Results for “E” — Page 28 | Engineering Papers

NASA NTRS2023

Study of Pairwise Deconfliction Metrics to Analyze Air Traffic Complexity in Upper Class E Airspace

Upper Class E Traffic Management (ETM) is envisioned to cooperatively facilitate operations of a diverse set of aerial vehicles, such as high-altitude long-endurance fixed-wing unmanned aircraft (low-speed and high-speed), high-altitude platforms, airships, stratospheric balloons, supersonic unmanned and commercial aircraft, etc., with a wide variety of mission types, performance characteristics, communication, navigation and surveillance capabilities, maneuverability, and on-board avionics in the National Airspace System (NAS) ’above’ 60,000 feet above mean sea level, without an active and direct control from human air traffic controllers. A diverse mixture of aerial vehicle types creates significant challenges in understanding air traffic complexity, which may not correlate strongly with air traffic density. One key step for determining air traffic complexity in upper class E airspace is to first understand pairwise deconfliction metrics such as reachability, reserve area, and reserve flight time for each pair of unique aerial vehicle types under potential conflict. Therefore, pairwise deconfliction metrics are first defined, and analytical equations are derived for conflict resolution using the heading change maneuver. Next, case studies are performed to analyze deconfliction metrics to avoid secondary conflicts in upper class E airspace. The study shows that pairwise deconfliction metrics are functions of maneuverability, performance characteristics, uncertainty in position and velocity, heading angle change, and conflict angle of aerial vehicles. The next step for this research is to build a mathematical model for air traffic complexity using pairwise deconfliction metrics and validate it in an upper Class E simulation environment.

Airspace Complexity↗

NASA NTRSDate not supplied

Study of Pairwise Deconfliction Metrics to Analyze Air Traffic Complexity in Upper Class E Airspace

Upper Class E Traffic Management (ETM) is envisioned to cooperatively facilitate operations of a diverse set of aerial vehicles, such as high-altitude long-endurance fixed-wing unmanned aircraft (low-speed and high-speed), high-altitude platforms, airships, stratospheric balloons, supersonic unmanned and commercial aircraft, etc., with a wide variety of mission types, performance characteristics, communication, navigation and surveillance capabilities, maneuverability, and on-board avionics in the National Airspace System (NAS) ’above’ 60,000 feet above mean sea level, without an active and direct control from human air traffic controllers. A diverse mixture of aerial vehicle types creates significant challenges in understanding air traffic complexity, which may not correlate strongly with air traffic density. One key step for determining air traffic complexity in upper class E airspace is to first understand pairwise deconfliction metrics such as reachability, reserve area, and reserve flight time for each pair of unique aerial vehicle types under potential conflict. Therefore, pairwise deconfliction metrics are first defined, and analytical equations are derived for conflict resolution using the heading change maneuver. Next, case studies are performed to analyze deconfliction metrics to avoid secondary conflicts in upper class E airspace. The study shows that pairwise deconfliction metrics are functions of maneuverability, performance characteristics, uncertainty in position and velocity, heading angle change, and conflict angle of aerial vehicles. The next step for this research is to build a mathematical model for air traffic complexity using pairwise deconfliction metrics and validate it in an upper Class E simulation environment.

Airspace Complexity↗

DOE OSTI2023

Search for the lepton-flavor violating decay of the Higgs boson and additional Higgs bosons in the e μ final state in proton-proton collisions at s = 13 TeV

A search for the lepton-flavor violating decay of the Higgs boson and potential additional Higgs bosons with a mass in the range 110-160 GeV to an e$^{\pm}\mu^{\mp}$ pair is presented. The search is performed with a proton-proton collision data set at a center-of-mass energy of 13 TeV collected by the CMS experiment at the LHC, corresponding to an integrated luminosity of 138 fb$^{-1}$. No excess is observed for the Higgs boson. The observed (expected) upper limit on the e$^{\pm}\mu^{\mp}$ branching fraction for it is determined to be 4.4 (4.7) $\times$ 10$^{-5}$ at 95% confidence level, the most stringent limit set thus far from direct searches. The largest excess of events over the expected background in the full mass range of the search is observed at an e$^{\pm}\mu^{\mp}$ invariant mass of approximately 146 GeV with a local (global) significance of 3.8 (2.8) standard deviations.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2023

