Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ANGLES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

Effective Darcy-Scale Contact Angles in Porous Media Imbibing Solutions of Various Surface Tensions

Surface tensions of high-salinity solutions are significantly different from those of pure water. Our objective was to develop and test a methodology to determine whether these surface-tension effects predictably alter imbibition into dry and moist porous media. Static and dynamic experiments were performed using four grades of quartz sand to determine the effects of solution salinity on imbibition. Results were quantified as apparent contact angles between the sand and three solutions (pure water, 5 molal NaNO3, n-hexane). Contact angles determined using a static method in initially air-dried sand ranged from 23° to 31°, with the same values found for both water and the NaNO3 solution. Effective contact angles determined for the air-dried sand using a dynamic method based on a modified version of the Green and Ampt model were about twice those found using the static method, averaging 45° and 62° for water and the NaNO3 solution, respectively. In pre-wetted sands, the dynamic imbibition data yielded apparent contact angles of 2° and 21° for water and the NaNO3 solution, respectively, with the latter value comparing well to a predicted value of 25° for the NaNO3 solution based solely on surface-tension contrast. The results of this study indicate that on the Darcy-scale, saline solutions appear to follow the relationship of non-zero contact angles with other miscible fluids of different surface tensions used to pre-wet the sand grains, in agreement with the macro-scale infiltration results of Weisbrod et al. [2004].

58 GEOSCIENCES↗

Magic-angle semimetals

Abstract Breakthroughs in two-dimensional van der Waals heterostructures have revealed that twisting creates a moiré pattern that quenches the kinetic energy of electrons, allowing for exotic many-body states. We show that cold atomic, trapped ion, and metamaterial systems can emulate the effects of a twist in many models from one to three dimensions. Further, we demonstrate at larger angles (and argue at smaller angles) that by considering incommensurate effects, the magic-angle effect becomes a single-particle quantum phase transition (including in a model for twisted bilayer graphene in the chiral limit). We call these models “magic-angle semimetals”. Each contains nodes in the band structure and an incommensurate modulation. At magic-angle criticality, we report a nonanalytic density of states, flat bands, multifractal wave functions that Anderson delocalize in momentum space, and an essentially divergent effective interaction scale. As a particular example, we discuss how to observe this effect in an ultracold Fermi gas.

Materials Science↗

Tunable angle-dependent electrochemistry at twisted bilayer graphene with moiré flat bands

Tailoring electron transfer dynamics across solid–liquid interfaces is fundamental to the interconversion of electrical and chemical energy. Stacking atomically thin layers with a small azimuthal misorientation to produce moiré superlattices enables the controlled engineering of electronic band structures and the formation of extremely flat electronic bands. Here, we report a strong twist-angle dependence of heterogeneous charge transfer kinetics at twisted bilayer graphene electrodes with the greatest enhancement observed near the ‘magic angle’ (~1.1°). Furthermore, this effect is driven by the angle-dependent tuning of moiré-derived flat bands that modulate electron transfer processes with the solution-phase redox couple. Combined experimental and computational analysis reveals that the variation in electrochemical activity with moiré angle is controlled by a structural relaxation of the moiré superlattice at twist angles of <2°, and ‘topological defect’ AA stacking regions, where flat bands are localized, produce a large anomalous local electrochemical enhancement that cannot be accounted for by the elevated local density of states alone.

36 MATERIALS SCIENCE↗

Angle-resolved polarimetry of hybrid perovskite emission for photonic technologies

Coupling between light and matter strongly depends on the polarization of the electromagnetic field and the nature of excitations in a material. As hybrid perovskites emerge as a promising class of materials for light-based technologies such as LEDs, LASERs, and photodetectors, it is critical to understand how their microstructure changes the intrinsic properties of the photon emission process. While the majority of optical studies have focused on the spectral content, quantum efficiency and lifetimes of emission in various hybrid perovskite thin films and nanostructures, few studies have investigated other properties of the emitted photons such as polarization and emission angle. Here, we use angle-resolved cathodoluminescence microscopy to access the full polarization state of photons emitted from large-grain hybrid perovskite films with spatial resolution well below the optical diffraction limit. In this work, mapping these Stokes parameters as a function of the angle at which the photons are emitted from the thin film surface, we reveal the effect of a grain boundary on the degree of polarization and angle at which the photons are emitted. Such studies of angle- and polarization-resolved emission at the single grain level are necessary for future development of perovskite-based flat optics, where effects of grain boundaries and interfaces need to be mitigated.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Vertical Beam Angle Control: an Advancement/Requirement in Modern Ion Implant Manufacturing

