Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “variational principles”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27
All sourcesNASA NTRSDOE OSTI
NASA NTRS2007

Optical Design of a Compact Imaging Spectrometer for Planetary Mineralogy

We present the design of a compact, wide-angle pushbroom imaging spectrometer suitable for exploration of solar system bodies from low orbit. The spectrometer is based on a single detector array with a broadband response that covers the range 400 to 3000 nm and provides a spectral sampling of 10 nm. The telescope has a 24-deg field of view with 600 spatially resolved elements (detector pixels). A specially designed convex diffraction grating permits optimization of the signal-to-noise ratio through the entire spectral band. Tolerances and design parameters permit the achievement of high uniformity of response through field and wavelength. The spectrometer performance is evaluated in terms of predicted spectral and spatial response functions and from the point of view of minimizing their variation through field and wavelength. The design serves as an example for illustrating the design principles specific to this type of system.

space optics↗
NASA NTRS2021

Constraints on Triple Oxygen Isotope Kinetics

Isotopic disequilibrium is not as well constrained as equilibrium, hindering interpretation of isotopic variations. Kinetic isotope effects, a subset of disequilibrium, are common in nature and have been assumed to be distinct from equilibrium and mass independent isotope effects based on underdeveloped criteria. Using basic physical principles, we provide needed mechanistic constraints on mass-dependent kinetic isotope effects for the triple oxygen isotope system. We find some kinetic isotope effects yield large isotopic variations, exceeding equilibrium, which could be mistaken for mass independent relationships. Meanwhile, other kinetic isotope effects are found to have triple oxygen isotope relationships that could be mistaken for equilibrium isotope effects. Comparison against prior case studies of thermal decomposition of calcite (CaCO3) and brucite (Mg(OH)2) further tests our results. Although oxygen is the focus here, our approach applies to any system with more than two isotopes.

Isotope Geochemistry↗
DOE OSTI2023

First-Principles Cost Estimation of a Sodium Fast Reactor Nuclear Plant

A multi-tiered cost analysis is performed to estimate full costs of a nuclear power plant (NPP) based on sodium-cooled fast reactor (SFR) technology. To address the lack of fully transparent cost estimations from past undertakings for NPPs, we have developed a detailed and first-principles-based cost estimate for a generalized SFR NPP. Our intent is to achieve a high degree of transparency with our cost assumptions and develop a cost model that is flexible and easily extendable to variations in NPP design and other nuclear reactor types. Furthermore, we strive to achieve a clear organization of costs and complete identification of key cost drivers based on first principles. To this end, the cost results of our analysis as given in Table 24 and Table 25 are organized and categorized into a code of accounts (COA) under development at Idaho National Laboratory (INL). Varying degrees of first-principles methods are employed, such as design for manufacture and assembly® (DFMA® ), to elucidate costs in all process levels of the plant equipment, buildings and site structures, personnel, and other miscellaneous but significant cost elements. These approaches have been successfully applied in past cost analysis projects and are designed to enable rapid and flexible cost estimation. Application of these techniques for evaluating NPP costs is similar in concept to the full, detailed estimation of construction and fabrication costs determined in a later stage of NPP development. Note that our approach tries to avoid use of other past analysis results and data such as those from the legacy Energy Economic Data Base (EEDB) Program, as these resources are based on historical NPP costs and thus may not be indicative of new reactor technologies or construction and fabrication/manufacturing techniques. However, we provide a comparison of our SFR NPP cost results in Table 90 against those included in the EEDB for a representative pressurized water reactor (PWR).

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
NASA NTRS1977

Magnetopause shapes - General solutions

The problem of determining the shape of a magnetopause, namely, the tangential discontinuity separating (typically) the magnetic field of a source from external plasma, is reduced to solving an integral equation. No symmetry assumptions whatsoever are used in the derivation, consequently, realistic problems such as model shapes for the earth's magnetosphere (tilted dipole, flowing plasma, etc.) can in principle be treated. Moreover, the magnetic field source itself need not be a simple dipole. A variational method is suggested whereby the optimum parameters for any finite term trial shape are obtained.

