Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Data Sources”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28
All sourcesNASA NTRSDOE OSTI
NASA NTRS1989

Hybrid current driver designed for a space-borne laser transmitter

NASA Goddard is developing a free-space laser communication transmitter. Each of the 10 GaAlAs diode lasers in the transmitter must be digitally modulated by individual current drivers from a common data source. In order to fit the miniature laser header modules, a hybrid integrated laser current driver was required. The hybrid, smaller than a postage stamp, can drive 100 mA modulation current at a data rate of 200 Mbit/s NRZ.

Zimmerman, Robert K., Jr.↗
NASA NTRS1994

Comparison of recalculated Dobson and TOMS total ozone at Hradec Kralove, Czechoslovakia, 1978-1990

The reevaluated Dobson total ozone data from Hradec Kralove, Czechoslovakia were compared with independent Total Ozone Mapping Spectrophotometer (TOMS) 'version 6' data set. The comparison was performed by means of the parallel daily averages of ground-based and satellite total ozone pairs of the period November 1978 to December 1990. The comparison showed slight differences between both data series. Their average relative difference is 0.48 percent. The similar results have been reached for subsets of direct sun and zenith types of measurements as well. Their relative differences are 0.61 percent and 0.11 percent respectively. These facts indicate not only good mutual relation of both data sources but also reliability and accuracy of the zenith charts of the spectrophotometer No. 74 used at Hradec Kralove. Preliminary assessment of seasonal MU-dependence of the differences between Dobson and TOMS data was made while using total ozones of winter and summer months representing values of MU=2.70-5.20 and MU = 1.12-1.30 respectively. The results did not show systematic underestimation or overestimation of total ozone due to MU-dependence of the instrument at Hradec Kralove in both seasons.

Stanek, Martin↗
NASA NTRS2005

Forecasting Lightning at Kennedy Space Center/Cape Canaveral Air Force Station, Florida

The Applied Meteorology Unit (AMU) developed a set of statistical forecast equations that provide a probability of lightning occurrence on Kennedy Space Center (KSC) I Cape Canaveral Air Force Station (CCAFS) for the day during the warm season (May September). The 45th Weather Squadron (45 WS) forecasters at CCAFS in Florida include a probability of lightning occurrence in their daily 24-hour and weekly planning forecasts, which are briefed at 1100 UTC (0700 EDT). This information is used for general scheduling of operations at CCAFS and KSC. Forecasters at the Spaceflight Meteorology Group also make thunderstorm forecasts for the KSC/CCAFS area during Shuttle flight operations. Much of the current lightning probability forecast at both groups is based on a subjective analysis of model and observational data. The objective tool currently available is the Neumann-Pfeffer Thunderstorm Index (NPTI, Neumann 1971), developed specifically for the KSCICCAFS area over 30 years ago. However, recent studies have shown that 1-day persistence provides a better forecast than the NPTI, indicating that the NPTI needed to be upgraded or replaced. Because they require a tool that provides a reliable estimate of the daily thunderstorm probability forecast, the 45 WS forecasters requested that the AMU develop a new lightning probability forecast tool using recent data and more sophisticated techniques now possible through more computing power than that available over 30 years ago. The equation development incorporated results from two research projects that investigated causes of lightning occurrence near KSCICCAFS and over the Florida peninsula. One proved that logistic regression outperformed the linear regression method used in NPTI, even when the same predictors were used. The other study found relationships between large scale flow regimes and spatial lightning distributions over Florida. Lightning, probabilities based on these flow regimes were used as candidate predictors in the equation development. Fifteen years (1 989-2003) of warm season data were used to develop the forecast equations. The data sources included a local network of cloud-to-ground lightning sensors called the Cloud-to-Ground Lightning Surveillance System (CGLSS), 1200 UTC Florida synoptic soundings, and the 1000 UTC CCAFS sounding. Data from CGLSS were used to determine lightning occurrence for each day. The 1200 UTC soundings were used to calculate the synoptic-scale flow regimes and the 1000 UTC soundings were used to calculate local stability parameters, which were used as candidate predictors of lightning occurrence. Five logistic regression forecast equations were created through careful selection and elimination of the candidate predictors. The resulting equations contain five to six predictors each. Results from four performance tests indicated that the equations showed an increase in skill over several standard forecasting methods, good reliability, an ability to distinguish between non-lightning and lightning days, and good accuracy measures and skill scores. Given the overall good performance the 45 WS requested that the equations be transitioned to operations and added to the current set of tools used to determine the daily lightning probability of occurrence.

