Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “EXCITON MODEL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

What Determines the Wave Function of Electron-Hole Pairs in Polariton Condensates?

The ground state of a microcavity polariton Bose-Einstein condensate is determined by considering experimentally tunable parameters such as excitation density and detuning. During a change in the ground state of Bose-Einstein condensate from excitonic to photonic, which occurs as the excitation density is increased, the origin of the binding force of electron-hole pairs changes from Coulomb to photon-mediated interactions. The change in the origin gives rise to the strongly bound pairs with a small radius, like Frenkel excitons, in the photonic regime. The phase diagram obtained provides valuable information that can be used to build theoretical models for each regime.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Exciton-exciton interactions in CdWO{sub 4} irradiated by intense femtosecond vacuum ultraviolet pulses

Exciton-exciton interaction is experimentally revealed and quantitatively analyzed in a wide band-gap scintillator material CdWO{sub 4}. Under high-intensity femtosecond vacuum ultraviolet excitation, the CdWO{sub 4} luminescence is quenched, while its decay becomes essentially nonexponential. We propose an analytical model, which successfully reproduces the decay kinetics recorded in a wide range of excitation densities. The dipole-dipole interaction between excitons leading to their nonradiative decay is shown to be the main cause of a nonproportional response common for many scintillators.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Temperature-dependent conformations of exciton-coupled Cy3 dimers in double-stranded DNA

Understanding the properties of electronically interacting molecular chromophores, which involve internally coupled electronic-vibrational motions, is important to the spectroscopy of many biologically relevant systems. In this paper, we apply linear absorption, circular dichroism, and two-dimensional fluorescence spectroscopy to study the polarized collective excitations of excitonically coupled cyanine dimers (Cy3) 2 that are rigidly positioned within the opposing sugar-phosphate backbones of the double-stranded region of a double-stranded (ds)–single-stranded (ss) DNA fork construct. We show that the exciton-coupling strength of the (Cy3) 2 -DNA construct can be systematically varied with temperature below the ds–ss DNA denaturation transition. We interpret spectroscopic measurements in terms of the Holstein vibronic dimer model, from which we obtain information about the local conformation of the (Cy3) 2 dimer, as well as the degree of static disorder experienced by the Cy3 monomer and the (Cy3) 2 dimer probe locally within their respective DNA duplex environments. The properties of the (Cy3) 2 -DNA construct we determine suggest that it may be employed as a useful model system to test fundamental concepts of protein-DNA interactions and the role of electronic-vibrational coherence in electronic energy migration within exciton-coupled bio-molecular arrays.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Interlayer Coupling and Gate-Tunable Excitons in Transition Metal Dichalcogenide Heterostructures

Bilayer van der Waals (vdW) heterostructures such as MoS 2 /WS 2 and MoSe 2 /WSe 2 have attracted much attention recently, particularly because of their type II band alignments and the formation of interlayer exciton as the lowest-energy excitonic state. In this work, we calculate the electronic and optical properties of such heterostructures with the first-principles GW+Bethe–Salpeter Equation (BSE) method and reveal the important role of interlayer coupling in deciding the excited-state properties, including the band alignment and excitonic properties. Our calculation shows that due to the interlayer coupling, the low energy excitons can be widely tuned by a vertical gate field. In particular, the dipole oscillator strength and radiative lifetime of the lowest energy exciton in these bilayer heterostructures is varied by over an order of magnitude within a practical external gate field. We also build a simple model that captures the essential physics behind this tunability and allows the extension of the ab initio results to a large range of electric fields. In conclusion, our work clarifies the physical picture of interlayer excitons in bilayer vdW heterostructures and predicts a wide range of gate-tunable excited-state properties of 2D optoelectronic devices.

