Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “water structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

Computational investigation of water glasses using machine-learning potentials

The molecular origins of water’s anomalous properties have long been a subject of scientific inquiry. The liquid–liquid phase transition hypothesis, which posits the existence of distinct low-density and high-density liquid states separated by a first-order phase transition terminating at a critical point, has gained increasing experimental and computational support and offers a thermodynamically consistent framework for many of water’s anomalies. However, experimental challenges in avoiding crystallization near the postulated liquid–liquid critical point have focused attention to water’s canonical glassy states: low-density and high-density amorphous ice. Here, we use two Deep Potential machine-learning models, trained on the Strongly Constrained and Appropriately Normed density functional and the highly accurate Many-Body Polarizable potential, to conduct an investigation of water’s glassy phenomenology based on quantum mechanical calculations. Despite not being explicitly trained on amorphous ices, both models accurately capture the structure and transformation of the water glasses, including their interconversion along different thermodynamic paths. Isobaric quenching of liquid water at various pressures generates a continuum of intermediate amorphous ices and density fluctuations increase near the liquid–liquid critical pressure. The glass transition temperatures of the amorphous ices produced at different pressures exhibit two distinct branches, corresponding to low-density and high-density amorphous ice behaviors, consistent with experiment and the liquid–liquid transition hypothesis. Extrapolating transformation pressures from isothermal compressions to experimental compression rates brings our simulations into excellent agreement with data. Our findings demonstrate that machine-learning potentials trained on equilibrium phases can effectively model nonequilibrium glassy behavior and pave the way for studying long-timescale, out-of-equilibrium processes with quantum mechanical accuracy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

X-ray Diffraction of Water in Polyvinylpyrrolidone

PVP is a hydrophilic polymer commonly used as an excipient in pharmaceutical formulations. Here we have performed time-resolved high-energy X-ray scattering experiments on pellets of PVP at different humidity conditions for 1-2 days. A two-phase exponential decay in water sorption is found with a peak in the differential pair distribution function at 2.85 Å, which is attributed to the average (hydrogen bonded) carbonyl oxygen-water oxygen distance. Additional scattering measurements on powders with fixed compositions ranging from 2 to 12.3 wt % H 2 O were modeled with Empirical Potential Structure Refinement (EPSR). Further, the models reveal approximately linear relations between the carbonyl oxygen-water oxygen coordination number (nO C - O W ) and the water oxygen-water oxygen coordination number (nO W - O W ) versus water content in PVP. A stronger preference for water-water hydrogen bonding over carbonyl-water bonding is found. At all the concentrations studied the majority of water molecules were found to be randomly isolated, but a wide distribution of coordination environments of water molecules is found within the PVP polymer strands at the highest concentrations. Overall, the EPSR models indicate a continuous evolution in structure versus water content with nO W - O W =1 occurring at similar to 12 wt % H 2 O, i.e., the composition where, on average, each watermolecule is surrounded by one other water molecule.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Recent Progress to Understand and Improve Zeolite Stability in the Aqueous Medium

The work reviewed here attempts to summarize the growing literature on zeolite stability in hot liquid water. This required to first establish the nature, structure and interactions of the active sites in Brønsted and Lewis acidic microporous materials in the presence of liquid water. This understanding was then transferred to zeolite stability and catalyst deactivation. While early results correctly established Si–O–Si hydrolysis as the dominant pathway compared to the Si–O–Al hydrolysis observed in steaming, it also focused extensively on the positive role of framework and extra-framework Al in stabilizing zeolites. However, stability was instead found to more directly correlate with the number of internal structural defects and intraporous water concentration. Stabilization protocols for Brønsted acidic zeolites are described in detail. In the case of Lewis acidic zeolites, their inherent hydrophobic behavior (Si/M >100) makes them more resistant towards water, however, issues such as reversible carbonaceous species formation as well as irreversible metal leaching and fouling remain. Finally, we summarize the most important factors in designing robust and efficient zeolite catalysts made to withstand hot liquid water.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Using geometric simulation software ‘GASP’ to model conformational flexibility in a family of zinc metal–organic frameworks

