Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “vehicle analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27
All sourcesNASA NTRSDOE OSTI
NASA NTRS2017

Improvement of Automated POST Case Success Rate Using Support Vector Machines

During early conceptual design of complex systems, concept down selection can have a large impact upon program life-cycle cost. Therefore, any concepts selected during early design will inherently commit program costs and affect the overall probability of program success. For this reason it is important to consider as large a design space as possible in order to better inform the down selection process. For conceptual design of launch vehicles, trajectory analysis and optimization often presents the largest obstacle to evaluating large trade spaces. This is due to the sensitivity of the trajectory discipline to changes in all other aspects of the vehicle design. Small deltas in the performance of other subsystems can result in relatively large fluctuations in the ascent trajectory because the solution space is non-linear and multi-modal. In order to help capture large design spaces for new launch vehicles, the authors have performed previous work seeking to automate the execution of the industry standard tool, Program to Optimize Simulated Trajectories (POST). This work initially focused on implementation of analyst heuristics to enable closure of cases in an automated fashion, with the goal of applying the concepts of design of experiments (DOE) and surrogate modeling to enable near instantaneous throughput of vehicle cases.3 As noted in [4] work was then completed to improve the DOE process by utilizing a graph theory based approach to connect similar design points.

Zwack, Mathew R.↗
NASA NTRS2017

Improvement of Automated POST Case Success Rate Using Support Vector Machines

During early conceptual design of complex systems, concept down selection can have a large impact upon program life-cycle cost. Therefore, any concepts selected during early design will inherently commit program costs and affect the overall probability of program success. For this reason it is important to consider as large a design space as possible in order to better inform the down selection process. For conceptual design of launch vehicles, trajectory analysis and optimization often presents the largest obstacle to evaluating large trade spaces. This is due to the sensitivity of the trajectory discipline to changes in all other aspects of the vehicle design. Small deltas in the performance of other subsystems can result in relatively large fluctuations in the ascent trajectory because the solution space is non-linear and multi-modal [1]. In order to help capture large design spaces for new launch vehicles, the authors have performed previous work seeking to automate the execution of the industry standard tool, Program to Optimize Simulated Trajectories (POST). This work initially focused on implementation of analyst heuristics to enable closure of cases in an automated fashion, with the goal of applying the concepts of design of experiments (DOE) and surrogate modeling to enable near instantaneous throughput of vehicle cases [2]. Additional work was then completed to improve the DOE process by utilizing a graph theory based approach to connect similar design points [3]. The conclusion of the previous work illustrated the utility of the graph theory approach for completing a DOE through POST. However, this approach was still dependent upon the use of random repetitions to generate seed points for the graph. As noted in [3], only 8% of these random repetitions resulted in converged trajectories. This ultimately affects the ability of the random reps method to confidently approach the global optima for a given vehicle case in a reasonable amount of time. With only an 8% pass rate, tens or hundreds of thousands of reps may be needed to be confident that the best repetition is at least close to the global optima. However, typical design study time constraints require that fewer repetitions be attempted, sometimes resulting in seed points that have only a handful of successful completions. If a small number of successful repetitions are used to generate a seed point, the graph method may inherit some inaccuracies as it chains DOE cases from the non-global-optimal seed points. This creates inherent noise in the graph data, which can limit the accuracy of the resulting surrogate models. For this reason, the goal of this work is to improve the seed point generation method and ultimately the accuracy of the resulting POST surrogate model. The work focuses on increasing the case pass rate for seed point generation.

Zwack, Matthew R.↗
NASA NTRS1982

Comparison of analytical predictions of longitudinal short period pilot-induced oscillations with results from a simulation study of the space shuttle orbiter

An analytical analysis of conditions producing pilot induced oscillations (PIO's) was made for the space shuttle orbiter in a landing approach configuration for the task of milling the elevation angle of the line of sight to a target vehicle. The analysis yielded a value of PIO frequency and a value for the amount of total system time delay (pilot + control system) that can be tolerated before instability results. Calculations were performed showing the effect of varying the range to the target and of varying the handling qualities of the orbiter vehicle. Analytical predictions were compared with simulation results obtained using a visual motion simulator.

