Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ARMS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28
All sourcesNASA NTRSDOE OSTI
NASA NTRS1993

Motion control of 7-DOF arms - The configuration control approach

Graphics simulation and real-time implementation of configuration control schemes for a redundant 7-DOF Robotics Research arm are described. The arm kinematics and motion control schemes are described briefly. This is followed by a description of a graphics simulation environment for 7-DOF arm control on the Silicon Graphics IRIS Workstation. Computer simulation results are presented to demonstrate elbow control, collision avoidance, and optimal joint movement as redundancy resolution goals. The laboratory setup for experimental validation of motion control of the 7-DOF Robotics Research arm is then described. The configuration control approach is implemented on a Motorola-68020/VME-bus-based real-time controller, with elbow positioning for redundancy resolution. Experimental results demonstrate the efficacy of configuration control for real-time control.

Seraji, Homayoun↗
NASA NTRS1994

Galactic arm models of gamma-ray burst sources

Using the BATSE observations, evidence was presented recently that at least some of the gamma-ray burst sources could be in our Galactic spiral arms. Other analyses have disagreed with this conclusion, leading to an active debate as to whether this can be true. Taking a different approach, a large range of possible spiral arm spatial distributions for the gamma-ray burst sources is investigated here, and it is shown that none of these are able to simultaneously fit the current BATSE (V/V(sub max)), (cos theta), and (sin(exp 2) b) observations if all the sources are in the spiral arms. If claims continue to be made that the burst sources are in the Galactic spiral arms, it will be necessary to produce an acceptable spatial distribution for the sources.

Smith, I. A.↗
NASA NTRS2000

Autonomous, Full-Time Cloud Profiling at Arm Sites with Micro Pulse Lidar

Since the early 1990's technology advances permit ground based lidar to operate full time and profile all significant aerosol and cloud structure of the atmosphere up to the limit of signal attenuation. These systems are known as Micro Pulse Lidars (MPL), as referenced by Spinhirne (1993), and were first in operation at DOE Atmospheric Radiation Measurement (ARM) sites. The objective of the ARM program is to improve the predictability of climate change, particularly as it relates to cloud-climate feedback. The fundamental application of the MPL systems is towards the detection of all significant hydrometeor layers, to the limit of signal attenuation. The heating and cooling of the atmosphere are effected by the distribution and characteristics of clouds and aerosol concentration. Aerosol and cloud retrievals in several important areas can only be adequately obtained with active remote sensing by lidar. For cloud cover, the height and related emissivity of thin clouds and the distribution of base height for all clouds are basic parameters for the surface radiation budget, and lidar is essetial for accurate measurements. The ARM MPL observing network represents the first long-term, global lidar study known within the community. MPL systems are now operational at four ARM sites. A six year data set has been obtained at the original Oklahoma site, and there are several years of observations at tropical and artic sites. Observational results include cloud base height distributions and aerosol profiles. These expanding data sets offer a significant new resource for cloud, aerosol and atmospheric radiation analysis. The nature of the data sets, data processing algorithms, derived parameters and application results are presented.

