Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Common data models”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Challenges and Solutions for Real-Time Phasor Modeling of Large-scale Distribution Network with High PV Penetration

The conversion process of a practical large-scale feeder data from a quasi-static time series (OpenDSS) model into a real-time phasor model (ePHASORSIM in Opal-RT) is discussed in the paper. The process is implemented using an open source Python software. Previous reported implementations for the conversion process lead to several errors when applied to a larger-scale system such as the one considered here. Hence in this work, we describe the common issues in this conversion and propose a customized solution to enhance the efficiency of the conversion and reduce the complexity in the process. A quantitative validation of the enhanced conversion process is presented in this work using an actual high PV penetration feeder model that consists of 2230 buses, and using actual load and PV profile data. After a detailed analysis, this customized conversion software will be made available as an open source tool and is expected to be helpful for researchers who want to pursue a similar conversion. Solutions to various observed issues such as identifying the lines due to islanded network, representation of full impedance model of transformer/lines as sequential models, complexity in the representation of single phase buses/lines as three phase buses/lines to make it compatible with the simulator platform are discussed. Comparison of power flow and time series simulation results obtained from both OpenDSS and ePHASORsim models show very low errors, validating the accuracy of the proposed conversion process.

14 SOLAR ENERGY↗
DOE OSTI2020

Reexamining supercritical gas adsorption theories in nano-porous shales under geological conditions

Adsorption is an important phenomenon in surface chemistry, especially for nano-porous shales. In the shale gas-in-place, adsorbed gas could contribute up to 85%. However, adsorption is hard to quantitatively characterize due to different adsorption mechanisms, patterns, surfaces, and pore sizes. Moreover, key thermodynamic parameters, such as the enthalpy of adsorption, are challenging to determine due to uncertainties in adsorbed gas densities used in constructing absolute isotherms. In this paper, we revisit the Brunauer, Emmett, and Teller (BET) model, analytically simplify Ono-Kondo (OK) models for subsurface shales, and compare commonly used mono- and multilayer adsorption models (e.g., Langmuir, supercritical Dubinin-Radushkevich (SDR), supercritical BET (SBET), and simplified OK (OKs) models) with recently proposed pressure-dependent adsorption densities to develop a practical and reliable methodology that can be used in the supercritical state, typical for subsurface black shale conditions.Three independent data sets were used for nitrogen and methane adsorption isotherms at different temperatures. Furthermore, we demonstrate that adsorption predicted by the SDR model is comparable or lower than that predicted by the SBET model, but higher than the amounts predicted by Langmuir and OK models. The nitrogen BET method tends to underestimate the accessible SSA for methane. Measurement of isosteric heat of adsorption is suggested instead of the experimental fitting method, due to the significant difference between the calculated results by two commonly used methods. Experimental fitting and simulation methods are also briefly reviewed to guide future research on shale gas adsorption.

58 GEOSCIENCES↗
DOE OSTI2024

Neural Network Prediction of Strong Lensing Systems with Domain Adaptation and Uncertainty Quantification

Modeling strong gravitational lenses is computationally expensive for the complex data from modern and next-generation cosmic surveys. Deep learning has emerged as a promising approach for finding lenses and predicting lensing parameters, such as the Einstein radius. Mean-variance Estimators (MVEs) are a common approach for obtaining aleatoric (data) uncertainties from a neural network prediction. However, neural networks have not been demonstrated to perform well on out-of-domain target data successfully - e.g., when trained on simulated data and applied to real, observational data. In this work, we perform the first study of the efficacy of MVEs in combination with unsupervised domain adaptation (UDA) on strong lensing data. The source domain data is noiseless, and the target domain data has noise mimicking modern cosmology surveys. We find that adding UDA to MVE increases the accuracy on the target data by a factor of about two over an MVE model without UDA. Including UDA also permits much more well-calibrated aleatoric uncertainty predictions. Advancements in this approach may enable future applications of MVE models to real observational data.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2025

