Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Display”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

CROCUS Urban Canyons - Space Science and Engineering Center (SPARC) Doppler lidar data

This is the netCDF format output from the Halo Photonics Streamline XR Doppler lidar that was deployed next to the Space Science and Engineering Center (SPARC) trailer at the University of Illnois-Chicago greenhouse parking lot during CROCUS Urban Canyons. The purpose of collecting this dataset is to provide vertical and horizontal wind profiles for studying the characteristics of turbulence over the urban canyon of Chicago. This data contains the radial velocity, intensity, and backscatter from the vertical profile, range height indicator, and sector scans that were performed over both Intensive Operating Period 1 and 2 of CROCUS Urban Canyons. There are four different types of files: * The Range Height Indicator (RHI) files contain scans that are along a constant azimuth, spanning the entire hemisphere of elevation values above the surface. * The Velocity Azimuth Display (VAD) files contain the raw radial velocity data from the 6-beam, 60 degree scans. * The User1 files contain stacked Plan Position Indicator scans over a 45 degree quadrant over downtown Chicago. * The Stare files contain vertically pointing scans. These are standard netCDF files that can be opened using xarray. The VAD scans can be processed from their raw radial velocities to horizontal wind speeds with the Atmospheric data Community Toolkit (https://arm-doe.github.io/ACT/).

EARTH SCIENCE > ATMOSPHERE > ATMOSPHERIC WINDS↗
DOE OSTI2023

Advanced Visualization for Scientific Data Analysis and Insight [Slides]

This talk will explore how we have used advanced visualization technologies to support analytical reasoning and knowledge discovery. Specifically, we will present several examples detailing some recent scientific successes using state-of-the-art immersive and high-resolution visualization at the National Renewable Energy Laboratory's Computational Science Center. On multiple occasions, we have observed scientists and engineers discover features in their data using advanced visualization technologies that they had not seen in prior investigations of their data on traditional desktop displays. We have embedded more information into our analytics tools, allowing engineers to explore complex multivariate spaces. We have observed how interactions seem to catalyze understanding.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2026

Discovering novel therapeutic V H Hs for emerging viruses: perspectives from VEEV selection strategies

Introduction: Evolution or emergence of a new viral variant is a significant public health concern. Alphaviruses, such as Venezuelan equine encephalitis virus (VEEV), are mosquito-borne viruses which are becoming more prevalent due to expansion of vector habitats. Despite this, there are currently no antiviral therapies or FDA-approved vaccines available to treat or prevent VEEV infection. The increased prevalence of such viruses provides opportunities for novel variants to evolve. Key therapeutic molecules that could be developed against viral pathogens are recombinant antibodies or antibody fragments, such as the variable heavy domain of heavy chain antibodies (V H Hs). Methods: In vitro selections offer a promising pathway for identification of therapeutic antibodies, here we explored isolation of V H Hs using phage and yeast display methodology with three antigen formats 1) recombinant E2, 2) linear peptides of E2, selected based on molecular dynamics analysis, and 3) UV inactivated virus. Results: Here we report four novel “human” V H Hs which bind to the VEEV E2 protein selected using different strategies that include both computational and biochemical design of suitable antigens and whole virus selections. These V H Hs have distinct complementarity-determining regions (CDRs). Multiple VHHs bind to the VEEV viral particles in ELISAs, and we report the peptide epitope recognized by these V H Hs. Discussion: Though non-neutralizing, these V H Hs bind to and sequester VEEV viral particles preventing infection, demonstrating the potential of these V H Hs to perform viral “sponging” which represents a novel therapeutic approach. The selection strategies we report may have applications to further antibody developments against other viruses.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

The E. coli L‐asparaginase V27T mutant: structural and functional characterization and comparison with theoretical predictions

Bacterial L‐asparaginases have been used for over 40 years as anticancer drugs. Ardalan et al. ( Medical Hypotheses 112, 7–17, 2018) proposed that the V27T mutant of Escherichia coli type II L‐asparaginase, EcAII(V27T), should display altered biophysical and catalytic properties compared to the wild‐type enzyme, EcAII(wt), rendering it more favourable as a pharmaceutical. They postulated that EcAII(V27T) would exhibit reduced glutaminolytic activity and be more stable compared to EcAII(wt). Their postulates, however, were purely theoretical. Here, we characterized experimentally selected properties of EcAII(V27T). We found asparaginolytic activity of this mutant unchanged, whereas its glutaminolytic activity was fourfold lower compared with EcAII(wt). We did not observe significant differences in stabilities of EcAII(wt) and EcAII(V27T). Crystal structures of the complexes with L‐Asp and L‐Glu showed considerable differences in binding modes of both substrates.