Lambert, Winfred↗
NASA NTRSDate not supplied

The Field Guide to NASA’s Life Sciences Data Repositories

For over 30 years, NASA has invested in life sciences research both in space and on the ground. Data accessibility is an important tool for researchers, and NASA has committed to preserving this vital resource for ongoing use. The Life Sciences Data Archive’s multi-center collaboration between NASA’s Johnson Space Center, Ames Research Center, and Kennedy Space Center is geared toward preserving unique and high-value data from a wide variety of disciplines, data collection methods, and species within NASA’s Life Sciences Portal (NLSP). The data generated by the Human Research Program (HRP) require a systematic approach to data preservation that accounts for diverse data sources, formats, physical storage requirements, and security and privacy protections. This poster presentation will provide a guide to the repositories where the various types of human, non-human animal, plant, and microbial data NASA generates are archived and tips for navigating these data collections. Topics will include where different types of data, metadata, and biospecimens are archived or preserved, how the federated repositories work together as a data preservation ecosystem, and how researchers can access each repository’s collections.

Robert S Beaton↗
NASA NTRSDate not supplied

A Field Guide to NASA’s Life Sciences Data Repositories

For over 30 years, NASA has invested in life sciences research both in space and on the ground. Data accessibility is an important tool for researchers, and NASA has committed to preserving this vital resource for ongoing use. The Life Sciences Data Archive’s multi-center collaboration between NASA’s Johnson Space Center, Ames Research Center, and Kennedy Space Center is geared toward preserving unique and high-value data from a wide variety of disciplines, data collection methods, and species within NASA’s Life Sciences Portal (NLSP). The data generated by the Human Research Program (HRP) require a systematic approach to data preservation that accounts for diverse data sources, formats, physical storage requirements, and security and privacy protections. This poster presentation will provide a guide to the repositories where the various types of human, non-human animal, plant, and microbial data NASA generates are archived and tips for navigating these data collections. Topics will include where different types of data, metadata, and biospecimens are archived or preserved, how the federated repositories work together as a data preservation ecosystem, and how researchers can access each repository’s collections.

LSDA↗
NASA NTRS1978

Deep space telecommunications and the solar cycle: A reappraisal

Observations of density enhancement in the near corona at solar cycle (sunspot) maximum have rather uncritically been interpreted to apply equally well to the extended corona, thus generating concern about the quality of outer planet navigational data at solar cycle maximum. Spacecraft have been deployed almost continuously during the recently completed solar cycle 20, providing two powerful new coronal investigatory data sources: (1) in-situ spacecraft plasma measurements at approximately 1 AU, and (2) plasma effects on monochromatic spacecraft signals at all signal closest approach points. A comprehensive review of these (solar cycle 20) data lead to the somewhat surprising conclusions that for the region of interest of navigational data, the highest levels of charged particle corruption of navigational data can be expected to occur at solar cycle minimum, rather than solar cycle maximum, as previously believed.

Berman, A. L.↗
NASA NTRS2022

Working Toward A National Coordinated Soil Moisture Monitoring Network: Vision, Progress, and Future Directions

Soil moisture is a critical land surface variable, impacting the water, energy, and carbon cycles. While in situ soil moisture monitoring networks are still developing, there is no cohesive strategy or framework to coordinate, integrate, or disseminate these diverse data sources in a synergistic way that can improve our ability to understand climate variability at the national, state, and local levels. Thus, a national strategy is needed to guide network deployment, sustainable network operation, data integration and dissemination, and user-focused product development. The National Coordinated Soil Moisture Monitoring Network (NCSMMN) is a federally led, multi-institution effort that aims to address these needs by capitalizing on existing wide-ranging soil moisture monitoring activities, increasing the utility of observational data, and supporting their strategic application to the full range of decision-making needs. The goals of the NCSMMN are to 1) establish a national “network of networks” that effectively demonstrates data integration and operational coordination of diverse in situ networks; 2) build a community of practice around soil moisture measurement, interpretation, and application—a “network of people” that links data providers, researchers, and the public; and 3) support research and development (R&D) on techniques to merge in situ soil moisture data with remotely sensed and modeled hydrologic data to create user-friendly soil moisture maps and associated tools. The overarching mission of the NCSMMN is to provide coordinated high-quality, nationwide soil moisture information for the public good by supporting applications like drought and flood monitoring, water resource management, agricultural and forestry planning, and fire danger ratings.