Finding Real Uncertainties From Physical Simulations

Modeling strong gravitational lenses is computationally expensive for the complex data from modern and next-generation cosmic surveys. Deep learning has emerged as a promising approach for finding lenses and predicting lensing parameters, such as the Einstein radius. Mean-variance Estimators (MVEs) are a common approach for obtaining aleatoric (data) uncertainties from a neural network prediction. However, neural networks have not been demonstrated to perform well on out-of-domain target data successfully - e.g., when trained on simulated data and applied to real, observational data. In this work, we perform the first study of the efficacy of MVEs in combination with unsupervised domain adaptation (UDA) on strong lensing data. The source domain data is noiseless, and the target domain data has noise mimicking modern cosmology surveys. We find that adding UDA to MVE increases the accuracy on the target data by a factor of about two over an MVE model without UDA. Including UDA also permits much more well-calibrated aleatoric uncertainty predictions. Advancements in this approach may enable future applications of MVE models to real observational data.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Deep-learning-based canopy height model generation from sub-meter resolution panchromatic satellite imagery

Canopy height models (CHMs) with sufficient resolution to distinguish individual trees are useful for a variety of applications. However, standard techniques to acquire such data, such as airborne lidar surveying, are often prohibitively expensive. Deep learning techniques for generating CHMs from high-resolution imagery are an attractive option to reduce costs. To date, success with these methods has been demonstrated using multichannel aerial photography and specialized satellite data products derived from multiple sensors, neither of which is commonly available at temporal resolutions finer than one year. Here we demonstrate a method to generate sub-meter resolution CHMs in three forests in California using a more abundant data source: sub-meter resolution, panchromatic satellite imagery from a single sensor. We show that phenology and species composition play important roles in model transferability; when trained using imagery from a single conifer forest in autumn, the model performs well on autumn imagery from a second conifer forest several hundred kilometers distant with no re-training. With modest additions to the training dataset, the same model generates minimally biased estimates of canopy height in both conifer and deciduous forests during multiple seasons. Because the model operates on satellite data with global coverage and a relatively short return interval, we propose its suitability to extrapolate tree-level canopy height data to remote regions and conduct high-temporal resolution monitoring of forest structure. We furthermore demonstrate the workflow’s applicability to fire modeling by conducting simulations in forests populated by trees measured using both this approach and airborne lidar surveying. We find minimal differences in fire behavior relative to a baseline case in which only statistical distributions of tree height and crown area are known. This result underscores the value of forest structural information derived from our workflow for improving the fidelity of wildland fire simulations, among other ecological applications.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Real-Time Health Monitoring for Gas Turbine Components Using Online Learning and High-Dimensional Data (Final Report)

Capital-intensive turbomachinery, such as gas turbines and combined cycle plants, are constantly being monitored for performance anomalies, faults, and physical degradation. Although these power-generating assets are equipped with hundreds of sensors, existing monitoring tools can only handle moderate-sized data. As a result, only a handful of aggregate metrics are used to monitor machine health. At the same time, developing advanced tools suitable for large datasets have been restricted by the lack of appropriate data. The objective of this proposal was to demonstrate a Big Data analytics framework for fault detection and diagnosis in gas turbine applications. We develop a predictive analytics framework methodology guided by these experimental data, industrial data from our collaborators, and physics-based models with engineering domain knowledge. Our analytics framework consists of four key components: (1) a data curation process that addresses data storage, data quality assessments, and integrity checks, (2) a feature engineering component that utilizes statistical methods and transformation algorithms guided by physics-based models to extract high-fidelity fault features that can be leveraged for fault detection and classifying fault severities, (3) a Machine Learning-based fault detection and diagnostics algorithms for detecting operational and hardware faults in the combustion and the turbines section. We utilize two industry-class gas turbine component test rigs to generate first of its kind data for critical gas turbine faults with varying severity levels. Advanced gas turbine test facilities will be interrogated using state-of-the-art instrumentation techniques to build fault signatures and data trends for key combustor and turbine faults. Data generated from a combustor test rig (Georgia Tech) and a turbine test rig (Penn State) during both normal operation and with seeded faults serve as the basis for the Big Data sets. The test conditions in the two test facilities include common, critical events that occur in the operation. Utilizing the combustor test rig, we examine two common combustor faults: lean blowout and centerbody degradation. For the turbine section we develop analytic models for monitoring cooling faults in the gas turbine.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2026