As the industry moves to the new technology nodes of 45 nm and 32 nm devices, implant angle control becomes even more crucial for consistent device performance. Commercial single wafer ion implanters are able to measure and correct the horizontal incident angle of the ion beam. But the vertical beam angle (VBA) control has become a very important parameter as well. In this work the authors demonstrate the impact of a tilt variation for a 65 nm and a 45 nm MOS transistor generated by different beam setups on one machine. Comparisons are made for each technology with a controlled angle variation of {+-}4 deg. The Vt-distribution should be reduced with better incident angle control allowing faster development of a new transistor node base line using the new VBA control technique from Axcelis.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Development of a compact electron ion coincidence analyzer using a coaxially symmetric mirror electron energy analyzer and a miniature polar-angle-resolved time-of-flight ion mass spectrometer with four concentric anodes

A compact electron ion coincidence (EICO) analyzer that uses a coaxially symmetric mirror electron energy analyzer and a miniature polar-angle-resolved time-of-flight ion mass spectrometer with four concentric anodes was developed for surface science and surface analysis. The apparatus is especially useful in the study of ion desorption stimulated by an Auger process because information on the mass, yield, desorption polar angle, and kinetic energy of ions can be obtained for the selected core-ionization-final-states or the selected Auger-final-states. The analyzer can be used also for analysis of the configuration of specific surface molecules because the desorption polar angles reflect the direction of surface bonds. The EICO analyzer was evaluated by measuring polar-angle-resolved-ion yield spectra and coincidence spectra of Auger-electron and polar-angle-resolved H{sup +} from condensed water.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Incident flux angle induced crystal texture transformation in nanostructured molybdenum films

Molybdenum films were observed to undergo a dramatic change in crystal texture orientation when the incident flux angle was varied in an oblique angle sputter deposition on amorphous substrates. Reflection high-energy electron diffraction pole figure and scanning electron microscopy were used to analyze in detail the texture orientation of the films. The normal incident deposition resulted in a fiber texture film with the minimum energy (110) crystal plane parallel to the substrate surface. A (110)[110] biaxial texture was observed for the samples grown with low incident angles of less than 45 Degree-Sign , with respect to the surface normal. On the other hand, for an oblique angle deposition of larger than 60 Degree-Sign , a (111)[112] biaxial texture was observed and appeared to be consistent with a zone T structure where the geometrically fastest growth [001] direction of a crystal plays a dominant role in defining the texture. We argue that a structural transition had occurred when the incident flux was varied from near normal incidence to a large angle.

36 MATERIALS SCIENCE↗

Spectroscopic refractometer for transparent and absorbing liquids by reflection of white light near the critical angle

We propose and evaluate a spectroscopic refractometer device to measure the refractive index dispersion of transparent and absorbing solutions. The angle-dependent reflectivity of a white beam of light in an internal reflection configuration around the critical angle is spectrally analyzed. The refractive index in a wavelength range from 400 nm to 900 nm is obtained from the angle-reflectivity curve around the critical angle at each wavelength. The device does not use angle scanning mechanisms, decreasing considerably the complexity of the instrument in comparison to previous proposals. As a result, the measurements are obtained relatively fast. Nevertheless, a good experimental resolution in refractive index of about {Delta}n Almost-Equal-To 10{sup -4} at all the wavelengths is achieved in the case of transparent solutions. The calibration procedure of the device is discussed in detail. We also present measurements of the refractive index dispersion of rhodamine 6G-methanol solutions, which has a strong absorption band in the visible spectra.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

'Abnormal' angle response curves of TW/Rs for near zero tilt and high tilt channeling implants

Angle control has been widely accepted as the key requirement for ion implantation in semiconductor device processing. From an ion implanter point of view, the incident ion direction should be measured and corrected by suitable techniques, such as XP-VPS for the VIISta implanter platform, to ensure precision ion placement in device structures. So called V-curves have been adopted to generate the wafer-based calibration using channeling effects as the Si lattice steer ions into a channeling direction. Thermal Wave (TW) or sheet resistance (Rs) can be used to determine the minimum of the angle response curve. Normally it is expected that the TW and Rs have their respective minima at identical angles. However, the TW and Rs response to the angle variations does depend on factors such as implant species, dose, and wafer temperature. Implant damage accumulation effects have to be considered for data interpretation especially for some 'abnormal' V-curve data. In this paper we will discuss some observed 'abnormal' angle responses, such as a) TW/Rs reverse trend for Arsenic beam, 2) 'W' shape of Rs Boron, and 3) apparent TW/Rs minimum difference for high tilt characterization, along with experimental data and TCAD simulations.