Riley, D. R.↗
NASA NTRS1993

Research in unsteady aerodynamics and computational aeroelasticity at the NASA Langley Research Center

This paper presents recent results in the unsteady aerodynamics and computational aeroelasticity research programs at the NASA Langley Research Center. These programs include development of two types of computational methods: methods that use structured computational meshes and those that use unstructured meshes. Results show that an aeroelastic analysis method that uses unsteady transonic small disturbance (TSD) potential aerodynamics and structured, Cartesian meshes is capable of accurate analysis of complex aircraft configurations. The paper describes recent enhancements to the TSD method that allow analysis of vehicles with swept, flexible vertical surfaces and flexible fuselages and presents selected results that verify the accuracy of the new capabilities. Modifications to a structured-mesh Euler/Navier-Stokes method to allow aeroelastic analysis are described, and a wing flutter analysis using the resulting method is presented. Advantages of using unstructured meshes for the analysis of complex configurations are discussed. The paper presents development of unstructured-mesh Euler/Navier-Stokes methods for unsteady aerodynamics and aeroelastic analysis. Spatial and temporal adaption methods on unstructured meshes are described, and selected results are presented.

Whitlow, Woodrow, Jr.↗
NASA NTRS1988

HASA: Hypersonic Aerospace Sizing Analysis for the Preliminary Design of Aerospace Vehicles

A review of the hypersonic literature indicated that a general weight and sizing analysis was not available for hypersonic orbital, transport, and fighter vehicles. The objective here is to develop such a method for the preliminary design of aerospace vehicles. This report describes the developed methodology and provides examples to illustrate the model, entitled the Hypersonic Aerospace Sizing Analysis (HASA). It can be used to predict the size and weight of hypersonic single-stage and two-stage-to-orbit vehicles and transports, and is also relevant for supersonic transports. HASA is a sizing analysis that determines vehicle length and volume, consistent with body, fuel, structural, and payload weights. The vehicle component weights are obtained from statistical equations for the body, wing, tail, thermal protection system, landing gear, thrust structure, engine, fuel tank, hydraulic system, avionics, electral system, equipment payload, and propellant. Sample size and weight predictions are given for the Space Shuttle orbiter and other proposed vehicles, including four hypersonic transports, a Mach 6 fighter, a supersonic transport (SST), a single-stage-to-orbit (SSTO) vehicle, a two-stage Space Shuttle with a booster and an orbiter, and two methane-fueled vehicles.

Harloff, Gary J.↗
NASA NTRS1990

Hypersonic aerospace sizing analysis for the preliminary design of aerospace vehicles

A review of the hypersonic literature indicated that a general weight and sizing analysis was not available for hypersonic orbital, transport, and fighter vehicles. The objective here is to develop such a method for the preliminary design of aerospace vehicles. This report describes the developed methodology and provides examples to illustrate the model, entitled the Hypersonic Aerospace Sizing Analysis (HASA). It can be used to predict the size and weight of hypersonic single-stage and two-stage-to-orbit vehicles and transports, and is also relevant for supersonic transports. HASA is a sizing analysis that determines vehicle length and volume, consistent with body, fuel, structural, and payload weights. The vehicle component weights are obtained from statistical equations for the body, wing, tail, thermal protection system, landing gear, thrust structure, engine, fuel tank, hydraulic system, avionics, electrical system, equipment payload, and propellant. Sample size and weight predictions are given for the Space Shuttle orbiter and other proposed vehicles, including four hypersonic transports, a Mach 6 fighter, a supersonic transport (SST), a single-stage-to-orbit (SSTO) vehicle, a two-stage Space Shuttle with a booster and an orbiter, and two methane-fueled vehicles.

Harloff, Gary J.↗
NASA NTRS1987

Orbital transfer vehicle concept definition and system analysis study, 1986. Volume 9: Study extension results

The purpose of this extension to the OTV Concept Definition and Systems Analysis Study was to improve the definition of the OTV Program that will be most beneficial to the nation in the 1995 to 2010 timeframe. The implications of the defined mission and defined launch vehicle are investigated. The key mission requirements identified for the Space Transportation Architecture Study (STAS) were established and reflect a need for early capability and more ambitious capability growth. The key technical objectives and related issues addressed are summarized. The analyses of selected areas including aerobrake design, proximity operations, and the balance of EVA and IVA operations used in the support of the OTV at the space-base were enhanced. Sensitivity studies were conducted to establish how the OTV program should be tailored to meet changing circumstances.

Kofal, Allen E.↗
NASA NTRS2016

Experiment Design and Characterization for the Study of Afterbody Radiation During Mars Entry

Recent work has shown that a significant contributor to the afterbody aeroheating during Mars entry is radiation. However, relevant ground test data is not available to help assess the uncertainty associated with prediction of the radiation when designing the thermal protection system for the aeroshell afterbody. The present work is aimed at designing an experiment which allows the study of the afterbody radiation experienced during Mars entry. The X2 expansion tube at the University of Queensland is used to generate the relevant experimental freestream flow conditions. Analysis is carried out to accurately characterize the generated experimental freestream conditions. A two dimensional wedge model is used to produce the expanding flow which simulates aspects of the afterbody flow around Mars entry vehicles. Preliminary analysis of the generated expanding flow shows that it produces significant radiation in the mid-infrared region and has a steady duration of about 50-110 μs. This allows emission spectroscopy to be conducted in the future.

