Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Defect”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

Associations between cumulative environmental quality and ten selected birth defects in Texas

Abstract Background Causes of most birth defects are largely unknown. Genetics, maternal factors (e.g., age, smoking) and environmental exposures have all been linked to some birth defects, including neural tube, oral cleft, limb reduction, and gastroschisis; however, the contribution of cumulative exposures across several environmental domains in association with these defects is not well understood. Methods The Environmental Quality Index (EQI) and its domains (air, water, land, sociodemographic, built) were used to estimate county‐level cumulative environmental exposures from 2006–2010 and matched to birth defects identified from Texas Birth Defects Registry and live birth records from births in years 2007–2010 ( N = 1,610,709). Poisson regression models estimated prevalence ratios (PR) and 95% confidence intervals (CI) for associations between 10 birth defects and the EQI. Results We observed some positive associations between worst environmental quality and neural tube, anencephaly, spina bifida, oral cleft, cleft palate, cleft lip with and without cleft palate, and gastroschisis [PR range: 1.12–1.55], but near null associations with limb reduction defects. Among domain specific results, we observed the strongest positive associations with the sociodemographic domain across birth defects but varied positive associations among the air and water domains, and negative or null associations with the land and built domains. Overall, few exposure‐response patterns were evident. Conclusions Our results highlight the complexities of cumulative, simultaneous environmental exposures in the prevalence rates of 10 selected birth defects. We were able to explore the impact of overall and domain specific environmental quality on birth defects and identify potential domain specific drivers of these associations.

Krajewski, Alison K.↗

Lattice realizations of topological defects in the critical (1+1)-d three-state Potts model

Topological/perfectly-transmissive defects play a fundamental role in the analysis of the symmetries of two dimensional conformal field theories (CFTs). In the present work, spin chain regularizations for these defects are proposed and analyzed in the case of the three-state Potts CFT. In particular, lattice versions for all the primitive defects are presented, with the remaining defects obtained from the fusion of the primitive ones. The defects are obtained by introducing modified interactions around two given sites of an otherwise homogeneous spin chain with periodic boundary condition. The various primitive defects are topological on the lattice except for one, which is topological only in the scaling limit. The lattice models are analyzed using a combination of exact diagonalization and density matrix renormalization group techniques. Low-lying energy spectra for different defect Hamiltonians as well as entanglement entropy of blocks located symmetrically around the defects are computed. The latter provides a convenient way to compute the g-function which characterizes various defects. Finally, the eigenvalues of the line operators in the “crossed channel” and fusion of different defect lines are also analyzed. The results are all in agreement with expectations from conformal field theory.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Point defect evolution under irradiation: Finite size effects and spatio-temporal correlations

The evolution of point defect concentrations under irradiation is controlled by their diffusion properties, and by their formation and elimination mechanisms. The latter includes the mutual recombination of vacancies and interstitials, and the elimination of point defects at sinks. Two models are traditionally used to predict the defect concentration evolution, the standard rate theory (SRT) and the atomistic kinetic Monte Carlo (AKMC). We show in this work a large discrepancy in the defect concentrations between both methods when the average number of defects in the AKMC simulation box is close or lower than one. The reason is that AKMC naturally captures strong space and time correlations between vacancies and interstitials generated by the finite size of the periodic simulation box. These correlations strongly affect the recombination rate and the point defect concentrations. SRT fails to predict such correlations, and the corresponding solution deviates from the more accurate solution given by the AKMC simulation under similar conditions. These finite size correlation effects are strong when the elimination of point defects occurs by recombination only, but can still be significant in the presence of sinks. In order to account for the spacio-temporal correlation in a continuum framework, we introduce a Correlated Pair Theory (CPT). This theory fully takes into account the correlations between vacancy and interstitial pairs and predicts point defect concentrations in good agreement with AKMC simulations. Inversely, if the goal is for the AKMC to reproduce defect concentrations in bulk using small simulation boxes, the naturally occurring correlations need to be corrected. We show here that the CPT can be used to modify the elimination rates in the AKMC simulations, so as to yield point defect concentrations in agreement with SRT.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Woodgrain defect on tinned steel Flandres foil

