Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Diffusion coefficient”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Heavy flavor quenching and flow: the roles of initial condition, pre-equilibrium evolution, and in-medium interaction

Within an advanced Langevin-hydrodynamics framework coupled to a hybrid fragmentation-coalescence hadronization model, we study heavy flavor quenching and flow in relativistic heavy-ion collisions. We investigate how the initial heavy quark spectrum, the in-medium energy loss and hadronization mechanisms of heavy quarks, the evolution profile of the pre-equilibrium stage, the medium flow, and the temperature dependence of heavy quark diffusion coefficients influence the suppression and elliptic flow of heavy mesons at the RHIC and the LHC. Our results show that the different modeling of initial conditions, pre-equilibrium evolution, and in-medium interactions can individually yield uncertainties of approximately 10-40% in D meson suppression and flow at a low transverse momentum. Furthermore, we also find that proper combinations of collisional versus radiative energy loss, coalescence versus fragmentation in hadronization, and the inclusion of medium flow are the most important factors for describing the suppression and elliptic flow of heavy mesons.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

The role of B T -dependent flows on W accumulation at the edge of the confined plasma

Abstract Near-separatrix impurity accumulation between the crown and the outer midplane of tokamaks is a common feature in results from codes such as SOLPS-ITER and DIVIMP; however, experimental evidence of accumulation has only recently been obtained and is reported here. The codes find that the poloidal distribution of impurity ions in the scrape-off layer (SOL) depends primarily on toroidal field ( B T )-dependent parallel flow patterns of the background plasma and the parallel ion temperature gradient (∇ ‖ T ion ) force. Experimentally, Mach probes used in L-mode plasmas with favorable (for H-mode access) B T measure fast ( M ∼ 0.3–0.5) inner-target-directed (ITD) background plasma flows at the crown of single-null discharges. This study reports a set of DIVIMP simulations for two similar H-mode discharges from the DIII-D W metal rings campaign differing primarily in B T -direction to assess the effect that fast ITD flows have on the distribution of W ions in the SOL. It is found that for imposed ITD flows of M = 0.3, W ions that otherwise accumulate due to the ∇ ‖ T ion -force are largely flushed out. It is also found that doubling the radial diffusion coefficient from 0.3 to 0.6 m 2 s −1 prevents accumulation due to rapid cross-field transport into the far-SOL, where background plasma flows drain W ions to the divertors. Far-SOL W distributions from DIVIMP are then used to specify input to the impurity transport code 3DLIM, which is used to interpretively model collector probe (CP) deposition patterns measured in the ‘wall-SOL’. It is demonstrated that the deposition patterns are consistent with the DIVIMP predictions of near-SOL accumulation for the unfavorable- B T direction, and little/no accumulation for the favorable- B T direction. The wall-SOL CPs have thus provided the first experimental evidence, albeit indirect, of near-SOL W accumulation—finding it occurs for the unfavorable- B T direction only. For the favorable- B T direction, fast flows can largely prevent accumulation from occurring.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Runaway electron deconfinement in SPARC and DIII-D by a passive 3D coil

The operation of a 3D coil—passively driven by the current quench (CQ) loop voltage—for the deconfinement of runaway electrons (REs) is modeled for disruption scenarios in the SPARC and DIII-D tokamaks. Nonlinear magnetohydrodynamic (MHD) modeling is carried out with the NIMROD code including time-dependent magnetic field boundary conditions to simulate the effect of the coil. Further modeling in some cases uses the ASCOT5 code to calculate advection and diffusion coefficients for REs based on the NIMROD-calculated fields, and the DREAM code to compute the runaway evolution in the presence of these transport coefficients. Compared with similar modeling in Tinguely et al (2021 Nucl. Fusion 61 124003), considerably more conservative assumptions are made with the ASCOT5 results, zeroing low levels of transport, particularly in regions in which closed flux surfaces have reformed. Of three coil geometries considered in SPARC, only the n = 1 coil is found to have sufficient resonant components to suppress the runaway current growth. Without the new conservative transport assumptions, full suppression of the RE current is maintained when the thermal quench MHD is included in the simulation or when the RE current is limited to 250kA, but when transport in closed flux regions is fully suppressed, these scenarios allow RE beams on the order of 1–2 MA to appear. Additional modeling is performed to consider the effects of the close ideal wall. In DIII-D, the CQ is modeled for both limited and diverted equilibrium shapes. In the limited shape, the onset of stochasticity is found to be insensitive to the coil current amplitude and governed largely by the evolution of the safety-factor profile. In both devices, prediction of the q-profile evolution is seen to be critical to predicting the later time effects of the coil.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Isotope mass scaling and transport comparison between JET Deuterium and Tritium L-mode plasmas