Gu, S.↗
NASA NTRS2008

Tests and Techniques for Characterizing and Modeling X-43A Electromechanical Actuators

A series of tests were conducted on the electromechanical actuators of the X-43A research vehicle in preparation for the Mach 7 and 10 hypersonic flights. The tests were required to help validate the actuator models in the simulation and acquire a better understanding of the installed system characteristics. Static and dynamic threshold, multichannel crosstalk, command-to-surface timing, free play, voltage regeneration, calibration, frequency response, compliance, hysteretic damping, and aircraft-in-the-loop tests were performed as part of this effort. This report describes the objectives, configurations, and methods for those tests, as well as the techniques used for developing second-order actuator models from the test results. When the first flight attempt failed because of actuator problems with the launch vehicle, further analysis and model enhancements were performed as part of the return-to-flight activities. High-fidelity models are described, along with the modifications that were required to match measurements taken from the research vehicle. Problems involving the implementation of these models into the X-43A simulation are also discussed. This report emphasizes lessons learned from the actuator testing, simulation modeling, and integration efforts for the X-43A hypersonic research vehicle.

Lin, Yohan↗
NASA NTRS1985

Orbital transfer vehicle concept definition and system analysis study, 1985. Volume 2: OTV concept definition and evaluation. Book 4: Operations

The benefits of the reusable Space Shuttle and the advent of the new Space Station hold promise for increasingly effective utilization of space by the scientific and commercial as well as military communities. A high energy reusable oribital transfer vehicle (OTV) represents an additional capability which also exhibits potential for enhancing space access by allowing more ambitious missions and at the same time reducing launch costs when compared to existing upper stages. This section, Vol. 2: Book 4, covers launch operations and flight operations. The launch operations section covers analyses of ground based and space based vehicles, launch site facilities, logistics requirements, propellant loading, space based maintenance and aft cargo carrier access options. The flight operations sections contain summary descriptions of ground based and space based OTV missions, operations and support requirements, and a discussion of fleet implications.

Mitchell, Jack C.↗
NASA NTRSDate not supplied

Exergy-based Sensitivity Analysis of the Generic Hypersonic Vehicle using FUN3D

In this paper, the implementation of an exergy-based objective function and its adjoint gradient into NASA’s FUN3D solver is discussed and verified. In order to verify that the exergy-based functional is properly implemented, it is used to predict the drag of the Generic Hypersonic Vehicle (GHV), which is then compared to more traditional force-based drag predictions. In addition to the functional implementation, FUN3D’s adjoint capability was extended to obtain sensitivities. Results were verified using FUN3D’s native complex step method for di↵erentiation using a generic wing configuration. The complex and adjoint gradients yielded discrete agreement demonstrating correct implementation and that the functional can be used for gradient-based multidisciplinary analysis and optimization. Next, various trade studies are conducted on the GHV to understand the design space of the vehicle. Finally, an inverse design problem is solved to verify the utilized design optimization framework which is ready to be deployed for exergy-based optimizations in future work.

Neal L. Novotny↗
NASA NTRS1980

Small scale wind perturbation analysis for vertically rising launch vehicles

This paper discusses the determination of small-scale vertical wind spectra used with space flight and ballistic technology. In particular, Jimsphere, a precision balloon wind sensor with high radar reflectivity is considered. Gross wind velocity data is analyzed to subtract the steady-state wind and wind change-shear effects. A residue of small wind perturbations is left in the horizontal (scalar) along the vertical direction. An analysis leading to formulation of the covariance function with altitude is presented. The function is decoupled to yield an almost periodic representation of the vertical wind perturbations. Forcing functions are determined when the representation is coupled with the vehicle velocity characteristics.

Chenoweth, H. B.↗
NASA NTRS1986

Development and first flight of a sounding rocket payload to investigate the phenomena of rapidly varying space plasma

NASA Goddard Space Flight Center, Wallops Flight Facility has developed, flown, and recovered a unique plasma physics payload. This sounding rocket payload was developed to measure varying aspects of Alfven's critical velocity effect in a space plasma by using conical-shaped barium explosives. These measurements could possibly duplicate conditions that existed in the early solar system. This paper provides details of the payload and subpayload development, with specific emphasis on the extensive dynamic analysis of the barium release modules. Other key elements which are expanded on in the paper are: (1) design, development, and testing acceptance for the science/inertia booms using a viscous damping system for high spin rate deployment; (2) vehicle dynamic analysis; (3) apogee and impact dispersion analysis to satisfy the science and NASA safety requirements; (4) a comparison of predicted versus actual flight events.