Inverse design of hypoeutectoid pearlite steel microstructures using a deep learning and genetic algorithm optimization framework

Goal-oriented microstructure design in metallic materials is a challenging task due to complex structure-property relationships. Traditional experimental and computational approaches are time-intensive and economically inefficient, limiting their applicability for large-scale design space exploration. Here, in this work, we propose an end-to-end framework that integrates deep learning models with genetic optimization to design microstructures with targeted mechanical properties. Deep learning models enable accurate forward design, while their integration with genetic optimization enables efficient inverse design within a few hours, compared to days or weeks using conventional finite element simulations. The framework combines experimental characterization and finite element modeling to analyze the influence of microstructural features on the mechanical behavior of hypoeutectoid steels. Data from both experiments and simulations are used to train the deep learning models. To demonstrate its effectiveness, we apply the framework to 0.63% carbon steel with proeutectoid ferrite and pearlite phases, commonly used in industrial applications. In this study, 2D microstructures were used for modeling, selected primarily for computational efficiency and to establish proof of concept. The framework successfully optimizes microstructures for targeted yield strength, ultimate strength, and stress concentration factors while significantly reducing computational time. Beyond hypoeutectoid steels, this scalable framework can be extended to other material systems and integrated with additive manufacturing, offering an efficient approach for accelerating microstructure design for specific engineering applications.

ConvLSTM↗
DOE OSTI2020

Relationships between Vehicle Pricing and Features: Data Driven Analysis of the Chinese Vehicle Market

A full-scale understanding of the dynamics of the Chinese vehicle market can benefit stakeholders with respect to rational decision-making and effective long-term investment. This study attempts to discover the common vehicle pricing patterns in the Chinese market by quantifying statistical correlations among critical vehicle features from intrinsic powertrain systems to extrinsic market positioning. The data samples involve almost all passenger vehicle models sold in 2013 to 2019. After comparing multiple statistical methodologies, a log-transformation variant of the multinomial linear regression model was found to be the best one, and the goodness of fit shows that this model can offer stable estimates, which were validated using 2019 market data. The insights achieved are: (1) The price and major performance features of SUVs/crossovers are similar to those of sedans; (2) If all other explicit features remain the same, the price of a Japanese midsize sedan is 62% higher than that of a Chinese midsize sedan, and European midsize vehicles have the highest prices overall. (3) The incremental price of fuel consumption varies by vehicle class and fuel economy. For example, from 30 to 50 MPG, the vehicle price increases by $119 for a Chinese brand sedan vehicle, by $69 for a Chinese brand SUV.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2025

Fixed-Site KAZR b1 Data Processing: Corrections, Calibrations, and Processing Report

The U.S. Department of Energy’s (DOE) Atmospheric Radiation Measurement (ARM) User Facility operates three fixed-site observatories: Eastern North Atlantic (ENA), North Slope of Alaska (NSA), and Southern Great Plains (SGP). Each fixed site has a wide variety of atmospheric instrumentation that has been collecting data for at least 10 years (NSA and SGP over 25 years). Each site is unique because it represents a different climate state. The environment at ENA is characterized by marine stratocumulus clouds and one of the key scientific areas of focus is the interaction of these clouds with aerosols. At NSA the focus is on arctic climate and cloud and radiative processes in a high-latitude environment. SGP represents a mid-latitude, mid-continent climate that experiences environmental cycles on diurnal and seasonal time scales. The ARM observatories are all meant to improve understanding of atmospheric processes that can then be better incorporated into weather and climate models. Another common thread between the fixed sites is the focus on cloud processes. Each site is equipped with at least one radar that provides continuous remote-sensing observations of clouds and precipitation. This report details the analysis of a1-level radar data at the fixed sites and the process for generating b1-level data. While b1-level data have been produced for ARM campaigns at the mobile facilities, this is the first analysis led by ARM radar mentors to correct data at the fixed sites. In particular, we focus on calibrations and corrections of the Ka-band ARM Zenith Radars (KAZRs) at ENA, NSA, and SGP. Ongoing and future work will involve corrections applied to other fixed-site radars.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

