Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Biomass Program”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

TEA and LCA Assessments of H2 Production from Coal, Coal/Biomass, and Biomass

This presentation was made at the "Gasification Technology Status and Pathways for Net-Zero Carbon Economy Workshop" held on November 30, 2022. The presentation primarily focuses on TEA/LCA results that NETL has developed for coal gasification w/ & w/o CCS as well as net-zero greenhouse gas coal/biomass gasification. Full reporting of these cases is publicly available in the NETL report titled "Comparison of Commercial, State-of-the-Art, Fossil-Based Hydrogen Production Technologies," April 2022. Additionally, the presentation describes current NETL work in support of the U.S. Department of Energy (DOE) Office of Fossil Energy and Carbon Management (FECM) Gasification Program in the areas of TEA/LCA/Markets analysis of biomass/MSW/waste plastics gasification to achieve cost reductions for net-zero H2 production.

Lewis, Eric↗

Cobalt-modified molybdenum carbide as a selective catalyst for hydrodeoxygenation of furfural

The hydrodeoxygenation (HDO) reaction is crucial to the upgrading of biomass-derived furfural to produce a promising fuel additive, 2-methylfuran. In order to enhance the stability of the molybdenum carbide (Mo 2 C) catalyst, this work utilizes cobalt (Co) modification to tune the oxygen and furfural binding energies on Mo 2 C. Density functional theory (DFT) calculations of the adsorption configuration of furfural on Mo 2 C(0001) and cobalt-modified molybdenum carbide (Co/Mo 2 C(0001)) reveal that the C=O bond of furfural is elongated, facilitating the selective C=O scission to produce 2-methylfuran. The reduced oxygen and furfural binding energies on Co/Mo 2 C(0001) allow the facile removal of surface oxygen and furfural to improve the stability of the catalyst. Temperature-programmed desorption (TPD) experiments on model surfaces confirm the enhanced stability and overall HDO performance of Co/Mo 2 C/Mo(110). Based on the results from high-resolution electron energy loss spectroscopy (HREELS), 2-methylfuran-like intermediates are observed on both Mo 2 C/Mo(110) and Co/Mo 2 C/Mo(110). Parallel reactor evaluations over the corresponding powder catalysts further demonstrate the enhanced stability of Co/Mo 2 C over Mo 2 C at ambient pressure. Furthermore, this work illustrates the important roles of oxygen and furfural binding energies in the furfural HDO reaction on both model surfaces and powder catalysts, which in turn provides insights into designing selective and stable carbide-based catalysts for HDO reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Production of high oil, transgene free Camelina sativa plants through genome editing

The objective of this project was to develop a Camelina sativa feedstock with significantly increased seed yield and oil content to maximize oil yields per acre. Camelina is an oilseed crop with high potential as a bioenergy feedstock due to its high oil content, low inputs for cultivation, frost tolerance, and short growth cycle (80-110 days). To accelerate market entry, a next generation technology was used to develop GMO free plants to provide an expedited path through regulatory approval. This is anticipated to significantly decrease the time and thus the costs of commercialization of these lines. For this program current Camelina lines were considered to yield, on average, 1500 lbs of seed per acre and possess a seed oil content of 40%. The program had two oil production benchmarks: (1) increase production of seed to 2500 lbs/acre with seed containing 45% oil, and (2) increase production of seed to 3500 lbs/acre with seed containing 60% oil. Hitting the first benchmark would significantly expand the potential of Camelina as a crop and would provide the profitability necessary to incent farmers to grow Camelina, resulting in the production of renewable feedstock for the biobased energy and chemical industries. The second benchmark (3500 lbs seed/acre with 60% oil content) would have a huge impact on the availability of renewable Camelina oil for the biodiesel and aviation fuel markets. The accomplishments of this program demonstrated that genome editing of multiple targets in Camelina is technically feasible, despite the complexity of the Camelina genome. It also demonstrated that it is possible to increase seed yield while maintaining seed oil content using genome editing. Genome edited lines achieving up to a 40% increase in seed yield were demonstrated in greenhouse growth studies. In separate experiments, the program also achieved increases of up to 38% in the seed oil content of individual seeds. This increased seed oil content was, however, often accompanied by a decrease in seed yield. These observations demonstrate that carbon flow in Camelina can be significantly shifted to seed oil production but that additional research is necessary to concurrently increase/or maintain seed yield. Yield10 plans to continue to build on these results after the BETO program. During the course of this program, Yield10 also demonstrated that lines with single edits, as well as lines with multiple edits, generated using genome editing technology can be designated as non-regulated by USDA-APHIS through their “Am I Regulated?” process. Two separate “Am I Regulated?” letters were submitted to USDA-APHIS and edited Camelina lines described in the letters were deemed non-regulated by the agency demonstrating a reduced regulatory path. The technology developed in this program contributes to the overall understanding of seed oil biosynthesis in oilseed crops and how seed yield and seed oil content can be improved using genome editing techniques. The technology is thus also relevant to increasing seed and oil yield in related oilseed crops, such as canola.

