Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “COPRECIPITATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

A co-precipitation preparation, crystal structure and photoluminescent properties of Er5%:Gd{sub 2}O{sub 3} nanorods

An inexpensive preparation method is being reported for obtaining erbium doped gadolinium oxide (Er5%:Gd{sub 2}O{sub 3}) nanoscale rods. The elongated nanoscale systems, as-formed through a co-precipitation process, are characterized by using X-ray powder diffraction (XRD) patterns, scanning electron microscopy (SEM) with energy dispersive X-ray (EDX) mapping, Ultra Violet-visible (UV-vis.) absorption spectroscopy and photoluminescence (PL) spectroscopy. In addition, the Williamson–Hall (W–H) plot is also performed to distinguish the effect of crystalline size-induced broadening and strain-induced broadening at full-width at half-maximum (FWHM) of the XRD profile. The XRD patterns of as-formed and calcined products show that the phase confirmation. As revealed from the SEM micrographs, the morphology of the products show that the rod-like nanoparticles. The EDX micrographs show that the presence of elements in our samples. The band gap values in calcined samples are found to be in the range of 3.569 eV. Upon 230 nm excitation on calcined samples, three broad emission peaks are observed from PL studies. The possible mechanism for the formation of Er5%:Gd{sub 2}O{sub 3} nanorods is briefly discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Thermoluminescence response of K{sub 2}Ca{sub 2}(SO{sub 4}){sub 3} nanophosphor Co-doped with Eu and Ce for gamma ray dosimetry

K{sub 2}Ca{sub 2}(SO{sub 4}){sub 3} nanophosphors co-doped with Eu and Ce were synthesized by the chemical co-precipitation method. These samples were further annealed at 700 °C structural reformation. The structural and morphological characteristics were studied using XRD and TEM techniques. The particle size calculated from XRD spectra was around 35 nm. The as synthesized sample shows cubic structure annealed at 700 °C. The as synthesized and annealed sample of K{sub 2}Ca{sub 2}(SO{sub 4}){sub 3}: EuCe were irradiated with Co{sup 60} gamma rays for the doses from 2Gy to 1kGy. The TL characteristic sample of co-doped were studied for the dosimetric application by gamma radiation. The TL spectrum of annealed sample has single peaked at 160 °C. The Eu doped sample has a high TL sensitivity than Ce doped sample. But after co-doping with Eu and Ce, TL intensity observed to be decreased. The decrees in TL peak intensity of the phosphor on co-doping of Eu and Ce gives an insight into the emission mechanism of the phosphor which involves energy transfer from Eu to Ce. The TL response of all the samples were found to be linear for the dose from 2 Gy to 1 KGy. Therefore, K{sub 2}Ca{sub 2}(SO{sub 4}){sub 3}: EuCe nanophosphor can be used for the measurement of high dose of gamma radiation.

61 RADIATION PROTECTION AND DOSIMETRY↗

Synthesis and characterization of CaF{sub 2}:Dy nanophosphor for dosimetric application

In this work, nanoparticles (NPs) of dysprosium doped calcium fluoride (CaF{sub 2}:Dy) 1 mol % has been prepared using simple chemical co-precipitation method and its thermoluminescence (TL) dosimetric properties were studied. The synthesized nanoparticle sample was characterized by X-ray diffraction (XRD) and the particle size of face centered cubic phase NPs was found around 30 nm. The shape, morphology and size were also observed by scanning electron microscopy (SEM). From gamma irradiated CaF{sub 2}:Dy TL curves, it was observed that the total areas of all the glow peak intensities are dramatically changed with increase in annealing temperature. Further, TL glow curve of the CaF{sub 2}:Dy at 183 °C annealed at 400 °C, showed very sharp linear response in the dose range from 1 Gy to 750 Gy. This linear response of CaF{sub 2}:Dy nanophosphor as a function of gamma dose is very useful from radiation dosimetric point of view.

