Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Astronomical models”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

ASCA measurements of the grain-scattered X-ray halos of eclipsing massive X-ray binaries: Vela X-1 and Centaurus X-3

We have measured the decaying dust-scattered X-ray halo of Cen X-3 during its binary eclipse with the ASCA solid-state imaging spectrometer (SIS). The surface brightness profile (SBP) of the image in the low-energy band (0.5-3 keV) lies substantially above the point-spread function (PSF) of the X-ray telescope, while the SBP in the high-energy band (5-10 keV) exhibits no significant deviation. By contrast, the SBPs of Vela X-1 during its eclipse are consistent with the PSF in both the low- and high-energy bands -- strong evidence that a dust halo is indeed present in Cen X-3. Accordingly, we modeled the SBP of Cen X-3 taken from six consecutive time segments under the principal assumptions that the dust is distributed uniformly along a segment of the line of sight, the grains have a power-law size distribution, and the low-energy source flux was the same function of orbital phase before as during our observation. The best-fit set of parameters included a grain density value of 1.3 g/cu cm, substanially less than the density of 'astronomical silicate.' This result supports the idea that interstellar grains are 'fluffy' aggregates of smaller solid particles. We attribute the failure to detect a halo of Vela X-1 during its eclipse phase to extended strong circumsource absorption that probably occurred before the eclipse and allowed the halo to decay away before the observation began.

Woo, Jonathan W.↗

The Ambient and Perturbed Solar Wind: From the Sun to 1 AU

The overall objective of the proposed research was to use numerical solutions of the magnetohydrodynamic (MHD) equations along with comparisons of the computed results with observations to study the following topics: (1) ambient solar wind solutions that extend from the solar surface to 1 astronomical unit (AU), contain closed magnetic structures near the Sun, and are consistent with observed values; (2) magnetic and plasma structures in coronal mass ejections (CMES) as they propagate to the interplanetary medium; (3) relation of MHD shocks to CMEs in the interplanetary medium; (4) interaction of MHD shocks with structures (such as other shocks, corotating interaction regions, current sheets) in the interplanetary plasma; and (5) simulations of observed interplanetary structures. A planned close collaboration with data analysts served to make the model more relevant to the data. The outcome of this research program is an improved understanding of the physical processes occurring in solar-generated disturbances in the interplanetary medium between the Sun and 1 AU.

Steinolfson, R. S.↗

A GCM Recent History of Northern Martian Polar Layered Deposits: Contribution from Past Equatorial Ice Reservoirs

Polar layered deposits are exposed in the walls of the troughs cutting the north polar cap of Mars. They consist of alternating ice and dust layers or layers of an ice-dust mixture with varying proportions and are found throughout the cap. Layers thickness ranges from meters to several tens of meters with an approximately 30 meter dominant wavelength. Although their formation processes is not known, they are presumed to reflect changes in ice and dust stability over orbital and axial variations. Intensive 3-D LMD GCM simulations of the martian water cycle have been thus performed to determine the annual rates of exchange of surface ice between the northern cap and tropical areas for a wide range of obliquity and orbital parameters values.These rates have been employed to reconstruct an history of the northern cap and test simple models of dust-ice layers formation over the last 10 Ma orbital variations. We use the 3-D water cycle model simulated by the 3-D LMD GCM with an intermediate grid resolution (7.5 longitude x 5.625 latitude) and 25 vertical levels. The dust opacity is constant and set to 0,15. No exchange of ice with regolith is allowed. The evolution of the northern cap over obliquity and orbital changes (eccentricity, Longitude of perihelion) has been recently described with this model. High summer insolation favors transfer of ice from the northern pole to the Tharsis and Olympus Montes, while at low obliquity, unstable equatorial ice is redeposited in high-latitude and polar areas of both hemisphere. The disappearance of the equatorial ice reservoir leads to a poleward recession of icy high latitude reservoirs, providing an additional source for the cap accumulation during each obliquity or orbital cycle. Furthering the efforts, a quantitative evolution of ice reservoirs is here investigated for various astronomical conditions.