The dimensionless isotope mass scaling experiment between pure Deuterium and pure Tritium plasmas with matched $\rho^*$, $\nu^*$ , β n , q and $T_e/T_i$ has been achieved in JET L-mode with dominant electron heating (NBI+ohmic) conditions. 28% higher scaled energy confinement time $B_t\tau_{E,\mathrm{th}}/A$ is found in favour of the Tritium plasma. This can be cast in the form of the dimensionless energy confinement scaling law as $\Omega_i \tau_{E,\mathrm{th}} \sim A^{0.48 \pm 0.16}$. This significant isotope mass scaling is consequently seen in the scaled one-fluid heat diffusion coefficient $A \chi_{\mathrm{eff}}/B_t$ which is around 50% lower in the Tritium plasma throughout the whole plasma radius. The isotope mass dependence in the particle transport channel is negligible, supported also by the perturbative particle transport analysis with gas puff modulation. The comparison of the edge particle fuelling or ionisation profiles from the EDGE2D-EIRENE simulations show that the absolute density differences that are necessary for the dimensionless match in the confined plasma dominate over any isotope mass dependencies of particle fuelling and ionization profiles at the plasma edge. Local GENE simulation results indicate a mild anti-gyroBohm effect at $\rho_\mathrm{tor}$ = 0.6 and thereby a small isotope mass dependence in favour of Tritium on heat transport and a negligible effect on particle transport. A significant fraction of the isotope scaling and reduced heat transport observed in the Tritium plasma is not captured in the GENE and ASTRA-TGLF-SAT2 simulations by simply changing the isotope mass for the same input profiles.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Turbulent drifts of impurity ions as an explanation for anomalous radial transport in the far-SOL of DIII-D

Abstract Successful fusion reactor operation relies on minimal core contamination by impurities, otherwise too much power may be radiated and harm performance. This requires reliable predictions of impurity transport from the scrape-off layer (SOL) into the core, beyond the traditional ‘anomalous’ diffusion approach. We report a set of far-SOL tungsten transport simulations that demonstrate the role of turbulent drifts on radial impurity transport. A turbulent plasma background is simulated using the gyrokinetic SOL code Gkeyll. Tungsten ions are followed within the plasma background using only their drifts. We find that tungsten tends to travel radially outwards with velocities between v r = 300–1200 m s −1 primarily due to polarization drift. We also extract an anomalous radial diffusion coefficient that varies from D r anom = 5–20 m 2 s −1 . These results are compared to and agree with previous interpretive modeling results. We also show how the turbulent polarization drift can transport some tungsten ions from the wall inwards with effective pinch velocities up to 10 000 m s −1 . We conclude that turbulent drifts are a likely explanation for historically anomalous radial impurity transport.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Impact of ionization and transport on pedestal density structure in DIII-D and Alcator C-Mod

Abstract This paper investigates the role of ionization on the pedestal structure using both measurements and modeling for H-mode plasmas on DIII-D and Alcator C-Mod to enhance our ability to predict pedestal behavior in future pilot plants. The impact of the neutral penetration depth on the pedestal density is investigated using dimensionally matching hydrogen and deuterium DIII-D H-mode discharges at low and high electron density. The DIII-D Lyman- α diagnostic measurements show that hydrogen neutrals penetrate deeper inside the plasma on both the high field and low field side, while the pedestal electron density structure is similar for both isotopes. However, as the opaqueness increases we observe that the pedestal density gradient becomes stiff, similar to prior observations on DIII-D and C-Mod (Mordijck 2020 Nuclear Fusion 60 082006). In addition, these results also confirm prior measured and modeled poloidal asymmetries in neutral densities, indicating that to make transport predictions, 2D neutral modeling is necessary. The first direct validation of SOLPS-ITER for the measured brightness, emissivity and neutral densities for three different confinement regimes on C-Mod is introduced. The SOLPS-ITER model shows good agreement, within the constrains of the model for all regimes. In addition, a comparison of SOLPS-ITER modeling for DIII-D and C-Mod shows that as opaqueness increases, the role of divertor fueling and thus poloidal asymmetries in the neutral density profiles decreases. Based on these experimental and modeling results we estimate the size of a potential particle pinch using typical values for the diffusion coefficient for both DIII-D and C-Mod H-mode discharges.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Measurement of the longitudinal diffusion of ionization electrons in the MicroBooNE detector

