Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “39”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 505 records · Page 28

Effects of copper excess and copper deficiency on the structural and electrical properties of bulk Cu{sub x}SnSe{sub 3} with x=1.6–2.2

Effects of the Cu variation on the morphological, structural, and electrical properties of bulk Cu{sub x}SnSe{sub 3} (CTSe) with x=1.6–2.2 have been investigated. Dense CTSe pellets with grains of 3–4 µm were obtained after sintering at 550 °C. All CTSe pellets showed a dominant p-type behavior. CTSe at x=2.0 with a hole concentration (n{sub p}) of 1.02×10{sup 18} cm{sup −3} and Hall mobility (μ) of 225 cm{sup 2}/V/s had a highest conductivity (σ) of 39 S/cm. CTSe at x=1.6 with n{sub p} of 5.0×10{sup 17} cm{sup −3} and of 11 cm{sup 2}/V/s had a lowest of 0.90 S/cm. The explanation, based upon vacancies and antisite defects, for the changes in electrical property with the Cu content is supported by the data from lattice parameter. The study in bulk properties of CTSe and its defects is helpful for selecting the suitable absorber composition to fabricate thin film solar cells. - Graphical abstract: Cu{sub 2}SnSe{sub 3} is an absorber candidate for solar cells. The Cu stoichiometry on electrical properties, which is important for CIGS and CZTS, is investigated and the Cu-deficiency composition is recommended. - Highlights: • Cu{sub x}SnSe{sub 3} (CTSe) bulks with 1.6≤x≤2.2 were prepared by reactive sintering. • Cu{sub 2}SnSe{sub 3} with n{sub p} of 1.02×10{sup 18} cm{sup −3} and μ of 225 cm{sup 2}/V/s had highest σ of 39 S/cm. • Cu{sub 1.6}SnSe{sub 3} with n{sub p}=5.0×10{sup 17} cm{sup −3} and μ=11 cm{sup 2}/V/s had lowest σ=0.90 S/cm. • Lower n{sub p} at CTSe at x=1.6 is related to the formation of the Sn-to-Cu defect. • The drop in n{sub p} for CTSe at x=2.2 indicates V{sub Sn}{sup 4−} dominates over Cu{sub Sn}{sup 3−} defect.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Rare earth silicates and germanates crystallizing in the wadeite and related structure types

Single crystals of six new alkali lanthanide silicates and germanates were synthesized via the flux growth method. A2CeSi3O9 (A = Rb, Cs) and Cs2CeGe3O9 crystallize in the Wadeite structure with space group P63/m and lattice parameters a = 7.1950(2) Å and c = 10.5109(3) Å for the Rb analogue. K2CeSi3O9 crystallizes in a previously unobserved monoclinic distortion of the Wadeite structure with space group P21/n and lattice parameters a = 7.0801(2) Å, b = 10.458(2) Å, c = 12.238(2) Å and β = 90.07(3)°. Finally, Cs8Dy2Ge16O39 and Cs8Dy2Ge16O38F2 crystallize in two new structure types that are related to each other and to the Wadeite structure. Cs8Dy2Ge16O39 crystallizes in the monoclinic space group P2/c with lattice parameters a = 12.4054(3) Å, b = 7.4310(2) Å, c = 24.5761(6) Å, and β = 90.8849(16)° and Cs8Dy2Ge16O38F2 crystallizes in the orthorhombic space group Pnn2 with lattice parameters a = 12.3489(4) Å, b = 12.4805(5) Å, and c = 7.3802(3) Å. The synthesis and structure of the six compounds are reported and the crystallochemical reasons for the formation of each structure are discussed.

