Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “AGGLOMERATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

Impact of physicochemical properties of engineered fullerenes on key biological responses

Engineered fullerenes are widely integrated into several commercial and medical products and are now also being recognized as byproducts of many industrial activities. For most applications fullerenes have to be chemically modified. Surface modification of fullerenes can potentially impact their effect on biosystems. The purpose of the current study was to establish criteria to correlate fullerene structure to biological responses. We report studies of cellular responses induced by three different types of fullerenes that provide varying chemical and physical properties such as electronic behavior, solubility, and degree of agglomeration. Using a systematic and multipronged approach for material characterization and employing critical biological endpoints, we determined the impact of the physicochemical properties of fullerenes on cellular interactions. We examined the ability of these fullerenes to regulate intracellular oxidative stress, necrosis and apoptosis in human monocytic THP1 cells. Results indicate that the carboxylate derivatization of fullerenes was the determining factor in their ability to induce apoptosis. In contrast, the dispersion characteristics of fullerenes were found to be more relevant when considering their redox function. We also established a significant role for functionalization-dependent fullerene-regulation of the caspase proteases in the elicited responses. In addition, there was a notable increase in the level of several anti-oxidant enzymes. Collectively, the results clearly indicate that the physicochemical properties of fullerenes significantly influence the elicited biological response, thus impacting future applications. This study is an initial effort to lay the groundwork for routine correlation and predictive analysis on engineered fullerenes, thus expediting their use.

60 APPLIED LIFE SCIENCES↗

Structural study of graphite materials prepared by HTT of unburned carbon concentrates from coal combustion fly ashes

Unburned carbon concentrates with different mineral matter contents were obtained from coal combustion fly ashes by an oil agglomeration procedure. The concentrates were then heated in the temperature interval 1800-2700{sup o}C for the purpose of exploring their ability to graphitize. The influence of the treatment temperature and mineral matter of the unburned carbon on the structural characteristics of the materials prepared was studied. The interlayer spacing, d{sub 002}, and crystallite sizes along the c-axis, L{sub c}, and the {alpha}-axis, L{sub a}, calculated from X-ray diffractometry (XRD) as well as the relative intensity of the Raman D-band, I{sub D}/I{sub t}, were used to assess the degree of structural order of the materials. Graphite materials with structural characteristics comparable to those of other oil-derived synthetic graphites were prepared from the unburned carbon concentrates at temperatures {>=}2400{sup o}C. It was also observed that more-ordered materials were obtained from the unburned carbon concentrates with higher mineral matter content. The influence of the mineral matter on the graphitization of the unburned carbon concentrates is the result of two countereffects, thus limiting its extent. On the one hand, the lateral coalescence of the crystallites is preferentially promoted. Reasonably good linear correlations were attained between the mineral matter of the unburned carbon concentrate and the XRD parameter L{sub a} of the materials. However, on the other, this coalescence also facilitates the flattening of the pores, thus decreasing the temperature at which their breakage occurs. As a consequence, from this point on, the structural evolution of the materials with increasing mineral matter is only noticeable by the slow vegetative growth of the crystallites along the a-axis. 40 refs., 2 figs., 3 tabs.

01 COAL, LIGNITE, AND PEAT↗

Multicycle study on chemical-looping combustion of simulated coal gas with a CaSO{sub 4} oxygen carrier in a fluidized bed reactor

