Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “waveguide”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

Influence of the outer-magnetospheric magnetohydrodynamic waveguide on the reflection of hydromagnetic waves from a shear flow at the magnetopause

The coefficient of reflection of a fast magnetosonic wave incident on the magnetosphere from the solar wind is studied analytically in the framework of a plane-stratified model of the medium with allowance for the transverse inhomogeneity of the magnetosphere and a jump of the plasma parameters at the magnetopause. Three factors decisively affecting the properties of reflection are taken into account: the shear flow of the solar wind plasma relative to the magnetosphere; the presence of a magnetospheric magnetohydrodynamic waveguide caused by the transverse plasma inhomogeneity; and the presence of an Alfvén resonance deep in the magnetosphere, where the oscillation energy dissipates. If the solar wind velocity exceeds the wave phase velocity along the magnetopause, then the wave energy in the solar wind is negative and such a wave experiences overreflection. In the opposite case, the wave energy is positive and the wave is reflected only partially. The wave reflection has a pronounced resonant character: the reflection coefficient has deep narrow minima or high narrow maxima at the eigenfrequencies of the magnetospheric waveguide. For other frequencies, the reflection coefficient only slightly differs from unity. The wave energy influx into the magnetosphere is positive for waves with both positive and negative energies. For waves with a negative energy, this is a consequence of their overreflection, because the flux of negative energy carried away by the reflected wave exceeds the incident flux of negative energy.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Selection of modes in transverse-mode waveguides for semiconductor lasers based on asymmetric heterostructures

Asymmetric Al{sub 0.3}Ga{sub 0.7}As/GaAs/InGaAs heterostructures with a broadened waveguide produced by the method of MOCVD epitaxy are studied. It is established that the precision shift of the active region to one of the cladding layers ensures the generation of the chosen mode of high order in the transverse broadened waveguide. It is experimentally established that this shift brings about an increase in internal optical losses and a decrease in the internal quantum efficiency of stimulated emission. It is shown experimentally that the shift of the active region to the n-type cladding layer governs the sublinear form of the power-current characteristic for semiconductor lasers; in the case of a shift of the active region towards the p-type cladding layer, the laser diodes demonstrated a linear dependence of optical power on the pump current in the entire range of pump currents.

36 MATERIALS SCIENCE↗

Structure and properties of optical waveguides in stoichiometric LiNbO{sub 3} crystals

The structures of proton-exchanged and implanted waveguides are studied by X diffraction analysis and vibration spectroscopy. On the basis of the absorption's spectroscopy data in the visible region and the data on the shift of the fundamental absorption edge in the nearultraviolet region, a comparative analysis of technologically conditioned variations in the nonlinear optical properties of proton-exchanged and implanted waveguides in stoichiometric LiNbO{sub 3} crystals is conducted.

36 MATERIALS SCIENCE↗

Waveguide photonic crystals with characteristics controlled with p-i-n diodes

A one-dimensional waveguide photonic structure-specifically, a photonic crystal with a controllable frequency characteristic-is designed. The central frequency of the spectral window of the photonic crystal can be tuned by choosing the parameters of disturbance of periodicity in the photonic crystal, whereas the transmission coefficient at a particular frequency can be controlled by varying the voltage at a p-i-n diode. It is shown that the possibility exists of using the waveguide photonic crystal to design a microwave device operating in the 3-cm-wavelength region, with a transmission band of 70 MHz at a level 3 dB and the transmission coefficient controllable in the range from -1.5 to -25 dB under variations in the forward voltage bias at the p-i-n diode from zero to 700 mV.

36 MATERIALS SCIENCE↗

Changes induced in a ZnS:Cr-based electroluminescent waveguide structure by intrinsic near-infrared laser radiation

The causes of changes that occur in a thin-film electroluminescent metal-insulator-semiconductor-insulator-metal waveguide structure based on ZnS:Cr (Cr concentration of {approx}4 Multiplication-Sign 10{sup 20} cm{sup -3}) upon lasing ({lambda} Almost-Equal-To 2.6 {mu}m) and that induce lasing cessation are studied. It is established that lasing ceases because of light-scattering inhomogeneities formed in the structure and, hence, optical losses enhance. The origin of the inhomogeneities and the causes of their formation are clarified by studying the surface topology and the crystal structure of constituent layers of the samples before and after lasing. The studies are performed by means of atomic force microscopy and X-ray radiography. It is shown that a substantial increase in the sizes of grains on the surface of the structure is the manifestation of changes induced in the ZnS:Cr film by recrystallization. Recrystallization is initiated by local heating by absorbed laser radiation in existing Cr clusters and quickened by a strong electric field (>1 MV cm{sup -1}). The changes observed in the ZnS:Cr film are as follows: the textured growth of ZnS crystallites, an increase in the content of Cr clusters, and the appearance of some CrS and a rather high ZnO content. Some ways for improving the stability of lasing in the ZnS:Cr-based waveguide structures are proposed.