nuclear, materials and chemistry by design, synthe↗

Bismuth borate zinc glass braze for bonding sapphire in air

Highlights: • Sapphire was brazed with a novel 50Bi{sub 2}O{sub 3}–40B{sub 2}O{sub 3}–10ZnO (mol.%) glass at temperatures of 600–700 °C for 20 min in air. • Bi{sub 4}B{sub 2}O{sub 9} and Bi{sub 24}B{sub 2}O{sub 39} were formed in the joints brazed at 600 and 625 °C, respectively. • ZnAl{sub 2}O{sub 4} particles were formed in the joints when the brazing temperature was 635 °C. • The maximum shear strength of 85 MPa was obtained for the joints brazed at 650 °C for 20 min. - Abstract: Reliable brazing of sapphire was successfully achieved by using a novel 50Bi{sub 2}O{sub 3}–40B{sub 2}O{sub 3}–10ZnO (mol%) glass braze and joining cycles that peak at temperatures of 600 − 700 °C for 20 min in air. The effect of the brazing temperature on microstructure evolution as well as mechanical properties of the sapphire/sapphire joints was investigated. The results showed that Bi{sub 4}B{sub 2}O{sub 9} and Bi{sub 24}B{sub 2}O{sub 39} were formed in the joints brazed at 600 and 625 °C, respectively. ZnAl{sub 2}O{sub 4} particles were formed in the joints when the brazing temperature was 635 °C due to a reaction between the glass and the sapphire substrate. With the brazing temperature increasing, ZnAl{sub 2}O{sub 4} particles exhibited steady growth, from ~ 160 nm at 635 °C to ~ 455 nm at 700 °C. Besides, ZnAl{sub 2}O{sub 4} particles began to aggregate when the temperature was 675 °C. The strength increased sharply when the brazing temperature increased to 635 °C, which was mainly attributed to the formation of ZnAl{sub 2}O{sub 4} particles in the joint domain. The maximum shear strength of 85 MPa was obtained for the joints brazed at 650 °C for 20 min. The joint shear strength decreased due to the aggregation of ZnAl{sub 2}O{sub 4} particles in the joint.

36 MATERIALS SCIENCE↗

Ab initio molecular dynamics simulations of low energy recoil events in ceramics

The recent progress in the use of large-scale ab initio molecular dynamics (AIMD) to investigate low energy recoil events and determine threshold displacement energies, Ed, in ceramics is reviewed. In general, Ed shows a significant dependence on recoil direction and atom. In 3C-SiC, the minimum Ed for both C and Si atoms is found along the <100> direction, with a value of 20 and 49 eV, respectively. The results demonstrate that significant charge transfer occurs during the dynamics process, and defects can enhance charge transfer to surrounding atoms, which provides important insights into the formation of charged defects. It is found that the C vacancy is a positively charged defect, whereas the Si vacancy is in its neutral state. The minimum Ed in GaN is determined to be 17 and 39 eV for N and Ga atoms, respectively, both along the direction. The average Ed for N atoms (32.4 eV) is smaller than that for Ga atoms (73.2 eV). It is of interest to note that the N defects created along different crystallographic directions have a similar configuration (a N-N dumbbell configuration), but various configurations for Ga defects are formed. In Y2Ti2O7 prochlore, the minimum Ed for Y atoms is determined to be 27 eV for a recoil along the <100> direction, 31.5 eV for Ti atoms along the <100> direction, 14.5 eV for O48f atoms along the <110> direction and 13 eV for O8b atoms along the <111> direction. The average Ed values determined are 32.7, 34.2, 14.2 and 16.1 eV for yttrium, titanium, O48f and O8b atoms, respectively. Cation interstitials at vacant 8a sites, which are generally occupied by oxygen anions, and at the bridge sites between two neighboring cations along the <010> direction are observed after low energy recoil events.

Ab initio MD↗

Evaluating quantitative 3-D image analysis as a design tool for low enriched uranium fuel compacts for the transient reactor test facility: A preliminary study