36 MATERIALS SCIENCE↗

Acquisition and analysis of angle-beam wavefield data

Angle-beam ultrasonic testing is a common practical technique used for nondestructive evaluation to detect, locate, and characterize a variety of material defects and damage. Greater understanding of the both the incident wavefield produced by an angle-beam transducer and the subsequent scattering from a variety of defects and geometrical features is anticipated to increase the reliability of data interpretation. The focus of this paper is on acquiring and analyzing propagating waves from angle-beam transducers in simple, defect-free plates as a first step in the development of methods for flaw characterization. Unlike guided waves, which excite the plate throughout its thickness, angle-beam bulk waves bounce back and forth between the plate surfaces, resulting in the well-known multiple “skips” or “V-paths.” The experimental setup consists of a laser vibrometer mounted on an XYZ scanning stage, which is programmed to move point-to-point on a rectilinear grid to acquire waveform data. Although laser vibrometry is now routinely used to record guided waves for which the frequency content is below 1 MHz, it is more challenging to acquire higher frequency bulk waves in the 1–10 MHz range. Signals are recorded on the surface of an aluminum plate that were generated from a 5 MHz, 65° refracted angle, shear wave transducer-wedge combination. Data are analyzed directly in the x-t domain, via a slant stack Radon transform in the τ-p (offset time-slowness) domain, and via a 2-D Fourier transform in the ω-k domain, thereby enabling identification of specific arrivals and modes. Results compare well to those expected from a simple ray tracing analysis except for the unexpected presence of a strong Rayleigh wave.

42 ENGINEERING↗

Dual-angle, self-calibrating Thomson scattering measurements in RFX-MOD

In the multipoint Thomson scattering (TS) system of the RFX-MOD experiment the signals from a few spatial positions can be observed simultaneously under two different scattering angles. In addition the detection system uses optical multiplexing by signal delays in fiber optic cables of different length so that the two sets of TS signals can be observed by the same polychromator. Owing to the dependence of the TS spectrum on the scattering angle, it was then possible to implement self-calibrating TS measurements in which the electron temperature T{sub e}, the electron density n{sub e} and the relative calibration coefficients of spectral channels sensitivity C{sub i} were simultaneously determined by a suitable analysis of the two sets of TS data collected at the two angles. The analysis has shown that, in spite of the small difference in the spectra obtained at the two angles, reliable values of the relative calibration coefficients can be determined by the analysis of good S/N dual‑angle spectra recorded in a few tens of plasma shots. This analysis suggests that in RFX-MOD the calibration of the entire set of TS polychromators by means of the similar, dual-laser (Nd:YAG/Nd:YLF) TS technique, should be feasible.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Banded structures in electron pitch angle diffusion coefficients from resonant wave-particle interactions

Electron pitch angle (D{sub αα}) and momentum (D{sub pp}) diffusion coefficients have been calculated due to resonant interactions with electrostatic electron cyclotron harmonic (ECH) and whistler mode chorus waves. Calculations have been performed at two spatial locations L = 4.6 and 6.8 for electron energies ≤10 keV. Landau (n = 0) resonance and cyclotron harmonic resonances n = ±1, ±2, … ±5 have been included in the calculations. It is found that diffusion coefficient versus pitch angle (α) profiles show large dips and oscillations or banded structures. The structures are more pronounced for ECH and lower band chorus (LBC) and particularly at location 4.6. Calculations of diffusion coefficients have also been performed for individual resonances. It is noticed that the main contribution of ECH waves in pitch angle diffusion coefficient is due to resonances n = +1 and n = +2. A major contribution to momentum diffusion coefficients appears from n = +2. However, the banded structures in D{sub αα} and D{sub pp} coefficients appear only in the profile of diffusion coefficients for n = +2. The contribution of other resonances to diffusion coefficients is found to be, in general, quite small or even negligible. For LBC and upper band chorus waves, the banded structures appear only in Landau resonance. The D{sub pp} diffusion coefficient for ECH waves is one to two orders smaller than D{sub αα} coefficients. For chorus waves, D{sub pp} coefficients are about an order of magnitude smaller than D{sub αα} coefficients for the case n ≠ 0. In case of Landau resonance, the values of D{sub pp} coefficient are generally larger than the values of D{sub αα} coefficients particularly at lower energies. As an aid to the interpretation of results, we have also determined the resonant frequencies. For ECH waves, resonant frequencies have been estimated for wave normal angle 89° and harmonic resonances n = +1, +2, and +3, whereas for whistler mode waves, the frequencies have been calculated for angle 10° and Landau resonance. Further, in ECH waves, the banded structures appear for electron energies ≥1 keV, and for whistler mode chorus waves, structures appear for energies >2 keV at L = 4.6 and above 200 eV for L = 6.8. The results obtained in the present work will be helpful in the study of diffusion curves and will have important consequences for diffuse aurora and pancake distributions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The role of incidence angle in the laser ablation of a planar target