Here, a new tripodal tricarboxylic acid ligand, 4,4'-(4'-(4'-carboxy-[1,1'-biphenyl]-4-yl)-[2,2':6',2''-terpyridine]-5,5''-diyl)-dibenzoic acid (H 3 cbt ), was synthesised using a three-step convergent strategy. Subsequent reactions with zinc( II ) nitrate hexahydrate yielded three metal–organic frameworks (MOFs). The three MOFs, [Zn(H cbt )]·4DMF ( 1 ), [Zn(H cbt )]·4DMSO·1.5H 2 O·DMF ( 2 ), and [Zn(H cbt )]·2DMF·3H 2 O ( 3 ), each adopt flexible interdigitated 2D net topologies. Framework 1 has DMF-filled channels that retain porosity upon desolvation, with a measured BET surface area of 248 m 2 g -1 . Framework 2 possesses larger DMSO-containing channels that collapse upon desolvation, resulting in near-equivalent porosity values to framework 1 . In silico calculations and topological considerations determined using the geometric simulation software GASP dictate that framework 2 can feasibly alter conformation to approximate 1 , but cannot perfectly replicate the interdigitated motif. Framework 3 formed when wet solvents were used to synthesise 1 . Interestingly, the interdigitated structure of 3 contains a unique carboxylate binding mode that precludes its subsequent adoption by either 1 or 2 upon their exposure to water. This diverse array of structural considerations recommends this MOF family for modelling using GASP. Interrogating frameworks 1–3 using this software provided insights that justified experimentally observed conformational trends, as well as barriers to interconversion between members of this MOF family. In a broader sense, this work demonstrates the wider applicability of GASP software to modelling structural changes within flexible MOF materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hydroxyl radical yields in the heavy ion radiolysis of water

Scavenging experiments coupled with Monte Carlo track structure and kinetics simulations have been used to determining and understand the yields of hydroxyl radicals in the radiolysis of water with protons and carbon ions. Carbon dioxide production from aerated formic acid solutions with concentrations ranging from 10-3 to 1 mol./dm3 was used as a probe of the time dependence of the hydroxyl radical yield from about 5 ns to 1 ?s. Numerical extrapolation of the results at slightly different ion energies in combination with data from gamma radiolysis experiments allows a systematic analysis of both track average and track segment yields, with considerable track chemistry found to occur on the nanosecond to microsecond time scale. Track chemistry calculations utilizing Monte Carlo track structure simulations and nonhomogeneous independent reaction times diffusion-reaction modeling of product yields reproduce experimental observations. Subsequently, the track simulation methods were used to predict hydroxyl radical kinetics in deaerated and aerated water at neutral pH. Taken with literature data for helium ion beam studies, the results offer insight into the potential for indirect radiation induced damage to biological systems for light ions with very different track structures.

38 - RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCL↗

Effects of Surface Terminations of 2D Bi 2 WO 6 on Photocatalytic Hydrogen Evolution from Water Splitting

Two-dimensional (2D)-structured photocatalysts with atomically thin layers not only have the potential to enhance hydrogen generation efficiency but also allow more direct investigations of the effects of surface terminations on photocatalytic activity. In this work, taking 2D Bi 2 WO 6 as a model, we found that the configuration of bilayer Bi 2 O 2 sandwiched by alternating WO 4 layers enabled the thermodynamic driving potential for photocatalytic hydrogen evolution. Without Pt deposition, the H 2 generation efficiency can reach to 56.9 μmol/g/h by 2D Bi 2 WO 6 as compared with no activity of Bi 2 WO 6 nanocrystals under simulated solar light. This configuration is easily functionalized by adsorption of Cl – /Br – to form Bi–Cl/Bi–Br bonds, which leads to the decrease of recombination in photogenerated charge carriers and narrower band gaps. This work highlights an effective way to design photocatalysts with efficient hydrogen evolution by tuning the surface terminations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Learning Coarse-Grained Potentials for Binary Fluids

Even though atomistic and CG models have been used to simulate liquid nanodroplets in vapor, very few rigorous studies of the liquid-liquid interface structure are available, and most of them are limited to planar interfaces. In this work, we evaluate several existing force fields (FF)s, including two atomistic and three CG FFs, with respect to modeling the interface structure and thermodynamic properties of the water-hexane interface. Both atomistic FFs are able to quantitatively reproduce the interfacial tension and the coexisting densities of the experimentally-observed planar interface. We use the atomistic FFs to model water droplets in hexane and use these simulations to test the CG FFs. We found that the tested CG FFs cannot reproduce the interfacial tensions of planar and/or curved interfaces. Finally, we propose a new approach for learning coarse-grained (CG) potentials within the CG SDK (Shinoda-DeVane- Klein) FF framework from atomistic simulation data. We demonstrate that the new potential significantly improves the prediction of both the interfacial tension and structure of water-hexane planar and curved interfaces.