36 MATERIALS SCIENCE↗

Strong Electron–Phonon Coupling and Self-Trapped Excitons in the Defect Halide Perovskites A 3 M 2 I 9 (A = Cs, Rb; M = Bi, Sb)

The optical and electronic properties of Bridgman grown single crystals of the wide-bandgap semiconducting defect halide perovskites A3M2I9 (A = Cs, Rb; M = Bi, Sb) have been investigated. Intense Raman scattering was observed at room temperature for each compound, indicating high polarizability and strong electron–phonon coupling. Both low-temperature and room-temperature photoluminescence (PL) were measured for each compound. Cs3Sb2I9 and Rb3Sb2I9 have broad PL emission bands between 1.75 and 2.05 eV with peaks at 1.96 and 1.92 eV, respectively. The Cs3Bi2I9 PL spectra showed broad emission consisting of several overlapping bands in the 1.65–2.2 eV range. Evidence of strong electron–phonon coupling comparable to that of the alkali halides was observed in phonon broadening of the PL emission. Effective phonon energies obtained from temperature-dependent PL measurements were in agreement with the Raman peak energies. A model is proposed whereby electron–phonon interactions in Cs3Sb2I9, Rb3Sb2I9, and Cs3Bi2I9 induce small polarons, resulting in trapping of excitons by the lattice. The recombination of these self-trapped excitons is responsible for the broad PL emission. Rb3Bi2I9, Rb3Sb2I9, and Cs3Bi2I9 exhibit high resistivity and photoconductivity response under laser photoexcitation, indicating that these compounds possess potential as semiconductor hard radiation detector materials.

36 MATERIALS SCIENCE↗

Fine Structure of Rydberg Excitons in Cuprous Oxide

In 1952, E.F. Gross and N.A. Karryev discovered excitons of big radius also called the Wannier–Mott excitons. Their energy spectrum, response to external electric and magnetic fields, and also elastic deformations of a crystal were extensively studied in the 1960s–1970s. The second wave of interest to excitons in Cu{sub 2}O crystals appeared comparatively recent, in 2014, after the “giant” highly excited exciton states had been observed in this material. A theoretical description of highly excited exciton states needs, as a rule, new approaches, because, for such states, a deviation from the exactly solved hydrogen-like model becomes substantial and a numerical solution of the Schrödinger equation with allowance made for the features of the crystal energy band structure becomes extremely resource consuming. This report is a brief review of recent theoretical and experimental studies of the fine structure of the exciton energy spectrum in copper protoxide.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Interlayer Exciton Polarons in Mesoscopic V 2 O 5 for Broadband Optoelectronic Synapses

Persistent photoconductivity and optoelectronic synaptic behavior are demonstrated in solution-processed mesoscopic α-phase vanadium pentoxide (V 2 O 5 ) thin films. First-principles simulations coupled with the two-site Holstein polaron hopping model show that vacancies at the terminal oxygen position lead to long recombination times because photoexcited electrons and holes reside on different layers separated by the van der Waals gap, forming a weakly coupled interlayer exciton polaron. Mid-gap polaronic states also significantly broaden the photoresponse of the films to span across visible and infrared wavelengths. By controlling the amplitude/intensity, duration, and/or number of optical pulses, tunable optoelectronic memory functions, such as short-term and long-term plasticity, are experimentally established in V 2 O 5 -based optoelectronic synapses. Furthermore, device fabrication was extended to mechanically flexible ultrathin glass substrates. Flexible optoelectronic synapses maintained high performance after 150 bending cycles.

Phan, Thanh Luan [National Renewable Energy Labora↗

Quasiparticle and Optical Properties of Carrier-Doped Monolayer MoTe 2 from First Principles

The intrinsic weak and highly nonlocal dielectric screening of two-dimensional materials is well-known to lead to high sensitivity of their optoelectronic properties to environment. Less studied theoretically is the role of free carriers in those properties. In this report we use ab initio GW and Bethe-Salpeter equation calculations, with a rigorous treatment of dynamical screening and local-field effects, to study the doping dependence of the quasiparticle and optical properties of a monolayer transition-metal dichalcogenide, 2H MoTe 2 . Here we predict a quasiparticle band gap renormalization of several hundreds of meV for experimentally attainable carrier densities and a similarly sizable decrease in the exciton binding energy. This results in an almost constant excitation energy for the lowest-energy exciton resonance with an increasing doping density. Using a newly developed and generally applicable plasmon-pole model and a self-consistent solution of the Bethe-Salpeter equation, we reveal the importance of accurately capturing both dynamical and local-field effects to understand detailed photoluminescence measurements.