Spinhirne, James D.↗
NASA NTRS2001

Improvements in AVHRR Daytime Cloud Detection Over the ARM NSA Site

Clouds play an important role in the radiation budget over Arctic and Antarctic. Because of limited surface observing capabilities, it is necessary to detect clouds over large areas using satellite imagery. At low and mid-latitudes, satellite-observed visible (VIS; 0.65 micrometers) and infrared (IR; 11 micrometers) radiance data are used to derive cloud fraction, temperature, and optical depth. However, the extreme variability in the VIS surface albedo makes the detection of clouds from satellite a difficult process in polar regions. The IR data often show that the surface is nearly the same temperature or even colder than clouds, further complicating cloud detection. Also, the boundary layer can have large areas of haze, thin fog, or diamond dust that are not seen in standard satellite imagery. Other spectral radiances measured by satellite imagers provide additional information that can be used to more accurately discriminate clouds from snow and ice. Most techniques currently use a fixed reflectance or temperature threshold to decide between clouds and clear snow. Using a subjective approach, Minnis et al. (2001) found that the clear snow radiance signatures vary as a function of viewing and illumination conditions as well as snow condition. To routinely process satellite imagery over polar regions with an automated algorithm, it is necessary to account for this angular variability and the change in the background reflectance as snow melts, vegetation grows over land, and melt ponds form on pack ice. This paper documents the initial satellite-based cloud product over the Atmospheric Radiation Measurement (ARM) North Slope of Alaska (NSA) site at Barrow for use by the modeling community. Cloud amount and height are determined subjectively using an adaptation of the methodology of Minnis et al. (2001) and the radiation fields arc determined following the methods of Doelling et al. (2001) as applied to data taken during the Surface Heat and Energy Budget of the Arctic (SHEBA). The procedures and data produced in this empirically based analysis will also facilitate the development of the automated algorithm for future processing of satellite data over the ARM NSA domain. Results are presented for May, June, and July 1998. ARM surface data are use to partially validate the results taken directly over the ARM site.

Chakrapani, V.↗
NASA NTRS2002

Exploring Heart and Lung Function in Space: ARMS Experiments

The Advanced Respiratory Monitoring System (ARMS) is a suite of monitoring instruments and supplies used to study the heart, lungs, and metabolism. Many experiments sponsored by the European Space Agency (ESA) will be conducted using ARMS during STS-107. The near-weightless environment of space causes the body to undergo many physiological adaptations, and the regulation of blood pressure is no exception. Astronauts also experience a decrease in blood volume as an adaptation to microgravity. Reduced blood volume may not provide enough blood pressure to the head during entry or landing. As a result, astronauts often experience light-headedness, and sometimes even fainting, when they stand shortly after returning to Earth. To help regulate blood pressure and heart rate, baroreceptors, sensors located in artery walls in the neck and near the heart, control blood pressure by sending information to the brain and ensuring blood flow to organs. These mechanisms work properly in Earth's gravity but must adapt in the microgravity environment of space. However, upon return to Earth during entry and landing, the cardiovascular system must readjust itself to gravity, which can cause fluctuation in the control of blood pressure and heart rate. Although the system recovers in hours or days, these occurrences are not easily predicted or understood - a puzzle investigators will study with the ARMS equipment. In space, researchers can focus on aspects of the cardiovascular system normally masked by gravity. The STS-107 experiments using ARMS will provide data on how the heart and lungs function in space, as well as how the nervous system controls them. Exercise will also be combined with breath holding and straining (the Valsalva maneuver) to test how heart rate and blood pressure react to different stresses. This understanding will improve astronauts' cardiopulmonary function after return to Earth, and may well help Earthbound patients who experience similar effects after long-term bed rest.

Andre Kuipers↗
NASA NTRS1994

Algorithms for Unequal-Arm Michelson Interferometers

A method of data acquisition and data analysis is described in which the performance of Michelson-type interferometers with unequal arms can be made nearly the same as interferometers with equal arms. The method requires a separate readout of the relative phase in each arm, made by interfering the returning beam in each arm with a fraction of the outgoing beam.

Michelson Interferometer↗
NASA NTRS2006

A Climatology of Midlatitude Continental Clouds from the ARM SGP Site: Cloud Fraction and Surface Radiative Forcing - Part II