Tin electrocoated steel strip, also referred to as Flandres foil, is largely used for manufacturing food containers. Tinplates must have good corrosion resistance, workability, weldability, as well as a bright appearance. The woodgrain defect, a not yet fully understood defect that occurs on tinplates and accounts for their high scrap rate, consists of alternate bands of bright/dull reflectivity and resembles longitudinally cut wood. Observations of the woodgrain defect by scanning electron microscopy showed that the molten tin spreads irregularly during both the melting and solidification stages. X-ray diffraction analyses showed that the metallic tin tended to crystallize in the (200) direction for coupons with and without the woodgrain defect. Nevertheless, the preferential orientation degree decreased for coupons with the woodgrain defect. The rocking curves, also known as omega-scan, showed that the tin grains were uniformly aligned parallel to the strip surface for coupons with no defects, whereas for tinplates with woodgrain, the tin grains were not uniformly oriented, probably due to the misalignment of the grains in relation to the surface. - Graphical abstract: The woodgrain defect occurs on Flandres tinplates and consists in the formation of alternate bands of different reflectivity (bright/dull), which looks like longitudinally cut wood. X-ray diffractometry showed that the typical bright surface of tinplate is associated to the uniform distribution of aligned (200) Sn grains, whereas in tinplate with the woodgrain defect, the Sn grains were not uniformly oriented, due to the misalignment of the (200) Sn planes relative to the surface. Research highlights: {yields} The bright surface of tinplate is associated to the uniform distribution of aligned (200) Sn grains. {yields} The woodgrain defect on tinplate consists in alternate bands of bright/dull appearance. {yields} In tinplate with the woodgrain defect, the Sn grains were not uniformly oriented, due to the misalignment of the (200) Sn planes relative to the surface.

36 MATERIALS SCIENCE↗

Effects of processing defects on the dynamic tensile mechanical behavior of laser-solid-formed Ti-6Al-4 V

Highlights: • Tensile tests are conducted under coupled effects of strain rate and temperature. • Defects act as crack initiation and propagation sites for dynamic tensile fracture. • Dynamic tension-compression asymmetry is due to different behaviors of defects. • Different deformation of defects results in tensile mechanical anisotropy. • Mechanical anisotropy and asymmetry are sensitive to strain rate and temperature. - Abstract: The initial processing defects, i.e. voids, lack-of-fusion pores and inclusions, are the inevitable and unique microstructural features in the Ti-6Al-4 V (Ti64) alloy manufactured by laser solid forming (LSF). This study was to gain insight into the influences of these processing defects on the tensile thermomechanical response of the material under various strain rates of 0.001/s, 500/s, 1000/s and 3000/s, and under a wide range of temperatures from 298 K to 1273 K. The drastic effects of processing defects on the flow stress were founded to be susceptible to tensile loading and increase with the increasing strain rate. The SEM analysis was carried out to further understand the effect of initial processing defects on the dynamic fracture behavior. These processing defects, such as voids and lack-of-fusion pores, are the most vulnerable position to release impact energy instantaneously and then evolve into the initiation site and propagation path for dynamic tensile crack. The tensile crack under high strain rate and high temperature propagates through the columnar prior-β grain boundary α colony. It was analyzed that the typical tension-compression asymmetry in strength is positively associated with the strain rate in the Ti64 alloy by LSF. Such asymmetry is due to the differences in the deformation mechanism of processing defects and in the activated slip system under tensile and compressive loading. Additionally, the anisotropy of the mechanical property was discussed by examining the positive strain rate effects in two orientations (i.e., perpendicular and parallel to the crystal growth direction). This anisotropy is caused by different mechanical behaviors of lack-of-fusion defects and β grain boundary α colony in different orientations.

