Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Best”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

Forestry applications project/timber resource. Sam Houston National forest inventory and development of a survey planning model

The Forestry Applications Project has been directed towards solving the problem of meeting informational needs of the resource managers utilizing remote sensing data sources including satellite data, conventional aerial photography, and direct measurement on the ground in such combinations as needed to best achieve these goals. It is recognized that sampling plays an important role in generating relevant information for managing large geographic populations. The central problem, therefore, is to define the kind and amount of sampling and the place of remote sensing data sources in that sampling system to do the best possible job of meeting the manager's informational needs.

Colwell, R. N.↗

Estimated probability density functions for the times between flashes in the storms of 12 September 1975, 26 August 1975, and 13 July 1976

A report is given to supplement the progress report of June 17, 1977. In that progress report gamma, lognormal, and Rayleigh probability density functions were fitted to the times between lightning flashes in the storms of 9/12/75, 8/26/75, and 7/13/76 by the maximum likelihood method. The goodness of fit is checked by the Kolmogoroff-Smirnoff test. Plots of the estimated densities along with normalized histograms are included to provide a visual check on the goodness of fit. The lognormal densities are the most peaked and have the highest tails. This results in the best fit to the normalized histogram in most cases. The Rayleigh densities have too broad and rounded peaks to give good fits. In addition, they have the lowest tails. The gamma densities fall inbetween and give the best fit in a few cases.

Tretter, S. A.↗

Wideband 1.064 micrometer detector evaluation

Several types of communications detectors for use in a 400 Mbps 1.064 micrometer laser communication system were evaluated and characterized. The communication system Bit Error Rate (BER) performance was measured, and test results for the best detector of each type are summarized. The complete BER curves are presented. The 400 Mbps 1.064 micrometer communication system receiver test bed is described. The best performance levels which can be achieved by focusing the signal to diffraction limited spots on the photosensitive area are cited.

Green, S. I.↗

Evaluation of battery models for prediction of electric vehicle range

Three analytical models for predicting electric vehicle battery output and the corresponding electric vehicle range for various driving cycles were evaluated. The models were used to predict output and range, and then compared with experimentally determined values determined by laboratory tests on batteries using discharge cycles identical to those encountered by an actual electric vehicle while on SAE cycles. Results indicate that the modified Hoxie model gave the best predictions with an accuracy of about 97 to 98% in the best cases and 86% in the worst case. A computer program was written to perform the lengthy iterative calculations required. The program and hardware used to automatically discharge the battery are described.

Frank, H. A.↗

Development of low cost, high reliability sealing techniques for hybrid microcircuit packages, phase 2

Adhesives were evaluated to determine if they qualify for application to hybrid microcircuit packages. The effort consisted of the following: (1) seal gold-plated Kovar packages with selective adhesives and determine seal integrity after exposure to temperature humidity environments; (2) seal both gold-plated Kovar and ceramic packages with the four best adhesives identified in (1) and determine seal integrity after exposure to MIL-STD-883A test environments; and (3) subject the best adhesive identified in (2) to a 60 C/98% RH environment and determine susceptibility to moisture permeation. Test results are provided.

Perkins, K. L.↗

Spectral evolution of a long X-ray burst

Results are reported for spectroscopic observations of an X-ray burstlike event that had a duration of 100 sec and a peak count range 1.5 times that of the Crab Nebula. The best position determined is 356.4 deg galactic longitude, 2.3 deg galactic latitude. It is shown that the spectrum of the source changed as the event evolved, being very soft during the 20-sec peak of the burst, quickly hardening during the decay, and again softening as the decay proceeded. The spectra are fit best by a blackbody model with kT of 0.87 to 2.33 keV, and it is noted that a weak flux was detected some time after the burst and was well fitted by a 10-keV thermal bremsstrahlung spectrum with an indication of iron line emission. A source size is obtained which suggests a neutron star or a black hole of stellar mass.

Swank, J. H.↗

Some new control theoretic models for human operator display monitoring

Control theoretic techniques are applied to develop two new models for predicting human operator performance when monitoring an automatically controlled system. In one case it is assumed that the human monitors the instruments in order to rapidly detect failures. The second approach assumes that the instruments are sampled to best reconstruct the system status information. The relation of these models to existing prediction schemes, e.g., equal attention and the Sender's (1964) model is explored. It is concluded that a combination of failure detection and status estimation models offers the best potential for human operator application.