Gao, Peiyuan↗

Molecular aspects of temperature swing solvent extraction for brine desalination using imidazole-based solvents

Solvent extraction desalination has shown to be a promising energy-efficient technique when compared to separation processes usually employed. Despite the remarkable impact of the organic solvent’s molecular characteristics on this process, few studies have been carried out so far to explicitly ascertain the influence of these characteristics on the solubility of water in the solvent. In this report we assess the viability of four different imidazole-based solvents and compare them to an amine compound for solvent extraction desalination of high salinity brines. All-atom molecular simulations of pure solvent and water-solvent bulk mixtures are used to ascertain the influence of the solvents’ molecular structures on solvent–solvent and solvent–water interaction. Our results show that water solubilization in imidazole-based solvents is an endothermic process, while for a secondary amine (diisopropylamine) it is an exothermic process. We show that imidazole-based solvents can be designed to provide characteristics favorable to brine desalination.

42 ENGINEERING↗

Reactor Pressure Vessel Fracture Mechanics Development and Concrete Application Testing for Grizzly

The Grizzly code is being developed to address degradation issues in nuclear reactor structures and components. For light-water reactors, Grizzly currently has capabilities to simulate degradation processes and their effects on structural integrity in two key areas: reactor pressure vessels (RPVs) and reinforced concrete structures. This report documents improvements made to Grizzly’s ability to address both of these structural systems. For RPVs, the reduced-order models (ROMs) used in fracture mechanics calculations have been expanded to allow their application over a broader range of the parameter space than was permitted by the previous models. The ROMs currently used in Grizzly for the evaluation of flaws that are fully embedded within the RPV (as opposed to surface-breaking flaws) are based on a model that is known to be conservative, indicating higher stress intensity factors than would be obtained from direct simulations. A more accurate model that eliminates these excess conservatisms has been recently included in the American Society of Mechanical Engineers Boiler and Pressure Vessel Code but was not applicable for flaws near the RPV surface, which is where the most critical flaws are usually located. That model has recently been extended for increased applicability in this near-surface region. The ROMs for embedded flaws in the Grizzly code have been expanded to include these recent extensions, which permit their use in a much broader set of cases than previously possible. Direct 3D simulations have been used to check these ROMs and have shown good agreement in most cases, although there are still some cases that need further investigation. There are considerable benefits to using these these more accurate and less conservative ROMs for embedded flaws. On a benchmark probabilistic fracture mechanics problem tested here, the conditional probability of fracture initiation computed for a population of flaws in a single plate in an RPV decreased by over a factor of 3. To address aging in reinforced concrete structures, a capability to simulate multiple degradation mechanisms, including alkali-silica reaction and radiation-induced volumetric expansion has been developed in Grizzly over the past several years. This had previously been demonstrated on laboratory-scale specimens but not on full-scale nuclear concrete structures with reinforcement. To demonstrate the applicability of Grizzly to the analysis of large-scale structures of interest, a full 3D model of a representative reinforced concrete structure, including a complex arrangement of reinforcing bars, was developed and demonstrated in Grizzly.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

A combined theoretical and experimental study of small anthracene–water clusters

Water-cluster interactions with polycyclic aromatic hydrocarbons (PAHs) are of paramount interest in many chemical and biological processes. Here we report a study of anthracene monomers and dimers with water (up to four)-cluster systems utilizing molecular beam vacuum-UV photoionization mass spectrometry and density functional calculations. Structural loss in photoionization efficiency curves when adding water indicates that various isomers are generated, while theory indicates only a slight shift in energy in photoionization states of different isomers. Calculations reveal that the energetic tendency of water is to remain clustered and not to disperse around the PAH. Theoretically, we observe water confinement exclusively in the case of four water clusters and only when the anthracenes are in a cross configuration due to optimal OH∙∙∙π interactions, indicating dependence on the size and structure of the PAH. Furthermore theory sheds light on the structural changes that occur in water upon ionization of anthracene, due to the optimal interactions of the resulting hole and water hydrogen atoms.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Propagation of positive discharges in an air bubble having an embedded water droplet