Biochemistry & Molecular Biology↗
DOE OSTI2023

Compositional Modifications to Alter and Suppress Laves Phases in Al x CrMoTa y Ti Alloys

The development of refractory complex concentrated alloys in the Al–Cr–Mo–Ta–Ti alloy system is reported. Alloys with modified Al and Ta concentrations are designed using CALPHAD tools and produced via arc melting and characterized in both as-cast and annealed forms. Properties of the alloys, nature of the microstructures, and phase transformation behavior are described via X-ray diffraction, microstructural characterization, microhardness, and differential scanning calorimetry. Two alloys, namely, Al 0.25 CrMoTa 0.8 Ti and Al 0.75 CrMoTa 0.8 Ti, are represented by a body-centered-cubic matrix phase after annealing, along with a secondary Cr–Ta Laves phase of the C15 and C14 polytypes, respectively. In as-cast and annealed forms, the Al 0.75 CrMoTa 0.45 Ti alloy comprises a single-bcc phase. Microhardness of the Laves phase containing alloys demonstrates susceptibility to cracking, whereas the Al 0.75 CrMoTa 0.45 Ti alloy displays high specific hardness, signs of ductility as evidenced by slip traces near indentations, and minimal scatter of hardness values.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Controlled In Situ Foaming for Mechanical Responsiveness of Architected Foams

Addition of chemical blowing agents to polysiloxane resins produces foams with closed–cell morphology. Combining this chemistry with the 3D–printing technique direct ink writing (DIW) permits the creation of architected foams with controllable, hierarchical tiers of porosity. Here, using a two–component foaming ink, the extent of foaming can be controlled by incorporating an active mixing printhead as part of the fabrication process. Changes in the mixing speed allows for in situ control of the foaming reaction where the mixing speed is directly correlated with the resulting foaming that occurs upon extrusion. These architected foams display tunable mechanical responses, porosities, and open–to–closed cell ratios. While chemically blown polysiloxane foam is a well–established material, utilizing DIW as fabrication technique presents a novel approach for creating tailored, architected foams that require minimal post–processing.

36 MATERIALS SCIENCE↗
DOE OSTI2024

In Situ Study on Fracture Behavior of Thick-Section Friction Stir-Welded AA 5083 Alloy

Friction stir welding (FSW) produces a gradient microstructure with distinct metallurgical zones. Here, the present study focuses on characterizing the fracture behavior during uniaxial loading across thick-section FSW joint in nonheat-treatable 5083 aluminum alloy. The hardness variation is linked to microstructural features across the weld zones through correlative microscopy. Notably, the heat-affected zone (HAZ) exhibits a lower hardness of 75 HV, while the thermomechanically affected zone (TMAZ) and stir zones (SZ) display a hardness of around 79HV. A marginal difference in hardness in HAZ prompts strain localization in HAZ on the advancing side of the weld, resulting in offset in fracture from the SZ, which is captured through in situ monitoring of the tensile test. Further, the postdeformation analysis reveals crack propagation along the maximum shear stress plane due to the coalescence of microvoids resulting from the fracturing and debonding of second-phase particles. Overall, this study provides valuable insight for optimizing the FSW process of AA 5083 alloy for thick-section applications.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Additive Manufacturing of Thermal Energy Storage Composites with Microencapsulated Phase Change Materials Supported in a Multipolymer Matrix

Additive manufacturing (AM) techniques to directly integrate phase change materials (PCMs) are of interest for efficient thermal energy storage (TES) architectures. Complex, high surface-to-volume ratio composites embedded with PCM can improve thermal management with reduced material waste for customizable device fabrication. Reducing feature sizes of TES-integrated heat exchangers using AM can increase heat transfer without thermal conductivity enhancement. Here, composite AM materials containing 60 wt% microencapsulated phase change materials (MEPCM) are fabricated using off-the-shelf printers at common speeds and resolutions. High MEPCM loading in filaments is achieved with powder extrusion using two polymers, thermoplastic-polyurethane (TPU) and polycaprolactone (PCL), that mediate flexibility and rigidity for effective extrusion and printing without filament fracture or buckling. Furthermore, with PCL and TPU at 20 wt% each and 60 wt% MEPCM (P 20 T 20 M 60 ), smooth, form-stable filaments are consistently printed. Powder-based extrusion displays negligible damaging effects on the MEPCM. Printed P 20 T 20 M 60 demonstrates 105 J/g of energy storage with no degradation through 250 thermal cycles, within 5% of the theoretical storage enthalpy. Combining PCL/TPU shows good interfacial adhesion between print layers and produces high surface area objects, like 15% gyroids, and dense, 100% infilled pucks. Prints are also scalable to a 900 cm 3 honeycomb heat exchanger with an estimated 9 Wh energy storage.