Kleinman, D. L.↗

K/Ar dating of lunar soils. II

An attempt is made to identify those K/Ar techniques which extract the most reliable chronological information from lunar soils and to define the situations in which the best data are obtainable. Results are presented for determinations of the exposure and K/Ar ages of five lunar soil samples, which were performed by applying correlation techniques for a two-component argon structure to stepwise-heated and neutron-irradiated aliquots of grain-sized separates. It is found that ages deduced from Ar-40/surface-correlated Ar-36 vs K-40/surface-correlated Ar-36 and analogous plots of data from grain-sized separates appear to be the best available K/Ar ages of submature to mature lunar soils, that ages deduced from Ar-40 vs Ar-36 and analogous plots which assume a uniform K content can be significantly in error, and that stepwise-heating (Ar-40)-(Ar-39) experiments yield useful information only for simple immature soils where the K-Ar systematics are dominated by a single component.

Alexander, E. C., Jr.↗

Solar wind, energetic particles, and coronal magnetic structure - The first year of solar cycle 20

Coronal magnetic field structure is investigated by using solar and interplanetary magnetic polarity measurements and by using observations of solar wind plasma and energetic particles during the first 8 months of 1965. When it is compared by using all data available during this period, interplanetary polarity (mapped back to the high corona by using observed solar wind velocities) correlates best with mid-latitude solar polarity. However, when it is compared at only those times when energetic particles were present in the interplanetary medium and again at times of fast solar wind, the best correlation is with equatorial solar polarity. From these results we infer that energetic particles and fast solar wind escape preferentially from equatorial coronal magnetic structures which are open, while the more usual equatorial structures at this time are closed.

Nolte, J. T.↗

Photometry of the Gallilean satellites

The dependence of the magnitudes and colors on both solar and orbital phase angles is derived from photometric observations of the Gallilean satellites. The rotational variations are best defined by the most recent observations; as a consequence of the complex albedo distributions on the satellites, the light curves cannot be represented by simple analytic expressions. The recent data also establish the mean magnitudes on the V photometric system to within + or - 0.02 magnitude and permit accurate geometric albedos to be derived. The dependence of magnitude on solar phase angle, and particularly at very small phase angles, is best shown by the extensive observations from 1926 and 1927. The determined rotational curves are used to reduce these data and express the phase effect in terms of a linear curve for phase angles greater than 6 deg and a quadratic curve for smaller angles. The phase dependence of these satellites is compared with that observed for other small bodies in the solar system; particularly interesting are the anomalously large phase coefficient and opposition effect of Io.

Morrison, D.↗

Static performance of vectoring/reversing non-axisymmetric nozzles

An experimental program sponsored by the Air Force Flight Dynamics Laboratory is currently in progress to determine the internal and installed performance characteristics of five different thrust vectoring/reversing non-axisymmetric nozzle concepts for tactical fighter aircraft applications. Internal performance characteristics for the five non-axisymmetric nozzles and an advanced technology axisymmetric baseline nozzle were determined in static tests conducted in January 1977 at the NASA-Langley Research Center. The non-axisymmetric nozzle models were tested at thrust deflection angles of up to 30 degrees from horizontal at throat areas associated with both dry and afterburning power. In addition, dry power reverse thrust geometries were tested for three of the concepts. The best designs demonstrated internal performance levels essentially equivalent to the baseline axisymmetric nozzle at unvectored conditions. The best designs also gave minimum performance losses due to vectoring, and reverse thrust levels up to 50% of maximum dry power forward thrust. The installed performance characteristics will be established based on wind tunnel testing to be conducted at Arnold Engineering Development Center in the fall of 1977.

Willard, C. M.↗

Gamma rays and the case for baryon symmetric big-bang cosmology

The baryon symmetric big-bang cosmologies offer an explanation of the present photon-baryon ratio in the universe, the best present explanation of the diffuse gamma-ray background spectrum in the 1 to 200 MeV range, and a mechanism for galaxy formation. In the context of an open universe model, the value of omega which best fits the present gamma-ray data is omega equals approx. 0.1 which does not conflict with upper limits on Comptonization distortion of the 3K background radiation. In regard to He production, evidence is discussed that nucleosynthesis of He may have taken place after the galaxies were formed.

Stecker, F. W.↗

An introduction to orbit dynamics and its application to satellite-based earth monitoring systems

The long term behavior of satellites is studied at a level of complexity suitable for the initial planning phases of earth monitoring missions. First-order perturbation theory is used to describe in detail the basic orbit dynamics of satellite motion around the earth and relative to the sun. Surface coverage capabilities of satellite orbits are examined. Several examples of simulated observation and monitoring missions are given to illustrate representative applications of the theory. The examples stress the need for devising ways of maximizing total mission output in order to make the best possible use of the resultant data base as input to those large-scale, long-term earth monitoring activities which can best justify the use of satellite systems.

