Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ASYMMETRY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

Innovative design of composite structures: Axisymmetric deformations of unsymmetrically laminated cylinders loaded in axial compression

The study focuses on the axisymmetric deformation response of unsymmetrically laminate cylinders loaded in axial compression by known loads. A geometrically nonlinear analysis is used. Though buckling is not studied, the deformations can be considered to be the prebuckling response. Attention is directed at three 16 layer laminates: a (90 sub 8/0 sub 8) sub T; a (0 sub 8/90 sub 8) sub T and a (0/90) sub 4s. The symmetric laminate is used as a basis for comparison, while the two unsymmetric laminates were chosen because they have equal but opposite bending-stretching effects. Particular attention is given to the influence of the thermally-induced preloading deformations that accompany the cool-down of any unsymmetric laminate from the consolidation temperature. Simple support and clamped boundary conditions are considered. It is concluded that: (1) The radial deformations of an unsymmetric laminate are significantly larger than the radial deformations of a symmetric laminate, although for both symmetric and unsymmetric laminates the large deformations are confined to a boundary layer near the ends of the cylinder; (2) For this nonlinear problem the length of the boundary layer is a function of the applied load; (3) The sign of the radial deformations near the supported end of the cylinder depends strongly on the sense (sign) of the laminate asymmetry; (4) For unsymmetric laminates, ignoring the thermally-induced preloading deformations that accompany cool-down results in load-induced deformations that are under predicted; and (5) The support conditions strongly influence the response but the influence of the sense of asymmetry and the influence of the thermally-induced preloading deformations are independent of the support conditions.

Hyer, M. W.↗
NASA NTRS1988

A kinematic model of ridge-transform geometry evolution

A simple kinematic model is used to study the effects of various parameters on the evolution of zero-offset transforms and very-long-offset transforms. Consideration is given to the effects of initial configuration, degree of asymmetry, and degree of bias in asymmetry on the generation of these ridge transform geometries and on the possible steady-state nature of the transform length spectra. Of the parameters tests, only lack of 'memory' of zero-offset transforms affects transform length distribution.

Stoddard, Paul R.↗
NASA NTRS1990

The Ashen Light

Present understanding of the Ashen Light of Venus is reviewed. Ashen Light is most often reported when Venus is in the evening sky, when the evening terminator of Venus is toward the earth. It is argued that the local time asymmetry is too great to be explained by terrestrial effects alone. It is argued that Venus lightning is the only known phenomenon that shows a marked dawn-dusk asymmetry on Venus and which could also explain the occurrence of Ashen Light. The following factors appear to affect the visibility of Ashen Light from earth: the distance of Venus from the earth, the length of time Venus is above the horizon, and the local time distribution of the Ashen Light source on Venus.

Russell, C. T.↗
NASA NTRS1990

Momentum balance in four solar flares

Solar Maximum Mission soft X-ray spectra and National Solar Observatory (Sacramento Peak) H-alpha spectra were combined in a study of high-speed flows during the impulsive phase of four solar flares. In all events, a blue asymmetry (indicative of upflows) was observed in the coronal Ca XIX line during the soft X-ray rise phase. In all events a red asymmetry (indicative of downflows) was observed simultaneously in chromospheric H-alpha. These oppositely directed flows were concurrent with impulsive hard X-ray emission. Combining the velocity data with estimates of the density based on emission measurements and volume estimates, it is shown that for the impulsive phase as a whole the total momentum of upflowing soft X-ray plasma equaled that of the downflowing H-alpha plasma, to within an order of magnitude, in all four events. Only the chromospheric evaporation model predicts equal total momentum in the upflowing soft X-ray-emitting and downflowing H-alphba-emitting materials.

Canfield, Richard C.↗
NASA NTRS1990

Simulations of the general circulation of the Martian atmosphere. I - Polar processes

Numerical simulations of the Martian atmosphere general circulation are carried out for 50 simulated days, using a three-dimensional model, based on the primitive equations of meteorology, which incorporated the radiative effects of atmospheric dust on solar and thermal radiation. A large number of numerical experiments were conducted for alternative choices of seasonal date and dust optical depth. It was found that, as the dust content of the winter polar region increased, the rate of atmospheric CO2 condensation increased sharply. It is shown that the strong seasonal variation in the atmospheric dust content observed might cause a number of hemispheric asymmetries. These asymmetries include the greater prevalence of polar hoods in the northern polar region during winter, the lower albedo of the northern polar cap during spring, and the total dissipation of the northern CO2 ice cap during the warmer seasons.