A change language for ontologies and knowledge graphs

Ontologies and knowledge graphs (KGs) are general-purpose computable representations of some domain, such as human anatomy, and are frequently a crucial part of modern information systems. Most of these structures change over time, incorporating new knowledge or information that was previously missing. Managing these changes is a challenge, both in terms of communicating changes to users and providing mechanisms to make it easier for multiple stakeholders to contribute. To fill that need, we have created KGCL, the Knowledge Graph Change Language (https://github.com/INCATools/kgcl), a standard data model for describing changes to KGs and ontologies at a high level, and an accompanying human-readable Controlled Natural Language (CNL). This language serves two purposes: a curator can use it to request desired changes, and it can also be used to describe changes that have already happened, corresponding to the concepts of “apply patch” and “diff” commonly used for managing changes in text documents and computer programs. Another key feature of KGCL is that descriptions are at a high enough level to be useful and understood by a variety of stakeholders—e.g. ontology edits can be specified by commands like “add synonym ‘arm’ to ‘forelimb’” or “move ‘Parkinson disease’ under ‘neurodegenerative disease’.” We have also built a suite of tools for managing ontology changes. These include an automated agent that integrates with and monitors GitHub ontology repositories and applies any requested changes and a new component in the BioPortal ontology resource that allows users to make change requests directly from within the BioPortal user interface. Overall, the KGCL data model, its CNL, and associated tooling allow for easier management and processing of changes associated with the development of ontologies and KGs.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗
DOE OSTI2020

The Influence of Aqueous Dispersivity on Transport of Radiological Material at LANL MDA G - 20450

Aqueous dispersivity is a phenomenon by which a solute moving in groundwater mixes with water that does not contain the solute and becomes diluted. Solutes take paths of varying lengths through pore networks or experience slower velocities due to interactions with pore walls. Aqueous dispersivity leads to breakthrough curves with earlier arrival than expected in purely advective systems and persistent 'tails,' or late-arriving, dilute concentrations of the solute. Dispersivity can be longitudinal (in the direction of flow) or transverse (orthogonal to flow). LANL has disposed of radioactive material at Material Disposal Area (MDA) G since the late 1950's. Most of the disposed materials at MDA G are low-level waste (LLW), but other types of radioactive wastes are disposed or stored at the site. For example, there is a collection of remote-handled transuranic waste (RH-TRU) waste in 33 shafts, which were intended to be stored retrievably. Aqueous-phase radionuclides included in models of contaminant transport at MDA G are subject to dispersive processes in porous media of the vadose zone and saturated zone. To model dispersivity at MDA G probabilistically, we created site-specific distributions of aqueous dispersivity. First, we performed a comprehensive review of peer-reviewed publications, reports from other performance assessments of MDA G, and documentation from sites that were considered similar based on expert opinion, such as Yucca Mountain. Data were included from a wide range of sources, so that distributions developed based on the data reflect the current state of knowledge in properties of the subsurface environment. Data were grouped based on value type (e.g., determined via experiment or used in a different model), rock type, zone type (saturated or unsaturated), and site, and were weighted in the distributions according to their relevance to the site and zone type. We combined Monte Carlo simulation and bootstrapping techniques to produce approximate distributions of mean aqueous dispersivity. Distributions of dispersivity for saturated and unsaturated zone transport are differentiated by data weight and the length scales over which transport occurs. We find that underestimating or disregarding transverse dispersivity may lead to overstating simulated well capture in the saturated zone at MDA G. Neglecting transverse dispersivity is a common assumption due in part to use of one-dimensional transport models that do not consider solute spreading orthogonal to flow. Also, we find that variability in longitudinal dispersivity is associated with substantial travel time alterations in the MDA G unsaturated zone and in simulated contaminant breakthrough times at a downstream observation plane in the MDA G saturated zone. Finally, at large scales (>1000 m), a linear trend between the dispersivity coefficient and length over which transport occurs may overestimate the dispersivity coefficient. Future modeling work with application to solute spreading could include interacting advective and diffusive zones in the highly fractured basalt below MDA G. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2022