36 MATERIALS SCIENCE↗

Atomic Oxygen Recombination at Surface Defects on Reconstructed (0001) α-Quartz Exposed to Atomic and Molecular Oxygen

The surface chemistry of silica is strongly affected by the nature of chemically active sites (or defects) occurring on the surface. Here, we employ quantum mechanical electronic structure calculations to study an uncoordinated silicon defect, a non-bridging oxygen defect, and a peroxyl defect on the reconstructed (0001) surface of α-quartz. We characterized the spin states and energies of the defects, and calculated the reaction profiles for atomic oxygen recombination at the defects. We elucidated the diradical character by analyzing the low-lying excited states using multireference wave function methods. We show that the diradical defects consist of weakly coupled doublet radicals, and the atomic oxygen recombination can take place through a barrierless process at defects. We have delineated the recombination mechanism and computed the formation energy of the peroxyl and non-bridging oxygen defects. We found that key recombination reaction paths are barrierless. In addition, we characterize the electronically excited states that may play a role in the chemical and physical processes that occur during recombination on these surface defect sites.

Environmental Molecular Sciences Laboratory↗

Photoluminescence Intensity Fluctuations and Temperature-Dependent Decay Dynamics of Individual Carbon Nanotube sp 3 Defects

Recent demonstration of room temperature, telecommunication wavelength single photon generation by sp 3 defects of single wall carbon nanotubes established these defects as a new class of quantum materials. However, their practical utilization in development of quantum light sources calls for a significant improvement in their imperfect quantum yield (QY~10–30%). PL intensity fluctuations observed with some defects also need to be eliminated. Aiming toward attaining fundamental understanding necessary for addressing these critical issues, we investigate PL intensity fluctuation and PL decay dynamics of aryl sp 3 defects of (6,5), (7,5), and (10,3) single wall carbon nanotubes (SWCNTs) at temperatures ranging from 300 to 4 K. By correlating defect-state PL intensity fluctuations with change (or lack of change) in PL decay dynamics, we identified random variations in the trapping efficiency of E 11 band-edge excitons (likely resulting from the existence of a fluctuating potential barrier in the vicinity of the defect) as the mechanism mainly responsible for the defect PL intensity fluctuations. Furthermore, by analyzing the temperature dependence of PL intensity and decay dynamics of individual defects based on a kinetic model involving the trapping and detrapping of excitons by optically allowed and forbidden (bright and dark) defect states, we estimate the height of the potential barrier to be in the 3–22 meV range. Our analysis also provides further confirmation of recent DFT simulation results that the emissive sp 3 defect state is accompanied by an energetically higher-lying optically forbidden (dark) exciton state.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Probing Defect Sites on CeO2 Nanocrystals with Well-Defined Surface Planes by Raman Spectroscopy and O2 Adsorption

Defect sites play an essential role in ceria catalysis. In this study, ceria nanocrystals with well defined surface planes have been synthesized and utilized for studying defect sites with both Raman spectroscopy and O2 adsorption. Ceria nanorods ({110} + {100}), nanocubes ({100}), and nano-octahedrons ({111}) are employed to analyze the quantity and quality of defect sites on different ceria surfaces. On oxidized surface, nanorods have the most abundant intrinsic defect sites, followed by nanocubes and nano-octahedrons. When reduced, the induced defect sites are more clustered on nanorods than on nanocubes although similar amount (based on surface area) of such defect sites are produced on the two surfaces. Very few defect sites can be generated on the nano-octahedrons due to the least reducibility. These differences can be rationalized by the crystallographic surface terminations of the ceria nanocrystals. The different defect sites on these nanocrystals lead to the adsorption of different surface dioxygen species. Superoxide on one-electron defect sites and peroxide on two-electron defect sites with different clustering degree are identified on the ceria nanocrystals depending on their morphology. Furthermore, the stability and reactivity of these oxygen species are also found to be surface-dependent, which is of significance for ceria-catalyzed oxidation reactions.