Data collected at the Department of Energy Atmospheric Radiation Measurement (ARM) Southern Great Plains (SGP) Central Facility (SCF) are analyzed to determine the monthly and hourly variations of cloud fraction and radiative forcing between January 1997 and December 2002. Cloud fractions are estimated for total cloud cover and for single-layered low (0-3 km), middle (3-6 km), and high clouds (more than 6 km) using ARM SCG ground-based paired lidar-radar measurements. Shortwave (SW) and longwave (LW) fluxes are derived from up- and down-looking standard precision spectral pyranometers and precision infrared radiometer measurements with uncertainties of approximately 10 Wm(exp -2). The annual averages of total, and single-layered low, middle and high cloud fractions are 0.49, 0.11, 0.03, and 0.17, respectively. Both total and low cloud amounts peak during January and February and reach a minimum during July and August, high clouds occur more frequently than other types of clouds with a peak in summer. The average annual downwelling surface SW fluxes for total and low clouds (151 and 138 Wm(exp-2), respectively) are less than those under middle and high clouds (188 and 201 Wm(exp -2), respectively), but the downwelling LW fluxes (349 and 356 Wm(exp -2)) underneath total and low clouds are greater than those from middle and high clouds (337 and 333 Wm(exp -2)). Low clouds produce the largest LW warming (55 Wm(exp -2) and SW cooling (-91 Wm(exp -2)) effects with maximum and minimum absolute values in spring and summer, respectively. High clouds have the smallest LW warming (17 Wm(exp -2)) and SW cooling (-37 Wm(exp -2)) effects at the surface. All-sky SW CRF decreases and LW CRF increases with increasing cloud fraction with mean slopes of -0.984 and 0.616 Wm(exp -2)%(exp -1), respectively. Over the entire diurnal cycle, clouds deplete the amount of surface insolation more than they add to the downwelling LW flux. The calculated CRFs do not appear to be significantly affected by uncertainties in data sampling and clear-sky screening. Traditionally, cloud radiative forcing includes, not only the radiative impact of the hydrometeors, but also the changes in the environment. Taken together over the ARM SCF, changes in humidity and surface albedo between clear and cloudy conditions offset approximately 20% of the NET radiative forcing caused by the cloud hydrometeors alone. Variations in water vapor, on average, account for 10% and 83% of the SW and LW CRFs, respectively, in total cloud cover conditions. The error analysis further reveals that the cloud hydrometeors dominate the SW CRF, while water vapor changes are most important for LW flux changes in cloudy skies. Similar studies over other locales are encouraged where water and surface albedo changes from clear to cloudy conditions may be much different than observed over the ARM SCF.

Xi, B.↗
NASA NTRS2008

Comparison of CERES-MODIS Stratus Cloud Properties with Ground-Based Measurements at the DOE ARM Southern Great Plains Site

Overcast stratus cloud properties derived for the Clouds and the Earth's Radiant Energy system (CERES) Project using Terra and Aqua Moderate Resolution Imaging Spectroradiometer (MODIS) data are compared with observations taken at the Atmospheric Radiation Measurement (ARM) Southern Great Plains site from March 2000 through December 2004. Retrievals from ARM surface-based data were averaged over a 1-hour interval centered at the time of each satellite overpass, and the CERES-MODIS cloud properties were averaged within a 30-km x 30 km box centered on the ARM SGP site. Two datasets were analyzed: all of the data (ALL) which include multilayered, single-layered, and slightly broken stratus decks and a subset, single-layered unbroken decks (SL). The CERES-MODIS effective cloud heights were determined from effective cloud temperature using a lapse rate method with the surface temperature specified as the 24-h mean surface air temperature. For SL stratus, they are, on average, within the ARM radar-lidar estimated cloud boundaries and are 0.534 +/- 0.542 km and 0.108 +/- 0.480 km lower than the cloud physical tops and centers, respectively, and are comparable for day and night observations. The mean differences and standard deviations are slightly larger for ALL data, but not statistically different to those of SL data. The MODIS-derived effective cloud temperatures are 2.7 +/- 2.4 K less than the surface-observed SL cloud center temperatures with very high correlations (0.86-0.97). Variations in the height differences are mainly caused by uncertainties in the surface air temperatures, lapse rates, and cloud-top height variability. The biases are mainly the result of the differences between effective and physical cloud top, which are governed by cloud liquid water content and viewing zenith angle, and the selected lapse rate, -7.1 K km(exp -1). Based on a total of 43 samples, the means and standard deviations of the differences between the daytime Terra and surface retrievals of effective radius r(sub e), optical depth, and liquid water path for SL stratu are 0.1 +/- 1.9 micrometers (1.2 +/- 23.5%), -1.3 +/- 9.5 (-3.6 +/-26.2%), and 0.6 +/- 49.9 gm (exp -2) (0.3 +/- 27%), respectively, while the corresponding correlation coefficients are 0.44, 0.87, and 0.89. For Aqua, they are 0.2 +/- 1.9 micrometers (2.5 +/- 23.4%), 2.5 +/- 7.8 (7.8 +/- 24.3%), and 28.1 +/- 52.7 gm (exp -2) (17.2 +/- 32.2%), as well as 0.35, 0.96, and 0.93 from a total of 21 cases. The results for ALL cases are comparable. Although a bias in R(sub e) was expected because the satellite retrieval of effective radius only represents the top of the cloud, the surface-based radar retrievals revealed that the vertical profile of r(sub e) is highly variable with smaller droplets occurring at cloud top in some cases. The larger bias in optical depth and liquid water path for Aqua is due, at least partially, to differences in the Terra and Aqua MODIS visible channel calibrations. methods for improving the cloud-top height and microphysical property retrievals are suggested.