61 RADIATION PROTECTION AND DOSIMETRY↗

Substitutional effect of Ni on different properties of ZnO nanocrystals

Samples of pure and Ni doped ZnO nanocrystals with nominal compositions (x = 0.00, 0.03, 0.05) were successfully synthesized by Co-precipitation method. These samples were characterized by X-ray diffraction (XRD), Scanning Electron Microscopy (SEM) and Fourier Transform Infrared Spectrometer (FTIR). From XRD patterns it is confirmed that all samples have hexagonal (wurtzite) structure without formation any secondary phases. Atomic packing fraction (APF) and c/a ratio were calculated using XRD data. The lattice parameters of samples decrease with increasing Ni concentration. The average crystalline size was calculated by Scherrer’s formula and it is found that the average crystalline size is in the range 43-56 nm. The SEM micrographs of samples show the agglomeration of nanocrystals. Chemical species of the samples were detected using FTIR spectra. It confirms the formation of ZnO with the stretching vibrational mode around at 512 cm{sup −1}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Tuning of structural and magnetic properties of Mn-doped CoFe{sub 2}O{sub 4} nanoparticles

In the present manuscript, Mn{sub x}Co{sub 1-x}Fe{sub 2}O{sub 4} (x=0.0, 0.2, 0.4, 0.6, 0.8 and 1.0) nanoparticles have been synthesized with co-precipitation method by annealing at 900 °C and studied the structural and magnetic properties. X ray diffraction pattern reveals the formation of single phase cubic spinel structure with the space group Fd-3m. An impurity peak of α-Fe{sub 2}O{sub 3} has been observed in the XRD patterns of samples with Mn composition, x ≥ 0.4. However, this impurity phase of α-Fe{sub 2}O{sub 3} is not observed in the MnFe{sub 2}O{sub 4} sample synthesized by annealing at 500 °C. FESEM results indicate the formation of nano-sized particles. Magnetic measurements show ferrimagnetic interaction in Mn{sub x}Co{sub 1-x}Fe{sub 2}O{sub 4} (x≥0) nanoparticles at room temperature. However, MnFe{sub 2}O{sub 4} sample synthesized by annealing at 500 °C shows superparamagnetic behavior. We have fitted the M-H curve of MnFe{sub 2}O{sub 4} synthesized by annealing at 500 °C with modified Langvenin function to confirm superparamagnetism. The correlation between the structural and observed magnetic properties of as synthesized samples nanoparticles will be described and discussed in this paper.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Existence of Fe{sup 4+} ions in Co{sub 2.25}Fe{sub 0.75}O{sub 4} spinel ferrite confirmed from SXRD and XANES spectroscopy

The Co{sub 2.25}Fe{sub 0.75}O{sub 4} ferrite composition has been prepared by chemical co-precipitation route. The as-prepared sample after annealing at 900°C in air formed single phase cubic spinel structure. Synchrotron X-ray diffraction and X-ray absorption near edge structure (XANES) measurements were used to study charge states of the cations in octahedral and tetrahedral sites of the cubic spinel structure. Raman spectra indicated normal cubic spinel structure. XANES data suggested the existence of Fe{sup 4+} ions in the spinel structure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Size dependence of magnetorheological properties of cobalt ferrite ferrofluid

Cobalt Ferrite nanoparticles were synthesized using co-precipitation method at reaction temperatures of 40°C and 80°C. X-Ray diffraction studies confirm cubic phase formation. The average crystallite sizes were found to be ∼30nm and ∼48nm for 40°C sample and 80°C sample respectively. Magnetic properties measured using vibrating sample magnetometer show higher coercivety and magnetization for sample prepared at 80°C. Magnetorheological properties of CoFe2O4 ferrofluids were measured and studied.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Anomalous electrical relaxation and polaron conduction in nano-crystalline Mn{sub 0.5}Zn{sub 0.5}Fe{sub 2}O{sub 4}

Nano-crystalline Mn{sub 0.5}Zn{sub 0.5}Fe{sub 2}O{sub 4} was synthesized by chemical co-precipitation method and characterized with X-ray diffraction. Ac electrical impedance data are taken for the frequency range of 1Hz to 1MHz for various temperatures from 303K to 483K. The ac electrical conduction deviates from the Debye type relaxation which indicates polaron type conduction. In the present study unique anomalous relaxation function in time and frequency domain is used to investigate deviation from the Debye relaxation. The physical basis of anomalous or non-Debye process is explained in terms of change in Debye dipole μ{sub D}=ρr{sub D} of charge ρ into gρ due to the molecular charge interaction and defect disorder. This interaction shifts the Debye relaxation rate τ to a slow relaxation rate τ{sup g}. The fraction 0<g<1 is emerged as the exponent on frequency and time domain function of non-Debye relaxation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Study of multi-functionality of lanthanum ferrite (LaFeO{sub 3})