Search for the Lepton Flavor Violating Decays B + → K + τ ± ℓ ∓ ( ℓ = e , μ ) at Belle

We present a search for the lepton flavor violating decays B + → K + ⁢$\tau$ ±⁢ ℓ ∓ , with ℓ = (e,μ), using the full data sample of 772×10 6 B$\overline{B}$ pairs recorded by the Belle detector at the KEKB asymmetric-energy e + ⁢e - collider. We use events in which one B meson is fully reconstructed in a hadronic decay mode. We find no evidence for B ± → K ±⁢ $\tau$⁢ℓ decays and set upper limits on their branching fractions at the 90% confidence level in the (1 - 3) × 10 -5 range. The obtained limits are the world’s best results.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

NASA NTRS2014

High-Energy X-Ray Detection of G359.89-0.08 (SGR A-E): Magnetic Flux Tube Emission Powered by Cosmic Rays?

We report the first detection of high-energy X-ray (E (is) greater than 10 keV) emission from the Galactic center non-thermal filament G359.89−0.08 (Sgr A−E) using data acquired with the Nuclear Spectroscopic Telescope Array (NuSTAR). The bright filament was detected up to approximately 50 keV during a NuSTAR Galactic center monitoring campaign. The featureless power-law spectrum with a photon index gamma approximately equals 2.3 confirms a non-thermal emission mechanism. The observed flux in the 3-79 keV band is F(sub X) = (2.0 +/- 0.1) × 10(exp -12)erg cm(-2) s(-1) , corresponding to an unabsorbed X-ray luminosity L(sub X) = (2.6+/-0.8)×10(exp 34) erg s(-1) assuming a distance of 8.0 kpc. Based on theoretical predictions and observations, we conclude that Sgr A−E is unlikely to be a pulsar wind nebula (PWN) or supernova remnant-molecular cloud (SNR-MC) interaction, as previously hypothesized. Instead, the emission could be due to a magnetic flux tube which traps TeV electrons. We propose two possible TeV electron sources: old PWNe (up to (is) approximately 100 kyr) with low surface brightness and radii up to (is) approximately 30 pc or MCs illuminated by cosmic rays (CRs) from CR accelerators such as SNRs or Sgr A*.

X-rays: individual↗

DOE OSTI2024

The role of above-code labeling programs in reducing CO 2 e emissions in residential buildings

Residential buildings account for 15 % of total U.S. carbon dioxide (CO 2 ) emissions. Voluntary, above-code labeling programs, such as the ENERGY STAR and Zero Energy Ready Home programs, can play a crucial role in reducing the carbon footprint of the new construction residential building sector by encouraging adoption of more energy-efficient and lower emissions building practices and technologies. It's important for the industry to understand the carbon dioxide equivalent (CO 2 e) and energy cost savings potential of these programs. Here, to estimate the potential CO 2 e emissions savings for homes built to above-code labeling program levels, it is imperative to have reliable and accurate tools for estimating emissions from buildings. The open-source OpenStudio-ERI workflow employs detailed physics-based building energy modeling (BEM) to estimate energy usage and operational CO 2 e emissions. In this study we use the OpenStudio-ERI workflow and regional, time-varying emissions factors from the Cambium database to compare the CO 2 e emissions and energy costs of homes built to performance levels required by these above-code labeling programs relative to homes built to model energy codes. We present the results of our analysis and provide a range of emissions and annual energy cost savings for the above-code labeling programs.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

DOE OSTI2020

Metabolites of Tobacco- and E-Cigarette-Related Nitrosamines Can Drive Cu 2+ -Mediated DNA Oxidation