Dong, Xiquan↗
NASA NTRS2011

Time Domain Simulations of Arm Locking in LISA

Arm locking is a technique that has been proposed for reducing laser frequency fluctuations in the Laser Interferometer Space Antenna (LISA). a gravitational-wave observatory sensitive' in the milliHertz frequency band. Arm locking takes advantage of the geometric stability of the triangular constellation of three spacecraft that comprise LISA to provide a frequency reference with a stability in the LISA measurement band that exceeds that available from a standard reference such as an optical cavity or molecular absorption line. We have implemented a time-domain simulation of arm locking including the expected limiting noise sources (shot noise, clock noise. spacecraft jitter noise. and residual laser frequency noise). The effect of imperfect a priori knowledge of the LISA heterodyne frequencies and associated "pulling" of an arm locked laser is included. We find that our implementation meets requirements both on the noise and dynamic range of the laser frequency.

Thorpe, J. I.↗
NASA NTRS2014

The European Robotic Arm: A High-performance Mechanism Finally on Its Way to Space

This paper describes the design and qualification of the European Robotic Arm (ERA), which is planned to be launched by the end of 2015. After years of changes, a shift of launcher and new loads, launch preparation is underway. The European Robotic Arm ERA has been designed and manufactured by Dutch Space and its subcontractors such as Astrium, SABCA and Stork with key roles for the mechanical aspects. The arm was originally designed to be launched by the STS (mounted on a Russian module for the ISS) in 2001. However, due to delays and the STS disaster, a shift was made to the Russian Proton rocket. ERA will be launched on the Multipurpose Laboratory Module (MLM). This module, which is now planned for launch to the ISS in 2015, will carry the ERA. The symmetrical design of the arm with a complete 3 degree-of-freedom wrist and general-purpose end effector on both sides, allows ERA to relocate on the station by grappling a new base point and releasing the old one, and move to different working locations.

Cruijssen, H. J.↗
NASA NTRS2019

ARMS: A Developing Metadata Standard for Describing Astrobiology Research Products

These presentation slides introduce the Astrobiology Resource Metadata Standard (ARMS), a new metadata standard under development at NASA Ames Research Center, in conjunction with the Astrobiology Habitable Environments Database (AHED) project. The intent of this standard is to enable uniform, internet-based search and discovery of astrobiology 'resources', i.e. virtually any product of astrobiology research, including datasets, physical samples, software, publications, websites, images, video, presentations, etc. The current draft of ARMS defines 16 different metadata properties used to describe a given resource, including routine information such as name, resource type, description, personnel, funding, and related publications. But the true power in ARMS lies in four astrobiology-specific pieces of metadata: field site location enables geospatially-restricted search for resources using placenames or geospatial coordinates; research theme associates resources with one of six broad areas of astrobiological research (as identified in the 2015 NASA Astrobiology Strategy document); astrobiology disciplines captures the set of science disciplines most relevant to creation or use of resources; and finally, astrobiology keywords characterize resources in much in the same summarizing way that journal article keywords describe publications. An initial draft of the ARMS standard is being prepared for circulation to the astrobiology community for feedback and revision.