Pollack, James B.↗
NASA NTRS1990

Computational study for passive control of supersonic asymmetric vortical flows around cones

The unsteady, compressible, double and single thin-layer Navier-Stokes equations are used to numerically study for the passive control of steady and unsteady, supersonic asymmetric flows around circular and noncircular cones. The main computational scheme of the present study is the implicit upwind, flux-difference splitting, finite-volume scheme. Passive control of flow asymmetry is studied by using a vertical fin in the leeward plane of geometric symmetry and side strakes with and without thickness at different orientations. The study is focused on circular-section cones since they are the most potential section-shapes for strong flow asymmetry. Side-strakes passive control has been shown to be more efficient and practical than the vertical-fin passive control.

Liu, C. H.↗
NASA NTRS1990

A statistical study of ions and magnetic fields in the Venus magnetotail

A statistical characterization is made of the combined ion and magnetic field properties of the Venus magnetosheath and magnetotail, on the basis of plasma and magnetic field data from 223 Pioneer Venus orbits; no assumptions are made as to existing regions or their plasma and field characteristics. Plasma is found to flow tailward in all locations, and the magnetotail is highly draped. Weak magnetic field asymmetries are associated with the plasma dropouts. A high-E/q plasma population, previously interpreted as planetary-pickup ions, is found asymmetrically both within the tail and in the adjacent sheath. The Venus tail is filled with plasma that is primarily shocked solar wind, at fluxes that are sometimes undetectable; the tail coexists with a photoion population which generates asymmetries in the bulk plasma and magnetic field properties.

Moore, K. R.↗
NASA NTRS1990

Numerical investigations in three-dimensional internal flows

The flow in the transonic test facility was investigated using the three dimensional computational fluid dynamics techniques. The application of the full Navier-Stokes three dimensional code to the flow qualities in the contraction section of transonic wind tunnel is discussed. Initially, two dimensional solutions indicated the possibility for large secondary flow to exist as a result of the asymmetries involved in the contraction section as it is constructed. The results of a full three dimensional solution indicate that only minor pressure variations actually occur in the contraction section within any given cross flow plane. Further analysis of the three dimensional solution indicated that these slight lateral pressure gradients lead to negligible secondary flows, except within a small region in the corners within the boundary layer. On the basis of present solution, it would not be expected that any flow asymmetries and/or secondary flow present within contraction section are associated with the methods by which the contraction is implemented in its present configuration.

Rose, William C.↗
NASA NTRS1990

Circumnuclear ionized gas in starburst nuclei

In order to study kinematical properties of starburst nuclei (SBNs), researchers made high-resolution spectroscopy of fifteen SBNs in the H alpha region using an intensified Reticon system attached to the coude focus of the 188-cm reflector at the Okayama Astrophysical Observatory. The instrumental resolution is 21 km s(-1) Full Width Half Maximum (FWHM) at lambda sub H alpha. As for the archetypical SBN, Mrk 538 (=NGC 7714), researchers present high-resolution emission line profiles of several species of ions such as (OIII), (NII), (SII), and (OII). Main results and conclusions are summarized. It has been known that emission-line profiles of SBNs are symmetrical and narrow. However, this high-resolution spectroscopy shows that the observed emission-line profiles of the SBNs have the following asymmetrical patterns; blueward, redward, and double-peaked. It is known that such features have been observed for narrow line regions (NLRs) of active galactic nuclei (AGNs). There is no remarkable correlation between the asymmetry index and the reddening indicator such as a Balmer decrement. Thus the line asymmetry is not attributed to inhomogeneous obscuration in the emitting regions. The observed FWHMs of the H alpha emission lines cover a range from 85 km s(-1) to 318 km s(-1) and are slightly larger than those of (NII) lambda 6584A emission except for the double-peaked SBNs. The FWHMs of H alpha emission show a good correlation with sin i (i is an inclination angle of galaxy). This correlation means that the FWHMs of the SBNs suffer significantly from rotational broadening. Mrk 52 is an anomalous SBN because it has narrow emission line widths for its high inclination angle (cf. Taniguchi 1987). From the above correlation, it is estimated that the intrinsic (i.e., rotation free) FWHMs of H alpha emission are about 50 km s(-1).