C. Bruce Baker↗
NASA NTRS1977

State-of-the-art assessment of electric vehicles and hybrid vehicles

The Electric and Hybrid Vehicle Research, Development, and Demonstration Act of 1976 (PL 94-413) requires that data be developed to characterize the state of the art of vehicles powered by an electric motor and those propelled by a combination of an electric motor and an internal combustion engine or other power sources. Data obtained from controlled tests of a representative number of sample vehicles, from information supplied by manufacturers or contained in the literature, and from surveys of fleet operators of individual owners of electric vehicles is discussed. The results of track and dynamometer tests conducted by NASA on 22 electric, 2 hybrid, and 5 conventional vehicles, as well as on 5 spark-ignition-engine-powered vehicles, the conventional counterparts of 5 of the vehicles, are presented.

Source record↗
NASA NTRS2012

Investigations Using Laboratory Testbeds to Interpret Flight Instrument Datasets from Mars Robotic Missions

The Astromaterials Research and Exploration Science Directorate at the NASA Johnson Space Center (JSC) has laboratory instrumentation that mimic the capabilities of corresponding flight instruments to enable interpretation of datasets returned from Mars robotic missions. The lab instruments have been and continue to be applied to datasets for the Moessbauer Spectrometer (MB) on the Mars Exploration Rovers (MER), the Thermal & Evolved Gas Analyzer (TEGA) on the Mars Phoenix Scout, the CRISM instrument on the Mars Reconnaissance Orbiter Missions and will be applied to datasets for the Sample Analysis at Mars (SAM), Chemistry and Mineralogy (CheMin) and Chemistry & Camera (ChemCam) instruments onboard the Mars Science Laboratory (MSL). The laboratory instruments can analyze analog samples at costs that are substantially lower than engineering models of flight instruments, but their success to enable interpretation of flight data depends on how closely their capabilities mimic those of the flight instrument. The JSC lab MB instruments are equivalent to the MER instruments except without flight qualified components and no reference channel Co-57 source. Data from analog samples were critical for identification of Mg-Fe carbonate at Gusev crater. Fiber-optic VNIR spectrometers are used to obtain CRISM-like spectral data over the range 350-2500 nm, and data for Fephyllosilicates show irreversible behavior in the electronic transition region upon dessication. The MB and VNIR instruments can be operated within chambers where, for example, the absolute H2O concentration can be measured and controlled. Phoenix's TEGA consisted of a calorimeter coupled to a mass spectrometer (MS). The JSC laboratory testbed instrument consisted of a differential scanning calorimeter (DSC) coupled to a MS configured to operate under total pressure (12 mbar), heating rate (20 C/min), and purge gas composition (N2) analogous to the flight TEGA. TEGA detected CO2 release at both low (400-680 C) and high (725-820 C) temperature and an endothermic reaction in concert with the high temperature release. The high-temperature thermal decomposition is consistent with calcite, dolomite, or ankerite, (3-6 wt.%) or any combination of these phase based upon laboratory testbed experiments. Recent laboratory experiments suggest that the low temperature CO2 release was caused by a reaction between calcium carbonate and hydrated magnesium perchlorate; although, CO2 release by the oxidation of organic materials and Fe-/Mg-rich carbonates cannot be ruled out. MSL landed in Gale crater on August 5, 2012. Although numerous analog samples have been analyzed on the JSC laboratory testbeds, no SAM, CheMin, or ChemCam analyses have been acquired by MSL to date. The JSC SAM laboratory testbed consists of a thermal analyzer coupled with a MS configured to operate under total pressure (30 mbar), heating rate (35 C/min), and purge gas composition (He) analogous to the flight SAM. The CheMin and ChemCam laboratory testbeds were developed and built by inXitu, Inc. and Los Alamos National Laboratory, respectively, to acquire datasets relevant to the MSL CheMin and ChemCam flight instruments.

Ming, D. W.↗
NASA NTRSDate not supplied

Phenomena Portal: Large- Scale Visual Exploration of Atmospheric Phenomena

The Earth science community is experiencing a high influx of remote sensing data due to recent advancements in sensor technology. This enables the community to extend their research on a larger scale than ever before. Unfortunately, traditional data processing techniques do not scale well to these new, high volume data sources. State-of-the-art machine learning (ML) pipelines have been proven to overcome these burdens in various other fields but are underexploited within the physical sciences community. Moreover, ML is reliant on labeled data, which is currently sparsely available, owing to the fact that ML adoption is still in the early stages within the Earth and atmospheric science communities. To address these issues, we developed the Phenomena Portal, a visual exploration tool that uses ML to detect various atmospheric phenomena on a global scale. This allows the Earth and atmospheric science communities to view trends of occurrences of phenomena, identify potential relationships between them, and analyze spatiotemporal patterns over time. These detections can also serve as initial labeled data for ML research pertaining to the respective phenomena. The tool also incorporates feedback from subject matter experts to further improve the model detection accuracy, thereby facilitating human-in-the-loop. This presentation will provide an overview of the ML model development and cloud deployment. We also discuss the capabilities of the user interface for displaying the detections.