The cyclic test of a CaSO{sub 4}-based oxygen carrier (natural anhydrite) in alternating reducing simulated coal gas and oxidizing conditions was performed at 950{degree}C in a fluidized bed reactor at atmospheric pressure. A high concentration of CO{sub 2} was obtained in the reduction. The H{sub 2} and CO conversions and CO{sub 2} yield increased initially and final decreased significantly. The release of SO{sub 2} and H{sub 2}S during the cyclic test was found to be responsible for the decrease of reactivity of a CaSO{sub 4} oxygen carrier. The oxygen carrier conversion after the reduction reaction decreased gradually in the cyclic test. Through the comparison of mass-based reaction rates as a function of mass conversion at typical cycles, it was also evident that the reactivity of a CaSO{sub 4} oxygen carrier increased for the initial cycles but finally decreased after around 15 cycles. X-ray diffraction analysis revealed that the presence and intensity of the reduction sulfur species was in accordance with the results of gas conversion. The content of CaO was higher than expected, suggesting the formation of SO{sub 2} and H{sub 2}S during the cycles. Surface morphology analysis demonstrates that the natural anhydrite particle surface varied from impervious to porous after the cyclic test. It was also observed that the small grains on the surface of the oxygen carrier sintered in the cyclic tests. Energy-dispersive spectrum analysis also demonstrated the decrease of oxygen intensity after reduction, and CaO became the main component after the 20th oxidation. Pore structure analysis suggested that the particles agglomerated or sintered in the cyclic tests. The possible method for sulfur mitigation is proposed. Finally, some basic consideration on the design criteria of a CLC system for solid fuels using a CaSO{sub 4} oxygen carrier is discussed by the references and provides direction for future work. 49 refs., 10 figs., 5 tabs.

01 COAL, LIGNITE, AND PEAT↗

Iron Aerogel and Xerogel Catalysts for Fischer-Tropsch Synthesis of Diesel Fuel

Iron aerogels, potassium-doped iron aerogels, and potassium-doped iron xerogels have been synthesized and characterized and their catalytic activity in the Fischer-Tropsch (F-T) reaction has been studied. Iron aerogels and xerogels were synthesized by polycondensation of an ethanolic solution of iron(III) chloride hexahydrate with propylene oxide which acts as a proton scavenger for the initiation of hydrolysis and polycondensation. Potassium was incorporated in the iron aerogel and iron xerogel by adding aqueous K{sub 2}CO{sub 3} to the ethanolic solutions of the Fe(III) precursor prior to addition of propylene oxide. Fischer-Tropsch activities of the catalysts were tested in a fixed bed reactor at a pressure of 100 psi with a H{sub 2}:CO ratio of 2:1. Iron aerogels were found to be active for F-T synthesis, and their F-T activities increased on addition of a K containing promoter. Moessbauer spectroscopic data are consistent with an open, nonrigid iron(III) aerogel structure progressing to an iron carbide/metallic iron catalyst via agglomeration as the F-T synthesis proceeds in the course of a 35 h fixed bed reaction test.

01 COAL, LIGNITE, AND PEAT↗

Experimental (XAS STEM TPR and XPS) and Theoretical (DFT) Characterization of Supported Rhenium Catalysts

A high surface area supported Re-based catalyst, fundamental to heterogeneous catalysis, is studied in the oxidic and reduced states using a combination of experimental (XAFS, STEM, TPR, and XPS) and theoretical (DFT and X-ray spectroscopy simulations) approaches. In the calcined dried catalyst, the Re species is present as an isolated trioxo(oxoaluminate) Re(VII) species. The temperature at which the Re undergoes reduction is a function of the hydrogen partial pressure and temperature ramp rate, but the maximum rate of reduction occurs in the range 300-400 C. Following reduction at 500 or 700 C in dry hydrogen, the Re is present as a mixture of species: unreduced trioxo(oxoaluminate) Re(VII) species, Re nanoclusters, and isolated Re atoms. By using a multifaceted approach, it is apparent that the majority species is an isolated Re adatom bound to the alumina support. DFT calculations identify several likely adsorption sites for these Re adatoms on the [110] surface of {gamma}-Al{sub 2}O{sub 3}. The final extended X-ray absorption fine structure (EXAFS) model taking into account these three species is used to identify the dominant adsorption site for Re on the alumina surface. FEFF8 X-ray absorption near-edge spectroscopy (XANES) calculations of unsupported and alumina-supported Re nanoclusters provide interpretation of the shape and edge position of the Re L{sub 3}-edge XANES after reduction. The presence of moisture during reduction stronly affects the mobility of the Re on the alumina leading to agglomeration. Subsequent air exposure of a reduced catalyst readily reoxidizes the reduced Re. The power of using a combination of analysis tools provides insight into the behavior of dispersed Re on supported alumina under oxidizing and reducing conditions relevant to heterogeneous catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nonhydrolytic Synthesis and Electronic Structure of Ligand-Capped CeO2-.delta. and CeOCl Nanocrystals