In this study, 3-D image analysis when combined with a non-destructive examination technique such as X-ray computed tomography (CT) provides a highly quantitative tool for the investigation of a material’s structure. In this investigation 3-D image analysis and X-ray CT were combined to analyze the microstructure of a preliminary subsized fuel compact for the Transient Reactor Test Facility’s low enriched uranium conversion program to assess the feasibility of the combined techniques for use in the optimization of the fuel compact fabrication process. The quantitative image analysis focused on determining the size and spatial distribution of the surrogate fuel particles and the size, shape, and orientation of voids within the compact. Additionally, the maximum effect of microstructural features on heat transfer through the carbonaceous matrix of the preliminary compact was estimated. The surrogate fuel particles occupied 0.8% of the compact by volume with a log-normal distribution of particle sizes with a mean diameter of 39 μm and a standard deviation of 16 μm. Roughly 39% of the particles had a diameter greater than the specified maximum particle size of 44 μm suggesting that the particles agglomerate during fabrication. The local volume fraction of particles also varies significantly within the compact although uniformities appear to be evenly dispersed throughout the analysed volume. The voids produced during fabrication were on average plate-like in nature with their major axis oriented perpendicular to the compaction direction of the compact. Finally, the microstructure, mainly the large preferentially oriented voids, may cause a small degree of anisotropy in the thermal diffusivity within the compact. α∥/α⊥, the ratio of thermal diffusivities parallel to and perpendicular to the compaction direction are expected to be no less than 0.95 with an upper bound of 1.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Measurement of inclusive $J/ψ$ production in Au+Au collisions at $\sqrt{s_{\textrm{NN}}}$ = 54.4 GeV at STAR

This article presents measurements of inclusive J/ψ production at midrapidity (|y| < 1.0) in Au+Au collisions at $\sqrt{s_{\textrm{NN}}}$ = 54.4 GeV with the STAR detector at the Relativistic Heavy Ion Collider. A suppression of the J/ψ yield, quantified using the nuclear modification factors (R AA , R CP ), is observed with respect to the scaled production p + p in collisions. The dependence of R AA on collision centrality and J/ψ transverse momentum is measured with improved precision compared to previous measurements at 39 and 62.4 GeV, while the centrality dependence of R CP is measured and compared to the same results at 39, 62.4, and 200 GeV. In central collisions, no significant collision energy dependence of R AA is found within uncertainties for collision energies between 17.3 and 200 GeV. Two transport model calculations that include dissociation and regeneration contributions are consistent with the experimental results within uncertainties. Although no significant collision energy dependence of the J/ψ suppression in high energy heavy-ion collisions up to $\sqrt{s_{\textrm{NN}}}$ = 200 GeV is observed within uncertainties, the newly measured results at 54.4 GeV Au+Au collisions provide additional constraints on theoretical calculations of the hot medium evolution and cold nuclear matter effects.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Analysis of the origins of black carbon and carbon monoxide transported to Beijing, Tianjin, and Hebei in China

A novel back-trajectory approach was adopted to determine the origins of black carbon (BC) and carbon monoxide (CO) transported to Beijing, Tianjin and Hebei. Results showed that the transport efficiency was controlled mainly by mid-latitude westerlies in winter, the South Asian monsoon in summer and prevailing westerly and northwesterly winds in spring and autumn. Hebei was identified as the most important source region of both BC (respectively accounting for 55% and 49%) and CO (39% and 38%) transported to Beijing and Tianjin. Inner Mongolia contributed more to the effective emission intensity (EEI) in winter than in summer for both BC and CO transported to Beijing and Tianjin. Shandong was responsible for higher EEI in summer than in winter. The six provinces making the greatest contributions to BC transported to Hebei were Shandong (19%), Shanxi (19%), Inner Mongolia (17%), Beijing (11%), Henan (11%), and Tianjin (10%), whereas thosemaking the greatest contributions to CO transported to Hebei were Shandong (20%), Inner Mongolia (10%), Tianjin (9%), Henan (9%), Shanxi (9%), and Beijing (8%). In summary, Hebei, Inner Mongolia, Shandong, Tianjin and Shanxi were determined as the dominant source regions of not only BC but also CO transported to Beijing. Hebei, Shandong, Beijing, Inner Mongolia, Henan, Liaoning and Shanxi were relatively important source regions for Tianjin. Shandong, Shanxi, Inner Mongolia, Beijing, Henan, Tianjin, Liaoning, Jiangsu and Anhui were the main source regions for Hebei. Residential and industrial sectors were the dominant sectors for BC and CO transported to the receptors, respectively. These results are consistent with the results of previous studies. Finally, comparing the observed.BC/.CO ratiowith the enhancement ratio of the EEI of BCwith that of CO (Delta EEIBC/Delta EEICO) atMiyun site, we further confirmed that the EEI can be used to represent the amounts of BC and CO reaching receptors. (c) 2018 Published by Elsevier B.V.