The effect of the laser ray incidence angle on the mass ablation rate and ablation pressure of planar inertial confinement fusion (ICF) targets is explored. In this work, a modified version of the textbook model of laser ablation is used to demonstrate that the mass ablation rate and ablation pressure scale with the 4/3 and 2/3 power of the cosine of the laser ray incidence angle relative to the target normal. Using an idealized planar model of ablation, it is demonstrated that constant irradiance is insufficient to produce similar velocities of a target when comparing cases driven at different incidence angles. Additionally, the effect of the incidence angle on the absorption fraction is demonstrated and it is shown that a longer duration is needed to achieve maximum absorption for greater angles. This further affects the mass ablation rate and ablation pressure in the first nanosecond of ablation. Here these results, when extrapolated, may provide insight into the variation of drive conditions encountered due to incidence in polar direct drive ICF.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Technique for inferring angle change as a function of time for high-current electron beams using a dose-rate monitor array

Intense electron beams striking a high-atomic number target produce high-output pulsed photon fluxes for flash x-ray experiments. Without an external guide field, such beams are subject to the dynamics of high-current electron beam propagation, including changes to electron trajectories either from self-fields or from development of beam instabilities. The bremsstrahlung output (dose-rate) scales approximately as IV x , where I is the beam current, V the electron energy, and x is in the range 2.0–2.65 and depends upon the electron angle on the converter. Using experimental beam data (dose-rate, I and V), this equation can be solved for x, a process known as “inverting the radiographer’s equation.” Inversion methods that rely on thermoluminescent dosimeters, which are time-integrated, yield no information about evolution of the electron beam angle in time. We propose here an inversion method that uses several dose-rate monitors at different angles with respect to the beam axis. By measuring dose-rates at different angles, one can infer the time-dependent beam voltage and angle. Furthermore, this method compares well with estimates of corrected voltage and results in a self-consistent picture of beam dynamics. Techniques are demonstrated using data from self-magnetic pinch experiments at the RITS-6 facility at Sandia National Laboratories.

47 OTHER INSTRUMENTATION↗

Computational investigation of incident ion angles and material erosion at rough graphite and silicon carbide divertor surfaces

We present a computational investigation of the dependence of material erosion on the incident ion angle at rough graphite and silicon carbide divertor surfaces. Ion angle distributions (IADs) for D plasmas at NSTX-U and DIII-D divertors were calculated by an equation-of-motion model that traces the ion trajectories in the sheath. Then, the effective sputtering yields and ion shadowed area fractions were calculated by a Monte Carlo micro-patterning and roughness code that applied the calculated IADs to surface topographic data that were obtained from optical confocal microscopy of rough graphite and SiC divertor surfaces from NSTX-U and DIII-D experiments. The calculations found that the effective sputtering yields, the sputtering pattern, and the shadowed area are determined by the detailed surface topology rather than the root mean square roughness R RMS , which represents deviations from a flat surface. The suppression of the effective sputtering yields for rough surfaces compared to the yield for a smooth surface was accounted for by the change of the mean local incident ion angle (LIIA) (θ'). The mean surface inclination angle distribution (SIAD) (δ) was found to be a useful parameter to estimate the LIIA from the calculated IADs. We report global empirical formulas for the mean LIIA and fraction of the area shadowed from the main ions for D plasmas for rough surfaces with B-field incident angles α = 85°–89° as a function of the mean SIAD (δ). We propose the use of the mean LIIA (θ') to estimate the sputtering yield for rough surfaces from the angular dependence of the sputtering yield.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A scanning angle energy-dispersive X-ray diffraction technique for high-pressure structure studies in diamond anvil cells