Nitrosamine metabolites resulting from cigarette smoking and E-cigarette (E-cig) vaping cause DNA damage that can lead to genotoxicity. While DNA adducts of metabolites of nitrosamines 4-(methylnitrosamino)-1-(3-pyridyl)-1-butanone (NNK) and N-nitrosonornicotine (NNN) are well-known tobacco-related cancer biomarkers, only a few studies implicate NNN and NNK in DNA oxidation in humans. NNK and NNN were found in the urine of E-cigarette users who never smoked cigarettes. This paper proposes the first chemical pathways of DNA oxidation driven by NNK and NNN metabolites in redox reactions with Cu 2+ and NADPH leading to reactive oxygen species (ROS). A microfluidic array with thin films of DNA and metabolic enzymes that make metabolites of NNN and NNK in the presence of Cu 2+ and NADPH was used to estimate relative rates of DNA oxidation. Detection by electrochemiluminescence (ECL) employed a new ECL dye [Os(tpy-benz-COOH) 2 ] 2+ that is selective for and sensitive to the primary DNA oxidation product 8-oxo-7,8-dihydro-2-deoxyguanosine (8-oxodG) in DNA. Enzyme–DNA films on magnetic beads were used to produce nitrosamine metabolites that enter ROS-forming redox cycles with Cu 2+ and NADPH, and liquid chromatography–mass spectrometry (LC–MS) was used to quantify 8-oxodG and identify metabolites. ROS were detected by optical sensors. Metabolites of NNK and NNN + Cu 2+ + NADPH generated relatively high rates of DNA oxidation. Lung is the exposure route in smoking and vaping, human lung tissue contains Cu 2+ and NADPH, and lung microsomal enzymes gave the highest rates of DNA oxidation in this study. Furthermore, E-cigarette vapor contains 6-fold more copper than that in cigarette smoke, which could exacerbate DNA oxidation.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2021

On the Mechanism of Soot Nucleation. III. The Fate and Facility of the E-Bridge

Rotationally-excited dimerization of aromatic moieties is a mechanism proposed recently to explain the initial steps of soot particle inception in combustion and pyrolysis of hydrocarbons. The product of such dimerization, termed E-bridge, is an angled molecular structure composed of two aromatic rings sharing a common bond. The present study explores the immediate fate of the E-bridge. The performed theoretical analysis indicates that abstraction of a bridge H atom by a gaseous H leads to a rapid transformation of the angled to planar structure. The implications of this result is that the collisionally-activated E-bridge formation followed by its flattening effectively increases the size of “planar” aromatic precursors by combining two aromatic moieties with essentially collisional rates, instead of a slower “atom-by-atom” buildup. The faster growth speeds up PAH reaching a size when physical dimerization takes over. Furthermore, the dimerization can be further assisted by the biradicaloid valence structure of the flattened E-bridge.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2022

Radiation-induced reaction kinetics of Zn 2+ with e S - and Cl 2 ˙ - in Molten LiCl–KCl eutectic at 400–600 °C

We report molten chloride salts are currently under consideration as combined coolant and liquid fuel for next-generation molten salt nuclear reactors. Unlike complementary light-water reactor technologies, the radiation science underpinning molten salts is in its infancy, and thus requires a fundamental mechanistic investigation to elucidate the radiation-driven chemistry within molten salt reactors. Here we present an electron pulse radiolysis kinetics study into the behaviour of the primary radiolytic species generated in molten chloride systems, i.e., the solvated electron (e S - ) and di-chlorine radical anion (Cl 2 ˙- ). We examine the reaction of e S - with Zn 2+ from 400–600 °C (E a = 30.31 ± 0.09 kJ mol -1 ), and the kinetics and decay mechanisms of Cl 2 ˙- in molten lithium chloride-potassium chloride (LiCl–KCl) eutectic. In the absence of Zn 2+ , the lifetime of e S - was found to be dictated by residual impurities in ostensibly “pure” salts, and thus the observed decay is dependent on sample history rather than being an intrinsic property of the salt. The decay of Cl 2 ˙- is complex, owing to the competition of Cl 2 ˙- disproportionation with several other chemical pathways, one of which involves reduction by radiolytically-produced Zn + species. Overall, the reported findings demonstrate the richness and complexity of chemistry involving the interactions of ionizing radiation with molten salts.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

DOE OSTI2021

Anisotropic E × B shearing rate in a magnetic island

We derive the E × B shearing rate associated with vortex flow inside a macroscopic magnetic island (MI) in axisymmetric toroidal geometry. Due to the elongation of the MI and incompressibility of the E × B flow, the shearing rate near X-points is much lower than that near the mid-plane (x-axis of the local Cartesian coordinate) of the MI on the same flux surface. Furthermore, the rate formally vanishes at the X-points where the local poloidal magnetic field associated with the MI stagnates. Here, this calculation of E × B shearing profile and, in particular, minimal E × B shear near the X-points is consistent with the recent experimental finding that turbulence tends to spread into an MI through regions around the X-points and can contribute to more thorough quantitative interpretation of the results from experiments and simulations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2025