Buchanan, R. P.↗
DOE OSTI2024

PHEV Distribution Grid Integration and Smart Systems Testing: Cooperative Research and Development Final Report

To continue NREL's mission, which includes preparing technologies and markets with "speed and scale," NREL researchers will collaborate with Toyota on plug-in electric vehicle technology. Toyota will provide a collection of plug-in hybrid electric vehicles ("PHEVs" [and ultimately including PEVs], collectively, the "Vehicles") to conduct infrastructure interaction testing at NREL facilities. NREL will use available resources in the Vehicle Testing and Integration Facility (VTIF), its staff parking garage with numerous commercial Electric Vehicle Supply Equipment ("EVSEs"), and its Energy Systems Integration Facility (ESIF) to safely execute research experiments that highlight potential distribution system power quality challenges related to plug-in electric vehicles. The expected outcome of this project is a better understanding of the correlation of individual vehicle power quality attributes to a system of vehicles on a distribution network. The data collected and the simulations conducted will be used to guide future experiments and project development that aid in the deployment of plug-in electric vehicles ("PEV").

24 POWER TRANSMISSION AND DISTRIBUTION↗
NASA NTRS2009

Transition Analysis for the HIFiRE-5 Vehicle

The Hypersonic International Flight Research and Experimentation (HIFiRE) 5 flight experiment by Air Force Research Laboratories and Australian Defense Science and Technology Organization is designed to provide in-flight boundary-layer transition data for a canonical 3D configuration at hypersonic Mach numbers. This paper outlines the progress, to date, on boundary layer stability analysis for the HIFiRE-5 flight configuration, as well as for selected test conditions from the wind tunnel experiments supporting the flight test. At flow conditions corresponding to the end of the test window, rather large values of linear amplification factor are predicted for both second mode (N>40) and crossflow (N>20) instabilities, strongly supporting the feasibility of first in-flight measurements of natural transition on a fully three-dimensional hypersonic configuration. Additional results highlight the rich mixture of instability mechanisms relevant to a large segment of the flight trajectory, as well as the effects of angle of attack and yaw angle on the predicted transition fronts for ground facility experiments at Mach 6.

Choudhari, Meelan M.↗
NASA NTRS1988

A theoretical prediction of the attitude dynamics due to aerodynamic effects on the reusable reentry satellite

As part of the preliminary mission analysis of the Reusable Reentry Satellite (RRS) (planned for launching in the early to mid-1990s), the on-orbit attitude dynamics of the RRS were analyzed to quantify various parameters that would affect the attitude dynamics of the vehicle. The analysis simulated the attitude dynamics of the RRS due to aerodynamic forces coupled with the motion of the satellite moving around the orbit, estimated the levels of induced angular rates due to external disturbance torques while in orbit, and established the limits of operational orbit altitudes. The results show that, for a typical 60-day mission, orbit altitudes above 350 km are necessary to prevent undesirable orbit decay, with about 200 km as the lower limit. It was also found that, in order to maintain a pointing attitude toward the sun within an acceptable angular deviation for periods exceeding 8 hrs, it is necessary to orbit at an altitude above 600 km.

Wercinski, P. F.↗
NASA NTRS2018

Exploratory Analysis of the Airspace Throughput and Sensitivities of an Urban Air Mobility System

The use of small, vertical-takeoff and landing aircraft to provide efficient, high-speed, ondemand passenger transportation within a metropolitan area (e.g. intra-city transportation) is a topic of increasing interest and investment within the aerospace and transportation communities. Preliminary, mostly vehicle-level analysis suggests that passenger-carrying “Urban Air Mobility” has the potential to provide meaningful door-to-door trip time savings compared to identical trips taken solely by automobile, even for relatively short trips of a few tens of miles. Subsequent analysis has shown that if such trips can be conducted at costs competitive with ground transportation, the demand for such flight operations, not surprisingly, becomes unprecedented by historical airspace operations counts, raising fundamental questions regarding feasibility, practicality, capacity and basic system attributes such as separation criteria. In this paper, we conduct a preliminary assessment of vertipad requirements and en route separation minima relative to the feasibility of large-scale urban aviation operations. This analysis is acknowledged as being far from comprehensive and is intended to help define the initial boundaries of an airspace system compatible with enabling high-volume operations.

Goodrich, Kenneth H.↗