material, has cast and extruded the largest high nickel precipitation hardened alloys, and developed unique welding techniques to avoid problems identified by the competing European program. However, as valuable as these material test loops and accomplishments have been for obtaining information, their scale is below that required to minimize the risk associated for a U.S. utility to build a multibillion-dollar A-USC power plant. To reduce the final identified risk barrier to full-scale commercialization of these advanced materials and systems, the A-USC Consortium (guided by a utility industry advisory committee) has identified the key areas of the technology they desire to see as being capable of full-scale manufacturing and/or fabrication from an identified, capable U.S. domestic supplier base. A significant amount of work was accomplished during Phase 1 to identity the components, as well as the component size, that would be manufactured from advanced alloys such as Inconel 740H or Haynes 282 alloys. Pathways to supply these components for ComTest have been identified, as well as any further development that would be required. The Phase 2 effort used Phase 1 findings for designing these key full-scale components for A-USC boilers and turbines to include large castings; extrusions, forgings, fabrication of water walls and steam loops with headers from advanced materials, raw material (such as pipe extrusion billets) are at the commercial readiness level to permit advancement to a demonstration project. The Phase 2 work scope was addressed by a diverse team, including government, industry, and not-for-profit partners. The work scope under Phase 2 addressed fabrication of components identified as being outside of the proven capabilities of the existing supply chain, including the following: Steam turbine rotor forging and Haynes 282 nozzle carrier casting Superheater and reheater header and tube assemblies Large-diameter pipe extrusions and forgings Test valve articles to support ASME Code approval. In addition, key fabrication steps were completed, including boiler weld overlays and simulated field repairs. Throughout, extensive inspection and quality assurance testing of the components were performed. The team worked to advance ASME Code approval for key components and processes. Although much of the focus of ComTest Phase 2 was the high-temperature nickel-based alloy materials, a broader range of materials were incorporated, which would be representative of the materials used in full-scale A-USC power plant applications and have cross-cutting applicability on other high-temperature power generation options, such as advanced nuclear, supercritical CO 2 cycles, and central solar receivers. This report that has been submitted is organized in the following manner: Section 1 contains an Executive Summary. Section 2 discusses the ComTest project background and organization. Section 3 discusses project management and reporting. Section 4 discusses the procurement of nickel-based alloy and other A-USC materials and components. Section 5 discusses the fabrication of procurement of nickel-based alloy and other A-USC materials and components. Section 6 discusses the fabrication of cast nickel-based A-USC steam turbine components. Section 7 discusses the fabrication of forged nickel-based A-USC steam turbine piping and steam pipe components. Section 8 discusses the qualification of pressure relieve valves (PRVs) for A-USC power plants. Section 9 discusses proposed plans for future evaluation of A-USC components. Section 10 contains the summary and conclusion.

01 COAL, LIGNITE, AND PEAT↗

Fabrication of Extruded Polyphenylsulfone – Boron Nitride Composite Tapes

Polyphenylsulfone (PPSU) is a high-temperature, chemically resistant thermoplastic with high impact resistance that is often used in interior aircraft cabin components, medical devices, and membranes. The aforementioned properties have led to interest investigating PPSU’s compatibility with hexagonal boron nitride (hBN) platelets as a thermally conductive, electrical composite insulator for high power-density electric machines. Preliminary trials extruding PPSU-hBN composite tapes showed promising dielectric properties and higher thermal conductivity as a function of hBN concentration compared to their neat analog. On the other hand, only few studies have reported on the extrusion process and resulting thermo-mechanical properties for PPSU and its composites made with chopped fiber reinforcement or fillers, none of which containing boron nitride filler. Prospects may exist for this type of material to be incorporated into extrusion-based additive manufacturing techniques to print other composites bearing unique properties useful for aerospace. Loading levels with up to approximately 23 wt% were achieved using micro-size BN platelets without observing any significant affects to PPSU’s glass-transition temperature. This work includes a description of the rheological properties of PPSU, the extrusion parameters for mixing and compounding the PPSU-hBN composite tapes, and the thermal and thermo-mechanical properties of PPSU-hBN composites.

polyphenylsulfone↗

Nondestructive Evaluation of Alkali-Silica Reaction in High-Strength Concrete for Aging Structures Sustainability