Science Metadata↗
NASA NTRSDate not supplied

Overview of SatCORPS Satellite-Derived Cloud and Radiation Retrieval Coverage of ARM Domains

The ARM Climate Research Facility program maintains a number of climatically representative sites, which provide long-term cloud- and climate-monitoring records via ground-based instrumentation. These measurements provide a valuable data record over a localized region, but can be greatly enhanced by use of satellite monitoring. Satellite analyses over larger domains can provide parameters helpful for monitoring climate and evaluating models. The NASA/Langley Cloud group routinely derives such cloud and radiative parameters, from various geostationary and polar-orbiting satellite coverage over ARM sites; the group provides near-realtime analyses covering the 3 ARM fixed sites, as well as the GO-Amazon AMF site. This is accomplished by employing a suite of algorithms including VISST (Visible Infrared Solar Split-Window Technique), SIST (Solar Infrared Split-Window Technique), and SINT (Solar-infrared Infrared Near-Infrared Technique), now collectively called SatCORPS (Satellite Cloud Observations and Radiative Property retrieval System). An overview and catalog of SatCORPS-derived datasets processed for ASR, and available from both the ARM archive and the NASA/Langley Cloud group website, is provided. Specific improvements included in recently added datasets such as GO-Amazon and Azores are highlighted, including an improved cloud-detection mask, as well as improvements in derived Top-of-Atmosphere (TOA) SW albedoes and LW fluxes. New narrowband-to-broadband (NB-BB) fits and corrections for improved TOA fluxes are illustrated, including MTSAT-1/CERES Aqua NB-BB fits for the TWPICE field campaign, as well as new fits covering the Azores region which incorporate GERB TOA fluxes (Geostationery Earth Radiation Budget). Finally, validation of the reprocessed SatCORPS datasets is shown.

M M Khader↗
NASA NTRS2021

InSight Robotic Arm Testing Activities for HP3 Mole Anomaly Recovery on Mars

The InSight lander’s Heat Flow and Physical Properties Package (HP3 ) was deployed on Mars in February 2019 and began attempting to penetrate to its target depth range of 3-5 meters shortly thereafter. However, the mole’s downward progress stopped after only 35 cm of penetration. In response, the project convened an Anomaly Response Team (ART) and since then has been attempting to diagnose the problem and assist the mole using the tools available on Mars. The key asset used in this effort has been the Instrument Deployment System (IDS), which includes two cameras and a robotic Instrument Deployment Arm (IDA). Since the IDS was originally intended only to deploy InSight’s primary instruments to the Martian surface, new testbed setups, experiments, and operational protocols (e.g., command sequences) were required and had to be developed on a short timeline. The HP3 Mole ART first focused on gathering all observable data on Mars about the state of the mole and Support Structure Assembly (SSA), as well as the physical properties of the Martian regolith. This included using the robotic arm to point the IDC (Instrument Deployment Camera) at the SSA during diagnostic hammering attempts to observe motion of the SSA and science tether. Images taken during these attempts revealed some motion of the SSA, but no apparent change in mole depth. At JPL, the IDS and Testbed teams re-created the hardware configuration on Mars based on limited knowledge of the mole’s state. They devised and tested techniques to use the robotic arm and cameras to accomplish previously untested activities on Mars, including imaging the HP3 , using the IDA to interact with the terrain, and using the IDA to move the SSA away from the partially-embedded mole. The team executed the more promising techniques on Mars. After diagnostic hammering on Mars, the team decided to move the SSA to gain visibility of the mole’s configuration and access to the soil around the mole. After developing the technique and practicing the maneuver in the InSight testbed, the team lifted the SSA on Mars and placed it behind the mole. This revealed a pit surrounding the now exposed mole, observations of which provided essential clues for determining the root cause of the mole’s lack of progress. The IDS and Testbed teams altered the testbed to match the situation on Mars. They devised IDA techniques to determine the Martian soil properties and assist the mole’s descent. They tested these techniques in the testbed and executed the more promising ones on Mars. These include using the robotic arm to alter the regolith near the mole and to push on the mole while it hammers. This paper discusses the anomaly resolution testing in the testbed at JPL, describes how the IDS team prepared for the anomaly recovery activities on Mars, and provides preliminary results of the efforts to assist the HP3 mole on Mars.