09 BIOMASS FUELS↗

Catalytic Hot-Gas Filtration with a Supported Heteropolyacid Catalyst for Preconditioning Biomass Pyrolysis Vapors

During ex situ catalytic fast pyrolysis (CFP) of biomass, the separation of reactive char and alkali/alkaline particulates from biomass pyrolysis vapors by hot-gas filtration (HGF) leads to improved vapor stability and quality. HGF in tandem with chemical tailoring (e.g., partial deoxygenation) of the clean pyrolysis vapors, denoted as catalytic hot-gas filtration (CHGF), has the potential to further improve vapor composition by removing reactive oxygen moieties and protect downstream upgrading catalysts from fouling. Downstream upgrading refers to both vapor phase upgrading (e.g., ex situ CFP) and condensed phase upgrading (e.g., hydrotreating). Consequently, CHGF (as a single unit operation) was evaluated for preconditioning pyrolysis vapors for downstream upgrading processes. In order to understand the effective operating conditions that successfully filter and partially deoxygenate pyrolysis vapors, a titania-supported molybdenum heteropolyacid (Mo-HPA/TiO 2 ) catalyst was studied for use in CHGF. Here, pine pyrolysis vapors were generated in a small pilot-scale pyrolyzer and transferred to a CHGF unit via a continuous-flow slipstream. In the CHGF unit, the pyrolysis vapors were filtered and upgraded over a packed Mo-HPA/TiO 2 catalyst bed. Real-time monitoring and identification of the products formed were achieved by molecular beam mass spectrometry. The results showed that under a hydrogen-rich environment, the pine vapors were partially deoxygenated and alkylated over the Mo-HPA/TiO 2 catalyst. Reactivity studies revealed that an increase in hydrogen concentration and a reduction in weight-hourly space velocity enhanced deoxygenation and alkylation. Time-on-stream (TOS) studies showed stable product formation up to 1 h with little change in catalyst activity. Additionally, the liquid product was collected using a custom fractional condensation unit (built in-house) and analyzed by gas chromatography mass spectrometry to confirm that the product was partially deoxygenated and alkylated. The combination of CHGF and fractional condensation allowed for chemical and physical removal of both foulant and value-added compounds (e.g., phenols, alkylphenols, methoxyphenols, cyclopentenones) for additional enhancement of downstream upgrading processes. The pre- and postreaction catalysts were characterized using temperature-programmed desorption, N 2 physisorption, and elemental analysis with results indicating some catalyst coking. A hydrogen-based catalyst regeneration procedure restored the reacted catalyst activity to that of fresh Mo-HPA/TiO 2 .