Concrete is a multiphase geo-material, which is utilized extensively in passive supporting and shielding structures at nuclear facilities. Chemo-mechanical degradation of concrete in old structures is a challenge to sustainability of aging commercial light water reactors. Alkali-silica reaction (ASR) is a common slowly evolving chemo-mechanical damage mechanism of concrete, which could take tens of years to reach the threshold stage when visible cracks appear in a concrete structure. In ASR, concrete constituents react with each other, namely the alkalis in the pore solution of hydrated cement paste (mostly K{sup +}OH{sup -} and Na{sup +}OH{sup -}) react with non-crystalline silica (SiO{sub 2}) of the aggregates to form highly hydrophilic gel. At sufficient levels of ambient relative humidity (typically above 85%), imbibition of water causes expansion of the ASR gel, which results in cracking of constrained reinforced concrete and ultimate structural weakening below safety margin levels. Stability and functional performance of concrete structures potentially suffering from chemo-mechanical deterioration due to ASR is evaluated in a multi-stage process involving material evaluation and structural engineering analysis. Existing methods used by industry for concrete material evaluation are based on extrusion of cores from multiple locations in a structure, and destructive laboratory tests on cores. Because each destructive test requires separate core extrusion, the total number of cores taken from the structure at once could be numbering in hundreds. Laboratory tests include petrography (high resolution optical microscopy of core sections) to develop damage rating index (DRI) score of concrete cores. Another test may involve chemical pore solution extraction from cores, and solution speciation analysis using inductively coupled plasma and mass spectroscopy (ICP/MS). Other tests may consist of mechanical evaluation of cores strength and fracture toughness. The DRI score of concrete material as well as other information obtained from the laboratory tests is subsequently used in structural engineering calculations, where stresses in the entire structure are modeled to evaluate its safety and mechanical stability. Extrusion of a large number of cores is highly undesirable for evaluation of nuclear facility concrete structures. The amount of destructive material testing could be minimized by developing methods for in-situ NDE of ASR to quantify the amount of deterioration that is occurring in the structure, and to identify areas in the structure where more deterioration may be occurring.

36 MATERIALS SCIENCE↗

Additive Manufacturing of Thermal Energy Storage Composites with Microencapsulated Phase Change Materials Supported in a Multipolymer Matrix

Additive manufacturing (AM) techniques to directly integrate phase change materials (PCMs) are of interest for efficient thermal energy storage (TES) architectures. Complex, high surface-to-volume ratio composites embedded with PCM can improve thermal management with reduced material waste for customizable device fabrication. Reducing feature sizes of TES-integrated heat exchangers using AM can increase heat transfer without thermal conductivity enhancement. Here, composite AM materials containing 60 wt% microencapsulated phase change materials (MEPCM) are fabricated using off-the-shelf printers at common speeds and resolutions. High MEPCM loading in filaments is achieved with powder extrusion using two polymers, thermoplastic-polyurethane (TPU) and polycaprolactone (PCL), that mediate flexibility and rigidity for effective extrusion and printing without filament fracture or buckling. Furthermore, with PCL and TPU at 20 wt% each and 60 wt% MEPCM (P 20 T 20 M 60 ), smooth, form-stable filaments are consistently printed. Powder-based extrusion displays negligible damaging effects on the MEPCM. Printed P 20 T 20 M 60 demonstrates 105 J/g of energy storage with no degradation through 250 thermal cycles, within 5% of the theoretical storage enthalpy. Combining PCL/TPU shows good interfacial adhesion between print layers and produces high surface area objects, like 15% gyroids, and dense, 100% infilled pucks. Prints are also scalable to a 900 cm 3 honeycomb heat exchanger with an estimated 9 Wh energy storage.

25 ENERGY STORAGE↗

Determining elastic anisotropy of textured polycrystals using resonant ultrasound spectroscopy