Levrard, B.↗

The Hopkins Ultraviolet Telescope - Performance and calibration during the Astro-1 mission

Results are reported of spectrophotometric observations, made with the Hopkins Ultraviolet Telescope (HUT), of 77 astronomical sources throughout the far-UV (912-1850 A) at a resolution of about 3 A, and, for a small number of sources, in the extreme UV (415-912 A) beyond the Lyman limit at a resolution of about 1.5 A. The HUT instrument and its performance in orbit are described. A HUT observation of the DA white dwarf G191-B2B is presented, and the photometric calibration curve for the instrument is derived from a comparison of the observation with a model stellar atmosphere. The sensitivity reaches a maximum at 1050 A, where 1 photon/sq cm s A yields 9.5 counts/s A, and remains within a factor of 2 of this value from 912 to 1600 A. The instrumental dark count measured on orbit was less than 0.001 counts/s A.

Davidsen, Arthur F.↗

Compositional Analysis of Titan’s Atmosphere Using Spitzer Infrared Spectrograph Data

We present, for the first time, infrared spectra from the Spitzer Space Telescope’s Infrared Spectrograph (IRS) (2004-2008) of Titan in both the short wavelength-low resolution(SL, R=60~127,5.13-14.29 μm) and short wavelength-high resolution channels (SH, R=600, 9.89-19.51 μm) showing the emissions of CH4, C2H4, C2H2, C2H6, HCN, CO2, HC3N, C3H4, C4H2, and C3H8. Spitzer IRS data has been used to measure atmospheric composition of various Solar System bodies, including Neptune [1] and Uranus [2],[3]. Although Spitzer took multiple dedicated observations of Titan, none of the results have been modeled before. We conduct our own investigation of these datasets and search for new results. We retrieve temperature and gas composition profiles and compare the results obtained for Titan to those of the Cassini Composite Infrared Spectrometer (CIRS) and the Infrared Space Observatory Short Wavelength Spectrometer [4], and comment on the effect of spectral resolution on retrieved information content. We conclude by recommending gaps in current spectroscopic knowledge of molecular bands that could be addressed by theoretical and laboratory study to aid future astronomical studies of Titan, for example the James Webb Space Telescope (JWST) and the Stratospheric Observatory for Infrared Astronomy (SOFIA) Acknowledgments: Data analyzed in this project is public available online on the Spitzer Heritage Archive (sha.ipac.caltech.edu). This research has made use of the NASA/IPAC Infrared Science Archive, which is funded by the National Aeronautics and Space Administration and operated by the California Institute of Technology.

Titan↗

BATSE software for the analysis of the gamma ray burst spatial distribution

The Burst and Transient Source Experiment (BATSE) on the Gamma Ray Observatory (GRO) is designed to study astronomical gamma ray sources and to provide better positional, spectral, and time resolution about these objects than has previously been possible from one experiment. The procedure to be used in the analysis of the gamma ray burst spatial distribution is presented. Data is input from BATSE via the Gamma Ray Burst Catalog (listing individual burst positions, flux values, and associated errors) and the Sky Sensitivity Map (which summarizes observational selection effects in table format). A FORTRAN program generates Monte Carlo burst catalogs, which are models to be compared to the actual distribution. The Monte Carlo models are then filtered through the Sky Sensitivity Map so that they suffer from the same selection effects as the actual catalog data. Additionally, each burst position is converted into a probability distribution to mimic BATSE positional sensitivity. The Burst Catalog, Monte Carlo burst catalog, and Sky Sensitivity Map are then passed onto an IDL program that compares the catalogs for statistical significance. The Sky Sensitivity Map is used to estimate how often each sky area is observed above the minimum flux level in question. Each burst found in this sky area is then weighted according to the frequency with which this sky area is observed. The catalogs are then compared via tests of homogeneity (based on their radial distributions) and isotropy (based upon their angular distributions). The results of the statistical comparisons along with graphs and charts of the summaries, are output from the IDL program for study.