09 BIOMASS FUELS↗

Understanding the Opportunities of Biofuels for Marine Shipping

This report examines the potential benefits, feasibility, and barriers to the use of biofuels in place of heavy fuel oil (HFO) and marine gas oil for marine vessels. More than 90% of world’s shipped goods travel by marine cargo vessels powered by internal combustion (diesel) engines using primarily low-cost residual HFO, which is high in sulfur content. Recognizing that marine shipping is the largest source of anthropogenic sulfur emissions and is a significant source of other pollutants including particulates, nitrogen oxides, and carbon dioxide (CO 2 ), the International Maritime Organization enacted regulations to lower the fuel sulfur content from 3.5 wt.% to 0.5 wt.% in 2020. These regulations require ship operators either to use higher-cost, low-sulfur HFO or to seek other alternatives for reducing sulfur emissions (i.e., scrubbers, natural gas, distillates, and/or biofuels). The near-term options for shipowners to comply with regulations include fueling with low-sulfur HFO or distillate fuels or installing emissions control systems. However, few refineries are equipped to produce low-sulfur HFO. Likewise, the current production rates of distillates do not allow the necessary expansion required to fuel the world fleet of shipping vessels (which consume around 330 million metric tons). This quantity is more than twice that used in the United States for cars and trucks. The other near-term option is to install emission control systems, which also requires a significant investment. All of these options significantly increase operational costs. Because of such costs, biofuels have become an attractive alternative since they are inherently low in sulfur and potentially also offer greenhouse gas benefits. Based on this preliminary assessment, replacing HFO in large marine vessels with minimally processed, heavy biofuels appears to have potential as a path to reduced emissions of sulfur, CO 2 , and criteria emissions. Realizing this opportunity will require deeper knowledge of (1) the combustion characteristics of biofuels in marine applications, (2) their compatibility for blending with conventional marine fuels (including HFO), (3) needs and costs for scaling up production and use, and (4) a systems assessment of their life cycle environmental impacts and costs. It is recommended that a research program investigating each of these aspects be undertaken to better assess the efficacy of biofuels for marine use.

09 BIOMASS FUELS↗

Using mid-infrared spectroscopy to estimate soil microbial properties at the continental scale

Understanding microbial community properties is critical to improving the predictions of biogeochemical processes for enhancing soil carbon sequestration. Here, in this observational study, mid-infrared (MIR) spectroscopy and partial least squares regression was used to predict soil microbial and chemical properties from diverse ecosystems across the continental USA. Random calibration and validation demonstrated the prediction potential for soil properties using MIR spectra, with the strongest predictions for microbial respiration, followed by microbial biomass carbon and nitrogen, ß-glucosidase activity, as well as soil chemical properties including organic carbon and total nitrogen. Microbial properties were mainly positively correlated to spectral regions associated with aliphatic C-H groups and C=O stretches of polysaccharides and negatively correlated to quartz and silicate-associated regions. We conclude that MIR spectroscopy can characterize soil microbial functions and be useful for the improvement of continental-scale soil carbon modeling and prediction programs.

59 BASIC BIOLOGICAL SCIENCES↗

Michigan: Michigan's Clean Energy Resources and Economy [Brochure]

By harnessing its abundant supply of conventional hydroelectric power, biomass, and wind, Michigan is well on its way to meeting its goal, set by the 2008 Clean Renewable and Efficient Energy Act, of generating 10% of retail electricity from renewable sources by 2015. Renewable biomass accounted for 39% of renewable energy credits certified in Michigan between 2009 and 2011, thanks in part to Michigan’s 19 million acres of forest land. Small hydroelectric plants, landfill gas, and municipal solid waste are all important sources of renewable electricity in Michigan—together accounting for 34% of renewable energy credits during the same time period. Michigan also has significant undeveloped wind energy potential. Michigan also requires electric providers to develop and fund “energy optimization” programs aimed at reducing electricity consumption. Michigan is one of the few states to count efficiency as an eligible clean energy resource, awarding “energy optimization credits” for successfully reducing energy consumption. Energy optimization credits can be substituted for renewable energy credits. As of December 2009, all utility customers in Michigan are eligible to participate in at least one energy-efficiency program offered through a local utility, and aggregate statewide funding for energy optimization programs has more than tripled from $\$$67 million in 2009 to $\$$208 million in 2011. Michigan is becoming a center for the domestic advanced battery industry. Companies all along the battery supply chain cluster in the state and draw from a talented pool of scientists, engineers, and other skilled workers with decades of experience in the auto industry. Michigan’s geographic position makes the state an attractive site for wind industry manufacturing; 2010 counted 31 wind technology manufacturing facilities in the state.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Montana BioDiesel Initiative