Wu, Zili↗

Impact of pre-existing disorder on radiation defect dynamics in Si

The effect of pre-existing lattice defects on radiation defect dynamics in solids remains unexplored. Here, we use a pulsed beam method to measure the time constant of defect relaxation for 500 keV Ar ion bombardment of Si at 100 °C with the following two representative types of pre- existing lattice disorder: (i) point defect clusters and (ii) so-called “clamshell” defects consisting of a high density of dislocations. Results show that point defect clusters slow down defect relaxation processes, while regions with dislocations exhibit faster defect interaction dynamics. These experimental observations demonstrate that the dynamic aspects of damage buildup, attributed to defect trapping-detrapping processes, can be controlled by defect engineering.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Interaction of Sn atoms with defects introduced by ion implantation in Ge substrate

The interaction of Sn atoms with defects induced by Sn implantation of Ge substrates with antimony (Sb) as an n-type dopant and the impact of H{sub 2} annealing on these defects were investigated by comparison with defects induced by Ge self-implantation. In the Ge samples implanted with either Sn or Ge, and annealed at temperatures of less than 200 °C, divacancies, Sb-vacancy complexes with single or double acceptor-like states, and defects related to Sb and interstitial Ge atoms were present. On the other hand, after annealing at 500 °C in an N{sub 2} or H{sub 2} atmosphere, defects with different structures were observed in the Sn-implanted samples by deep level transition spectroscopy. The energy levels of the defects were 0.33 eV from the conduction band minimum and 0.55 eV from the valence band maximum. From the capacitance-voltage (C-V) characteristics, interaction between Sn atoms and defects after annealing at 500 °C was observed. The effect of H{sub 2} annealing at around 200 °C was observed in the C-V characteristics, which can be attributed to hydrogen passivation, and this effect was observed in both the Ge- and Sn-implanted samples. These results suggest the presence of defects that interact with Sn or hydrogen atoms. This indicates the possibility of defect control in Ge substrates by Sn or hydrogen incorporation. Such defect control could yield high-performance Ge-based devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Carrier providers or killers: The case of Cu defects in CdTe

Defects play important roles in semiconductors for optoelectronic applications. Common intuition is that defects with shallow levels act as carrier providers and defects with deep levels are carrier killers. Here, taking the Cu defects in CdTe as an example, we show that relatively shallow defects can play both roles. Using first-principles calculation methods combined with thermodynamic simulations, we study the dialectic effects of Cu-related defects on hole density and lifetime in bulk CdTe. Because CuCd can form a relatively shallow acceptor, we find that increased Cu incorporation into CdTe indeed can help achieve high hole density; however, too much Cu can cause significant non-radiative recombination. We discuss strategies to balance the contradictory effects of Cu defects based on the calculated impact of Cd chemical potential, copper defect concentrations, and annealing temperature on lifetime and hole density. Lastly, these findings advance the understanding of the potential complex defect behaviors of relatively shallow defect states in semiconductors.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Tuning spin–orbit coupling in (6,5) single-walled carbon nanotube doped with sp 3 defects

Single-walled carbon nanotubes (SWCNTs) containing sp 3 defects are a promising class of optoelectronic materials with bright photoluminescence and demonstrated single-photon emission. Using density functional theory simulations, complemented by measurements, we investigate the electronic structure of a series of quantum defects attached to (6,5) SWCNT with the goal of tuning the spin–orbit coupling by introduction of a heavy atom in the defect structure. We characterize the ground state electronic and spin properties of four synthesized and three potential defects on the tube and find that all of the synthesized defects considered introduce a localized midgap defect-centered state containing a single electron, ≈0.2–0.3 eV above the valence band. The spin density is located at the sp 3 defect site with negligible spin–orbit coupling even with the presence of a Pd atom. Three additional functional groups were tested via computation to increase spin localization near the metal, thereby increasing spin–orbit coupling. We predict that only the chlorodiphosphanepalladium(II)– [Cl(PH 3 ) 2 Pd(II)–] defect results in increased spin–orbit splitting of the defect state and the conduction band associated with the pristine-like SWCNT, a measure of the spin–orbit coupling of excited state transitions. This study suggests that for unpassivated sp 3 defects in (6,5) SWCNT, forming a direct bond between a heavy atom and the sp 3 carbon allows for tuning of spin–orbit coupling.