Viscoelastic necking dynamics between attractive microgels

Hypothesis: Microgels can deform and interpenetrate and display colloid/polymer duality. The effective interaction of microgels in the collapsed state is governed by the interplay of polymer–solvent interfacial tension and bulk elasticity. A connecting neck is shown to mediate microgel interaction, but its temporal evolution has not been addressed. Here we hypothesize that the necking dynamics of attractive microgels exhibits liquid-like or solid-like behavior over different time and length scales. Experiments: We simulate the merging and pinching of attractive microgels with different crosslinking densities in explicit solvent using dissipative particle dynamics. The temporal coalescence dynamics of microgels is investigated and compared with simple liquid and polymeric droplets. We model the neck growth on long time scales using Maxwell model of polymer relaxation and compare the theoretical prediction with simulation data. The mechanical strength of the neck is characterized systematically via simulated pinch-off of microgels by steered molecular dynamics. Findings: We evidence a crossover in the coalescence dynamics reflecting the viscoelastic signature of microgels. In contrast to the common knowledge that viscoelastic materials respond elastically on short time scales, the early expansion of the microgel neck exhibits a linear behavior, similar to the viscous coalescence of liquid droplets. However, the late regime with arrested dynamics resembles sintering of solid particles. Through an analytical model relating microgel dynamics to neck growth, we show that the long-term behavior is governed by stress relaxation of the polymers in the neck region and predict an exponential decay in the rate of growth, which agrees favorably with the simulation. Different from coalescence, the thread thinning in microgel breakup primarily highlights its polymeric characteristics.

42 ENGINEERING↗
DOE OSTI2023

Semi-Automatic Geographic Information System Framework for Creating Photo-Realistic Digital Twin Cities to Support Autonomous Driving Research

Digital twin cities are frequently used in vehicle and traffic simulations to render realistic on-road driving scenarios under various traffic and environmental conditions. These digital twins provide a high-fidelity replica of the physical world (e.g., buildings, roads, infrastructures, traffic) to create three-dimensional (3D) virtual-physical environments to support various emerging vehicle and transportation technologies such as connected and automated vehicles. These virtual environments provide a cost-effective digital proving ground to evaluate, validate, and test emerging technologies that include control algorithms, localization, perception, and sensors. Replicating a real-world traffic scenario in a digital twin using a traditional 3D modeling approach is a time-consuming and labor-intensive effort. Here this paper presents a semi-automated spatial framework to construct realistic 3D digital twin cities to support autonomous driving research using readily available geographic information system (GIS) data and 3D prefabricated (prefab) models. We start with a comprehensive review of geospatial data sources of essential digital entities required in a 3D digital twin city and present an integrated GIS-3D modeling pipeline using customized QGIS/GDAL and Blender scripting in Python. The pipeline outputs are realistic 3D digital twin cities compatible with common vehicle simulation software, such as CARLA and IPG CarMaker. The paper closes with a showcase to demonstrate the quality and usability of a digital twin city created to replicate the Shallowford Road corridor in Chattanooga in both Unity and Unreal engine-based virtual environment. The generated digital twin city can be applied to a hardware-in-the-loop simulation environment with an actual testing vehicle to facilitate autonomous driving research.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2025

wa-hls4ml and lui-gnn: A benchmark and GNN-based surrogate model for hls4ml resource and latency estimation