This initiative funding helped put Montana State University (MSU) in a position to help lead in the development of biodiesel production strategies. Recent shortages in electrical power and rising gasoline prices have focused much attention on the development of alternative energy sources that will end our dependence on fossil fuels. In addition, as the concern for environmental impact of utilizing fossil fuels increases, effective strategies must be implemented to reduce emissions or the increased regulations imposed on fossil fuel production will cause economic barriers for their use to continue to increase. Biodiesel has been repeatedly promoted as a more environmentally sound and renewable source of fuel and may prove to be a highly viable solution to provide, at the least, a proportion of our energy needs. Currently there are both practical and economic barriers to the implementation of alternative energy however the advent of these technologies is inevitable. Since many of the same strategies for the storage, transport, and utilization of biodiesel are common with that of fossil fuels, the practical barriers for biodiesel are comparatively minimal. Strategies were developed to harness the CO 2 as feedstock to support the growth of biodiesel producing algae. The initiative funding led to the successful funding of highly rated projects in competitive national grant programs in the National Science Foundation and the Department of Energy. This funding put MSU in a key position to develop technologies to utilize the CO 2 rich emissions produced in fossil fuel utilization and assembled world experts concerning the growth characteristics of photosynthetic microorganisms capable of producing biodiesel.

09 BIOMASS FUELS↗

4.2.1.31 Integrated Life Cycle Sustainability Analysis

This project provides the Department of Energy's Bioenergy Technologies Office (BETO) with strategic decision-support for the evaluation of its R&D portfolio by developing, validating, and applying a coherent methodology and consistent model framework to quantify the net effects of an expanding US bioeconomy. The framework fills an analysis gap previously identified by Peer Review and supports a related milestone in BETO's Multi-Year Program Plan. The framework was scoped with inputs from practitioners in academia, national laboratories, and federal agencies. The model is a top-down, economy-wide framework using a coherent methodology to compute environmental and socio-economic metrics. It is purposefully complementary to existing bottom-up, process-based techno-economic and life cycle assessment BETO tools and uses their data as inputs. Presently, the model covers several commercial and near-commercial biofuel routes and an emerging pathway for plastics upcycling. It covers temporal detail across four time-steps and is currently being expanded with a prospective modeling capability. The model has provided analyses for the Third Triennial Report to Congress (RtC3) on the environmental impacts of the Renewable Fuel Standard (RFS2), among others. As part of this project, NREL also provides scientific support to BETO in the International Energy Agency's Technology Collaboration Program on Bioenergy (IEA Bioenergy) Task 45 on Sustainability. Here, NREL evaluates and synthesizes activities that develop, compare, or apply metrics, methods, and tools to quantify sustainability effects of bioeconomy products. NREL also coordinates related national lab involvement and a BETO Working Group on Sustainable Land Management.

bioeconomy↗

A Regional Climate Change Assessment Program for North America

There are two main uncertainties in determining future climate: the trajectories of future emissions of greenhouse gases and aerosols, and the response of the global climate system to any given set of future emissions [Meehl et al., 2007]. These uncertainties normally are elucidated via application of global climate models, which provide information at relatively coarse spatial resolutions. Greater interest in, and concern about, the details of climate change at regional scales has provided the motivation for the application of regional climate models, which introduces additional uncertainty [Christensen et al., 2007a]. These uncertainties in fi ne- scale regional climate responses, in contrast to uncertainties of coarser spatial resolution global models in which regional models are nested, now have been documented in numerous contexts [Christensen et al., 2007a] and have been found to extend to uncertainties in climate impacts [Wood et al., 2004; Oleson et al., 2007]. While European research in future climate projections has moved forward systematically to examine combined uncertainties from global and regional models [Christensen et al., 2007b], North American climate programs have lagged behind. To fi ll this research gap, scientists developed the North American Regional Climate Change Assessment Program (-NARCCAP). The fundamental scientifi c motivation of this international program is to explore separate and combined uncertainties in regional projections of future climate change resulting from the use of multiple atmosphere- ocean general circulation models (AOGCMs) to drive multiple regional climate models (RCMs). An equally important, and related, motivation for this program is to provide the climate impacts and adaptation community with high- resolution regional climate change scenarios that can be used for studies of the societal impacts of climate change and possible adaptation strategies.