Hakkila, Jon↗

Topological analysis of chaotic orbits: Revisiting Hyperion

There is emerging interest in the possibility of chaotic evolution in astrophysical systems. To mention just one example, recent well-sampled ground-based observations of the Saturian satellite Hyperion strongly suggest that it is exhibiting chaotic behavior. We present a general technique, the method of close returns, for the analysis of data from astronomical objects believed to be exhibiting chaotic motion. The method is based on the extraction of pieces of the evolution that exhibit nearly periodic behavior-episodes during which the object stays near in phase space to some unstable periodic orbit. Such orbits generally act as skeletal features, tracing the topological organization of the manifold on which the chaotic dynamics takes place. This method does not require data sets as lengthy as other nonlinear analysis techniques do and is therefore well suited to many astronomical observing programs. Well sampled data covering between twenty and forty characteristic periods of the system have been found to be sufficient for the application of this technique. Additional strengths of this method are its robustness in the presence of noise and the ability for a user to clearly distinguish between periodic, random, and chaotic behavior by inspection of the resulting two-dimensional image. As an example of its power, we analyze close returns in a numerically generated data set, based on a model for Hyperion extensively studied in the literature, corresponding to nightly observations of the satellite. We show that with a small data set, embedded unstable periodic orbits can be extracted and that these orbits can be responsible for nearly periodic behavior lasting a substantial fraction of the observing run.

Boyd, Patricia T.↗

A Very Energetic Supernova Associated with the Gamma Ray Burst of 29 March 2003

Over the past five years evidence has mounted that long-duration (greater than 2s) gamma-ray bursts (GRBs), the most brilliant of all astronomical explosions, signal the collapse of massive stars in our Universe. This evidence, originally based on the probable association of one unusual GRB with a supernova, now includes the association of GRBs with regions of massive star-formation in distant galaxies, tantalizing evidence of supernova-like light-curve 'bumps' in the optical afterglows of several bursts, and lines of freshly synthesized elements in the spectra of a few X-ray afterglows. These observations support, but do not yet conclusively validate, models based upon the deaths of massive stars, presumably associated with core collapse. Here we report evidence for a very energetic supernova (a hypernova), temporally and spatially coincident with a GRB at redshift z=0.1685. The timing of the supernova indicates that it exploded within a few days of the GRB, strongly suggesting that core-collapse events can give rise to GRBs. Amongst the GRB central engine models proposed to-date, the properties of this supernova thus favour the collapsar model.

Hjorth, Jens↗

Gravitational experiments on solar probe

A covariance analysis was performed for a solar probe trajectory which encounters the sun at four solar radii. The unknown parameters in the analysis are the six initial cartesian coordinates for the probe, six initial cartesian coordinates for the earth, the astronomical unit, the solar gravitational quadrupole coefficient and two post Newtonian meters (beta, gamma). Errors in the unknown parameters were computed as a function of standard errors on the radio tracking data and on the nongravitational forces which act on the probe. Results were obtained for several tracking geometries and for several orbital inclinations to the ecliptic. The analysis shows that the principal scientific result from the radio tracking of a solar probe would be the determination of the quadrupole moment, which would place a constraint on models of the solar interior.

Anderson, J. D.↗

The multichannel astrometric photometer and atmospheric limitations in the measurement of relative positions

The operational Multichannel Astrometric Photometer (MAP) now in use in the Allegheny Observatory astrometric program is the culmination of a decade of design and development effort. A detailed description of the system and its related software is followed by analysis of data acquired in four stellar regions. The study indicates an accuracy (in the sense of conformity to the best model), per night, for stars of the eighth magnitude or brighter, of 0.003 arcsec or better. These data points each have approximately twice the precision of the annual normal points obtained in our photographic program. Accuracy is shown to depend on: (1) the photon-count rate of the target star (it follows that the number of photons from the reference frame is also in important factor), (2) the duration of the observation, (3) the angular size of the reference frame, and (4) the quality of the astronomical seeing. Since (4) and, to a lesser extent, (1) involve the atmospheric characteristics at the time of observation, the probable performance at more favorable sites is discussed briefly.

Gatewood, George D.↗

Nonparametric statistical modeling of binary star separations

We develop a comprehensive statistical model for the distribution of observed separations in binary star systems, in terms of distributions of orbital elements, projection effects, and distances to systems. We use this model to derive several diagnostics for estimating the completeness of imaging searches for stellar companions, and the underlying stellar multiplicities. In application to recent imaging searches for low-luminosity companions to nearby M dwarf stars, and for companions to young stars in nearby star-forming regions, our analyses reveal substantial uncertainty in estimates of stellar multiplicity. For binary stars with late-type dwarf companions, semimajor axes appear to be distributed approximately as a(exp -1) for values ranging from about one to several thousand astronomical units. About one-quarter of the companions to field F and G dwarf stars have semimajor axes less than 1 AU, and about 15% lie beyond 1000 AU. The geometric efficiency (fraction of companions imaged onto the detector) of imaging searches is nearly independent of distances to program stars and orbital eccentricities, and varies only slowly with detector spatial limitations.