In the present work, multifunctional behaviors of LaFeO{sub 3} (LFO) are investigated by studying its dielectric and photocatalytic properties, respectively. LFO is synthesized by microwave-assisted co-precipitation route. Orthorhombic structure is confirmed by X-ray diffraction (XRD) and data is well fitted using Rietveld refinement by Full-Prof suite. Frequency and Temperature dependence dielectric behavior are systematically studied. The dielectric constant of LFO was found to be 2500 – 3000 with dissipation factor less than 5%. Photodegradation of toxic dye (Methylene Blue) using as-prepared LFO is also investigated. UV-visible absorption spectra are used to study the photodegradation behaviour. Photodegradation of methylene blue (MB) taken from textile industries by LFO are reported. The colossal value of dielectric constant of LFO exhibits high potential to use as room temperature capacitive component for device miniaturization in microelectronics as well as photodegradation ability shows good photocatalyst.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Application of microscopy technology in thermo-catalytic methane decomposition to hydrogen

Hydrogen production from the direct thermo-catalytic decomposition of methane is a promising alternative for clean fuel production because it produces pure hydrogen without any CO{sub x} emissions. However, thermal decomposition of methane can hardly be of any practical and empirical interest in the industry unless highly efficient and effective catalysts, in terms of both specific activity and operational lifetime have been developed. In this work, bimetallic Ni-Pd on gamma alumina support have been developed for methane cracking process by using co-precipitation and incipient wetness impregnation method. The calcined catalysts were characterized to determine their morphologies and physico-chemical properties by using Brunauer-Emmett-Teller method, Field Emission Scanning Electron Microscopy, Energy-dispersive X-ray spectroscopy and Thermogravimetric Analysis. The results suggested that that the catalyst which is prepared by the co-precipitation method exhibits homogeneous morphology, higher surface area, have uniform nickel and palladium dispersion and higher thermal stability as compared to the catalyst which is prepared by wet impregnation method. This characteristics are significant to avoid deactivation of the catalysts due to sintering and carbon deposition during methane cracking process.

36 MATERIALS SCIENCE↗

Surfactant assisted synthesis of aluminum doped SrFe{sub 10}Al{sub 2}O{sub 19} hexagonal ferrite

M-type aluminum doped SrFe{sub 10}Al{sub 2}O{sub 19} were synthesized via co-precipitation method using cetyltrimethyl ammonium bromide (CTAB) as a surfactant. The effects of CTAB content (x = 0, 1, 3, and 9 wt. %) on the formation, structure, morphology, magnetic, and dielectric properties of the SrFe{sub 10}Al{sub 2}O{sub 19} nanoparticles were investigated. X-ray diffraction results show elimination of α-Fe{sub 2}O{sub 3} phase from samples prepared using CTAB. Morphological changes including grain and crystallite size was noticed with the increase in the CTAB content. With the increase in CTAB, powder particles grew in hexagonal plates. A linear increase in saturation magnetization, Ms, with CTAB content was observed from 56.5 emu/g at 0% CTAB to 66.4 emu/g at 9% CTAB. This is a net increase of 17.5% in Ms. The coercivity (Hc ∼ 5700 Oe) of sample reached maximum at 1% CTAB and reduced with further CTAB content reaching to a minimum value of 4488 Oe at 9% CTAB. A slight increase in Curie temperature (735 K) was also observed for samples synthesized using CTAB as compared to that of sample prepared in the absence of CTAB (729 K). Samples synthesized with CTAB show higher dielectric constants as compared to samples prepared without CTAB, while dielectric constant for all samples show decrease in value with the increase in frequency. These results imply that CTAB may act as a crystallization master, controlling the nucleation and growth of SrFe{sub 10}Al{sub 2}O{sub 19} crystal. The study delineates the scope of improving magnetic properties of ferrites without substitution of metal ions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Determination of transition metal ion distribution in cubic spinel Co{sub 1.5}Fe{sub 1.5}O{sub 4} using anomalous x-ray diffraction