black carbon↗

Hydroxylated polychlorinated biphenyls increase reactive oxygen species formation and induce cell death in cultured cerebellar granule cells

Polychlorinated biphenyls (PCBs) are persistent organic pollutants that bioaccumulate in the body, however, they can be metabolized to more water-soluble products. Although they are more readily excreted than the parent compounds, some of the metabolites are still hydrophobic and may be more available to target tissues, such as the brain. They can also cross the placenta and reach a developing foetus. Much less is known about the toxicity of PCB metabolites than about the parent compounds. In the present study, we have investigated the effects of eight hydroxylated (OH) PCB congeners (2'-OH PCB 3, 4-OH PCB 14, 4-OH PCB 34, 4'-OH PCB 35, 4-OH PCB 36, 4'-OH PCB 36, 4-OH PCB 39, and 4'-OH PCB 68) on reactive oxygen species (ROS) formation and cell viability in rat cerebellar granule cells. We found that, similar to their parent compounds, OH-PCBs are potent ROS inducers with potency 4-OH PCB 14 < 4-OH PCB 36 < 4-OH PCB 34 < 4'-OH PCB 36 < 4'-OH PCB 68 < 4-OH PCB 39 < 4'-OH PCB 35. 4-OH PCB 36 was the most potent cell death inducer, and caused apoptotic or necrotic morphology depending on concentration. Inhibition of ERK1/2 kinase with U0126 reduced both cell death and ROS formation, suggesting that ERK1/2 activation is involved in OH-PCB toxicity. The results indicate that the hydroxylation of PCBs may not constitute a detoxification reaction. Since OH-PCBs like their parent compounds are retained in the body and may be more widely distributed to sensitive tissues, it is important that not only the levels of the parent compounds but also the levels of their metabolites are taken into account during risk assessment of PCBs and related compounds.

60 APPLIED LIFE SCIENCES↗

The effect of angiotensin receptor neprilysin inhibitor, sacubitril/valsartan, on central nervous system amyloid-β concentrations and clearance in the cynomolgus monkey

Sacubitril/valsartan (LCZ696) is the first angiotensin receptor neprilysin inhibitor approved to reduce cardiovascular mortality and hospitalization in patients with heart failure with reduced ejection fraction. As neprilysin (NEP) is one of several enzymes known to degrade amyloid-β (Aβ), there is a theoretical risk of Aβ accumulation following long-term NEP inhibition. The primary objective of this study was to evaluate the potential effects of sacubitril/valsartan on central nervous system clearance of Aβ isoforms in cynomolgus monkeys using the sensitive Stable Isotope Labeling Kinetics (SILK™)-Aβ methodology. The in vitro selectivity of valsartan, sacubitril, and its active metabolite sacubitrilat was established; sacubitrilat did not inhibit other human Aβ-degrading metalloproteases. In a 2-week study, sacubitril/valsartan (50 mg/kg/day) or vehicle was orally administered to female cynomolgus monkeys in conjunction with SILK™-Aβ. Despite low cerebrospinal fluid (CSF) and brain penetration, CSF exposure to sacubitril was sufficient to inhibit NEP and resulted in an increase in the elimination half-life of Aβ1-42 (65.3%; p = 0.026), Aβ1-40 (35.2%; p = 0.04) and Aβtotal (29.8%; p = 0.04) acutely; this returned to normal as expected with repeated dosing for 15 days. CSF concentrations of newly generated Aβ (AUC{sub (0–24} {sub h)}) indicated elevations in the more aggregable form Aβ1-42 on day 1 (20.4%; p = 0.039) and day 15 (34.7%; p = 0.0003) and in shorter forms Aβ1-40 (23.4%; p = 0.009), Aβ1-38 (64.1%; p = 0.0001) and Aβtotal (50.45%; p = 0.00002) on day 15. However, there were no elevations in any Aβ isoforms in the brains of these monkeys on day 16. In a second study cynomolgus monkeys were administered sacubitril/valsartan (300 mg/kg) or vehicle control for 39 weeks; no microscopic brain changes or Aβ deposition, as assessed by immunohistochemical staining, were present. Further clinical studies are planned to address the relevance of these findings. - Highlights: • Sacubitril/valsartan reduced Aβ clearance on day 1, but not after 15 daily doses. • Sacubitril/valsartan increased CSF Aβ but did not result in increases in brain Aβ. • No Aβ brain pathology in 39 week monkey study with high dose sacubitril/valsartan.