Accurate knowledge of electron transport properties is vital to understanding the information provided by liquid argon time projection chambers (LArTPCs). Ionization electron drift-lifetime, local electric field distortions caused by positive ion accumulation, and electron diffusion can all significantly impact the measured signal waveforms. This paper presents a measurement of the effective longitudinal electron diffusion coefficient, D L , in MicroBooNE at the nominal electric field strength of 273.9 V/cm. Historically, this measurement has been made in LArTPC prototype detectors. This represents the first measurement in a large-scale (85 tonne active volume) LArTPC operating in a neutrino beam. This is the largest dataset ever used for this measurement. Using a sample of ~70,000 through-going cosmic ray muon tracks tagged with MicroBooNE's cosmic ray tagger system, we measure D L = 3.74 +0.28 -0.29 cm 2 /s.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2025

Multipoint Correlations in Poisson Media

Multipoint correlations in randomly heterogeneous composite media are determined by the probability that a set of points belong to specific phases. They determine a wide range of macroscopic transport properties such as conductivity, dielectric constant, diffusion coefficient, and transmittance. The Poisson model—a random tesselation of space by hyperplanes—provides realistic descriptions of heterogeneous media in, e.g., radiation-transport applications; yet, until now, it has lacked closed-form expressions for its multipoint correlations. We resolve this problem by presenting an exact solution for the multipoint correlations in the Poisson model. By comparing it to Monte Carlo simulations of four-point correlations in three dimensions, we demonstrate the accuracy of our solution. In conclusion, we visualize the multipoint correlations and discuss their features.

Amorphous materials↗
DOE OSTI2020

Theoretical formulation of phase space microbunching instability in the presence of intrabeam scattering for single-pass or recirculation accelerators

Microbunching instability (MBI) has been one of the most challenging issues in designs of high-brightness beam transport lines for single-pass or recirculating accelerators. Although the intrabeam scattering (IBS) has long been studied in lepton or hadron storage rings as a slow diffusion process or in high-intensity proton linear accelerators as one mechanism for the beam halo, the effects of IBS on single-pass or recirculating electron accelerators have drawn attention only in the recent two decades due to emergence of linac-based or energy-recovery-linac-based fourth-generation light sources, which require high-quality electron beams during the beam transport. In this paper we develop a theoretical formulation of microbunching instability in the presence of IBS for single-pass or recirculation accelerators. To quantify MBI with inclusion of IBS, we start from the Vlasov-Fokker-Planck (VFP) equation, combining both collective interactions and incoherent IBS effects. The linearized VFP equation and the corresponding friction and diffusion coefficients are derived. The evolutions of the resultant density and energy modulations are formulated as a set of coupled integral equations. The theoretical formulation is then applied to a recirculating beamline design. The results from the semianalytical calculation are compared and show good agreement with massive particle tracking simulations.

43 PARTICLE ACCELERATORS↗
DOE OSTI2020

Thermal fluctuations in the Landau-Lifshitz-Bloch model

A formulation for thermal noise in the stochastic form of the Landau-Lifshitz-Bloch equation used for modeling the magnetization dynamics at elevated temperatures is presented here. The diffusion coefficients for thermal fluctuations are obtained via the Fokker-Plank equation using the mean-field approximation of the field in defining the free energy. The presented model leads to a mean magnetization consistent with the equilibrium magnetization for small and large particles. The distribution of the magnetization magnitude is of the Maxwell-Boltzmann type. The presented model was tested by studying the equilibrium magnetization in macrospin particles at high temperatures. The model is appealing for multiscale modeling, such as modeling heat assisted magnetic recording systems and all-optical magnetization reversal.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Conductivity of superconductors in the flux flow regime

Here, we develop a theory of conductivity of type-II superconductors in the flux flow regime taking into account random spatial fluctuations of the system parameters, such as the gap magnitude Δ(r) and the diffusion coefficient $\textit{D}$(r). We find a contribution to the conductivity that is proportional to the inelastic relaxation time $τ_{\text{in}}$, which is much longer than the elastic relaxation time. This contribution is due to Debye-type relaxation, and it can be much larger than the conventional flux flow conductivity due to Bardeen and Stephen. The new contribution is expected to dominate in clean superconductors at low temperatures and in magnetic fields much smaller than $H_{\text{c2}}$.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Structure and dynamics of $\mathrm{Fe_{90}}$$\mathrm{Si_3}$$\mathrm{O_7}$ liquids close to Earth's liquid core conditions