Taniguchi, Yoshiaki↗
NASA NTRS1990

The diffuse ionized interstellar medium perpendicular to the plane of NGC 891

In an attempt to study the structure and the properties of the diffuse ionized interstellar medium perpendicular to the plane of disk galaxies researchers obtained H alpha images and spectra of NGC 891. Perhaps the most remarkable property of the H alpha emission line in NGC 891 is its extension out of the plane of the galaxy: researchers are able to measure the H alpha line out to more than 30 seconds (1.4 kpc) from the midplane. This means that the ionized hydrogen extends at least four times higher than the neutral hydrogen layer. An anomalously large scale-height for the ionized gas of approx. equals 1 kpc is also found in the Milky Way. The echelle spectra show a changing ratio of NII to H alpha. This excludes the possibility that the large scaleheight of the emission is due to scattering of disk emission by dust high above the plane. The z-extent of the H alpha emission is confirmed by the imaging result. The large z-extent of the ionized gas is confined to the inner half of the visible disk. In this inner region the H alpha distribution also shows a filamentary structure of the diffuse ionized medium. These filaments, sticking out of the plane, originate in HII regions in the plane. The H alpha image also shows a large scale asymmetry if the NE and SW parts of the disk are compared. The NE part is more prominent and extended in H alpha. The same asymmetry is also seen in the radio continuum distribution. This correlation between the diffuse ionized medium and the distribution of relativistic electrons is one example of a relation between star formation processes in the disk and the various components of the halo. Thermal filaments or spurs which are related to HII regions are also known in the Galaxy. These filamentary structures perpendicular to the galactic planes may represent the chimneys which result in the supernova dominated model of the Interstellar Medium by Norman and Ikeuchi (1989).

Dettmar, Ralf-Juergen↗
NASA NTRS1990

Asymmetric supersonic flow around cones with noncircular sections

The unsteady, compressible, single and double thin-layer, Navier-Stokes equations are used to solve for steady and unsteady, asymmetric, supersonic flow around pointed bodies with noncircular sections at high incidence and zero side slip. The equations are solved by using an implicit, upwind, flux-difference splitting finite-volume scheme. Since the flow is locally conical, the solutions are presented on a cross-flow plane at the axial station of unit. The grid is generated by using a modified Joukowski transformation. The computational applications cover noncircular sections with elliptic and diamond shapes. Unsteady asymmetric vortex shedding has been captured at large angles of attack. It is shown that for the same flow conditions and same cross-section fineness ratio, the diamond-section cones develop less flow asymmetry than the elliptic-section cones. Passive control of flow asymmetry was also demonstrated computationally.

Kandil, Osama A.↗
NASA NTRS1990

Fluid dynamics and low gravity effects of chemical vapor deposition

Based on the comparison between experimental data and numerical results for the growth of GaAs from TMGa, it was shown that 3D simulations are necessary to simulate rectangular CVD reactors even when operated under subcritical (Ra) conditions. The important points found are summarized in the three attached reprints. The experimental studies of mixed convection in horizontal channels have shown three regimes of high Ra (22,220) number flows. At Re = 18.5, the rolls develop very quickly, significantly modulating the axial velocity even before it reaches the beginning of the hot plate. A few centimeters downstream, the velocities become asymmetric about the vertical centerplane and at x = 12 cm, become unsteady. These asymmetries were predicted theoretically, but experimental evidence has not been published prior to this work. At Re = 36, the axial velocity is only slightly modified at x = 0. Although the flow remains steady and symmetric about the vertical centerplane, there is a small spatial oscillation in the velocities over the length of the channel. The period of this oscillation was around 5 cm. At Re = 54, the longitudinal rolls developed smoothly over a length of 30 cm, with no asymmetries, unsteadiness, or spatial oscillations. Comparison of numerical simulations of these flows to experiments has revealed the importance and difficulty of setting proper thermal boundary conditions on the sidewalls. Calculated flows and experimentally measured flows showed very similar profiles, but at different axial locations, with the rolls developing more rapidly in the experiments. This is directly attributable to partially conducting sidewalls of the apparatus being hotter in the entrance section than the adiabatic walls of the simulations. A thorough comparison of the experimental data and numerical results for a variety of sidewall boundary conditions is in preparation.

Nyce, Thomas A.↗
NASA NTRS1988

Effects of switch leakages upon Nimbus-7 SMMR calibration

A calibration model for the Nimbus 7 Scanning Multichannel Microwave Radiometer (SMMR) is studied. This model not only removes major drawbacks of the current calibration model but also helps in the understanding of the performance degradation of the aging instrument. The current Nimbus 7 SMMR calibration algorithm was derived without considering the interference effect between the two orthogonally polarized signals merging at a ferrite polarization selector switch. The resulting calibrated brightness temperatures, considered as a function of scan angle, are not symmetric around scan angle = 0. However, neither the origin of the asymmetry nor the manner in which the two orthogonal components are mixed has been fully understood. The new calibration model proposed incorporates all the leakage factors associated with the ferrite switches along the signal paths. The resulting calibration equations clarify how the orthogonal components of surface brightness are coupled at radiometers. As a consequence, the origin of the asymmetry is clearly identified and explained. In addition, the feasibility of absolute calibration using in-orbit data is discussed.