Muthukumaran Ramasubramanian↗
NASA NTRS2014

Exploring NASA OMI Level 2 Data With Visualization

Satellite data products are important for a wide variety of applications that can bring far-reaching benefits to the science community and the broader society. These benefits can best be achieved if the satellite data are well utilized and interpreted, such as model inputs from satellite, or extreme events (such as volcano eruptions, dust storms,... etc.). Unfortunately, this is not always the case, despite the abundance and relative maturity of numerous satellite data products provided by NASA and other organizations. Such obstacles may be avoided by allowing users to visualize satellite data as "images", with accurate pixel-level (Level-2) information, including pixel coverage area delineation and science team recommended quality screening for individual geophysical parameters. We present a prototype service from the Goddard Earth Sciences Data and Information Services Center (GES DISC) supporting Aura OMI Level-2 Data with GIS-like capabilities. Functionality includes selecting data sources (e.g., multiple parameters under the same scene, like NO2 and SO2, or the same parameter with different aggregation methods, like NO2 in OMNO2G and OMNO2D products), user-defined area-of-interest and temporal extents, zooming, panning, overlaying, sliding, and data subsetting, reformatting, and reprojection. The system will allow any user-defined portal interface (front-end) to connect to our backend server with OGC standard-compliant Web Mapping Service (WMS) and Web Coverage Service (WCS) calls. This back-end service should greatly enhance its expandability to integrate additional outside data/map sources.

Aura↗
NASA NTRS2016

Example of Occupational Surveillance in a Telemedicine Setting: Application of Epidemiologic Methods at NASA Johnson Space Center

In 2010, NASA implemented Lifetime Surveillance of Astronaut Health, a formal occupational surveillance program for the U.S. astronaut corps. Because of the nature of the space environment, space medicine presents unique challenges and opportunities for epidemiologists. One such example is the use of telemedicine while crewmembers are in flight, where the primary source of information about crew health is verbal communication between physicians and their crewmembers. Due to restricted medical capabilities, the available health information is primarily crewmember report of signs and symptoms, rather than diagnoses. As epidemiologists at NASA, Johnson Space Center, we have shifted our paradigm from tracking diagnoses based on traditional terrestrial clinical practice to one in which we also incorporate reported symptomology as potential antecedents of disease. In this presentation we describe how characterization of reported signs and symptoms can be used to establish incidence rates for inflight immunologic events. We describe interdisciplinary data sources of information that are used in combination with medical information to analyze the data. We also delineate criteria for symptom classification inclusion. Finally, we present incidence tables and graphs to illustrate the final outcomes. Using signs and symptoms reported via telemedicine, the epidemiologists provide summary evidence regarding incidence of potential inflight medical conditions. These results inform our NASA physicians and scientists, and support evaluation of the occupational health risks associated with spaceflight.

Babiak-Vazquez, Adriana↗
NASA NTRS1990

Word timing recovery in direct detection optical PPM communication systems with avalanche photodiodes using a phase lock loop

A technique for word timing recovery in a direct-detection optical PPM communication system is described. It tracks on back-to-back pulse pairs in the received random PPM data sequences with the use of a phase locked loop. The experimental system consisted of an 833-nm AlGaAs laser diode transmitter and a silicon avalanche photodiode photodetector, and it used Q = 4 PPM signaling at source data rate 25 Mb/s. The mathematical model developed to describe system performance is shown to be in good agreement with the experimental measurements. Use of this recovered PPM word clock with a slot clock recovery system caused no measurable penalty in receiver sensitivity. The completely self-synchronized receiver was capable of acquiring and maintaining both slot and word synchronizations for input optical signal levels as low as 20 average detected photons per information bit. The receiver achieved a bit error probability of 10 to the -6th at less than 60 average detected photons per information bit.