60 APPLIED LIFE SCIENCES↗

The nuclear localization of low risk HPV11 E7 protein mediated by its zinc binding domain is independent of nuclear import receptors

We investigated the nuclear import of low risk HPV11 E7 protein using 1) transfection assays in HeLa cells with EGFP fusion plasmids containing 11E7 and its domains and 2) nuclear import assays in digitonin-permeabilized HeLa cells with GST fusion proteins containing 11E7 and its domains. The EGFP-11E7 and EGFP-11cE7{sub 39-98} localized mostly to the nucleus. The GST-11E7 and GST-11cE7{sub 39-98} were imported into the nuclei in the presence of either Ran-GDP or RanG19V-GTP mutant and in the absence of nuclear import receptors. This suggests that 11E7 enters the nucleus via a Ran-dependent pathway, independent of nuclear import receptors, mediated by a nuclear localization signal located in its C-terminal domain (cNLS). This cNLS contains the zinc binding domain consisting of two copies of Cys-X-X-Cys motif. Mutagenesis of Cys residues in these motifs changed the localization of the EGFP-11cE7/-11E7 mutants to cytoplasmic, suggesting that the zinc binding domain is essential for nuclear localization of 11E7.

60 APPLIED LIFE SCIENCES↗

The role of intergenerational influence in waste education programmes: The THAW project

Highlights: > Children can be effective advocates in changing their parents' lifestyles. > We investigated the role of intergenerational influence in waste education programmes. > Waste Watch's Take Home Action on Waste project worked with 6705 children in 39 schools. > The results showed increased participation in recycling and declines in residual waste. > The study shows that recycling behaviour is positively impacted by intergenerational influence. - Abstract: Whilst the education of young people is often seen as a part of the solution to current environmental problems seeking urgent attention, it is often forgotten that their parents and other household members can also be educated/influenced via home-based educational activities. This paper explores the theory of intergenerational influence in relation to school based waste education. Waste Watch, a UK-based environmental charity ((www.wastewatch.org.uk)), has pioneered a model that uses practical activities and whole school involvement to promote school based action on waste. This methodology has been adopted nationally. This paper outlines and evaluates how effective school based waste education is in promoting action at a household level. The paper outlines Waste Watch's 'Taking Home Action on Waste (THAW)' project carried out for two and half years in Rotherham, a town in South Yorkshire, England. The project worked with 6705 primary age children in 39 schools (44% of primary schools in the project area) to enable them to take the 'reduce, reuse and recycle message' home to their families and to engage these (i.e. families) in sustainable waste management practices. As well as substantial increases in students' knowledge and understanding of waste reduction, measurement of the impact of the project in areas around 12 carefully chosen sample schools showed evidence of increased participation in recycling and recycling tonnages as well as declining levels of residual waste. Following delivery of the project in these areas, an average increase of 8.6% was recorded in recycling set out rates which led to a 4.3% increase in paper recycling tonnages and an 8.7% increase in tonnages of cans, glass and textiles collected for recycling. Correspondingly, there was a 4.5% fall in tonnages of residual waste. Waste Watch's THAW project was the first serious attempt to measure the intergenerational influence of an education programme on behaviour at home (i.e. other than schools' own waste). It clearly shows that household recycling behaviour can be positively impacted by intergenerational influence via a practical school-based waste education model. However, although the model could potentially have a big impact if rolled out nationally, it will require seed funding and the long-term durability of the model has not yet been fully quantified.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Breaking the Neptunyl Barrier: Direct Access to Neptunium(IV) in Aqueous Solution via Polyoxometalate-Mediated Reduction and Stabilization