2D material↗

Electrically-Tunable Group Delays Using Quantum Wells in a Distributed Bragg Reflector

There is a growing interest in the fabrication of semiconductor optical group delay lines for the development of phased arrays of Vertical-Cavity Surface-Emitting Lasers (VCSELs). We present a novel structure incorporating In(x)GA(1-x)As quantum wells in the GaAs quarter-wave layers of a GaAs/AlAs distributed Bragg reflector (DBR). Application of an electric field across the quantum wells leads to red shifting and peak broadening of the el-hhl exciton peak via the quantum-confined Stark effect. Resultant changes in the index of refraction thereby provide a means for altering the group delay of an incident laser pulse. We discuss the tradeoffs between the maximum amount of change in group delay versus absorption losses for such a device. We also compare a simple theoretical model to experimental results, and discuss both angle and position tuning of the BDR band edge resonance relative to the exciton absorption peak. The advantages of such monolithically grown devices for phased-array VCSEL applications will be detailed.

Nelson, Thomas R., Jr.↗

Evidence for the Band-Edge Exciton of CuInS 2 Nanocrystals Enables Record Efficient Large-Area Luminescent Solar Concentrators

Ternary I-III-VI 2 nanocrystals (NCs), such as CuInS 2 , are receiving attention as heavy-metals-free materials for solar cells, luminescent solar concentrators (LSCs), LEDs, and bio-imaging. The origin of the optical properties of CuInS 2 NCs are however not fully understood. A recent theoretical model suggests that their characteristic Stokes-shifted and long-lived luminescence arises from the structure of the valence band (VB) and predicts distinctive optical behaviours in defect-free NCs: the quadratic dependence of the radiative decay rate and the Stokes shift on the NC radius. If confirmed, this would have crucial implications for LSCs as the solar spectral coverage ensured by low-bandgap NCs would be accompanied by increased re-absorption losses. Here, by studying stoichiometric CuInS 2 NCs, it is revealed for the first time the spectroscopic signatures predicted for the free band-edge exciton, thus supporting the VB-structure model. At very low temperatures, the NCs also show dark-state emission likely originating from enhanced electron-hole spin interaction. In this study, the impact of the observed optical behaviours on LSCs is evaluated by Monte Carlo ray-tracing simulations. Based on the emerging device design guidelines, optical-grade large-area (30×30 cm 2 ) LSCs with optical power efficiency (OPE) as high as 6.8% are fabricated, corresponding to the highest value reported to date for large-area devices.

36 MATERIALS SCIENCE↗

Bright and dark singlet excitons via linear and two-photon spectroscopy in monolayer transition metal dichalcogenides

We discuss the linear and two-photon spectroscopic selection rules for spin-singlet excitons in monolayer transition-metal dichalcogenides. Our microscopic formalism combines a fully k-dependent few-orbital band structure with a many-body Bethe-Salpeter equation treatment of the electron-hole interaction, using a model dielectric function. We show analytically and numerically that the single-particle, valley-dependent selection rules are preserved in the presence of excitonic effects. Furthermore, we definitively demonstrate that the bright (one-photon allowed) excitons have s-type azimuthal symmetry and that dark p-type excitons can be probed via two-photon spectroscopy. Thus, the screened Coulomb interaction in these materials substantially deviates from the 1/ε₀r form; this breaks the “accidental” angular momentum degeneracy in the exciton spectrum, such that the 2p exciton has a lower energy than the 2s exciton by at least 50 meV. We compare our calculated two-photon absorption spectra to recent experimental measurements.