Anticathode effect on multimodal azimuthal oscillations in electron beam generated E×B plasma

Electron beam (e-beam) generated plasmas with applied crossed electric and magnetic (⁠E x B⁠) fields are promising for low-damage (gentle) material processing. However, these plasmas can be subject to the formation of plasma non-uniformities propagating in the ⁠E x B direction. These rotating plasma structures (or “spokes”) enhance the transport of charged species across the magnetic field, which can harm the gentle processing capability of the plasma. In this work, we investigate the role of electrostatically active boundaries on the spoke formation by incorporating a variable bias conducting boundary (known as an anticathode) placed on the axially opposite side of the cathode. Our findings indicate azimuthal mode suppression occurs when the anticathode is electron collecting. Furthermore, we show selective azimuthal mode suppression by biasing the anticathode to an intermediate potential between the cathode and anode potentials. In conclusion, these findings suggest a link between the axial electron confinement in the e-beam generated plasma and azimuthally propagating plasma structure formation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2025

Multimodal azimuthal oscillations in electron beam generated E×B plasma

Electron beam (e-beam) generated plasmas with applied crossed electric and magnetic (E×B) fields are promising for low-damage material processing. However, these plasmas can be subject to the formation of azimuthally propagating structures that enhance the radial transport of energetic charged species, which can harm the gentle processing capability of the plasma. In this work, we investigate the azimuthal structure formation in an e-beam generated E×B plasma using experimental diagnostics and 2D3V particle-in-cell simulations. Our findings demonstrate the formation of multiple simultaneously occurring azimuthally propagating modes that exhibit nontrivial radial dependence. It is suggested that the multimodal azimuthal spectrum is caused in part by the radial outflow of ions in the plasma.

electron beams↗

DOE OSTI2021

The achievement of the T e,div feedback control by CD 4 seeding on EAST

A multi-function divertor feedback control system has been built on Experimental Advanced Superconducting Tokamak (EAST) to treat the divertor heat load issue. With the real-time data of the Langmuir probes and the impurity seeding, the divertor electron temperature (T e,div ) is well controlled to achieve the partial detachment phase. The first trial of the CD 4 seeding for the T e,div reduction has been achieved on EAST long-pulse discharge. In the seeding phase, the T e,div was maintained close to 5 eV, and the surface temperature of the target plate (T surface,div ) had a reduction of about 150° C. The plasma stored energy had a reduction in the control phase, so it is necessary to find a way to keep the good plasma confinement in the next step. The CD 4 injection also mitigated the low hybrid wave coupling rate in some degree. The big volume of the CD 4 injection lifted the Greenwald density fraction from ~0.4 to ~0.7, which made the SOL into high recycling state. As a result, most of the injected carbon particles were in the high ionized state, and with the lower of the T e,div , the tungsten line emission was suppressed obviously.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2020

Magnetic shear effect on plasma transport at T e / T i ~ 1 through electron cyclotron heating in DIII-D plasmas

The effect of magnetic shear on plasma transport for an electron to ion temperature ratio ( T e / T i ) near unity has been explored in DIII-D utilizing electron cyclotron heating (ECH). Previous reports showed that significant confinement degradation occurred at T e / T i ~ 1 in positive shear (PS) plasmas in DIII-D, whereas reduced confinement degradation was observed in negative central shear (NCS) plasmas. In this study, plasma transport in weak magnetic shear (WS) plasmas with ECH is investigated and compared with that in NCS and PS plasmas. Here the magnetic shears ($\hat s$) are $\hat s$ > 0.5, ~0 and <-0.1 in the core region (ρ~ 0.3–0.4) of PS, WS and NCS plasmas, respectively, and flat or negative inside ρ~ 0.4 in the WS and NCS plasmas. Weak magnetic shear is found to be effective in minimizing degradation of ion thermal confinement as T e / T i increases through ECH application, and an improved confinement factor of H 98y2 ~ 1.2 is maintained, similar to NCS plasmas. At T e / T i ~ 1, the ion thermal diffusivity around an internal transport barrier decreases when changing the magnetic shear from positive to weak or negative shear. Also, reduced local particle and momentum transport was indicated by steeper density and toroidal rotation profiles in the weak and negative shear regimes. Linear gyrokinetic simulations predict little change in growth rates of low-k turbulence with ECH application in the WS and NCS plasmas, which is consistent with the transport and profile analyses.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2024