Neptunium exhibits truly unique chemistry as its speciation is dominated by the neptunyl(V) ion (NpO 2 + ). Here, in this study, we describe the spontaneous destabilization and reduction of neptunyl(V) via complexation to the Keggin-type polyoxometalate (POM) ligand PW 11 O 39 7– . The POM-mediated reduction of NpO 2 + does not require any reducing agent and occurs within minutes, at room temperature, and in aqueous solution. The resulting [Np(PW 11 O 39 ) 2 ] 10- complex (Np(PW 11 ) 2 ) remains soluble, water-stable, and air-stable for weeks and persists over an extended acidity range. Single-crystal structure, solid-state Raman and UV–visible absorbance characterization of Np(PW 11 ) 2 revealed a mixed alpha/beta isomery of the Keggin ion, forming an unprecedented 50:50 mixture of Np(α-PW 11 ) 2 and Np(α-PW 11 )(β-PW 11 ). Experiments with other tetravalent ions (i.e., Zr 4+ , Hf 4+ , Ce 4+ , and Th 4+ ) indicate that the occurrence of the beta isomer is specific to Np 4+ and independent of the cation’s size. Solution-state characterization of the Np-PW 11 system via UV-visible-NIR absorbance, 31 P NMR, VT NMR, and relaxometry further elucidated the speciation. Moreover, comparative experiments with uranium revealed that the two types of actinyl ions (UO 2 2+ vs NpO 2 + ) undergo drastically different reactions in the presence of PW 11 . UO 2 2+ is not reduced but instead uses PW 11 as a phosphate reservoir and precipitates as uranyl phosphate.

Hastings, Ashley M. [Lawrence Livermore National L↗

Tailored CO 2 -philic Gas Separation Membranes via One-Pot Thiol–ene Chemistry

Recently, thiol–ene chemistry attracts much attention in the construction of functional polymer materials due to its versatility and fast reaction kinetics, though only a few studies have been reported on its utilization in the fabrication of elastic polymer materials. Herein, a series of elastic, poly(dimethylsiloxane)–poly(ethylene glycol) methyl ether acrylate (PDMS–PEGMEA)-based co-polymer membranes are synthesized via a one-pot thiol–ene reaction. These membranes are highly stable and exhibit tunable thermal/mechanical properties by tailoring the cross-linker and side-chain functionality. When used for gas separation application, all grafted elastomer membranes show excellent gas permeability and selectivity, and the membrane with an optimal composition (PDMS–PEGMEA 30 –EOPDMS 10 ) has reached the Robeson upper bound (CO 2 permeability ~800 barrer and α[CO 2 /N 2 ] ~39). The high permeability originates from the extremely fast chain mobility of PDMS molecules at the ambient temperature. Tailoring the PEGMEA content allows control of the α[CO 2 /N 2 ] ranging from 21 to 39 by enhancing gas solubility within the membrane matrix. This study provides a promising strategy to be utilized for the gutter layer, selective layer, or their combination in the industrial gas separation modules.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dependence of Cloud Macrophysical Properties and Phase Distributions on Environmental Conditions Over the North Atlantic and Southern Ocean: Results From COMBLE and MARCUS

The accurate representation of Cold Air Outbreaks (CAOs) and affiliated mixed-phase boundary layer (BL) clouds in models is challenging. How BL cloud properties evolve during CAOs and their dependence on meteorological conditions is not well understood but is important for the simulation of Earth's energy budgets. Here the properties of polar BL clouds over the North Atlantic (NA) and Southern Ocean (SO) are compared using observations from the Measurements of Aerosol Radiation and CloUds over the SO (MARCUS) and CAOs in the Marine BL Experiment (COMBLE) conducted over the NA. MARCUS observations show a stronger BL inversion than COMBLE, with a higher mean EIS (estimated inversion strength)/LTS (lower tropospheric stability) of -0.03 K/13 K compared to COMBLE’s -3.2 K/9.3 K. 39% of CAOs observed during COMBLE were intense with M > 5 K, while MARCUS only had 1.3%. 78%/72% of clouds sampled in CAOs during COMBLE/MARCUS had cloud top heights <4 km. The mean BL cloud top height was over 400 m higher, and the BL was over 500 m deeper for M of 10 K compared to 0 K for both regions. MARCUS observed a 27% moister BL structure than COMBLE when M > 5 K due to stronger BL inversion trapping more moisture within the BL. Under the same LTS, EIS, and M conditions, MARCUS observed a 12% drier BL structure, and clouds were 46% more turbulent than COMBLE. During CAOs, 54% of single-layer BL clouds sampled during MARCUS had liquid-dominated bases compared to 39% during COMBLE.