36 MATERIALS SCIENCE↗

Experimental and computational results on exciton/free-carrier ratio, hot/thermalized carrier diffusion, and linear/nonlinear rate constants affecting scintillator proportionality

Models of nonproportional response in scintillators have highlighted the importance of parameters such as branching ratios, carrier thermalization times, diffusion, kinetic order of quenching, associated rate constants, and radius of the electron track. For example, the fraction ηeh of excitations that are free carriers versus excitons was shown by Payne and coworkers to have strong correlation with the shape of electron energy response curves from Compton-coincidence studies. Rate constants for nonlinear quenching are implicit in almost all models of nonproportionality, and some assumption about track radius must invariably be made if one is to relate linear energy deposition dE/dx to volume-based excitation density n (eh/cm3) in terms of which the rates are defined. Diffusion, affecting time-dependent track radius and thus density of excitations, has been implicated as an important factor in nonlinear light yield. Several groups have recently highlighted diffusion of hot electrons in addition to thermalized carriers and excitons in scintillators. However, experimental determination of many of these parameters in the insulating crystals used as scintillators has seemed difficult. Subpicosecond laser techniques including interband z scan light yield, fluence-dependent decay time, and transient optical absorption are now yielding experimental values for some of the missing rates and ratios needed for modeling scintillator response. First principles calculations and Monte Carlo simulations can fill in additional parameters still unavailable from experiment. As a result, quantitative modeling of scintillator electron energy response from independently determined material parameters is becoming possible on an increasingly firmer data base. This paper describes recent laser experiments, calculations, and numerical modeling of scintillator response.

Williams, Richard↗

Synthetic Tuning of Exciton–Phonon Coupling in Janus WS 2(1-x) Se 2x Monolayers Revealed by Resonant Raman Excitation Spectroscopy for Optoelectronic Applications

Janus monolayers, such as WSSe, have broken out-of-plane symmetry and an intrinsic dipole moment, impacting exciton transport, lifetime, and phonon interactions while imbuing piezoelectric, photocatalytic, and Rashba spin-splitting properties to transition metal dichalcogenides (TMDs). The new properties of this atomically thin material can be used for optoelectronic device applications. As TMDs are converted into Janus monolayers, e.g., top selenization of WS2 to WSSe, the bandgap and structure smoothly evolve, impacting not only the formation of excitons but also their complex interactions with different phonon modes. Resonant Raman excitation profiles (REPs) are uniquely well-suited to reveal both excitonic transitions and exciton–phonon coupling. Here, the resonant REPs of $A^{'}_{1}$ WS 2 and A 1 WSSe modes are measured to understand the strength of their coupling with the A, B, and C excitonic bands of a WS2 monolayer throughout its stepwise transformation into Janus WSSe by pulsed laser deposition (PLD) of energetic selenium species. In situ Raman spectroscopy during deposition is used to controllably prepare stable intermediate Janus structures, WS 2(1-x) Se 2x (0 ≤ x ≤ 0.5), for ex situ measurement of their resonant REPs. As x increases, REPs reveal not only pronounced excitonic bands that gradually shift toward lower photon energies but also strong, mode-selective exciton–phonon coupling. First-principles resonant Raman simulations independently predict this spectral behavior and are shown capable of matching the spectrally broadened, experimentally observed REP profiles in this model system, indicating their strong predictive capability for future experiments. The combination of controlled synthesis, REP characterization, and predictive theory employed here demonstrates a powerful pathway to understand and ultimately tune exciton–phonon interactions for future quantum optical devices.

Janus monolayers↗

Achieving 20.1% Efficiency in Organic Solar Cells Through Interconnected Fibrillar Networks via Local Molecular Stacking

ABSTRACT The performance of organic solar cells (OSCs) is governed by how molecular packing evolves into interconnected networks that facilitate exciton dissociation and charge transport. Using an all‐small‐molecule blend DR3TSBDT:Y6 as a model system, we study how local molecular stacking evolves into performance‐relevant morphology during solvent vapor annealing (SVA) and subsequent thermal annealing (TA). SVA promotes end‐to‐end stacking of amorphous acceptors to form interconnected fibrils, while TA compacts inter‐fibril spacing without disrupting favorable local order. Such molecular‐to‐morphological refinements broaden light absorption, enhance charge transport, and markedly improve device efficiency. Extending this approach to additional blend systems (D18:Y6, D18:L8‐BO, and DR3TSBDT:L8‐BO) yields similar structural evolution and performance gains, with the D18:L8‐BO system achieving up to 20.10% PCE. Our study establishes control over local stacking in amorphous acceptors into fibrillar networks as a general and effective route to realize high‐performance OSCs.