Kim, Junggon↗
NASA NTRS2021

Evaluation of CloudSat Radiative Kernels Using ARM and CERES Observations and ERA5 Reanalysis

Despite the widespread use of the radiative kernel technique for studying radiative feedbacks and radiative forcings, there has not been any systematic, observation-based validation of the radiative kernel method. Here, we utilize observed and reanalyzed radiative fluxes and atmospheric profiles from the Atmospheric Radiation Measurement (ARM) program and ERA5 reanalysis to assess a set of observation-based radiative kernels from CloudSat for six ARM sites. The CloudSat radiative kernels, convoluted with the ERA5 state variables, can almost perfectly reconstruct the monthly anomalies of shortwave (SW) and longwave (LW) radiative fluxes in ERA5 at the surface (SFC) and top-of atmosphere (TOA) with correlations significantly being greater than 0.95. The biases of kernel-estimated flux anomalies calculated using the ARM-observed state variables can be more than twice as large when compared with the ARM-observed surface flux anomalies and Clouds and Earth’s Radiant Energy System (CERES) observed anomalies at the TOA. Generally, clouds contribute to most (>60%) of the variance of flux anomalies at Southern Great Plain (SGP), Tropical Western Pacific (TWP), and Eastern North Atlantic (ENA), and surface albedo dominates (>69%) the variance of SW flux anomalies at North Slope of Alaska (NSA). The radiative kernels exhibit the lowest correlation (r~[0.55,0.85]) when reconstructing SFC LW flux anomalies at SGP, TWP, and ENA, whose biases are related to the possibility that the kernels may not fully capture the characteristics 47 associated with MJO and ENSO at TWP and the presence of clouds at SGP and ENA.

Radiative kernels↗
DOE OSTI2015

LES ARM Symbiotic Simulation and Observation (LASSO) Implementation Strategy

This document illustrates the design of the Large-Eddy Simulation (LES) ARM Symbiotic Simulation and Observation (LASSO) workflow to provide a routine, high-resolution modeling capability to augment the U.S. Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) Climate Research Facility’s high-density observations. LASSO will create a powerful new capability for furthering ARM’s mission to advance understanding of cloud, radiation, aerosol, and land-surface processes. The combined observational and modeling elements will enable a new level of scientific inquiry by connecting processes and context to observations and providing needed statistics for details that cannot be measured. The result will be improved process understanding that facilitates concomitant improvements in climate model parameterizations. The initial LASSO implementation will be for ARM’s Southern Great Plains site in Oklahoma and will focus on shallow convection, which is poorly simulated by climate models due in part to clouds’ typically small spatial scale compared to model grid spacing, and because the convection involves complicated interactions of microphysical and boundary layer processes.

Gustafson Jr., WI↗
DOE OSTI2019

ARM Radiosondes for Joint Polar Satellite System (JPSS) Validation Field Campaign Report