Heacox, William D.↗

The Heliopause Electrostatic Rapid Transit System (HERTS) Design, Trades, and Analyses Performed in the First Year of a Two Year Investigation

The Heliopause Electrostatic Rapid Transit System (HERTS)1 was one of the seven total Phase II NASA Innovative Advanced Concepts (NIAC) that was down-selected in 2015 for continued funding and research. In Phase I we learned that a spacecraft propelled by an Electric Sail (E-Sail) can travel great astronomical distances, such as to the Heliopause region of the solar system (approx.100 to 120 AU) in approximately one quarter of the time (10 years) versus the time it took the Voyager spacecraft launched in 1977 (36 years). The current work within the Phase II NIAC effort builds upon the work that was done in the Phase I NIAC and is focused on: 1) Testing of plasma interaction with a charged wire in a unique MSFC test chamber, 2) Development of a Particle-in-Cell (PIC) models that are validated in the plasma testing and used to extrapolate to the E-Sail propulsion system design. 3) Further down select of a wire deployment and control approach from those narrowed down in the Phase I effort. This paper will document the findings to date (June, 2016) of the above focused areas.

Wiegmann, Bruce M.↗

POEMMA's Target of Opportunity Sensitivity to Cosmic Neutrino Transient Sources

We calculate the sensitivity of space-based cosmic neutrino detection from transient sources in the context of the Probe Of Extreme Multi-Messenger Astrophysics (POEMMA) mission using Target- of-Opportunity (ToO) observations. POEMMA uses two spacecraft each with a large Schmidt telescope to simultaneously view the optical signals generated by extensive air showers (EASs). POEMMA is designed for both ultrahigh-energy cosmic ray and very-high-energy neutrino measurements. POEMMA has significant neutrino sensitivity starting in the 10 PeV decade via measurements of Cherenkov signals from upward-moving EASs initiated by tau neutrinos interacting in the Earth. For ToO observations, POEMMA uses the ability to quickly repoint (90° in 500 seconds) each of the two spacecraft to the direction of the transient source. POEMMA EAS measurements are performed during astronomical night, leading to different observational constraints for short- and long-duration bursts. For short-bursts of order 10(exp 3) s, POEMMA will increase the sensitivity of existing experiments (e.g., IceCube and the Pierre Auger Observatory) by up to two orders of magnitude. For long-duration bursts on the scale of 10(exp 5−6) s, the full celestial sky is available and the average neutrino sensitivity will be increased by up to a factor of 50, reaching the desired level to probe model predictions of transient neutrino sources (e.g., of blazer flares as well as both black hole-black hole and neutron star-neutron star mergers). POEMMA’s neutrino sensitivity to various models of transient neutrino sources are detailed. Altogether, our results demonstrate better sensitivity to ToO neutrino sources from the space-based POEMMA experiment compared to current ground-based experiments, and more importantly, demonstrate unique full-sky coverage for ToO neutrino sources.

Venters, Tonia M.↗

Development of Ni-based Multilayer Coatings for Extended Broadband X-ray Imaging

Next-generation astronomical hard x-ray telescopes require new multilayer coating designs to extend the current imaging capabilities into the 100’s of keV. W/Si and Pt/C demonstrate excellent reflectivity response and effective area up to approximately 70 and 80 keV but are severely limited beyond this due to Kα absorption lines. Lower-density metals provide a promising alternative to Pt and W for broader energy bands as their K-edges occur at significantly lower energies. Ni/C is such a low-density pairing that through modeling can achieve the desired energy responses. However, Ni is a notoriously difficult metal to sputter, often resulting is relatively low deposition rates and rough coating surfaces. The goal of this work is to characterize Ni/C multilayers using a custom deposition chamber at GSFC and determine the feasibility of these designs for future hard x-ray missions such as HEX-P.