74 ATOMIC AND MOLECULAR PHYSICS↗

Using ground state and excited state density functional theory to decipher 3d dopant defects in GaN

Abstract Using ground state density functional theory (DFT) and implementing an occupation-constrained DFT (occ-DFT) for self-consistent excited state calculations, we decipher the electronic structure of the Mn dopant and other 3 d defects in GaN across the band gap. Our analysis, validated with broad agreement with defect levels (ground-state calculations) and photoluminescence data (excited-state calculations), mandates reinterpretation and reassignment of 3 d defect data in GaN. The Mn Ga defect is determined to span stable charge states from (1−) in n -type GaN through (2+) in p -type GaN. The Mn(2+) is predicted to be a d 2 ground state spin triplet defect with a singlet excited state, isoelectronic with the defect associated with the 1.19 eV photoluminescence in n -type GaN. The combined analysis of defect levels and excited states invites reassessment of all d 2 -capable dopants in GaN. We demonstrate that the 1.19 eV defect, a candidate defect for optically controlled quantum applications, cannot be the Cr(1+) assumed in literature and instead must be the V(0). The combined ground-state/excited-state DFT analysis is shown to be able to chemically fingerprint defects.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Midgap state requirements for optically active quantum defects

Abstract Optically active quantum defects play an important role in quantum sensing, computing and communication. The electronic structure and the single-particle energy levels of these quantum defects in the semiconducting host have been used to understand their optoelectronic properties. Optical excitations that are central for their initialization and readout are linked to transitions between occupied and unoccupied single-particle states. It is commonly assumed that only quantum defects introducing levels well within the band gap and far from the band edges are of interest for quantum technologies as they mimic an isolated atom embedded in the host. In this perspective, we contradict this common assumption and show that optically active defects with energy levels close to the band edges can display similar properties. We highlight quantum defects that are excited through transitions to or from a band-like level (bound exciton) such as the T center and Se S i + in silicon. We also present how defects such as the silicon split-vacancy in diamond can involve transitions between localized levels that are above the conduction band or below the valence band. Loosening the commonly assumed requirement on the electronic structure of quantum defects offers opportunities in quantum defects design and discovery especially in smaller band gap hosts such as silicon. We discuss the challenges in terms of operating temperature for photoluminescence or radiative lifetime in this regime. We also highlight how these alternative type of defects bring their own needs in terms of theoretical developments and fundamental understanding. This perspective clarifies the electronic structure requirement for quantum defects and will facilitate the identification and design of new color centers for quantum applications especially driven by first principles computations.

Xiong, Yihuang (ORCID:0000000178096047)↗

Defect reaction network in Si-doped GaAs: Numerical predictions

This Report characterizes the defect reaction network in silicon doped, n-type GaAs deduced from first principles density functional theory. The reaction network is deduced by following exothermic defect reactions starting with the initially mobile interstitial defects reacting with common displacement damage defects in Si-doped GaAs until culminating in immobile reaction products. The defect reactions and reaction energies are tabulated, along with the properties of all the silicon-related defects in the reaction network. This Report serves to extend the results for intrinsic defects in: P.A. Schultz and O.A. von Lilienfeld, “Simple intrinsic defects in GaAs”, Modelling Simul. Mater. Sci Eng., Vol. 17, 084007 (2009) and its numerical supplement in SAND 2012-2675, and the preliminary silicon defect network results in: P.A. Schultz, “First-principles defect chemistry for modeling irradiated GaAs and III-V semiconductors”, J. Rad. Effects, Res. and Eng. Vol. 30, p257 (2012).