A novel and versatile nonhydrolytic approach is developed for the synthesis of ligand-passivated CeO2-5 and CeOCl nanocrystals soluble in nonpolar organic solvents based on the condensation of cerium alkoxides with cerium halides. The alkyl group on the metal alkoxides and the specific halide used in the synthesis are observed to considerably influence the composition and size of the obtained nanocrystals. The obtained nanocrystals are <3 nm in diameter and, owing to their surface-capping groups, yield homogeneous and clear solutions in nonpolar organic solvents with no evidence of agglomeration. The electronic structure of the obtained CeO2-5 nanocrystals has been studied using optical absorption spectroscopy and near-edge X-ray absorption fine structure spectroscopy at Ce M- and O K-edges. The latter technique provides detailed insight into the metal valence, geometric structure, and atom-projected density of states in these nanocrystals. Finally, this synthesis method has been expanded to explore the doping of La to form solid-solution CexLa1-xO2-5 nanocrystals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of RuOxHy Particles Size on Particle Aging in Methanol

The aging properties of two different commercial PtRu black catalysts, Johnson-Matthey HiSpec6000 and Tanaka TEC90110, were observed in 1 M trifluoromethanesulfonic acid with 0.3 M methanol as a function of both time and potential cycling. Cu underpotential deposition, cyclic voltammetry, and x-ray absorption spectroscopy, using both the extended x-ray absorption fine structure and {Delta}{mu} x-ray absorption near-edge spectroscopy analysis techniques, on samples after potential cycling between 0.02 and 0.8 V, revealed the PtRu aging mechanism and offer an explanation of why the two catalysts age differently. The Tanaka catalyst had relatively large RuO{sub x}H{sub y} islands on the surface and underwent little dissolution and agglomeration after 40 cycles. This had little detrimental effect on the CO oxidation properties as seen in the CO stripping data, and therefore, this catalyst can be expected to be relatively more tolerant to poisoning in direct methanol fuel cells. The Johnson-Matthey catalyst, on the other hand, was found to have much smaller Ru islands initially, underwent more Ru dissolution/agglomeration, and showed definite signs of an increase in Ru island size and partial oxidation to RuO{sub x}H{sub y}. The CO stripping data for this catalyst show a significant increase in onset potential with aging, reflecting a change from the predominant bifunctional to ligand-effect mechanism for the CO oxidation.

10 SYNTHETIC FUELS↗

Carbon nanofibre reinforcement of soft materials

In elastomeric matrices carbon nanofibres are found to be twenty times more effective than carbon black as a reinforcing filler. In hard matrices, by contrast, reinforcement is minimal. Tensile and dynamic mechanical tests were performed to elucidate the mechanism of reinforcement in order to explain the superior performance in soft matrices. Small-angle neutron scattering and ultra-small-angle X-ray scattering were used to quantify filler morphology, which turns out to be the key factor that limits reinforcement potential. The presence of fractal cluster formed by agglomeration of the nanofibres reduces the effective aspect ratio of the nanotubes. Clustering, however, introduces a new reinforcement mechanism based on elastic deformation of the fibre clusters. This mechanism is operative in soft matrices but not in hard matrices, thus explaining the enhanced performance in soft matrices.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Enhancement of switching speed by laser-induced clustering of nanoparticles in magnetic fluids

The switching speed of magnetic fluids was investigated by using laser light of different power densities as well as incandescent light. It was found that the switching speed exhibited a strong dependence on incident power density and there existed an optimum value at which the fastest switching operation was achieved. In addition, it was revealed that the clustering of magnetic nanoparticles, which became resolved at large power densities, resulted in a rapid agglomeration of nanoparticles when a magnetic field was applied. It is suggested that the optical trapping force of the laser beam is responsible for the formation of clusters.