36 MATERIALS SCIENCE↗

Waveguide effect of GaAsSb quantum wells in a laser structure based on GaAs

The waveguide effect of GaAsSb quantum wells in a semiconductor-laser structure based on GaAs is studied theoretically and experimentally. It is shown that quantum wells themselves can be used as waveguide layers in the laser structure. As the excitation-power density attains a value of 2 kW/cm{sup 2} at liquid-nitrogen temperature, superluminescence at the wavelength corresponding to the optical transition in bulk GaAs (at 835 nm) is observed.

36 MATERIALS SCIENCE↗

Suppression of Recombination in the Waveguide of a Laser Heterostructure by Means of Double Asymmetric Barriers

A semiconductor-laser design is proposed in which parasitic recombination in the waveguide region is suppressed by means of double asymmetric barriers adjacent to the active region. Double asymmetric barriers block the undesirable transport of one type of charge carrier while allowing the transport of the other type of carrier. The spacer in the double asymmetric barrier can serve to compensate the elastic strain introduced by the barrier layers as well as to control the energy spectrum of charge carriers and, thus, the transmission coefficient. By the example of a laser with Al{sub 0.2}Ga{sub 0.8}As waveguide layers, it is shown that the design with double asymmetric barriers makes it possible to suppress undesirable electron transport by a factor of 4 in comparison to the design using single asymmetric barriers.

36 MATERIALS SCIENCE↗

Ridge Waveguide Structure for Lattice-Matched Quantum Cascade Lasers

The fabrication and investigation of the ridge waveguide structure for a quantum cascade laser on an indium phosphide substrate intended for a wavelength of 4.8 μm, which corresponds to one of the atmospheric transparency windows, is calculated. The heterostructure is grown by molecular-beam epitaxy and consists of 30 cascades. Post-growth treatment is performed by photolithography using Russian equipment. The fabricated ridge waveguide structure allowed lasing to be attained at the required wavelength at room temperature.

36 MATERIALS SCIENCE↗

Electrically Controlled Logical Switch Based on a Step Yttrium–Iron Garnet Waveguide and a Piezoelectric Actuator

We have demonstrated the possibility of functioning a device based on a spin-wave waveguide containing two channels with different ferrite film thicknesses as a logical switch. For switching states, we have used the dependence of interference type (constructive or destructive) at the output converter common for two channels on the waveguide strain under action of the electrically controlled actuator.

30 DIRECT ENERGY CONVERSION↗

Defect Mode in Microwave Waveguide Bragg Structures with Metal Pins

A waveguide Bragg structure containing equidistant cylindrical pins that are galvanically coupled to a wide wall of the waveguide is used to implement frequency response functions characterized by the presence of a band gap. Characteristics of a defect mode of the microwave photonic crystal with a pin element as a defect with an n–i–p–i–n structure with controlled conductivity placed in the capacitive gap are experimentally studied and calculated. Controlled reflectance of a microwave signal with a dynamic range of greater than 50 dB is obtained at the frequency of the defect mode.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Fabrication and propagation characterization of As2S8 chalcogenide channel waveguide made by UV irradiation annealing

Changes in the refractive index of amorphous chalcogenide A2S8 films upon ultraviolet (UV) exposure and annealing at different temperatures are investigated in detail, indicating an index contrast of the order of 10{sup -2} in the A2S8 channel waveguide. An As2S8 channel waveguide is fabricated using UV well irradiation and then annealing near the glass transition temperature and shows a low propagation loss of 0.76 dB/cm and good propagation characterization at the 1310 nm guided mode.

36 MATERIALS SCIENCE↗

Nonresonant enhancement of spontaneous emission in metal-dielectric-metal plasmon waveguide structures

We theoretically investigate the spontaneous emission process of an optical, dipolar emitter in metal-dielectric-metal slab and slot waveguide structures. We find that both structures exhibit strong emission enhancements at nonresonant conditions, due to the tight confinement of modes between two metallic plates. The large enhancement of surface plasmon-polariton excitation enables dipole emission to be preferentially coupled into plasmon waveguide modes. These structures find applications in creating nanoscale local light sources or in generating guided single plasmons in integrated optical circuits.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Biocompatible Silk Printed Optical Waveguides

Biocompatible silk optical waveguides are fabricated by direct-write assembly and demonstrated to guide light in both straight and curved architectures. Furthermore, these waveguides can easily be doped or functionalized with bioactive molecules, and are promising materials for biophotonic devices.