Schultz, Peter Andrew↗

Defect reaction network in C-doped GaAs: Numerical predictions

This Report characterizes the defect reaction network in carbon doped, p-type GaAs deduced from first principles density functional theory. The reaction network is deduced by following exothermic defect reactions starting with the initially mobile interstitial defects reacting with common displacement damage defects in C-doped GaAs until culminating in immobile reaction products. The defect reactions and reaction energies are tabulated, along with the properties of all the carbon-related defects in the reaction network. This Report serves to extend the results for intrinsic defects in: P.A. Schultz and O.A. von Lilienfeld, “Simple intrinsic defects in GaAs”, Modelling Simul. Mater. Sci Eng., Vol. 17, 084007 (2009) and its numerical supplement in SAND 2012-2675, and the preliminary carbon defect network results in: P.A. Schultz, “First-principles defect chemistry for modeling irradiated GaAs and III-V semiconductors”, J. Rad. Effects, Res. and Eng. Vol. 30, p257 (2012).

36 MATERIALS SCIENCE↗

3D Simulation of Missing Pellet Surface Defects in Light Water Reactor Fuel Rods

The cladding on light water reactor (LWR) fuel rods provides a stable enclosure for fuel pellets and serves as a first barrier against fission product release. Consequently, it is important to design fuel to prevent cladding failure due to mechanical interactions with fuel pellets. Cladding stresses can be effectively limited by controlling power increase rates. However, it has been shown that local geometric irregularities caused by manufacturing defects known as missing pellet surfaces (MPS) in fuel pellets can lead to elevated cladding stresses that are sufficiently high to cause cladding failure. Accurate modeling of these defects can help prevent these types of failures. Nuclear fuel performance codes commonly use a 1.5D (axisymmetric, axially-stacked, one-dimensional radial) or 2D axisymmetric representation of the fuel rod. To study the effects of MPS defects, results from 1.5D or 2D fuel performance analyses are typically mapped to thermo-mechanical models that consist of a 2D plane-strain slice or a full 3D representation of the geometry of the pellet and clad in the region of the defect. The BISON fuel performance code developed at Idaho National Laboratory employs either a 2D axisymmetric or 3D representation of the full fuel rod. This allows for a computational model of the full fuel rod to include local defects. A 3D thermo-mechanical model is used to simulate the global fuel rod behavior, and includes effects on the thermal and mechanical behavior of the fuel due to accumulation of fission products, fission gas production and release, and the effects of fission gas accumulation on thermal conductivity across the fuel-clad gap. Local defects can be modeled simply by including them in the 3D fuel rod model, without the need for mapping between two separate models. This allows for the complete set of physics used in a fuel performance analysis to be included naturally in the computational representation of the local defect, and for the effects of the local defect to be coupled with the global fuel rod model. This approach for modeling fuel with MPS defects is demonstrated and compared with alternative techniques. The effects of varying parameters of the MPS defect are studied using this technique and presented here.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Defect Thermodynamics and Transport Properties of Perovskite and Fluorite Materials for Solid-Oxide and Proton Conducting Oxide Cells Evaluated Based on Density Functional Theory Modeling

Density functional theory based defect thermodynamic modeling was performed to determine the effect of humidity and H2/O2 gas pressure on various defect chemistry and transport properties of perovskite and fluorite oxides for solid-oxide and proton-conducting-oxide cell applications, with inclusion of the electronic-conducting oxides (as electrodes) and insulating oxides (as electrolytes). Automatic defect generation workflow and first-principles charged defect analysis were implemented on NETL Joule supercomputer for modeling defect equilibria and transport properties of insulating oxides as electrolytes in SOCs and proton-conducting ceramic cells. A GNU Octave defect model subroutines were developed to facilitate defect modeling of electronic conducting oxides in a wide range of operating conditions guided by modeling and experiments. The model includes the hydride defect formation reaction under reducing conditions and allows to incorporate nonstoichiometry effects on the defect thermodynamic parameters. The developed model serves as a platform to facilitate fundamental understanding of the defect thermodynamics in SOC oxide materials and can be used as a novel tool in computational materials screening for SOC and other energy applications.

Lee, Yueh-Lin↗