36 MATERIALS SCIENCE↗

Dopant Activation and Defect Analysis of Ultra-Shallow Junctions Made by Gas Cluster Ion Beams

A long-standing problem in the fabrication of junctions by ion implantation is the enhanced diffusion caused by interstitial agglomeration and dissolution on annealing. Another side effect is residual damage that leads to junction leakage. The gas cluster ion beam technique (GCIB) offers a means of introducing dopant atoms without the creation of interstitials due to the low energy non-ballistic nature of the individual atoms and the localized thermal spike associated with the collision event between the large cluster and the silicon surface. We have employed cluster ion beams to infuse B into Si substrates to fabricate ultra-shallow junctions. Various annealing techniques were used to investigate GCIB B activation. We find that annealing at temperatures around 950 deg. C results in profiles that do not exhibit the extended tail characteristic of enhanced diffusion. This is in contrast to profiles in ion implanted samples, which inevitably result in enhanced diffusion. For laser and flash anneal, because the time scale of process is short, multiple anneal passes are needed in order to achieve low sheet resistance with little diffusion. We have shown that control of interfacial and surface smoothness is critical in improving junction characteristics.

36 MATERIALS SCIENCE↗

Influence of a Transient Hexagonal Phase on the Microstructure and Morphological Stability of NiSi Films

The morphological stability of NiSi is investigated when 40% of Si is mixed into an as deposited 10 nm Ni film. When annealing at 3?C/s, scanning electron microscopy images and in situ sheet-resistance measurements show that NiSi agglomeration is delayed by more than 100?C. In situ x-ray diffraction reveals that NiSi grows from an unusual transient hexagonal ?-nickel-silicide phase. The significant improvement of the NiSi film's morphological stability can be related to its microstructure, with large grains and a strong texture. This peculiar microstructure is compared to the microstructure of the ?-nickel-silicide precursor by electron backscattering diffraction and pole figures.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

An investigation of silicon carbide-water nanofluid for heat transfer applications.

Thermal conductivity and mechanical effects of silicon carbide nanoparticles uniformly dispersed in water were investigated. Mean size of SiC particles was 170 nm with a polydispersity of {approx}30% as determined from small-angle x-ray scattering and dynamic light scattering techniques. Room temperature viscosity of the nanofluids ranged from 2 to 3 cP for nominal nanoparticle loadings 4-7 vol %. On a normalized basis with water, viscosity of the nanofluids did not significantly change with the test temperature up to 85 C. Optical microscopy of diluted nanofluid showed no agglomeration of the nanoparticles. Thermal conductivity of the fluid was measured as a function of the nominal nanoparticle loading ranging from 1 to 7 vol %. Enhancement in thermal conductivity was approximately 28% over that of water at 7 vol % particle loadings under ambient conditions. Enhancements in thermal conductivities for the nanofluids with varying nanoparticle loadings were maintained at test temperatures up to 70 C. Results of thermal conductivity have been rationalized based on the existing theories of heat transfer in fluids. Implications of using this nanofluid for engineering cooling applications are discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Phase transitions in Ge-Sb phase change materials