09 BIOMASS FUELS↗

Missouri Soybean Association Biodiesel Demonstration Project: Final Report

The Missouri Soybean Association (MSA) and the National Biodiesel Board (NBB) partnered together to implement the MSA Biodiesel Demonstration project under a United States Department of Energy (DOE) grant. The goal of this project was to provide decision makers and fleet managers with information that could lead to the increased use of domestically produced renewable fuels and could reduce the harmful impacts of school bus diesel exhaust on children. This project was initiated in September 2004 and completed in April 2011. The project carried out a broad range of activities organized under four areas: 1. Petroleum and related industry education program for fuel suppliers; 2. Fleet evaluation program using B20 with a Missouri school district; 3. Outreach and awareness campaign for school district fleet managers; and 4. Support of ongoing B20 Fleet Evaluation Team (FET) data collection efforts with existing school districts. Technical support to the biodiesel industry was also provided through NBB’s Troubleshooting Hotline. The hotline program was established in 2008 to troubleshoot fuel quality issues and help facilitate smooth implementation of the RFS and is described in greater detail under Milestone A.1 - Promote Instruction and Guidance on Best Practices. As a result of this project’s efforts, MSA and NBB were able to successfully reach out to and support a broad spectrum of biodiesel users in Missouri and New England. The MSA Biodiesel Demonstration was funded through a FY2004 Renewable Energy Resources Congressional earmark. The initial focus of this project was to test and evaluate biodiesel blends coupled with diesel oxidation catalysts as an emissions reduction technology for school bus fleets in the United States. The project was designed to verify emissions reductions using Environmental Protection Agency (EPA) protocols, then document – with school bus fleet experience – the viability of utilizing B20 blends. The fleet experience was expected to support ongoing industry efforts to collect existing data and to increase awareness and knowledge among school district fleet managers. However, three years into the project, the original intent of the engine verification was no longer deemed by equipment manufacturers to be of sufficient economic interest to enter into a partnership. In response, MSA requested a project extension and re-scope to eliminate the aftermarket equipment verification and replace it with a petroleum education program. The revised project maintained four task areas with the following modifications. The first component was directed at increasing national compliance with newly initiated state level fuel blend mandates through a distributor education program. Component two was modified to eliminate the verification element and, instead, document operational data from biodiesel use in a district school bus fleet. Components three and four were unchanged and maintained their purpose of expanding upon the existing knowledge base of biodiesel use in school bus fleets.

09 BIOMASS FUELS↗

Use of Lignin-Based Admixture as Water Reducer (WRA) for Tailoring the Rheological Properties of Mortars for 3D-Printing

Efforts towards decarbonizing construction materials and industrial processes related to cement and concrete can be aided via multifaceted approaches that target alternative admixtures as well as precision control of fabrication. Chemical admixtures for water reduction have played a crucial role in the development of advanced mortar and concrete mixtures. Newer biomass processing techniques developed for aviation fuel production from corn stover biomass produce a highly reactive lignin byproduct that is suitable for chemical modifications to mimic the properties of commonly used polycarboxylate ethers (PCEs) with a smaller carbon footprint. These lignin-based plasticizers developed at NREL can be used in place of petrochemical-derived superplasticizers to tailor the rheological properties of cement-based systems for applications such as additive manufacturing while reducing the carbon intensity of the concrete mix. Lignosulfonates derived from paper pulping were historically used as water reducers only to be displaced with the rise of PCEs. The present study examines the use of a NREL produced lignin-based water reducing admixture (WRA), in cement pastes and mortar mixtures for 3D-printing at small- (mm) scale. The experimental program consisted of different formulations of oxidized lignin-based WRAs added in variable dosages to cement pastes with a fixed water-to-cement ratio. The objective is to achieve an appropriate workability, extrudability and buildability of mortar mixtures to produce 3D-printed specimens. The rheological characterization was performed to compare the initial yield stress and viscosity of the different mixtures with lignin-based admixture with respect to conventional PCE superplasticizers. The rheological characterization shows that the proposed material act as an effective water-reducer in cement systems, affecting the yield stress, plastic viscosity, and structuration rate of the mixtures evaluated. On the other hand, the effect on early hydration process of the cement pastes containing lignin-based admixtures is comparable to conventional superplasticizers.