Michel, F. C.↗
NASA NTRS1978

The interstellar wind - Mariner 10 measurements of hydrogen /1216 A/ and helium /584 A/ interplanetary emission

A set of unique observations of interplanetary emission at 1216 A and 584 A is presented which were made from Mariner 10 when that spacecraft was in interplanetary space on its way to Venus. The data provide simultaneous mapping of 1216-A hydrogen emission and 584-A helium emission, which allows a direct cross-correlation of these two aspects of the interstellar wind. The data are examined photometrically and compared with the principles of a simple model which provides a first-order understanding of the expected intensity variation over the celestial sphere. Hydrogen and helium sky maps are given which indicate the minima and maxima in emission intensity, a helium-focusing region in excess of 50 to 60 deg, and asymmetries in both emission profiles.

Broadfoot, A. L.↗
NASA NTRS1985

Continental magnetic anomaly constraints on continental reconstruction

Crustal magnetic anomalies mapped by the MAGSAT satellite for North and South America, Europe, Africa, India, Australia and Antarctica and adjacent marine areas were adjusted to a common elevation of 400 km and differentially reduced to the radial pole of intensity 60,000 nT. These radially polarized anomalies are normalized for differential inclination, declination and intensity effects of the geomagnetic field, so that in principle they directly reflected the geometric and magnetic polarization attributes of sources which include regional petrologic variations of the crust and upper mantle, and crustal thickness and thermal perturbations. Continental anomalies demonstrate remarkably detailed correlation of regional magnetic sources across rifted margins when plotted on a reconstruction of Pangea. Accordingly, they suggest further fundamental constraints on the geologic evolution of the continents and their reconstructions.

Vonfrese, R. R. B.↗
NASA NTRS2002

Solar-System Tests of Gravitational Theories

We are engaged in testing gravitational theory by means of observations of objects in the solar system. This work tests the equivalence principle (EP), the Shapiro time delay, the advances of planetary perihelion, the possibility of a secular variation G(dot) in the 'gravitational constant' G, and the rate of the de Sitter (geodetic) precession of the Earth-Moon system. We describe here the results under this contract.

Shapiro, Irwin I.↗
NASA NTRS2005

Lifetime Reliability Prediction of Ceramic Structures Under Transient Thermomechanical Loads

An analytical methodology is developed to predict the probability of survival (reliability) of ceramic components subjected to harsh thermomechanical loads that can vary with time (transient reliability analysis). This capability enables more accurate prediction of ceramic component integrity against fracture in situations such as turbine startup and shutdown, operational vibrations, atmospheric reentry, or other rapid heating or cooling situations (thermal shock). The transient reliability analysis methodology developed herein incorporates the following features: fast-fracture transient analysis (reliability analysis without slow crack growth, SCG); transient analysis with SCG (reliability analysis with time-dependent damage due to SCG); a computationally efficient algorithm to compute the reliability for components subjected to repeated transient loading (block loading); cyclic fatigue modeling using a combined SCG and Walker fatigue law; proof testing for transient loads; and Weibull and fatigue parameters that are allowed to vary with temperature or time. Component-to-component variation in strength (stochastic strength response) is accounted for with the Weibull distribution, and either the principle of independent action or the Batdorf theory is used to predict the effect of multiaxial stresses on reliability. The reliability analysis can be performed either as a function of the component surface (for surface-distributed flaws) or component volume (for volume-distributed flaws). The transient reliability analysis capability has been added to the NASA CARES/ Life (Ceramic Analysis and Reliability Evaluation of Structures/Life) code. CARES/Life was also updated to interface with commercially available finite element analysis software, such as ANSYS, when used to model the effects of transient load histories. Examples are provided to demonstrate the features of the methodology as implemented in the CARES/Life program.