Danielle N. Gurgew↗

Micromachined Tunable Fabry-Perot Filters for Infrared Astronomy

Micromachined Fabry-Perot tunable filters with a large clear aperture (12.5 to 40 mm) are being developed as an optical component for wide-field imaging 1:1 spectroscopy. This program applies silicon micromachining fabrication techniques to miniaturize Fabry-Perot filters for astronomical science instruments. The filter assembly consists of a stationary etalon plate mated to a plate in which the etalon is free to move along the optical axis on silicon springs attached to a stiff silicon support ring. The moving etalon is actuated electrostatically by electrode pairs on the fixed and moving etalons. To reduce mass, both etalons are fabricated by applying optical coatings to a thin freestanding silicon nitride film held flat in drumhead tension rather than to a thick optical substrate. The design, electro-mechanical modeling, fabrication, and initial results will be discussed. The potential application of the miniature Fabry-Perot filters will be briefly discussed with emphasis on the detection of extra-solar planets.

Barclay, Richard↗

University of Maryland Minimum Crew Cabin Studies ENAE484 X-Hab Final Report

With renewed interest in human spaceflight, and the astronomically high cost to send things into space, NASA is looking into methods for minimizing all aspects of crewed flight. While maintaining a crew of at least two to four people, there are considerations into duration, habitat size, habitat orientation, and many other factors to try and get the most science, safely, for the least amount of money. From these constraints, the class' project was organized. The topic of "Minimum Crew Cabin Sizing" was chosen, with a plan to do experimentation to verify or update some of the volumetric models for various activities. The actual crew cabin itself is something that can easily alter the mass, cost, and development time. In trying to quantify how small is too small { or what can be made smaller { programs can save money, time, and mass with an appropriately sized minimum volume habitat.

David Lee Akin↗

Dual-Resonator Kinetic-Inductance Detector for Distinction between Signal and 1/ƒ Frequency Noise

Astronomical kinetic inductance detectors (KIDs), similar to quantum information devices, experience performance-limiting noise from materials. In particular, 1/ƒ (frequency) noise arises from two-level system defects (TLSs) in the circuit dielectrics and material interfaces and can be a dominant noise mechanism. Here, we present a dual-resonator KID (DuRKID), which is designed for improved noise-equivalent power relative to standard 1/ƒ -noise-limited KIDs. In this study we present the DuRKID schematic, a fabricated example, our first measurement results, a theoretical model including 1/ƒ noise, and a system-noise model containing additional noise sources. The circuit consists of two superconducting resonators sharing an electrical capacitance bridge of four capacitors, each of which hosts TLSs. The device is intended to operate using hybridization of the modes, which causes TLSs to either couple to one mode or the other, depending upon which capacitor they reside in. In contrast, the signal will affect a resonator inductance and, due to mode hybridization, this causes correlated frequency changes in both modes. Therefore, one can better distinguish the photon signal from the TLS frequency noise. To achieve hybridization, a TiN inductor is current biased to allow tuning of one bare-resonator mode into degeneracy with the other. Measurements show that the resonator modes hybridize as expected. The inter-resonator coupling and unintentional coupling of the two resonators to transmission lines are also characterized in measurements. A quantum information-science model allows device-parameter extraction from experimental data and a 1/ƒ noise analysis with uncorrelated noise. A system-noise analysis of the DuRKID, with comparisons to standard KIDs, is performed with generation-recombination noise and amplifier noise. The study reveals that the DuRKID can exhibit a large performance advantage over TLS-limited KID detectors.

N Forouzani↗

Ultraviolet photometry from the orbiting astronomical observatory. XVI - The stellar Lyman-alpha absorption line

The stellar Lyman-alpha line at 1216 A was observed in 29 lightly reddened stars of spectral type B2.5 to B9 by a far-UV spectrophotometer on OAO-2. The equivalent widths obtained range from 15 A at type B2.5 to 65 A at type B8; in the late-B stars, the L-alpha line removes 2 to 3% of the total stellar flux. In this sampling, the strength of the L-alpha line correlates well with measures of the Balmer discontinuity and Balmer line strengths; luminosity classification does not seem to affect the line strength. The observed line widths also agree with the predictions of Mihala's grid of non-LTE model atmospheres. In some cases, the L-alpha line influences the interstellar column densities reported in the interstellar OAO-2 L-alpha survey. Hence, these data toward lightly reddened B2 and B1.5 stars should be regarded as upper limits only.

Savage, B. D.↗