25 ENERGY STORAGE↗
DOE OSTI2019

Hierarchically Porous Multimetal‐Based Carbon Nanorod Hybrid as an Efficient Oxygen Catalyst for Rechargeable Zinc–Air Batteries

Abstract The lack of efficient strategies to address the intrinsic activity, site accessibility, and structural stability issues of metal‐carbon hybrid catalysts is restricting their real‐world implementation on the basis of rechargeable zinc–air batteries. Herein, a dual metal–organic frameworks (MOFs) pyrolysis strategy is developed to regulate the intrinsic activity and porous structure of the derived catalysts, where a Fe 2 Ni_MIL‐88@ZnCo_zeolitic imidazolate framework (ZIF), with a hierarchically porous structure, multifunctional components, and an integrated architecture, acts as an ideal precursor to obtain multimetal based porous nanorod (FeNiCo@NC‐P). Benefitting from the synergetic effect of the multimetal components, facilitated reactant accessibility, and the well‐retained integrated structure, the resultant FeNiCo@NC‐P catalyst exhibits an oxygen reduction reaction half‐wave potential of 0.84 V as well as an oxygen evolution reaction potential of 1.54 V at 10 mA cm –2 . Furthermore, the practical application of FeNiCo@NC‐P in the zinc–air battery displays a low voltage gap and long‐term durability (over 130 h at a current density of 10 mA cm –2 ), which outperforms the commercial noble metal benchmarks. This work not only affords a competitive bifunctional oxygen electrocatalyst for zinc–air batteries but also paves a new way to design and fabricate MOF‐derived materials with tunable catalytic properties.

Ren, Dezhang↗
DOE OSTI2020

Tacky Elastomers to Enable Tear-Resistant and Autonomous Self-Healing Semiconductor Composites

Mechanical failure of π-conjugated polymer thin films is unavoidable under cyclic loading conditions, due to intrinsic defects and poor resistance to crack propagation. Here, the first tear-resistant and room-temperature self-healable semiconducting composite is presented, consisting of conjugated polymers and butyl rubber elastomers. This new composite displays both a record-low elastic modulus (<1 MPa) and ultrahigh deformability with fracture strain above 800%. More importantly, failure behavior is not sensitive to precut notches under deformation. Autonomous self-healing at room temperature, both mechanical and electronic, is demonstrated through the physical contact of two separate films. The composite film also shows device stability in the ambient environment over 5 months due to much-improved barrier property to both oxygen and water. Butyl rubber is broadly applicable to various p-type and n-type semiconducting polymers for fabricating self-healable electronics to provide new resilient electronics that mimic the tear resistance and healable property of human skin.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Enabling Stable High‐Voltage LiCoO 2 Operation by Using Synergetic Interfacial Modification Strategy

Abstract Structural and interfacial instability of the LiCoO 2 cathode under a voltage exceeding 4.5 V (vs Li/Li + ) severely hinders its practical applications for high‐energy‐density lithium batteries. Herein, a modified electrolyte with nitriles (suberonitrile or 1,3,6‐hexanetricarbonitrile) and fluoroethylene carbonate (FEC) coadditives is demonstrated to form an ultrathin and uniform interface layer on LiCoO 2 cathode under a synergetic effect. As such, LiCoO 2 /Li cells display excellent cyclability at a cutoff voltage of 4.6 V with a capacity retention over 72% after 300 cycles and 60% after 200 cycles at 30 and 55 °C, respectively, even achieving operation at a high current rate (10 C) upon 500 cycles as compared to the controls with fast‐falling capacity to zero. Furthermore, an adsorption‐coordination mechanism between nitriles and cobalt and synergetic effect of coadditives are explored by the alliance of spectroscopic analysis and theoretical calculations. The contributed lone‐pairs on the N 2p orbital of nitriles in coordination lowers the real oxidation state of Co 3+/4+ so that it decreases its catalysis on electrolytes, and the synergy from nitrile‐derived species regulates FEC to form an LiF‐containing electron‐insulated interface layer. This work shares a new insight to nitriles with the synergy of coadditives and paves a way to refine (ultra)high‐voltage LiCoO 2 cathode for high‐energy‐density energy storages.