A scanning angle diffraction technique with an energy-dispersive solid-state detector (SSD) and white synchrotron radiation has been developed for high-pressure structure studies in diamond anvil cells (DACs). This technique is similar to the CAESAR technique [Y. Wang, T. Uchida, R. Von Dreele, M.L. Rivers, N. Nishiyama, K. Funakoshi, A. Nozawa, and H. Kaneko, A new technique for angle-dispersive powder diffraction using an energy-dispersive setup and synchrotron radiation, J. Appl. Cryst. 37 (2004), p. 947] developed for large-volume presses, but extended to DAC applications with high spatial resolution. The main feature of the technique is the well-defined collimation in the beam path to the detector, which improves the signal-to-noise ratio significantly, compared to routine monochromatic angle-dispersive powder diffraction with area detectors. This is particularly useful and essential for low-scattering materials and for amorphous and liquid diffraction/scattering studies using DACs. Data collected from crystalline and amorphous samples in DACs show that a coarse 2{theta} scan (0.1--0.2{sup o} for crystals and 0.5{sup o} for amorphous structure) is sufficient to obtain reasonable diffraction resolution. The scanning angle energy-dispersive X-ray diffraction technique provides angle-dispersive X-ray diffraction (ADXD) data in multiple energies. Such multi-energy ADXD data carry much more information than regular single-energy ADXD, which could provide site-specific atomic structure information for full structure refinement.

43 PARTICLE ACCELERATORS↗

EFFECTS OF REFRACTION ON ANGLES AND TIMES OF ARRIVAL OF SOLAR RADIO BURSTS

Solar type III and type II radio bursts suffer severe bending and group delay due to refraction while escaping from the source where the refractive index {mu} can be as low as {approx}0 to the observer where {mu} {approx} 1. These propagation effects can manifest themselves as errors in the observed directions and times of arrival at the telescope. We describe a ray-tracing technique that can be used to estimate these errors. By applying this technique to the spherically symmetric density model derived using the data from the WIND/Waves experiment, we show that (1) the fundamental and harmonic emissions escape the solar atmosphere in narrow cones (at 625 kHz the widths of these escape cones are {approx}1.{sup 0}1 and {approx}8{sup 0}, respectively), (2) the errors in the angles as well as the times of arrival increase monotonically with the angle of arrival (at 625 kHz these errors are 0.{sup 0}26 and {approx}17.2 s for the fundamental and {approx}0.{sup 0}52 and {approx}7.6 s for the harmonic at the maximum possible angles of arrival of {approx}0.{sup 0}55 and {approx}4{sup 0}, respectively), and (3) the lower the frequencies are, the higher the errors in both the angles and times of arrival are. This implies that at 625 kHz the measured arrival angles and arrival times of the fundamental and harmonic are off by {approx}50% and {approx}13%, and {approx}3.4% and {approx}1.5%, respectively.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

STELLAR ORBITAL STUDIES IN NORMAL SPIRAL GALAXIES. I. RESTRICTIONS TO THE PITCH ANGLE

We built a family of non-axisymmetric potential models for normal non-barred or weakly barred spiral galaxies as defined in the simplest classification of galaxies: the Hubble sequence. For this purpose, a three-dimensional self-gravitating model for the spiral arm PERLAS is superimposed on the galactic axisymmetric potentials. We analyze the stellar dynamics varying only the pitch angle of the spiral arms, from 4 Degree-Sign to 40 Degree-Sign for an Sa galaxy, from 8 Degree-Sign to 45 Degree-Sign for an Sb galaxy, and from 10 Degree-Sign to 60 Degree-Sign for an Sc galaxy. Self-consistency is indirectly tested through periodic orbital analysis and through density response studies for each morphological type. Based on ordered behavior, periodic orbit studies show that, for pitch angles up to approximately 15 Degree-Sign , 18 Degree-Sign , and 20 Degree-Sign for Sa, Sb, and Sc galaxies, respectively, the density response supports the spiral arms' potential, a requisite for the existence of a long-lasting large-scale spiral structure. Beyond those limits, the density response tends to ''avoid'' the potential imposed by maintaining lower pitch angles in the density response; in that case, the spiral arms may be explained as transient features rather than long-lasting large-scale structures. In a second limit, from a phase-space orbital study based on chaotic behavior, we found that for pitch angles larger than {approx}30 Degree-Sign , {approx}40 Degree-Sign , and {approx}50 Degree-Sign for Sa, Sb, and Sc galaxies, respectively, chaotic orbits dominate the all phase-space prograde region that surrounds the periodic orbits sculpting the spiral arms and even destroying them. This result seems to be in good agreement with observations of pitch angles in typical isolated normal spiral galaxies.

79 ASTRONOMY AND ASTROPHYSICS↗