54 ENVIRONMENTAL SCIENCES↗

Eocene-Oligocene Metamorphism, Fluid Flow and Deformation in the Ruby Mountains-East Humboldt Range Metamorphic Core Complex

Metamorphic core complexes are ubiquitous in collapsed orogens globally and play a primary role in crustal exhumation. Here, we investigate the metamorphic history of the Ruby Mountains-East Humboldt Range metamorphic core complex, Nevada, using petrochronology to understand how magmatism, metamorphism and deformation interact to modulate crustal rheology, and the timing of exhumation within the Sevier orogenic belt. Field study, microstructural analysis, thermobarometry and laser ablation split-stream monazite, titanite and allanite petrochronology of the mylonitic footwall were integrated to elucidate the pressure-temperature-time (P-T-t) evolution. Major-, trace-element and quartz-in-garnet thermobarometry show peak metamorphism occurred at 5.5–6 kbar and 600–650°C across the study area. Monazite and titanite U-(Th)-Pb petrochronology constrain this episode of metamorphism to 88–81 Ma with the structurally deepest samples yielding dates down to ca. 71 Ma. The preservation of peak metamorphic mineral assemblages indicates these rocks remained at near-peak temperature conditions into the Cenozoic. Cenozoic metamorphism occurred during a punctuated episode contemporaneous with the Great Basin ignimbrite flare up. All samples show a distinct 39–37 Ma population of monazite, titanite and allanite dates that correlate with the emplacement of quartz diorite and gabbro intrusions throughout the footwall. Accessory phases contain zoning textures in backscattered electron images that are consistent with fluid-mediated dissolution-reprecipitation reactions. The U-(Th)-Pb analyses from these zones yield 39–27 Ma dates interpreted as the timing of fluid flow. The results of this study elucidate the integrated importance of magmatism, melting and fluid flow in driving the coupled evolution of Late Cretaceous metamorphism within the Sevier hinterland and the subsequent Cenozoic metamorphic core complex development that exhumed the middle crust.

58 GEOSCIENCES↗

First on-line detection of radioactive fission isotopes produced by laser-accelerated protons

Abstract The on-going developments in laser acceleration of protons and light ions, as well as the production of strong bursts of neutrons and multi- $$\hbox {MeV}$$ MeV photons by secondary processes now provide a basis for novel high-flux nuclear physics experiments. While the maximum energy of protons resulting from Target Normal Sheath Acceleration is presently still limited to around $$100 \, \hbox {MeV}$$ 100 MeV , the generated proton peak flux within the short laser-accelerated bunches can already today exceed the values achievable at the most advanced conventional accelerators by orders of magnitude. This paper consists of two parts covering the scientific motivation and relevance of such experiments and a first proof-of-principle demonstration. In the presented experiment pulses of $$200 \, \hbox {J}$$ 200 J at $$\approx \, 500 \, \hbox {fs}$$ ≈ 500 fs duration from the PHELIX laser produced more than $$10^{12}$$ 10 12 protons with energies above $$15 \, \hbox {MeV}$$ 15 MeV in a bunch of sub-nanosecond duration. They were used to induce fission in foil targets made of natural uranium. To make use of the nonpareil flux, these targets have to be very close to the laser acceleration source, since the particle density within the bunch is strongly affected by Coulomb explosion and the velocity differences between ions of different energy. The main challenge for nuclear detection with high-purity germanium detectors is given by the strong electromagnetic pulse caused by the laser-matter interaction close to the laser acceleration source. This was mitigated by utilizing fast transport of the fission products by a gas flow to a carbon filter, where the $$\upgamma$$ γ -rays were registered. The identified nuclides include those that have half-lives down to $$39 \, \hbox {s}$$ 39 s . These results demonstrate the capability to produce, extract, and detect short-lived reaction products under the demanding experimental condition imposed by the high-power laser interaction. The approach promotes research towards relevant nuclear astrophysical studies at conditions currently only accessible at nuclear high energy density laser facilities.

07 ISOTOPE AND RADIATION SOURCES↗