The Joint Polar Satellite System (JPSS) Radiosonde Field Campaign has been a coordinated multi-year effort involving the U.S. Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) user facility, the University of Wisconsin at Madison (UW-M), and the JPSS project to validate the National Oceanic and Atmospheric Administration (NOAA) JPSS operational satellite sounding products. In this arrangement, funding for radiosondes has been provided by the JPSS project to ARM. These radiosondes have been launched coincident with JPSS satellite overpasses at ARM field sites, with UW-M personnel coordinating the radiosonde launch schedules. This work has been a fundamental, integral, and costeffective part of both the Suomi National Polar-Orbiting Partnership (SNPP) and NOAA20 satellite validation efforts and has provided critical accuracy assessments of the temperature and water vapor soundings. It is anticipated that these effort will continue throughout the lifetime of NOAA20. JPSS validation efforts began in July 2012, with radiosonde launches targeting overpasses of the recently launched SNPP satellite from the ARM sites at the North Slope Alaska (NSA), Southern Great Plains (SGP), and Tropical West Pacific (TWP) at Manus Island, Papua New Guinea. Launches at TWP ceased in May 2014, with the closure of the site, and launches began at the Eastern North Atlantic (ENA) site in February 2015. Radiosonde launches targeting SNPP continued through January 2018 and a total of 204/443/482/190 SNPP overpasses were targeted at the ENA/NSA/SGP/TWP sites respectively. More information about the SNPP radiosonde launches is provided in Table 1.

Satellite meteorology, radiosondes, North Slope of↗
DOE OSTI2023

Collaborative Proposal: Improving Understanding of the Internal Structure and Dynamics of Deep Convection Using ARM Observations and Large Eddy Simulations (Final progress report)

This is the final technical report for the DOE Atmospheric System Research funded project entitled "Collaborative Proposal: Improving Understanding of the Internal Structure and Dynamics of Deep Convection Using ARM Observations and Large Eddy Simulations". This project addressed several science questions related to the structure and behavior of deep convective clouds in the atmosphere. It applied knowledge gained from this work to improve the deep cumulus convection parameterization in the Community Earth System Model (CESM). Specific outcomes related to the project include an improved understanding of: (1) how convective cloud environments regulate the size of thermals reaching the upper troposphere, and hence the shallow-to-deep convective transition; (2) the role of dynamic pressure forcing in thermal and convective cloud evolution; and (3) the role of vertical wind shear on the behavior of moist thermals and the transition from shallow to deep convection. Although the primary motivation of this project was to improve basic understanding of thermal dynamics in atmospheric convection, an important component of this work was using this improved understanding to modify the representation of entrainment and vertical velocity profiles in the Zhang-McFarlane cumulus parameterization used in CESM. This work also had a strong observational component, with analyses of Atmospheric Radiation Measurement (ARM) observations to characterize thermal characteristics and behavior. Observations collected during the ARM-supported CACTI field project were used with high-resolution simulations to explore environmental controls on deep convection initiation. Data from the ARM-supported MC3E field project were also used to evaluate the representation of updraft vertical velocities in the Zhang-McFarlane cumulus parameterization. This project directly supported the training of two post-doctoral researchers and led to 16 peer-reviewed published papers.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2019

ARM: KASACRCFRQC

The Ka-Band Scanning ARM Cloud Radar (KASACR) records cloud properties. ARM's scanning cloud radars are dual-frequency, dual-polarization Doppler radars mounted on a common scanning pedestal. Each pedestal includes a Ka-band radar (2kW peak power) and the deployment location determines whether the second radar is a W-band (1.7 kW peak power) or an X-band (20 kW peak power). Beamwidths for Ka-bands paired with W-bands are roughly matched at 0.3 degrees. The X-band beamwidth is approximately 1 degree. Due to the narrow antenna beamwidth, ARM’s scanning cloud radars use scanning strategies unlike typical weather radars. Rather than focusing on plan position indicator, or PPI, scans, the KASACR uses range height indicator, or RHI, scans at numerous azimuths to obtain cloud volume data. Measurements collected with the KASACR are copolar and cross-polar radar reflectivity, Doppler velocity, spectra width and spectra when not scanning, and linear depolarization ratio. KASACR data from the 2018–2019 Cloud, Aerosol, and Complex Terrain Interactions (CACTI) field campaign in Argentina are now available as b1-level products. Building on the original CACTI operational data, the b1-level products feature improved data quality resulting from extensive analyses and corrections. The data are cross-calibrated to a common point, datastreams are corrected for operational issues that occurred during the campaign, and several data quality masks and basic derived products are incorporated. For more information, read the CACTI radar b1-level processing report.

54 ENVIRONMENTAL SCIENCES↗