Sun, Xiaoli↗
NASA NTRS2018

Validation of the Nasa Integrated Medical Model: a Space Flight Medical Risk Prediction Tool

The Human Research Program funded the development of the Integrated Medical Model (IMM) to quantify the medical component of overall mission risk. The IMM uses Monte Carlo simulation methodology, incorporating space flight and ground medical data, to estimate the probability of mission medical outcomes and resource utilization. To determine the credibility of IMM output, the IMM project team completed two validation studies that compared IMM predicted output to observed medical events from a selection of Shuttle Transportation System (STS) and International Space Station (ISS) missions. The validation study results showed that the IMM underpredicted the occurrence of ~10% of the modeled medical conditions for the STS missions and overpredicted ~20% of the modeled medical conditions for the ISS missions. These findings imply that the strength of IMM predictions to inform decisions depends on simulated mission specifications including length. This discrepancy could result from medical recording differences between ISS and STS that possibly influence observed incidence rates, IMM combining all "mission type" data as constant occurrence rate or fixed proportion across both mission types, misspecification of symptoms to conditions, and gaps in the literature informing the model. Some of these issues will be alleviated by updating the IMM source data through incorporation of the observed validation data.

medical equipment↗
NASA NTRS2018

Validation of the NASA Integrated Medical Model: a Space Flight Medical Risk Prediction Tool

The Human Research Program funded the development of the Integrated Medical Model (IMM) to quantify the medical component of overall mission risk. The IMM uses Monte Carlo simulation methodology, incorporating space flight and ground medical data, to estimate the probability of mission medical outcomes and resource utilization. To determine the credibility of IMM output, the IMM project team completed two validation studies that compared IMM predicted output to observed medical events from a selection of Shuttle Transportation System (STS) and International Space Station (ISS) missions. The validation study results showed that the IMM underpredicted the occurrence of ~10% of the modeled medical conditions for the STS missions and overpredicted ~20% of the modeled medical conditions for the ISS missions. These findings imply that the strength of IMM predictions to inform decisions depends on simulated mission specifications including length. This discrepancy could result from medical recording differences between ISS and STS that possibly influence observed incidence rates, IMM combining all "mission type" data as constant occurrence rate or fixed proportion across both mission types, misspecification of symptoms to conditions, and gaps in the literature informing the model. Some of these issues will be alleviated by updating the IMM source data through incorporation of the observed validation data.

risk assessment↗
NASA NTRS2019

Vicarious Calibration of GOCI for the SeaDAS Ocean Color Retrieval

A key on-orbit calibration step for satellite remote sensing of ocean color is the vicarious calibration. This establishes the final gains for each spectral band on the sensor that minimize bias in the retrieved ocean color signal. The vicarious calibration is specific to the instrument and the atmospheric correction algorithm. The vicarious calibration gains for the Geostationary Ocean Color Imager (GOCI) are presented here, which were derived to optimize the performance ofNASA's standard atmospheric correction algorithm as implemented in the l2gen code and distributed through the SeaDAS open-source software package. Following NASA's protocols, the near-infrared(NIR) bands were calibrated first, and the visible bands were then calibrated relative to this fixed NIR calibration. The gain for the 745-nm NIR band was derived using a fixed aerosol model, which waschosen based on the Angstrom Coefficients derived from MODIS onAqua (MODISA). For the vicarious gains of the visible bands, twosources for the target water-leaving radiances were tested: matchupsfrom MODISA and climatological data from SeaWiFS. A validation analysis using AERONET-OC data shows an improvement in sensor performance when compared with results using the current vicarious gains and results using no vicarious calibration. Good agreement was found in vicarious gains derived using both concurrent MODISA and climatological SeaWiFS as vicarious calibration data sources. These results support the use of a concurrent sensor for the vicarious calibration when in situ data are not available and demonstrate that using climatology from a well-calibrated sensor like SeaWiFSfor the vicarious calibration is a valid alternative when it is not possible to use a concurrent sensor or in situ data. We recommend using the gains derived from concurrent GOCI matchups with MODISA for GOCI processing in SeaDAS/l2gen.

Concha, Javier↗
NASA NTRS1985

Role of solar flare index in long term modulation of cosmic ray intensity

Recently, the importance of the occurrence of solar flares in the long-term modulation of cosmic ray intensity has been re-emphasized. For this purpose, the data of solar flares have been used from various publications, such as Solar Geophysical Data books, U.A.G. reports and Quarterly Bulletin Of Solar Activity. Research very clearly reveals that even the periodic changes in the solar flare observations, obtained from the four different data sources, for the same interval, differ significantly from one another; this is evidenced even on an average basis. Hence, in any study using solar flares, the importance of selecting a single compilation of the solar-flare data for the entire period of investigation is stressed.

Pandey, P. K.↗