Yang, Xuerui↗
DOE OSTI2020

Suppressing Co-Crystallization of Halogenated Non-Fullerene Acceptors for Thermally Stable Ternary Solar Cells

While photovoltaic blends based on non-fullerene acceptors are touted for their thermal stability, this type of acceptor tends to crystallize, which can result in a gradual decrease in photovoltaic performance and affects the reproducibility of the devices. Two halogenated indacenodithienothiophene-based acceptors that readily co-crystallize upon mixing are studied, which indicates that the use of an acceptor mixture alone does not guarantee the formation of a disordered mixture. The addition of the donor polymer to the acceptor mixture readily suppresses the crystallization, which results in a fine-grained ternary blend with nanometer-sized domains that do not coarsen due to a high T g ≈ 200 °C. As a result, annealing at temperatures of up to 170 °C does not markedly affect the photovoltaic performance of ternary devices, in contrast to binary devices that suffer from acceptor crystallization in the active layer. The results indicate that the ternary approach enables the use of high-temperature processing protocols, which are needed for upscaling and high-throughput fabrication of organic solar cells. Further, ternary devices display a stable photovoltaic performance at 130 °C for at least 205 h, which indicates that the use of acceptor mixtures allows to fabricate devices with excellent thermal stability.

14 SOLAR ENERGY↗
DOE OSTI2021

Cost and Time Effective Lithography of Reusable Millimeter Size Bone Tissue Replicas With Sub‐15 nm Feature Size on A Biocompatible Polymer

Abstract The ability to replicate the microenvironment of biological tissues creates unique biomedical possibilities for stem cell applications. Current fabrication methods are limited by either the control on feature size and shape, or by the throughput and size of the replicas. Here, a novel platform is reported that combines thermal scanning probe lithography (tSPL) with innovative methodologies for the low‐cost and high‐throughput nanofabrication of large area quasi‐3D bone tissue replicas with high fidelity, sub‐15 nm lateral precision, and sub‐2 nm vertical resolution. This bio‐tSPL platform features a biocompatible polymer resist that withstands multiple cell culture cycles, allowing the reuse of the replicas, further decreasing costs and fabrication times. The as‐fabricated replicas support the culture and proliferation of human induced mesenchymal stem cells, which display broad therapeutic and biomedical potential. Furthermore, it is demonstrated that bio‐tSPL can be used to nanopattern the bone tissue replicas with amine groups, for subsequent tissue‐mimetic biofunctionalization. The achieved level of time and cost‐effectiveness, as well as the cell compatibility of the replicas, make bio‐tSPL a promising platform for the production of tissue‐mimetic replicas to study stem cell‐tissue microenvironment interactions, test drugs, and ultimately harness the regenerative capacity of stem cells and tissues for biomedical applications.

Liu, Xiangyu↗
DOE OSTI2021

An Ultrastable Aqueous Iodine-Hydrogen Gas Battery

Rechargeable hydrogen gas batteries are highly desirable for large-scale energy storage because of their long life cycle, high round trip efficiency, fast reaction kinetics, and hydrogen gas profusion. Coupling advanced cathode chemistries with hydrogen gas anode is an emerging and exciting area of research. Here, a novel high-performance aqueous iodine-hydrogen gas (I 2 -H 2 ) battery using iodine as cathode and hydrogen gas as the electrocatalytic anode in environmentally benign aqueous electrolytes is reported. The working chemistry of the battery involves I 2 /I - solid-liquid reactions occurring over the cathode along with H 2 /H 2 O gas-liquid reactions at the anode, achieving a high rate performance of 100 C and long-lasting stability of over 60 000 cycles. Additionally, the static aqueous I 2 -H 2 battery displays a volumetric capacity of 15.5 Ah L -1 along with good self-healing capability towards cell overcharge. The current battery design exhibits robust electrochemical performance irrespective of acidic, neutral, and alkaline electrolyte systems. This study paves the way towards the industrialization of economically effective, high-power density, and long-term I 2 -H 2 batteries for large-scale energy storage applications.