Abstract Polycrystalline materials can have complex anisotropic properties depending on their crystallographic texture and crystal structure. In this study, we use resonant ultrasound spectroscopy (RUS) to nondestructively quantify the elastic anisotropy in extruded aluminum alloy 1100-O, an inherently low-anisotropy material. Further, we show that RUS can be used to indirectly provide a description of the material’s texture, which in the present case is found to be transversely isotropic. By determining the entire elastic tensor, we can identify the level and orientation of the anisotropy originated during extrusion. The relative anisotropy of the compressive (c 11 /c 33 ) and shear (c 44 /c 66 ) elastic constants is 1.5% ± 0.5% and 5.7% ± 0.5%, respectively, where the elastic constants (five independent elastic constants for transversely isotropic) are those associated with the extrusion axis that defines the symmetry of the texture. These results indicate that the texture is expected to have transversely isotropic symmetry. This finding is confirmed by two additional approaches. First, we confirm elastic constants and the degree of elastic anisotropy by direct sound velocity measurements using ultrasonic pulse echo. Second, neutron diffraction (ND) data confirm the symmetry of the bulk texture consistent with extrusion-induced anisotropy, and polycrystal elasticity simulations using the elastic self-consistent model with input from ND textures and aluminum single-crystal elastic constants render similar levels of polycrystal elastic anisotropy to those measured by RUS. We demonstrate the ability of RUS to detect texture-induced anisotropy in inherently low-anisotropy materials. Therefore, as many other common materials have intrinsically higher elastic anisotropy, this technique should be applicable for similar levels of texture, providing an efficient general diagnostic and characterization tool.

36 MATERIALS SCIENCE↗

Thermo-Mechanical Properties of Injection Molded Components Manufactured by Engineered Biodegradable Blends

Engineering of ductile, tough and thermal resistant PLA-based materials requires blending of PLA with other constituents by reactive twin-screw co-rotating extrusion to achieve compounds with adequate thermo-mechanical properties. Then, the compound of the polymeric blends must be melt processed to the final shape with an additional technology, namely the injection molding. The two-stage process the polymeric blends must undergo and the different rheological properties the blends must feature to be suitable to the different processing steps make extremely difficult to engineer the material. Extrusion compounding requires high viscous materials low melt flow index (MFI), while injection molding requires materials with low viscosity (high MFI). To overcome these shortcomings, this manuscript deals with the design of novel biodegradable PLA-based blends that rely on mixing PLA grades with different MFI (i.e. very low for extrusion and high for injection molding), each chosen to feature the rheological characteristics needed for each step of the two-stage transformation process. The ratio of the two PLA-grades inside the blends was the matter of the present investigation. The blends were subsequently tested for the manufacturing of single-use biodegradable and thermal resistant injection molded small cups, specifically designed for brewing of hot beverages. Lastly, the thermo-mechanical performance of the as-is and annealed cups were studied. Experimental evidences show blending of two-different grades of PLA is a promising route to formulate low impact polymeric materials suitable for demanding packaging solutions.

36 MATERIALS SCIENCE↗

Planar slicing for nonextrusion AM processes

Extrusion-based AM processes, including material extrusion and directed energy deposition, construct objects by continuously depositing a relatively small amount of molten feedstock to a specific location. Nonextrusion AM processes, on the other hand, tend to form each layer by linearly or areally projecting either energy onto a vat of photocurable liquid or a binding agent into a bed of loose powder. Such systems vary significantly from extrusion-based AM processes but do share similarities. The general approach to path planning is the same, but nonextrusion processes typically favor the use of bitmap representations, instead of polygons, for pathing computation and do not use a g-code file to command the printer. In this chapter, a high-level discussion of these differences will be covered.

Macdonald, Eric↗

Multiscale porosity characterization in additively manufactured polymer nanocomposites using micro-computed tomography

Extrusion-based additive manufacturing (AM) of polymer composites exhibits complex thermally driven phenomena that introduce severe discontinuities in the internal structure across length scales, especially voids or porosity. This study utilizes a high-throughput porosity characterization technique to analyze large datasets from numerous micro-computed tomography (mu CT) scans to capture the influence of AM print parameters on the size, shape, and location of porosity across multiple print layers (up to a few cm) on fused granular fabrication (FGF) printers. The materials investigated include nanocomposite formulations based on commercially relevant nylon-12 and polyether ketone ketone (PEKK) materials comprising nano- or micro- sized fillers. The estimated global porosity follows an inverse linear correlation against the bulk density of the printed samples. Increasing the extrusion multiplier (EM) and the nozzle temperature while decreasing the print speeds reduces the global porosity. Outlier analyses (local porosity morphology) show that faster print speeds and higher extrusion rates result in long, slender inter-layer voids, while lower nozzle temperatures lead to large, symmetrical, inter-bead voids (at the bead junction). Lack of active chamber temperature increases inter-layer and intra-bead voids with a two-fold increase in global porosity. Overall, the micro filler-reinforced composites exhibit higher global porosity than nanofiller-reinforced composites, which is attributed to the increased mismatch in the thermal expansion coefficient between the filler and the polymers used in the study.

36 MATERIALS SCIENCE↗