Search for baryon junctions in e+A collisions at the electron ion collider

Constituent quarks in a nucleon are the essential elements in the standard “quark model” associated with the electric charge, spin, mass, and baryon number of a nucleon. Quantum chromodynamics (QCD) describes nucleon as a composite object containing current quarks (valence quarks and sea (anti-)quarks) and gluons. These subatomic elements and their interactions are known to contribute in complex ways to the overall nucleon spin and mass. In the early development of QCD theory in the 1970s, an alternative hypothesis postulated that the baryon number might manifest itself through a non-perturbative configuration of gluon fields forming a Y-shaped topology known as the gluon junction. In this work, we propose to test such hypothesis by measuring (i) the Regge intercept of the net-baryon distributions for e+(p)Au collisions, (ii) baryon and charge transport in the isobaric ratio between e+Ru and e+Zr collisions, and (iii) target flavor dependence of proton and antiproton yields at large rapidity, transported from the hydrogen and deuterium targets in e+p(d) collisions. Our study indicates that these measurements at the EIC can help determine what carries the baryon number.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2020

PORFLOW Implementation of Vadose Zone Conceptual Model for Naval Reactor Component Disposal Areas in the E-Area Low Level Waste Facility Performance Assessment

PORFLOW models have been developed to implement the proposed conceptual models for the two Naval Reactor Component Disposal Areas (NRCDAs), 643-7E and 643-26E, for the purpose of evaluating dose impacts and producing disposal limits for the E-Area Low-Level Facility (LLWF). New NRCDA conceptual models were proposed by Wohlwend and Butcher (2019) for two areas within/adjacent to the E-Area LLWF used as storage/disposal sites for reactor components from the U.S. Navy since 1987. Naval Reactor (NR) waste is comprised of highly radioactive components consisting of activated corrosion-resistant metal alloy contained within welded thick-walled steel casks, and auxiliary equipment primarily contaminated with lower levels of Activated Corrosion Products (ACPs) residing on the metal surfaces and contained within thinner-walled bolted containers.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

DOE OSTI2022

PORFLOW Implementation of Vadose Zone Conceptual Model for Naval Reactor Component Disposal Area in the E-Area Low Level Waste Facility Performance Assessment

PORFLOW models have been developed to implement the proposed conceptual models for the two Naval Reactor Component Disposal Areas (NRCDAs), 643-7E and 643-26E, for the purpose of evaluating dose impacts and producing disposal limits for the E-Area Low-Level Facility (LLWF). New NRCDA conceptual models were proposed by Wohlwend and Butcher (2019) for two areas within/adjacent to the E-Area LLWF used as storage/disposal sites for reactor components from the U.S. Navy since 1987. Naval Reactor (NR) waste is comprised of highly radioactive components consisting of activated corrosion-resistant metal alloy contained within welded thick-walled steel casks, and auxiliary equipment primarily contaminated with lower levels of Activated Corrosion Products (ACPs) residing on the metal surfaces and contained within thinner-walled bolted containers.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

DOE OSTI2025

TEAMER Technical Support on Biofouling and Corrosion for E-Wave Technologies LLC Novel (Abstract)

National Technology & Engineering Solutions of Sandia (NTESS) in collaboration with the Pacific Northwest National Laboratory (PNNL), and with guidance from E-Wave, will assess corrosion and biofouling challenges specific to E-Wave’s innovative WEC designed to retrofit into and power existing aquaculture farm infrastructure from ocean waves. The teams will examine coatings via a static raw seawater test and determine the efficacy of coatings for E-Wave’s applications. Samples will include panels of materials provided by E-Wave and coated with three different paint treatments. Fouling will be determined using a staining technique followed by photographic analysis to evaluate fouling intensity on the surface. Materials will also be weighed before and after submersion to facilitate weight change analysis resulting from fouling organisms aggregating on the materials.

16 TIDAL AND WAVE POWER↗