Thin films of the phase change material Ge-Sb with Ge concentrations between 7.3 and 81.1 at. % were deposited by cosputtering from elemental targets. Their crystallization behavior was studied using time-resolved x-ray diffraction, Auger electron spectroscopy, differential scanning calorimetry, x-ray reflectivity, profilometry, optical reflectivity, and resistivity versus temperature measurements. It was found that the crystallization temperature increases with Ge content. Calculations of the glass transition temperature (which is a lower limit for the crystallization temperature T{sub x}) also show an increase with Ge concentration closely tracking the measured values of T{sub x}. For low Ge content samples, Sb x-ray diffraction peaks occurred during a heating ramp at lower temperature than Ge diffraction peaks. The appearance of Ge peaks is related to Ge precipitation and agglomeration. For Ge concentrations of 59.3 at. % and higher, Sb and Ge peaks occurred at the same temperature. Upon crystallization, film mass density and optical reflectivity increase as well as electrical contrast (ratio of resistivity in amorphous phase to crystalline phase) all showed a maximum for the eutectic alloy (14.5 at. % Ge). For the alloy with 59.3 at. % Ge there was very little change in any of these parameters, while the alloy with 81.1 at. % Ge behaved opposite to a typical phase change alloy and showed reduced mass density and reflectivity and increased resistivity.

36 MATERIALS SCIENCE↗

Cluster size effects on sintering, CO adsorption, and implantation in Ir/SiO{sub 2}

A series of planar model catalysts have been prepared via deposition of Ir{sub n}{sup +} on thermally grown amorphous SiO{sub 2}/Si(100) and ion scattering spectroscopy was used to probe surface structure as a function of cluster size, impact energy, and surface temperature. Deposition of Ir{sub 2} or Ir{sub 10} at low energies and room temperature results in stable clusters forming one- or two-dimensional single layer islands on the oxide surface. Heating the samples to 750 K leads to agglomeration, forming multilayer structures on the surface. Ir{sub 1} deposited under similar conditions sinters into large clusters at room temperature. Deposition at 110 K at least partially stabilizes the Ir atoms with respect to diffusion and sintering. At higher deposition energies, partial implantation into the surface is observed, but this appears to be insufficient to stabilize the clusters against sintering at elevated temperature. At low temperatures, substrate-mediated adsorption of CO is found to be highly efficient, leading to near saturation coverages of CO bound atop the Ir{sub n} clusters. The CO can be removed by careful He{sup +} sputtering. The deposition/binding behavior of Ir{sub n} on SiO{sub 2} is quite different from Ir{sub n}/TiO{sub 2}(110), for which the clusters bind in three-dimensional morphology, starting at Ir{sub 5}. That system also shows substrate-mediated adsorption of CO, but the CO preferentially binds at the periphery of the clusters rather than on top.

36 MATERIALS SCIENCE↗

Monolayer graphene growth on sputtered thin film platinum

It is demonstrated that sputtered thin film platinum (Pt) can be used as a catalytic metal for graphene growth on metal. During the crystallization annealing, the sputtered Pt is crystallized mostly into Pt (111) orientation, maintaining excellent surface roughness with no sign of agglomeration. The relatively lower carbon solubility in Pt and the good surface roughness of the thin film Pt enable us to form a uniform monolayer graphene on Pt over the entire region of the thin film Pt/SiO{sub 2}/Si substrate by carbon dissolution and segregation method processed in a methane ambient. The monolayer graphene grown on Pt has been successfully transferred to SiO{sub 2}/Si substrate by simple wet etching of Pt. The results of Raman spectroscopic and scanning tunneling microscopic measurements of the synthesized graphene layer are presented.

36 MATERIALS SCIENCE↗

IMAGING HIGH SPEED PARTICLES IN EXPLOSIVE DRIVEN BLAST WAVES

This research describes a new application of a commercially available particle image velocimetry (PIV) instrument adapted for imaging particles in a blast wave. Powder was dispersed through the PIV light sheet using a right circular cylindrical charge containing aluminum powder filled in the annular space between the explosive core and exterior paper tube wall of the charge. Images acquired from each shot showed particle agglomeration and unique structures with the smaller particle diameters having developed structured appearances.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