Han, Daesoo↗
NASA NTRS1991

Thin-layer and full Navier-Stokes, locally-conical and three-dimensional asymmetric solutions

The unsteady, compressible thin-layer and full Navier-Stokes equations are used to numerically simulate steady and unsteady asymmetric, supersonic, locally-conical flows around a 5-deg-semiapex angle circular cone. The main computational scheme used for the present computations is the implicit, upwind, flux-difference splitting, finite-volume scheme. Comparisons of the solutions using the two sets of equations are presented for the flow asymmetry and its control. Computational studies are also presented to investigate the effects of the freestream Reynolds number and the locally-scaled Reynolds number on the flow asymmetry. These studies are carried out using the full Navier-Stokes equations. Three-dimensional, asymmetric flow solutions are also presented for a 5-deg-semiapex angle cone of unit length and a cone-cylinder configuration. The three-dimensional solutions are obtained by using the thin-layer equations and short-duration transient side-slip disturbances along with a very fine grid.

Kandil, O. A.↗
NASA NTRS1991

Analysis of flow on cones and cylinders using discrete vortex methods

Discrete vortex methods have been developed to investigate the vortex flows on cones and two-dimensional cylinders. The cone problem was solved by assuming that, to meet conical flow and zero-force conditions, the vortices move radially away from the body at a given cross-section. The two-dimensional cylinder problem was solved by limiting the velocity along the zero streamline surrounding the vortex field to two times freestream velocity and by limiting the lateral movement of the vortices. Variations in vortex position and strength with time were determined by taking into account the rate at which circulation is generated at separation points on the body. The calculated vortex positions and strengths were in good agreement with available experimental data. Viscous effects could be accounted for by adding empirically determined damping terms to the velocity equations. The models indicate that different types of asymmetry occur for the cone and two-dimensional cylinder. Asymmetry onset boundaries determined by the discrete vortex method show the same trend as experiment.

Gainer, Thomas G.↗
NASA NTRS1991

Dynamical evolution of topology of large-scale structure

The nonlinear effects of statistical biasing and gravitational evolution on the genus are studied. The biased galaxy subset is picked for the first time by actually identifying galaxy-sized peaks above a fixed threshold in the initial conditions, and their subsequent evolution is followed. It is found that in the standard cold dark matter (CDM) model the statistical biasing in the locations of galaxies produces asymmetry in the genus curve and coupling with gravitational evolution gives rise to a shift in the genus curve to the left in moderately nonlinear regimes. Gravitational evolution alone reduces the amplitude of the genus curve due to strong phase correlations in the density field and also produces asymmetry in the curve. Results on the genus of the mass density field for both CDM and hot dark matter models are consistent with previous work by Melott, Weinberg, and Gott (1987).

Park, Changbom↗
NASA NTRS1991

Asymmetric turbulent vortical flows over slender bodies

Time-accurate numerical solutions have been obtained of equations modeling turbulent subsonic flows over a slender ogive-cylinder body of revolution in the high-angle-of-attack regime where a large asymmetry in the mean flow has been observed experimentally. A modified algebraic eddy-viscosity turbulence model was utilized to correctly compute the effects of the asymmetric vortices on the underlying viscous layers. In order to reproduce any one of the experimentally observed asymmetric flow-fields, it was found necessary to add a small geometrical disturbance near the body apex. By determining an appropriate size of the disturbance, it was possible to obtain excellent agreement between numerical results and experimental data for angles of attack of 30 and 40 deg, Reynolds numbers of 3.0 x 10 to the 6th and = 4.0 x 10 to the 6th, and several roll angles. When the disturbance was removed, the flow field returned to its original symmetric shape. These results are similar in behavior to solutions obtained previously for laminar flows. Just as in the laminar case, results suggest that the origin of the asymmetry is a convective-type instability of an originally symmetric flow.

Degani, David↗
NASA NTRS1991

Wind tunnel investigation of the interaction and breakdown characteristics of slender wing vortices at subsonic, transonic, and supersonic speeds

The vortex dominated aerodynamic characteristics of a generic 65 degree cropped delta wing model were studied in a wind tunnel at subsonic through supersonic speeds. The lee-side flow fields over the wing-alone configuration and the wing with leading edge extension (LEX) added were observed at M (infinity) equals 0.40 to 1.60 using a laser vapor screen technique. These results were correlated with surface streamline patterns, upper surface static pressure distributions, and six-component forces and moments. The wing-alone exhibited vortex breakdown and asymmetry of the breakdown location at the subsonic and transonic speeds. An earlier onset of vortex breakdown over the wing occurred at transonic speeds due to the interaction of the leading edge vortex with the normal shock wave. The development of a shock wave between the vortex and wing surface caused an early separation of the secondary boundary layer. With the LEX installed, wing vortex breakdown asymmetry did not occur up to the maximum angle of attack in the present test of 24 degrees. The favorable interaction of the LEX vortex with the wing flow field reduced the effects of shock waves on the wing primary and secondary vortical flows. The direct interaction of the wing and LEX vortex cores diminished with increasing Mach number. The maximum attainable vortex-induced pressure signatures were constrained by the vacuum pressure limit at the transonic and supersonic speeds.

Erickson, Gary E.↗