We report anomalous x-ray diffraction studies on Co ferrite with composition Co{sub 1.5}Fe{sub 1.5}O{sub 4} to obtain the distribution of transition metal ions in tetrahedral and octahedral sites. We synthesize spinel oxide (Co{sub 1.5}Fe{sub 1.5}O{sub 4}) through co-precipitation and subsequent annealing route. The imaginary part (absorption) of the energy dependent anomalous form factor is measured and the real part is calculated theoretically through Kramers–Krönig transformation to analyze anomalous x-ray diffraction peak intensities. Fe and Co K-edge x-ray absorption near edge structure (XANES) spectra are used to estimate charge states of transition metals. Our analysis, within experimental errors, suggests 44% of the tetrahedral sites contain Co in +2 oxidation state and the rest 56% sites contain Fe in +2 and +3 oxidation states. Similarly, 47% of the octahedral sites contain Fe in +3 oxidation states, whereas, the rest of the sites contain Co in +2 and +3 oxidation states. While a distinct pre-edge feature in the Fe K-edge XANES is observed, Co pre-edge remains featureless. Implications of these results to magnetism are briefly discussed.

36 MATERIALS SCIENCE↗

In-vitro study of copper doped SiO{sub 2}-CaO-P{sub 2}O{sub 5} system for bioactivity and antimicrobial properties

Samples of the xCuO-(45-x)CaO-10P{sub 2}O{sub 5}-45SiO{sub 2} system (x varies from 0 to 4 mole%) have been synthesized for application as biomaterials to slow or inhibit the growth of living organisms (fungi and other pathogenic microorganisms) by the combination of sol-gel and co-precipitation processes. Prepared samples have been characterized by X-Ray Diffraction, Fourier Transform Infra-Red and Field Emission Scanning Electron Microscopy techniques before and after immersion in simulated body fluid. Antimicrobial activity of samples has been investigated against Staphylococcus aureus. Releasing of Cu{sup 2+}and other ions in the simulated body fluid has been determined by Atomic Absorption Spectroscopy to ensure the use of prepared material as biomaterial with good antibacterial properties.

36 MATERIALS SCIENCE↗

Synthesis and characterization of Fe{sub 3}O{sub 4}: Porous carbon nanocomposites for biosensor application

Fe{sub 3}O{sub 4}:Porous carbon (Fe{sub 3}O{sub 4}:PC) nano-magnetic composites were prepared by using different weight fractions of acid treated PC by the chemical co-precipitation route and annealed at 573 K, 773 K and 973 K temperatures in inert N{sub 2} gas atmosphere for 2 hrs to obtain desired stoichiometry of nanocomposites. The structural, morphological and magnetic properties of these composites were characterized by powder XRD, TEM, EPR and VSM analytical techniques. The crystallinity of the composites, g-value and spin concentration increases with increasing annealing temperature. TEM images confirmed the formation of nanosized ferrite nanoprticles whose size increases from 23 nm to 54 nm on increasing annealing temperature. Porous carbon increases porosity, coercivity and reduces saturation magnetization of these prepared nanocomposites.

36 MATERIALS SCIENCE↗

Synthesis and up-conversion luminescence of Er{sup 3+} and Y b{sup 3+} codoped nanocrystalline tetra- (KLaP{sub 4}O{sub 12}) and pentaphosphates (LaP{sub 5}O{sub 14})

The up-converting nanocrystals of KLa{sub 0.95}Er{sub 0.05}Y b{sub x}P{sub 4}O{sub 12} and La{sub 0.95−x}Er{sub 0.05}Y b{sub x}P{sub 5}O{sub 14} were prepared using co-precipitation method. The spectroscopic properties of these materials were investigated in a function of Y b{sup 3+} concentration. The up-conversion emission, power dependence of emission intensities, and the luminescence decay times were investigated. It was found that the green to red and {sup 2}H{sub 11/2} → {sup 4}I{sub 15/2} to {sup 4}S{sub 3/2} → {sup 4}I{sub 15/2} emission intensity ratio were strongly affected by the Y b{sup 3+} concentration. Moreover, the order of up-conversion emission and threshold power rises up with Y b{sup 3+} concentration for {sup 4}S{sub 3/2} → {sup 4}I{sub 15/2} transition. The luminescence decay time of the {sup 4}S{sub 3/2} → {sup 4}I{sub 15/2} emission increases with Y b{sup 3+} concentration while the {sup 4}F{sub 9/2} → {sup 4}I{sub 15/2} emission is independent of dopant concentration. The influence of the Y b{sup 3+} concentration on the up-conversion emission intensities was discussed in terms of concentration dependent hetero looped photon avalanche process. A comparison of the up-conversion properties of KLa{sub 0.95}Er{sub 0.05}Y b{sub x}P{sub 4}O{sub 12} and La{sub 0.95−x}Er{sub 0.05}Y b{sub x}P{sub 5}O{sub 14} nanocrystals was presented.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Magnetic moment directions and distributions of cations in Cr (Co) substituted spinel ferrites Ni{sub 0.7}Fe{sub 2.3}O{sub 4}