Wu, Junying↗

Emergence of multiple fluorophores in individual cesium lead bromide nanocrystals

Abstract Cesium-based perovskite nanocrystals (PNCs) possess alluring optical and electronic properties via compositional and structural versatility, tunable bandgap, high photoluminescence quantum yield and facile chemical synthesis. Despite the recent progress, origins of the photoluminescence emission in various types of PNCs remains unclear. Here, we study the photon emission from individual three-dimensional and zero-dimensional cesium lead bromide PNCs. Using photon antibunching and lifetime measurements, we demonstrate that emission statistics of both type of PNCs are akin to individual molecular fluorophores, rather than traditional semiconductor quantum dots. Aided by density functional modelling, we provide compelling evidence that green emission in zero-dimensional PNCs stems from exciton recombination at bromide vacancy centres within lead-halide octahedra, unrelated to external confinement. These findings provide key information about the nature of defect formation and the origin of emission in cesium lead halide perovskite materials, which foster their utilization in the emerging optoelectronic applications.

36 MATERIALS SCIENCE↗

Bridging the gap between molecules and materials in quantum chemistry with localized active spaces

The number of materials that “bridge the gap” between single molecules and extended solids, such as metal-organic frameworks and organic semiconductors, has been increasing. Consequently, there is a growing need for modeling approaches that effectively integrate the real-space molecular perspective employed by computational chemists and the reciprocal-space dispersive perspective employed by computational physicists. Here, we propose the localized active space (LAS) approach as a promising method to successfully bridge this gap. The LAS approach extends the active space concept from multiconfigurational methods such as complete active space self-consistent field theory to multiple molecular fragments via a product-form wave function ansatz. Here, we apply this method to solid state phenomena by treating each unit cell as a fragment with different sets of local quantum numbers (e.g., charge and excitation number). State interaction between these LAS states (LASSI) thus provides a comprehensive basis for the study of charge and energy transfer, meeting and surpassing the capabilities of single-reference fragmentation approaches such as constrained density functional theory (cDFT). Most centrally, we show how combining this LASSI approach with multiconfigurational pair-density functional theory (MC-PDFT) provides an elegant and efficient method to compute band structures that capture multiconfigurational character. We apply the LASSI band structure approach to the computation of band gaps in stretched hydrogen chain, polyacetylene, and bulk nickel oxide (NiO), finding good or excellent quantitative agreement with reference values in all cases. Additionally, we use the LAS basis in one-dimensional model systems to demonstrate its ability to treat difficult solid-state phenomena such as exciton transfer and excitation at p-n junctions.

method development↗

Electronic Energy Transfer on CaO Surfaces

We excite low-coordinated surface sites of nanostructured CaO samples using tunable UV laser pulses and observe hyperthermal O-atom emission indicative of an electronic excited-state desorption mechanism. The O-atom yield increases dramatically with photon energy, between 3.75 and 5.4 eV, below the bulk absorption threshold. The peak of the kinetic energy distribution does not increase with photon energy in the range 3.9 to 5.15 eV. These results are analyzed in the context of a laser desorption model developed previously for nanostructured MgO samples. The data are consistent with desorption induced by exciton localization at corner-hole trapped surface sites following either direct corner excitation or diffusion and localization of excitons from higher coordinated surface sites.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Temperature dependence of the photoluminescence emission from In{sub x}Ga{sub 1-x}As quantum wells on GaAs(311) substrates

We studied the photoluminescence (PL) properties of In{sub 0.2}Ga{sub 0.8}As/GaAs quantum well structures grown by molecular beam epitaxy on (311)-oriented substrates. The structure consists of three quantum wells (QWs) of 100, 50, and 25 A nominal thickness. The temperature dependence of the PL emission from the QWs in the range of 5-250 K is reported. Three models by Varshni, Vina, and Paessler, respectively, were employed to analyze the variation in the excitonic energy transitions as a function of temperature. We compared the excitonic behavior with the band gap temperature dependence of bulk In{sub 0.2}Ga{sub 0.8}As and found a difference, as opposed to the unstrained AlGaAs/GaAs system. We attributed this difference to the modification of the QW energy levels by the quantum confinement Stark effect, which is temperature and well width dependent.

36 MATERIALS SCIENCE↗