As machine learning (ML) increasingly serves as a tool for addressing real-time challenges in scientific applications, the development of advanced tooling has significantly reduced the time required to iterate on various designs. These advancements have solved major obstacles, but also exposed new challenges. For example, processes that were not previously considered bottlenecks, such as model synthesis, are now becoming limiting factors in the rapid iteration of designs. To reduce these emerging constraints, multiple efforts are being launched toward designing an ML-based surrogate model that estimates resource usage of synthesized accelerator architectures. This model would reduce the design iteration time, especially when designing within a set of given hardware constraints. This approach shows considerable potential, but as it stands, the effort is early and would benefit from coordination and standardization to assist future work as it emerges. We introduce wa-hls4ml, a benchmark for ML accelerator resource and latency estimation, and its corresponding initial dataset of more than 100,000 fully connected neural networks, all synthesized using hls4ml and targeting Xilinx FPGAs. In addition to the resource utilization and latency data provided, the dataset includes generated artifacts and log files for many of the synthesized neural networks, in order to support future research in ML-based code generation. The benchmark evaluates the performance of resource and latency predictors against several common ML model architectures, primarily originating from scientific domains, as exemplar models, as well as the average performance across a subset of the dataset. We measure the performance of a given predictor model through multiple metrics, including $R^2$ score and SMAPE on regression tasks, as well as inference time to further characterize the estimator under test. Additionally, we introduce the latency/utilization inference graph neural network (lui-gnn), a surrogate model that uses a graph neural network to represent input architectures in the form of a directed graph. This graph representation allows for a diverse set of model architectures to all be effectively handled by a surrogate model. We present the architecture and performance of the model, as evaluated by the new proposed benchmark, including SMAPE, $R^2$ score, and inference times, and find that lui-gnn generally predicts latency and utilization for the 75\% quantile within several percent of the synthesized resources on the synthetic test dataset, indicating that this approach of estimating resource and latency via a surrogate models has promise and warrants further research.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

Impact of Varying Dark Energy on Future Large-Scale Structure Studies

The cosmos withholds multiple mysteries such as dark forms of matter and energy that are yet beyond human comprehension. In the standard cosmological model, $\Lambda$CDM, the cosmological constant $\Lambda$ is thought to be responsible for the late accelerated expansion of the Universe. However, recent results from the Dark Energy Spectroscopic Instrument (DESI) suggest the possibility of evolving dark energy, which warrants further exploration. Future surveys such as the Rubin Observatory Legacy Survey of Space and Time (LSST) will map the large-scale structure (LSS) with unprecedented precision, giving us valuable statistical information about the cosmos. The goal of this research is to investigate the potential impact of an evolving dark energy scenario on cosmological parameters constrained by LSS probes, as will be mapped by the LSST. For this, we examine the power spectra of lens galaxies, source galaxies, and cross-power spectra between lens galaxies and source galaxies. The combination of these statistics is commonly referred to as '3 $\times$ 2 points'. For this investigation, we created a set of simulations resembling LSST data and used them to perform cosmological parameter inference in two scenarios: one in which the simulated data is based on the fiducial model and another on evolving dark energy. We then examined the degeneracy between the cosmological parameters and checked for potential shifts in the parametric space when the data contains dynamical dark energy but the modeling assumes $\Lambda$CDM. Our findings indicate that mismodeling the dark energy equation of state can significantly impact parameter inference, particularly affecting the total matter density, $\Omega_m$, and the growth of structures, as represented by the $S_8$ parameter. These results highlight the importance of further exploring extensions of the $\Lambda$CDM model in future LSS studies.