3D-printing↗

Reactivity of Hydrogen on and in Nanostructured Molybdenum Nitride: Crotonaldehyde Hydrogenation

Early-transition-metal nitrides, including γ-Mo 2 N, are active and selective for a variety of reactions, including the hydrogenation of organics (e.g., hydrodeoxygenation), CO (e.g., Fischer–Tropsch synthesis), and CO 2 . In addition to adsorbing hydrogen onto the surface, some of these materials can incorporate hydrogen into subsurface, interstitial sites. Research described in this paper examined, experimentally and computationally, the nature of hydrogen on and in γ-Mo 2 N, with a particular focus on characterizing the interactions of these hydrogens with crotonaldehyde. Hydrogen was added to γ-Mo 2 N via exposure to gaseous hydrogen at elevated temperatures, forming γ-Mo 2 N-H x , where 0.061< x < 0.082. Temperature-programmed desorption (TPD) experiments indicate that γ-Mo 2 N-H x has at least two distinct hydrogen binding sites and that these sites can be selectively populated. Inelastic neutron scattering and density functional theory calculations indicate the presence of surface nitrogen-bound (κ 1 -NH surf ), surface Mo-bound (κ 1 -MoHsurf), and interstitial Mo-bound (μ 6 -Mo 6 H sub ) hydrogens. Selectivities for the hydrogenation of crotonaldehyde, a model of species in biomass-derived liquids, correlated with the populations at these sites. Importantly, materials with high densities of interstitial, hydridic hydrogen were selective for C=O hydrogenation (i.e., formation of crotyl alcohol). Collectively the results provide mechanistic insights regarding the desorption and reactivity of hydrogen on and in γ-Mo 2 N. Hydrogen adsorption/desorption to γ-Mo 2 N is heterolytic; in particular, H 2 adds across a Mo–N bond. Because the surface Mo–H site is energetically unfavorable in comparison to the interstitial site, hydrogen migrates into interstitial sites once the surface NH sites are saturated. Crotonaldehyde adsorption facilitates migration of this interstitial hydrogen back to the surface, forming surface Mo–H that is selective for hydrogenation of the C=O bond. These insights will facilitate the design of γ-Mo 2 N and other early-transition-metal nitrides for catalytic applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Analysis of Strand-Specific RNA-Seq Data Using Machine Learning Reveals the Structures of Transcription Units in Clostridium thermocellum

The identification of transcription units (TUs) encoded in a bacterial genome is essential to elucidation of transcriptional regulation of the organism. To gain a detailed understanding of the dynamically composed TU structures, we have used four strand-specific RNA-seq (ssRNA-seq) datasets collected under two experimental conditions to derive the genomic TU organization of Clostridium thermocellum using a machine-learning approach. Our method accurately predicted the genomic boundaries of individual TUs based on two sets of parameters measuring the RNA-seq expression patterns across the genome: expression-level continuity and variance. A total of 2590 distinct TUs are predicted based on the four RNA-seq datasets. Moreover, among the predicted TUs, 44% have multiple genes. We assessed our prediction method on an independent set of RNA-seq data with longer reads. The evaluation confirmed the high quality of the predicted TUs. Functional enrichment analyses on a selected subset of the predicted TUs revealed interesting biology. To demonstrate the generality of the prediction method, we have also applied the method to RNA-seq data collected on Escherichia coli and achieved high prediction accuracies. The TU prediction program named SeqTU is publicly available athttps://code.google.com/p/seqtu/. We expect that the predicted TUs can serve as the baseline information for studying transcriptional and post-transcriptional regulation in C. thermocellum and other bacteria.