Nemeth, Noel N.↗
NASA NTRS2003

Linear Back-Drive Differentials

Linear back-drive differentials have been proposed as alternatives to conventional gear differentials for applications in which there is only limited rotational motion (e.g., oscillation). The finite nature of the rotation makes it possible to optimize a linear back-drive differential in ways that would not be possible for gear differentials or other differentials that are required to be capable of unlimited rotation. As a result, relative to gear differentials, linear back-drive differentials could be more compact and less massive, could contain fewer complex parts, and could be less sensitive to variations in the viscosities of lubricants. Linear back-drive differentials would operate according to established principles of power ball screws and linear-motion drives, but would utilize these principles in an innovative way. One major characteristic of such mechanisms that would be exploited in linear back-drive differentials is the possibility of designing them to drive or back-drive with similar efficiency and energy input: in other words, such a mechanism can be designed so that a rotating screw can drive a nut linearly or the linear motion of the nut can cause the screw to rotate. A linear back-drive differential (see figure) would include two collinear shafts connected to two parts that are intended to engage in limited opposing rotations. The linear back-drive differential would also include a nut that would be free to translate along its axis but not to rotate. The inner surface of the nut would be right-hand threaded at one end and left-hand threaded at the opposite end to engage corresponding right- and left-handed threads on the shafts. A rotation and torque introduced into the system via one shaft would drive the nut in linear motion. The nut, in turn, would back-drive the other shaft, creating a reaction torque. Balls would reduce friction, making it possible for the shaft/nut coupling on each side to operate with 90 percent efficiency.

Waydo, Peter↗
NASA NTRS2022

Thermospheric Neutral Density Variation During the “SpaceX” Storm: Implications From Physics-Based Whole Geospace Modeling

The Starlink satellites launched on 3 February 2022 were lost before they fully arrived in their designated orbits. The loss was attributed to two moderate geomagnetic storms that occurred consecutively on February 3-4. We investigate the thermospheric neutral mass density variation during these storms with the Multiscale Atmosphere-Geospace Environment (MAGE) model, a first-principles, fully coupled geospace model. Simulated neutral density enhancements are validated by Swarm satellite measurements at the altitude of 400-500 km. Comparison with standalone TIEGCM and empirical NRLMSIS 2.0 and DTM-2012 models suggests better performance by MAGE in predicting the maximum density enhancement and resolving the gradual recovery process. Along the Starlink satellite orbit in the middle thermosphere (∼ 200 km altitude), MAGE predicts up to 150% density enhancement near the second storm peak while standalone TIEGCM, NRLMSIS 2.0 and DTM-2012 suggest only ∼ 50% increase. MAGE also suggests altitudinal, longitudinal, and latitudinal variability of storm-time percentage density enhancement due to height dependent Joule heating deposition per unit mass, thermospheric circulation changes, and travelling atmospheric disturbances. This study demonstrates that a moderate storm can cause substantial density enhancement in the middle thermosphere. Thermospheric mass density strongly depends on the strength, timing, and location of high-latitude energy input, which cannot be fully reproduced with empirical models. A physics-based, fully coupled geospace model that can accurately resolve the high-latitude energy input and its variability is critical to modeling the dynamic response of thermospheric neutral density during storm time.

Starlink↗
DOE OSTI2023

Detailed comparison of renormalization scale-setting procedures based on the principle of maximum conformality

The Principle of Maximum Conformality (PMC), which generalizes the conventional Gell-Mann-Low method for scale-setting in perturbative QED to non-Abelian QCD, provides a rigorous method for achieving unambiguous scheme-independent, fixed-order predictions for physical observables consistent with the principles of the renormalization group. In addition to the original multi-scale-setting approach (PMCm), two variations of the PMC have been proposed to deal with ambiguities associated with the uncalculated higher order terms in the pQCD series, i.e. the single-scale-setting approach (PMCs) and the procedures based on ``intrinsic conformality" (PMC ∞ ). In this paper, we will give a detailed comparison of these PMC approaches by comparing their predictions for three important quantities R e+e– , R τ , and $Γ(H→b\bar{b}$) up to four-loop pQCD corrections. The PMCs approach determines an overall effective running coupling α s (Q) by the recursive use of the renormalization group equation, whose argument Q represents the actual momentum flow of the process. Our numerical results show that the PMCs method, which involves a somewhat simpler analysis, can serve as a reliable substitute for the full multi-scale PMCm method, and that it leads to more precise pQCD predictions with small residual scale dependence.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