Brooks, D. R.↗

SEAHT: A computer program for the use of intersecting arcs of altimeter data for sea surface height refinement

The SEAHT program is designed to process multiple passes of altimeter data with intersecting ground tracks, with the estimation of corrections for orbital errors to each pass such that the data has the best overall agreement at the crossover points. Orbit error for each pass is modeled as a polynomial in time, with optional orders of 0, 1, or 2. One or more passes may be constrained in the adjustment process, thus allowing passes with the best orbits to provide the overall level and orientation of the estimated sea surface heights. Intersections which disagree by more than an input edit level are not used in the error parameter estimation. In the program implementation, passes are grouped into South-North passes and North-South passes, with the North-South passes partitioned out for the estimation of orbit error parameters. Computer core utilization is thus dependent on the number of parameters estimated for the set of South-North arcs, but is independent on the number of North-South passes. Estimated corrections for each pass are applied to the data at its input data rate and an output tape is written which contains the corrected data.

Allen, C. P.↗

Results from the Apollo passive seismic experiment

Recent results from the Apollo Seismic Network suggest that primitive differentiation occurred in the outer shell of the moon to a depth of approximately 300 km and the central region of the moon is presently molten to a radius of between 200 and 300 km. If early melting to a depth of 300 to 400 km was a consequence of accretional energy, very short accretion times are required. It was shown that the best model for the zone of original differentiation is a crust 40 to 80 km thick, ranging in composition from anorthositic gabbro to gabbro, and overlying an ultramafic cumulate about 250 km thick. The best candidate for the molten core appears to be iron or iron sulphide. A new class of seismic signals recently were identified that may correspond to shallow moonquakes. These are rare, but much more energetic than the more numerous, deep moonquakes.

Latham, G.↗

Hydrogen film cooling of a small hydrogen-oxygen thrust chamber and its effect on erosion rates of various ablative materials

An experimental investigation was conducted to determine what arrangement of film-coolant-injection orifices should be used to decrease the erosion rates of small, high temperature, high pressure ablative thrust chambers without incurring a large penalty in combustion performance. All of the film cooling was supplied through holes in a ring between the outer row of injector elements and the chamber wall. The best arrangement, which had twice the number of holes as there were outer row injection elements, was also the simplest. The performance penalties, presented as a reduction in characteristic exhaust velocity efficiency, were 0.8 and 2.8 percentage points for the 10 and 20 percent cooling flows, respectively, The best film-coolant injector was then used to obtain erosion rates for 19 ablative materials. The throat erosion rate was reduced by a factor of 2.5 with a 10 percent coolant flow. Only the more expensive silica phenolic materials had low enough erosion rates to be considered for use in the nozzle throat. However, some of the cheaper materials might qualify for use in other areas of small nozzles with large throat diameters where the higher erosion rates are more acceptable.

Hannum, N.↗

An evaluation of coding methodologies for potential use in the Alabama Resource Information System (ARIS)-transportation study for the state of Alabama

Procedures developed for digitizing the transportation arteries, airports, and dock facilities of Alabama and placing them in a computerized format compatible with the Alabama Resource Information System are described. The time required to digitize by the following methods: (a) manual, (b) Telereadex 29 with film reading and digitizing system, and (c) digitizing tablets was evaluated. A method for digitizing and storing information from the U. T. M. grid cell base which was compatible with the system was developed and tested. The highways, navigable waterways, railroads, airports, and docks in the study area were digitized and the data stored. The manual method of digitizing was shown to be best for small amounts of data, while the graphic input from the digitizing tablets would be the best approach for entering the large amounts of data required for an entire state.

Montgomery, O. L.↗

Study, optimization, and design of a laser heat engine

Laser heat engine concepts, proposed for satellite applications, were analyzed to determine which engine concepts best meet the requirements of high efficiency (50 percent or better) continuous operation in space. The best laser heat engine for a near-term experimental demonstration, selected on the basis of high overall operating efficiency, high power-to-weight characteristics, and availability of the required technology, is an Otto/Diesel cycle piston engine using a diamond window to admit CO2 laser radiation. The technology with the greatest promise of scaling to megawatt power levels in the long term is the energy exchanger/gas turbine combination.

Source record↗