Yaman Acharya, A.↗
DOE OSTI2021

Windowed multipole representation of R -matrix cross sections

Nuclear cross sections are basic inputs to any nuclear computation. Campaigns of experiments are fitted with the parametric R-matrix model of quantum nuclear interactions, and the resulting cross sections are documented—both pointwise and as resonance parameters (with uncertainties)—in standard evaluated nuclear data libraries (ENDF, JEFF, BROND, JENDL, CENDL, TENDL): these constitute our common knowledge of fundamental low-energy nuclear cross sections. In the past decade, a collaborative effort has been deployed to establish a new nuclear cross-section library format—the Windowed Multipole Library—with the goal of considerably reducing the computational cost of cross-section calculations in nuclear transport simulations. This work lays the theoretical foundations underpinning these efforts. From general R-matrix scattering theory, we derive the windowed multipole representation of nuclear cross sections. Though physically and mathematically equivalent to R-matrix cross sections, the windowed multipole representation is particularly well suited for subsequent temperature treatment of angle-integrated cross sections, in particular Doppler broadening, which is the averaging of cross sections over the thermal motion of the target atoms. Doppler broadening is of critical importance in neutron transport applications, as it ensures the stability of many nuclear reactors (negative thermal reactivity). Yet, Doppler broadening of nuclear cross sections has been a considerable bottleneck for nuclear transport computations, often requiring memory-costly pretabulations. We show that the windowed multipole representation can perform accurate Doppler broadening analytically (up to the first reaction threshold), from which we derive cross-section temperature derivatives to any order—all computable on the fly (without precalculations stored in memory). Furthermore, we here establish a way of converting the R-matrix resonance parameters uncertainty (covariance matrices) into windowed multipole parameters uncertainty. We show that generating stochastic nuclear cross sections by sampling from the resulting windowed multipole covariance matrix can reproduce the cross-section uncertainty in the original nuclear data file. The windowed multipole representation is therefore a novel nuclear physics formalism able to generate Doppler broadened stochastic nuclear cross sections on the fly, unlocking breakthrough computational gains for nuclear computations. Through this foundational paper, we hope to make the windowed multipole representation accessible, reproducible, and usable for the nuclear physics community, as well as provide the theoretical basis for future research on expanding its capabilities.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

A data-driven perspective on the colours of metal–organic frameworks

Colour is at the core of chemistry and has been fascinating humans since ancient times. It is also a key descriptor of optoelectronic properties of materials and is often used to assess the success of a synthesis. However, predicting the colour of a material based on its structure is challenging. In this work, we leverage subjective and categorical human assignments of colours to build a model that can predict the colour of compounds on a continuous scale. In the process of developing the model, we also uncover inadequacies in current reporting mechanisms. For example, we show that the majority of colour assignments are subject to perceptive spread that would not comply with common printing standards. To remedy this, we suggest and implement an alternative way of reporting colour—and chemical data in general. All data is captured in an objective, and standardised, form in an electronic lab notebook and subsequently automatically exported to a repository in open formats, from where it can be interactively explored by other researchers. We envision this to be key for a data-driven approach to chemical research.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Continuum shock mixture models for Ni+Al multilayers: Individual layers and bulk equations of state

Continuum shock mixture models are reviewed and applied to determine the equations of state for five different compositions of Ni x Al y ⁠, as well as bulk Ni+Al reactive multilayers, by combining the fundamental property data for elemental nickel and aluminum. From the literature, we down-select and evaluate two analytical models for the mixture Hugoniot, i.e., the well-known method of kinetic energy averaging (KEA) and a recent model proposed by Jordan and Baer [J. Appl. Phys. 111, 083516 (2012)]. Fundamentally, the former method assumes pressure equilibrium, whereas the latter assumes a common particle velocity and mixture sound speed from compressible two-phase cavitating flows. Additionally, we construct thermodynamically complete equations of state by fitting Einstein oscillator series models for the specific heat at constant volume. Finally, the solid solution approximation is invoked for intermetallic compositions, which are not strictly physical mixtures. Overall, the KEA model provides a better fit to the available Ni x Al y and Ni+Al multilayer shock compression data; however, there are combinations of material properties where the performance of these two models is thought to be reversed. Moreover, the results of this work include the first analytical solution of Jordan–Baer that does not require numerical root finding, as well as proposed modifications to the Einstein oscillator series to incorporate some effects of local pressure–temperature equilibrium and reaction–diffusion. Future work is planned that will use these equations of state in mesoscale simulations to study shock-induced reaction in Ni+Al multilayers, and the intended application is illustrated with a brief 2D hydrocode example.

36 MATERIALS SCIENCE↗