36 MATERIALS SCIENCE↗

Interpretation of high-harmonic fast-wave propagation in the scrape-off layer of NSTX-U as a geometrically bounded-waveguide mode

This paper revisits the onset of high-harmonic fast-wave (HHFW) propagation in the scrape-off layer (SOL) plasma of the NSTX/NSTX-U spherical tokamak, motivated by past HHFW heating and current drive experiments and modelling. Previously, the fast-wave propagation in the SOL was correlated with the opening (suppression) of the fast-wave right-hand cutoff layer in front of the antenna. In this work, the SOL propagation is interpreted as a geometric waveguide mode guided by the SOL geometry, whose radial width can be comparable to the wave’s perpendicular wavelength in the HHFW regime. A two-dimensional circular model is first employed using full-wave solvers to characterise the poloidal eigenmode structures and to clarify their relationship to annulus resonance. By progressively adding a tokamak-like magnetic-field configuration, starting from a uniform axial field, the effects of magnetic-field gradients and pitch on the SOL waveguide mode are characterised. The poloidal mode numbers supported by the SOL plasma agree well with analytic estimates, indicating that an anisotropic plasma in a bounded geometry selectively supports and amplifies the resonant poloidal mode number. Additionally, two-dimensional axisymmetric NSTX-U simulations demonstrate that the SOL eigenmode features identified in the circular model persist in the experimentally relevant configurations. A control approach based on lengthening the wave perpendicular wavelength relative to the SOL width, including a higher magnetic (B)-field operation, is discussed. The analysis here shows the key role of a bounded geometry in interpreting HHFW eigenmode coupling and propagation in the NSTX-U SOL plasma.

plasma heating↗

Graphene-doped polymer nanofibers for low-threshold nonlinear optical waveguiding

Graphene-doped polymer nanofibers are fabricated by taper drawing of solvated polyvinyl alcohol doped with liquid-phase exfoliated graphene flakes. Nanofibers drawn this way typically have diameters measured in hundreds of nanometers and lengths in tens of millimeters; they show excellent uniformity and surface smoothness for optical waveguiding. Owing to their tightly confined waveguiding behavior, light–matter interaction in these subwavelength-diameter nanofibers is significantly enhanced. Using approximately 1350-nm-wavelength femto-second pulses, we demonstrate saturable absorption behavior in these nanofibers with a saturation threshold down to 0.25 pJ pulse -1 (peak power ~1.3 W). Additionally, using 1064-nm-wavelength nanosecond pulses as switching light, we show all-optical modulation of a 1550-nm-wavelength signal light guided along a single nanofiber with a switching peak power of ~3.2 W.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Free-carrier-induced soliton fission unveiled by in situ measurements in nanophotonic waveguides

Solitons are localized waves formed by a balance of focusing and defocusing effects. These nonlinear waves exist in diverse forms of matter yet exhibit similar properties including stability, periodic recurrence and particle-like trajectories. One important property is soliton fission, a process by which an energetic higher-order soliton breaks apart due to dispersive or nonlinear perturbations. Here we demonstrate through both experiment and theory that nonlinear photocarrier generation can induce soliton fission. Using near-field measurements, we directly observe the nonlinear spatial and temporal evolution of optical pulses in situ in a nanophotonic semiconductor waveguide. We develop an analytic formalism describing the free-carrier dispersion (FCD) perturbation and show the experiment exceeds the minimum threshold by an order of magnitude. We confirm these observations with a numerical nonlinear Schrodinger equation model. Finally, these results provide a fundamental explanation and physical scaling of optical pulse evolution in free-carrier media and could enable improved supercontinuum sources in gas based and integrated semiconductor waveguides.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Imaging exciton–polariton transport in MoSe2 waveguides

The exciton polariton (EP), a half-light and half-matter quasiparticle, is potentially an important element for future photonic and quantum technologies1-4. It provides both strong light-matter interactions and long-distance propagation that is necessary for applications associated with energy or information transfer. Recently, strongly-coupled cavity EPs at room temperature have been demonstrated in van der Waals (vdW) materials due to their strongly-bound excitons5-9. Here we report a nano-optical imaging study of waveguide EPs in MoSe2, a prototypical vdW semiconductor. The measured propagation length of the EPs is sensitive to the excitation photon energy and reaches over 12 μm. The polariton wavelength can be conveniently altered from 600 nm down to 300 nm by controlling the waveguide thickness. Furthermore, we found an intriguing back-bending polariton dispersion close to the exciton resonance. The observed EPs in vdW semiconductors could be useful in future nanophotonic circuits operating in the near-infrared to visible spectral regions.

36 MATERIALS SCIENCE↗