08 HYDROGEN↗
DOE OSTI2021

In Situ Synthesis of Graphene-Coated Silicon Monoxide Anodes from Coa-Derived Humic Acid for High-Performance Lithium-Ion Batteries

Silicon monoxide (SiO) is attaining extensive interest amongst silicon-based materials due to its high capacity and long cycle life; however, its low intrinsic electrical conductivity and poor coulombic efficiency strictly limit its commercial applications. Here low-cost coal-derived humic acid (HA) is used as a feedstock to synthesize in-situ graphene-coated disproportionated SiO (D-SiO@G) anode with a facile method. HRTEM and XRD confirm the well-coated graphene layers on an SiO surface. Scanning Transmission X-ray Microscopy (STXM) and X-ray Absorption Near-Edge Structure (XANES) spectra analysis indicate that the graphene coating effectively hinders the side-reactions between the electrolyte and SiO particles . As a result, the D-SiO@G anode presents an initial discharge capacity of 1937.6 mAh g -1 at 0.1 A g -1 and an initial coulombic efficiency (ICE) of 78.2%. High reversible capacity (1023 mAh g -1 at 2.0 A g -1 ), excellent cycling performance ( 72.4% capacity retention after 500 cycles at 2.0 A g -1 ), and rate capability (774 mAh g -1 at 5 A g -1 ) results are substantial. Full coin cells assembled with LiFePO 4 electrodes and D-SiO@G electrodes display impressive rate performance. These results indicate a promising potential for practical use in high-performance lithium-ion batteries.

25 ENERGY STORAGE↗
DOE OSTI2021

Band Edge Control of Quasi–2D Metal Halide Perovskites for Blue Light–Emitting Diodes with Enhanced Performance

Perovskite light–emitting diodes (PeLEDs) have received great attention for their potential as next–generation display technology. While remarkable progress has been achieved in green, red, and near–infrared PeLEDs with external quantum efficiencies (EQEs) exceeding 20%, obtaining high performance blue PeLEDs remains a challenge. Poor charge balance due to large charge injection barriers in blue PeLEDs has been identified as one of the major roadblocks to achieve high efficiency. Here band edge control of perovskite emitting layers for blue PeLEDs with enhanced charge balance and device performance is reported. By using organic spacer cations with different dipole moments, that is, phenethyl ammonium (PEA), methoxy phenethyl ammonium (MePEA), and 4–fluoro phenethyl ammonium (4FPEA), the band edges of quasi–2D perovskites are tuned without affecting their band gaps. Furthermore, detailed characterization and computational studies have confirmed the effect of dipole moment modification to be mostly electrostatic, resulting in changes in the ionization energies of ≈0.45 eV for MePEA and ≈ –0.65 eV for 4FPEA based thin films relative to PEA–based thin films. With improved charge balance, blue PeLEDs based on MePEA quasi–2D perovskites show twofold increase of the EQE as compared to the control PEA based devices.

36 MATERIALS SCIENCE↗
DOE OSTI2021

A Self-Healable Sulfide/Polymer Composite Electrolyte for Long-Life, Low-Lithium-Excess Lithium-Metal Batteries

Solid electrolyte-protected lithium-metal anodes promise energy-dense, safe cells. While sulfide solid electrolytes enable facile processability and fast ion transport, they suffer from complex chemo-mechanical issues, including Li plating-induced fracture and Li stripping-induced contact loss. To address these issues, a grafting approach is implemented to functionalize the sulfide solid electrolyte (Li 3,85 Sn 0.85 Sb 0.15 S 4 ) with a self-healing unit. This leads to a dynamic bonding between the solid electrolyte network and a mechanically robust polymer scaffold, which reversibly accommodates the volume changes of the lithium-metal anode. Thus, the approach improves the interfacial contact between the lithium-metal anode and the composite electrolyte, enabling stable cycling at a mild stack pressure (160 kPa). With a negative to positive capacity ratio equals to 1, pouch full cells with a high-nickel cathode (nickel content > 90%) and lithium-metal anode display 92% capacity retention for 140 cycles. Engineering the interface between solid electrolyte and the polymeric binder offers a promising pathway to address the chemo-mechanical issues.

36 MATERIALS SCIENCE↗