Powder samples of the spinel ferrites M{sub x}Ni{sub 0.7−x}Fe{sub 2.3}O{sub 4} (M = Cr, Co and 0.0 ≤ x ≤ 0.3) and Cr{sub x}Ni{sub 0.7}Fe{sub 2.3−x}O{sub 4} (0.0 ≤ x ≤ 0.3) were synthesized using the chemical co-precipitation method. The XRD spectra confirmed that the samples had a single-phase cubic spinel structure. Magnetic measurements showed that the magnetic moments (μ{sub exp}) per formula both at 10 K and 300 K increased with Co substitution, while the values of μ{sub exp} decreased with Cr substitution. Applying the assumption that the magnetic moments of Cr{sup 2+} and Cr{sup 3+} lie antiparallel to those of the divalent and trivalent Fe, Co, and Ni cations in the same sublattice of spinel ferrites, these interesting behaviors could be easily interpreted. The cation distributions of the three series of samples were estimated successfully by fitting the dependences of μ{sub exp}, measured at 10 K, on the doping level x, using a quantum-mechanical potential barrier model earlier proposed by our group. The results obtained for the Cr cation distributions at the (A) and [B] sites are very close to those obtained elsewhere using neutron diffraction.

36 MATERIALS SCIENCE↗

Fast crystallization of amorphous Gd{sub 2}Zr{sub 2}O{sub 7} induced by thermally activated electron-beam irradiation

We investigate the ionization and displacement effects of an electron-beam (e-beam) on amorphous Gd{sub 2}Zr{sub 2}O{sub 7} synthesized by the co-precipitation and calcination methods. The as-received amorphous specimens were irradiated under electron beams at different energies (80 keV, 120 keV, and 2 MeV) and then characterized by X-ray diffraction and transmission electron microscopy. A metastable fluorite phase was observed in nanocrystalline Gd{sub 2}Zr{sub 2}O{sub 7} and is proposed to arise from the relatively lower surface and interface energy compared with the pyrochlore phase. Fast crystallization could be induced by 120 keV e-beam irradiation (beam current = 0.47 mA/cm{sup 2}). The crystallization occurred on the nanoscale upon ionization irradiation at 400 °C after a dose of less than 10{sup 17} electrons/cm{sup 2}. Under e-beam irradiation, the activation energy for the grain growth process was approximately 10 kJ/mol, but the activation energy was 135 kJ/mol by calcination in a furnace. The thermally activated ionization process was considered the fast crystallization mechanism.

36 MATERIALS SCIENCE↗

The influence of Ca-Mg-Al hydrotalcite synthesized from brine water on thermal and mechanical properties of HTlc-EVA composite

Ca-Mg-Al hydrotalcite-like compound (Ca-Mg-Al HTlc) was prepared by co-precipitation method using brine water that is well known as the desalination process waste water. The structure of Ca-Mg-Al HTlc was determined by X-Ray Diffraction (XRD) and Fourier Transform Infrared (FTIR) analysis. Ca-Mg-Al HTlc was studied as a non-halogenated filler in ethylene vinyl acetate (EVA) matrix. Composites with different filler concentrations were prepared to evaluate the influence of Ca-Mg-Al HTlc on thermal and mechanical properties of EVA.The presence of Ca-Mg-Al HTlc in the composite has been confirmed by FTIR analysis. Thermal properties of composites show significant reduction of degradation temperature as well as the loading of HTlc in EVA. However, the total enthalpies combustion of composites with 1% and 5% HTlc loadings higher compared to neat EVA. Further, mechanical properties were determined by tensile test. The result shows that tensile strength and elongation at break of composites decrease relatively by Ca-Mg-Al HTlc addition.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