Using an artificial neural-network machine learning interatomic potential, we have performed molecular dynamics simulations to study the structure and dynamics of $\mathrm{Fe_{90}}$$\mathrm{Si_3}$$\mathrm{O_7}$ liquid close to the Earth's liquid core conditions. Here, the simulation results reveal that the short-range structural order (SRO) in the $\mathrm{Fe_{90}}$$\mathrm{Si_3}$$\mathrm{O_7}$ liquid is very strong. About 80% of the atoms are arranged in crystallinelike SRO motifs. In particular, ~ $70$% of Fe-centered clusters can be classified as either hexagonal-close-packed-like or icosahedrallike SRO motifs. The SRO clusters centered on Fe, Si, or O atoms are strongly intermixed and homogenously distributed throughout the liquid. The atomic structure of the liquid and the fractions of dominant SRO clusters are not sensitive to pressure/temperature used in the simulations except that the SRO of the O-centered clusters is enhanced close to inner core pressures. The O-diffusion coefficient is about two to three times larger than the Fe and Si ions and increases more rapidly in the deeper core regions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Temperature-induced gradual polymorphic structural crossover in liquid indium, tin, and antimony

Temperature-induced polymorphic structural crossover in metallic liquid indium (In), tin (Sn), and antimony (Sb) is investigated by in situ high-energy x-ray diffraction and ab initio molecular dynamics simulations. The results demonstrate the existence of a temperature-induced reversible and gradual structural crossover in these three liquids, reflecting from both “static” structures, e.g., peak positions of the structure factor and pair distribution function, bond angle distribution, number of tetrahedra, cluster connection, free volume, and dynamical behaviors, including the relaxation time, diffusion coefficient, and non-Gaussian parameter. Further, the main difference from liquid In, Sn, to Sb is that not only the large-sized free volume but also the anharmonicity and the dynamical heterogeneity increase significantly with the appearance of strong covalent bonds. These findings will deepen the understanding of liquid structure and the liquid-liquid transition in metallic liquids.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Quantal diffusion approach for multinucleon transfer processes in the 58,64 Ni + 208 Pb reactions: Toward the production of unknown neutron-rich nuclei

In recent years, substantial efforts have been made for the study of multinucleon transfer reactions at energies around the Coulomb barrier both experimentally and theoretically, aiming at the production of unknown neutron-rich heavy nuclei. It is crucial to provide reliable theoretical predictions based on microscopic theories with sufficient predictive power. Purpose: This article aims to clarify the applicability of the quantal diffusion approach based on the stochastic mean-field (SMF) theory for multinucleon transfer processes. Isotope production cross sections are evaluated for the reactions of 64 Ni + 208 Pb at E c.m. = 268 MeV and 58 Ni + 208 Pb at E c.m. = 270 MeV and are compared with available experimental data. Methods: Three-dimensional time-dependent Hartree-Fock (TDHF) calculations are carried out for a range of initial orbital angular momenta with Skyrme SLy4d functional. Quantal diffusion equations, derived based on the SMF theory, for variances and covariance of neutron and proton numbers of reaction products are solved, with microscopic drift and diffusion coefficients obtained from time evolution of occupied single-particle orbitals in TDHF. Secondary de-excitation processes, both particle evaporation and fission, are simulated by a statistical compound-nucleus de-excitation model, gemini++. Dynamics of a fast isospin equilibration process followed by a slow drift toward the mass symmetry are commonly observed, as expected. Various reaction outcomes are evaluated, including average mass and charge numbers of reaction products, total kinetic energy loss (TKEL), scattering angle, contact time, and production cross sections for primary and secondary products. By comparing with the experimental data, we find that SMF and TDHF quantitatively reproduce experimental data for few-nucleon-transfer channels around the average values. In contrast, for many-nucleon-transfer channels, we find that the SMF approach provides much better description of the experimentally measured isotopic distributions. The results underline the importance of beyond-mean-field effects, especially one-body (mean-field) fluctuations and correlations, in describing multinucleon transfer processes. Moreover, through a combined analysis of SMF with a statistical model, gemini++, we find a significant contribution of transfer-induced fission, which is consistent with the experimental observation. In some cases, the SMF approach overestimates the isotopic width, requiring further improvements of the theoretical description. Possible ways to improve the description are discussed. The SMF approach is designed to describe the quantum many-body problem according to an ensemble of mean-field trajectories, taking into account part of many-body correlations in the description. As it requires feasible computational costs comparable to the ordinary TDHF approach, together with further model improvements, it will be a promising tool in the search for optimal reaction conditions to produce yet-unknown neutron-rich heavy nuclei through the multinucleon transfer reaction.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

Properties of carbon up to 10 million kelvin from Kohn-Sham density functional theory molecular dynamics