Low temperature plasmas generated inside gas bubbles immersed in water is an effective method of rapidly transferring plasma generated reactive species to the water for applications in biomedicine, agriculture and environment. Reactive species are generally produced in the gas phase plasma and then solvate into the liquid. The large surface-to-volume ratio (SVR) of the bubble accelerates this process. In generating bubbles in water, aerosols and droplets are also contained within the bubble. These droplets also have a large SVR and so can be rapidly plasma activated. However, the presence of the droplets can also impact the propagation of the plasma in the bubble. In this paper, results are discussed from computational and experimental investigations of the formation and evolution of discharges in an air bubble immersed in water with an embedded water droplet. The computations were performed with a two-dimensional plasma hydrodynamics model. Experiments were performed with a quasi-2D bubble apparatus. In bubbles having a droplet, a plasma filament typically bridges from the powered electrode to the droplet, and then from the droplet to the bubble surface. A surface-hugging streamer also occurs on the inner bubble surface and on the surface of the droplet. Both surface streamers result in part from surface charge accumulation and can dominate the formation of reactive species that transport into the droplet. Increasing droplet conductivity suppresses propagation of the surface discharge and leads to a lower density of aqueous reactive species. Increasing conductivity of the surrounding water does not change the overall structure of the discharge but does slightly elevate the discharge intensity. Finally, the size and shape of the embedded droplet can significantly affect the formation and propagation of the streamer.

2D fluid modelling↗

Solvent Influence on the Magnetization and Phase of Fe-Ni Alloy Nanoparticles Generated by Laser Ablation in Liquids

The synthesis of bimetallic iron-nickel nanoparticles with control over the synthesized phases, particle size, surface chemistry, and oxidation level remains a challenge that limits the application of these nanoparticles. Pulsed laser ablation in liquid allows the properties tuning of the generated nanoparticles by changing the ablation solvent. Organic solvents such as acetone can minimize nanoparticle oxidation. Yet, economical laboratory and technical grade solvents that allow cost-effective production of FeNi nanoparticles contain water impurities, which are a potential source of oxidation. Here, we investigated the influence of water impurities in acetone on the properties of FeNi nanoparticles generated by pulsed laser ablation in liquids. To remove water impurities and produce “dried acetone”, cost-effective and reusable molecular sieves (3 Å) are employed. The results show that the Fe50Ni50 nanoparticles’ properties are influenced by the water content of the solvent. The metastable HCP FeNi phase is found in NPs prepared in acetone, while only the FCC phase is observed in NPs formed in water. Mössbauer spectroscopy revealed that the FeNi nanoparticles oxidation in dried acetone is reduced by 8% compared to acetone. The high-field magnetization of Fe50Ni50 nanoparticles in water is the highest, 68 Am2/kg, followed by the nanoparticles obtained after ablation in acetone without water impurities, 59 Am2/kg, and acetone, 52 Am2/kg. The core-shell structures formed in these three liquids are also distinctive, demonstrating that a core-shell structure with an outer oxide layer is formed in water, while carbon external layers are obtained in acetone without water impurity. The results confirm that the size, structure, phase, and oxidation of FeNi nanoparticles produced by pulsed laser ablation in liquids can be modified by changing the solvent or just reducing the water impurities in the organic solvent.

36 MATERIALS SCIENCE↗

Implications of high-pressure oxygen hydrates on radiolytic oxygen in Jovian icy moons

Various icy moons, such as Europa and Ganymede, have thin oxygen atmospheres and exhibit spectral features attributed to oxygen held in their surface ices. The oxygen forms from the radiolysis of water. The interiors of these bodies are subject to high pressures and it is not known how deep into icy moons oxygen-bearing ices can penetrate, or the structures formed by the oxygen–water system at high pressure. Here, we show that oxygen hydrates are stable to 2.6 GPa, allowing them to penetrate deep into icy moons, both above and below proposed sub-surface liquid-water oceans. Similarities between oxygen and hydrogen hydrates indicate potentially enhanced recombination rates, transforming them back into water and offering a resolution to the discrepancy between predicted and measured radiolysis rates. In addition to the low-pressure CS-II clathrate, our results find three high-pressure phases in the oxygen–water system: an ST clathrate, a C 0 hydrate, and a filled ice isomorphous with methane hydrate III. This shows a vast storage potential for molecular oxygen in icy moons and indicates that Europa could still be absorbing oxygen into its crustal ice.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Affinity for OH – Produces Four-Coordinated Zn 2+ Impurities in Hydrated Amorphous Calcium Carbonate