09 BIOMASS FUELS↗

Summary of Fast Pyrolysis and Upgrading GHG Analyses

The Energy Independence and Security Act (EISA) of 2007 established new renewable fuel categories and eligibility requirements (EPA 2010). A significant aspect of the National Renewable Fuel Standard 2 (RFS2) program is the requirement that the life cycle greenhouse gas (GHG) emissions of a qualifying renewable fuel be less than the life cycle GHG emissions of the 2005 baseline average gasoline or diesel fuel that it replaces. Four levels of reduction are required for the four renewable fuel standards. Table 1 lists these life cycle performance improvement thresholds. Table 1. Life Cycle GHG Thresholds Specified in EISA Fuel Type Percent Reduction from 2005 Baseline Renewable fuel 20% Advanced biofuel 50% Biomass-based diesel 50% Cellulosic biofuel 60% Notably, there is a specialized subset of advanced biofuels that are the cellulosic biofuels. The cellulosic biofuels are incentivized by the Cellulosic Biofuel Producer Tax Credit (26 USC 40) to stimulate market adoption of these fuels. EISA defines a cellulosic biofuel as follows (42 USC 7545(o)(1)(E)): The term “cellulosic biofuel” means renewable fuel derived from any cellulose, hemicellulose, or lignin that is derived from renewable biomass and that has lifecycle greenhouse gas emissions, as determined by the Administrator, that are at least 60 percent less than the baseline lifecycle greenhouse gas emissions. As indicated, the Environmental Protection Agency (EPA) has sole responsibility for conducting the life cycle analysis (LCA) and making the final determination of whether a given fuel qualifies under these biofuel definitions. However, there appears to be a need within the LCA community to discuss and eventually reach consensus on discerning a 50–59 % GHG reduction from a ≥ 60% GHG reduction for policy, market, and technology development. The level of specificity and agreement will require additional development of capabilities and time for the sustainability and analysis community, as illustrated by the rich dialogue and convergence around the energy content and GHG reduction of cellulosic ethanol (an example of these discussions can be found in Wang 2011). GHG analyses of fast pyrolysis technology routes are being developed and will require significant work to reach the levels of development and maturity of cellulosic ethanol models. This summary provides some of the first fast pyrolysis analyses and clarifies some of the reasons for differing results in an effort to begin the convergence on assumptions, discussion of quality of models, and harmonization.

Biofuel↗

Materials for Energy Conversion: Materials for Energy Conversion and Storage

The main objective of this collaborative research project was to identify a formulation and develop a catalyst for electro-oxidation of ethanol. Ethanol is one of the most mass-produced biofuels, and such catalysts will enable the development of Direct Ethanol Fuel Cell technology and through it, will interconnect fuel cells with biofuels. Several catalysts for direct electrochemical oxidation of ethanol have been selected on the principles of rational desig from the knowledge build in studying aqueous oxidation of ethanol. The program involved fundamental study of ethanol oxidation in liquid media, and particularly in alakine solutions. The lessons learned from the heterogeneous catalysis of ethanol thermal oxidation have been applied to the design of an electrocatalyst for direct ethanol fuel cells. The successful chemical compositions are based on PdZn and NiZn allows. The studies reveled the role of the transition metal oxide phase as a co-catalyst and the role of the active support material. To complete the set of materials for ethanol fuel cell, this program also invested n the development of ctalysts for oxygen reduction that are selective against alcohol oxidation. Non-platinum ctalysts based on pyrolyzed macrocycles or similar composites have been studied. This program included also the development of stuctured supports as an integral part of the catalyst development. A new family of materials has been designed based on mesoporous silica templating with synthetic carbon resulting in hierarchicaly porous structure. Structure-to-property relationship of catalysis and catalysts has been the center of this program. This have been engaged in both surface and bulk level and pursued with the tools avialble at the academic institutions and at LANSCE at LANL. The structural studies have been built in interaction with a computational effort on the basis of DFT approach to materials structure and reactivity.

08 HYDROGEN↗

Waste-to-Energy Technical Assistance for Local Governments [Slides]

The Bioenergy Technologies Office (BETO) and the National Renewable Energy Laboratory (NREL) launched an organic Waste-to-Energy Technical Assistance Program for local governments. Organic waste streams, such as food waste and wastewater sludge, represent significant environmental, economic, and social sustainability challenges for municipalities. BETO has funded analyses assessing these waste streams and various aspects of their management, such as existing uses and costs of disposal. Given that these waste streams require local solutions, this technical assistance program provides municipalities with the most relevant data for their decision-making. BETO will fund up to 40 hours of subject matter assistance to municipalities topics. This presentation was made during an informational webinar for the DOE Bioenergy Technologies Office. The webinar recording is posted https://www.youtube.com/watch?v=QHVvpDw2uQc.

09 BIOMASS FUELS↗