Accurately modeling dense plasmas over wide-ranging conditions of pressure and temperature is a grand challenge critically important to our understanding of stellar and planetary physics as well as inertial confinement fusion. In this work, we employ Kohn-Sham density functional theory (DFT) molecular dynamics (MD) to compute the properties of carbon at warm and hot dense matter conditions in the vicinity of the principal Hugoniot. In particular, we calculate the equation of state (EOS), Hugoniot, pair distribution functions, and diffusion coefficients for carbon at densities spanning 8 g/$\mathrm{cm^3}$ to 16 g/$\mathrm{cm^3}$ and temperatures ranging from 100 kK to 10 MK using the Spectral Quadrature method. Here, we find that the computed EOS and Hugoniot are in good agreement with path integral Monte Carlo results and the sesame database. Additionally, we calculate the ion-ion structure factor and viscosity for selected points. All results presented are at the level of full Kohn-Sham DFT-MD, free of empirical parameters, average-atom, and orbital-free approximations employed previously at such conditions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Stochastic and mixed density functional theory within the projector augmented wave formalism for simulation of warm dense matter

Stochastic density functional theory (DFT) and mixed stochastic-deterministic DFT are burgeoning approaches for the calculation of the equation of state and transport properties in materials under extreme conditions. In the intermediate warm dense matter regime, a state between correlated condensed matter and kinetic plasma, electrons can range from being highly localized around nuclei to delocalized over the whole simulation cell. The plane-wave basis pseudopotential approach is thus the typical tool of choice for modeling such systems at the DFT level. Unfortunately, stochastic DFT methods scale as the square of the maximum plane-wave energy in this basis. To reduce the effect of this scaling and improve the overall description of the electrons within the pseudopotential approximation, we present stochastic and mixed DFT approaches developed and implemented within the projector augmented wave formalism. In conclusion, we compare results between the different DFT approaches for both single-point and molecular dynamics trajectories and present calculations of self-diffusion coefficients of solid density carbon from 1 to 50 eV.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Bottomonium properties in the quark-gluon plasma from a lattice-QCD informed 𝑇-matrix approach

Recent computations of bottomonium correlation functions with extended sources in lattice-discretized quantum chromodynamics (lQCD) provide new insights into heavy-quark dynamics at distance scales which are of the order of the inverse temperature. We analyze these results employing the thermodynamic 𝑇-matrix framework, in a continued effort to interpret lQCD data for quarkonium correlation functions in a nonperturbative and self-consistently solved quantum-many-body approach to a strongly coupled quark-gluon plasma (QGP). Its key inputs are the in-medium driving kernel (potential) of the scattering equation and an interference function which implements 3-body effects in the quarkonium coupling to the thermal medium. A simultaneous description of lQCD results for the bottomonium correlators with extended operators and the previously analyzed Wilson line correlators only requires minor refinements of the potential but calls for stronger interference effects at larger separation of the bottom quark and antiquark. We then analyze the poles of the self-consistent 𝑇 matrices on the real axis to assess the survival of the various bound states. Here, we estimate the pertinent temperatures where the poles disappear for the various bottomonium states and discuss the relation to the corresponding peaks in the bottomonium spectral functions. We also recalculate the spatial diffusion coefficient of the QGP and find it to be similar to that in our previous study.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

Virtual Tokamak for Test and Development of Plasma Control Applied to NSTX-U

Safe and efficient operation of tokamak experiments depends on shot preparation prior to the experiment to maximize performance and avoid issues that are predictable consequences of known physics. The General Atomics TokSys toolbox is used to test and develop the plasma control system (PCS) on numerous tokamaks around the world. Tokamaks that use a version of the DIII-D PCS can connect it to a TokSys simulation and control a virtual version of the tokamak with the real PCS. Recent upgrades to the simulation include more detailed profile and transport modeling to support design and implementation of optimized scenarios. The simulation combines a module called “Profiles” that simulates the 1D profiles of density, pressure, and current and a module called “GSevolve'' that evolves the 2D Grad-Shafranov equilibrium. The “Profiles'' module primarily uses simplified models for fueling, heating, and current. The TRANSP code provides precomputed diffusion coefficients and heating/current drive profiles from radio-frequency and neutral beam sources for the scenarios being simulated. The fidelity of a simulation can be enhanced by analyzing it with TRANSP and making corrections to the precomputed values and iterating until convergence. Simulations of the National Spherical Torus Upgrade (NSTX-U) are presented. It is shown that the simulation reproduces the experimental profile evolution. Here, the simulation has also been upgraded to reproduce the experimental outcome at points of bifurcation. This is demonstrated with a simulation of vertical displacement in NSTX-U.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