Using ab initio based molecular dynamics and electronic structure calculations, we show that Zn impurities in hydrated amorphous calcium carbonate (ACC) have a much lower coordination number than other divalent impurities due to covalent interactions between the 3d Zn shell and the oxygen atoms of the carbonate and water groups. Further, the local structure around Zn in ACC, including the predicted low coordination number, is confirmed by X-ray absorption spectroscopy of synthetic Zn-bearing ACC. The strong Zn–O chemical interaction leads to substantial water dissociation and slightly disrupts the hydrogen bonding network. Implications of Zn 2+ incorporation for ACC stability are discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nondestructive In Operando Imaging of Thin Film Composite Membrane Compaction Enhanced by AI-Based Segmentation

Reverse osmosis (RO) membranes are essential for desalination and water reuse, yet their permeability declines in high-pressure applications due to membrane compaction. This study investigates the structural and functional responses of commercial brackish, seawater, and high-pressure RO membranes at applied pressures up to 120 bar using a multiscale, nondestructive in operando scanning electron microscopy (iSEM) imaging platform. The iSEM technique reveals progressive densification across the composite membrane structure, which correlates with observed declines in water and solute permeance. To quantify these structural changes with greater fidelity, we combined X-ray computed tomography with AI-based segmentation enabling precise analysis of pore size distribution and thickness of the polysulfone support layer. Compared to traditional thresholding, AI segmentation accurately delineates material phases and void spaces, enhancing the reproducibility and resolution of morphological assessments. The results demonstrate that compaction-induced reductions in porosity and thickness strongly impact membrane transport properties. These findings provide mechanistic insights into the compaction behavior of RO membranes and underscore the potential for advanced imaging and AI-driven data analysis to guide the design of next-generation membranes with improved mechanical resilience and operational longevity.

13 HYDRO ENERGY↗

Insights on Simulating Summer Warming of the Great Lakes: Understanding the Behavior of a Newly Developed Coupled Lake-Atmosphere Modeling System

The Laurentian Great Lakes are the world's largest freshwater system and regulate the climate of the Great Lakes region, which has been increasingly experiencing climatic, hydrological, and ecological changes. An accurate mechanistic representation of the Great Lakes thermal structure in Regional Climate Models (RCMs) is paramount to studying the climate of this region. Currently, RCMs have primarily represented the Great Lakes through coupled one-dimensional (1D) column lake models; this approach works well for small inland lakes but is unable to resolve the realistic hydrodynamics of the Great Lakes and leads to inaccurate representations of lake surface temperature (LST) that influence regional climate and weather patterns. This work overcomes this limitation by developing a fully two-way coupled modeling system using the Weather Research and Forecasting model and a three-dimensional (3D) hydrodynamic model. The coupled model system resolves the interactive physical processes between the atmosphere, lake, and surrounding watersheds; and validated against a range of observational data. The model is then used to investigate the potential impacts of lake-atmosphere coupling on the simulated summer LST of Lake Superior. By evaluating the difference between our two-way coupled modeling system and our observation-driven modeling system, we find that coupled-lake atmosphere dynamics can lead to a higher LST during June-September through higher net surface heat flux entering the lake in June and July and a lower net surface heat flux entering the lake in August and September. The unstratified water in June distributes the entering surface heat flux throughout the water column leading to a minor LST increase, while the stratified waters of July create a conducive thermal structure for the water surface to warm rapidly under the higher incoming surface heat flux. This research provides insight into the coupled modeling system behavior, which is critical for enhancing our predictive understanding of the Great Lakes climate system.

54 ENVIRONMENTAL SCIENCES↗

2D nanoconfinement distorts the solvation structure of hydroxide but not of hydronium

Understanding ion-specific behavior in nanoconfined water is essential for controlling charge transport and selectivity in two-dimensional membranes. Motivated by recent experiments revealing anomalous dielectric and transport behavior of water confined between hBN sheets, we use machine-learning-accelerated first-principles molecular dynamics to investigate the interfacial propensities of hydronium and hydroxide ions under similar confinement. We find that hydronium remains interfacial across all confinement regimes, whereas hydroxide shifts toward the interior as the environment becomes more bulk-like. This contrasting behavior reflects the combined influence of hydrogen bonding, interfacial water layering, and the polarization of hBN, which collectively stabilize hydronium at the surface while making hydroxide slightly more favorable within the structured interior. These findings expose an asymmetry in ion-surface coupling and establish a microscopic origin for hydronium’s enhanced interfacial affinity. The results provide mechanistic insight into ion partitioning in two-dimensional channels and highlight the collective structuring of confined water as a key determinant of interfacial ion thermodynamics.

organic↗