$\alpha$-Clustering in atomic nuclei from first principles with statistical learning and the Hoyle state character

A long-standing crucial question with atomic nuclei is whether or not α clustering occurs there. An α particle (helium-4 nucleus) comprises two protons and two neutrons, and may be the building block of some nuclei. This is a very beautiful and fascinating idea, and is indeed plausible because the α particle is particularly stable with a large binding energy. However, direct experimental evidence has never been provided. Here, we show whether and how α(-like) objects emerge in atomic nuclei, by means of state-of-the-art quantum many-body simulations formulated from first principles, utilizing supercomputers including K/Fugaku. The obtained physical quantities exhibit agreement with experimental data. The appearance and variation of the α clustering are shown by utilizing density profiles for the nuclei beryllium-8, -10 and carbon-12. With additional insight by statistical learning, an unexpected crossover picture is presented for the Hoyle state, a critical gateway to the birth of life.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

Designing an Optimal Sensor Network via Minimizing Information Loss

Optimal experimental design is a classic topic in statistics, with many well-studied problems, applications, and solutions. The design problem we study is the placement of sensors to monitor spatiotemporal processes, explicitly accounting for the temporal dimension in our modeling and optimization. We observe that recent advancements in computational sciences often yield large datasets based on physics-based simulations, which are rarely leveraged in experimental design. We introduce a novel model-based sensor placement criterion, along with a highly-efficient optimization algorithm, which integrates physics-based simulations and Bayesian experimental design principles to identify sensor networks that “minimize information loss” from simulated data. Our technique relies on sparse variational inference and (separable) Gauss-Markov priors, and thus may adapt many techniques from Bayesian experimental design. We validate our method through a case study monitoring air temperature in Phoenix, Arizona, using state-of-the-art physics-based simulations. Our results show our framework to be superior to random or quasi-random sampling, particularly with a limited number of sensors. We conclude by discussing practical considerations and implications of our framework, including more complex modeling tools and real-world deployments.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Experimental demonstration of OSC at IOTA: IOTA Run #3 (Report)

Optical Stochastic Cooling (OSC) is an optical-bandwidth extension of Stochastic Cooling that could advance the state-of-the-art cooling rate in beam cooling by three to four orders of magnitude. The concept of OSC was first suggested in the early 1990s by Zolotorev, Zholents and Mikhailichenko, and replaced the microwave hardware of SC with optical analogs, such as wigglers and optical amplifiers. A number of variations on the original OSC concept have been proposed, and while a variety of proof-of-principle demonstrations and operational uses have been considered, the concept was not experimentally demonstrated up to now. An OSC R&D program has been underway at IOTA for the past several years. Run #3 of the IOTA ring, which began in Nov. 2020 and concluded in Aug. 2021, was focused on the world’s first experimental demonstration of OSC. The experimental program was successful in demonstrating and characterizing the OSC physics with the major outcomes including strong cooling in one, two and three dimensions, validation of the theoretical models of OSC and the demonstration of OSC with a single electron. This report briefly describes the activities and major milestones of the OSC program during Run #3.

42 ENGINEERING↗
NASA NTRS1983

Real line strength distributions for random band models

An improved random band-model method, which makes allowance for the real line-strength distribution, is proposed. The model is shown to be useful for low-resolution, infrared observational data of the outer solar system. The method can be used as easily as conventional random band calculations. In the illustrative examples cited here, the variation of line width with J, the rotational quantum number, is small. Other effects which can, in principle, cause the model to deviate from laboratory observations are discussed. These include the assumption that line positions are random, ignoring the effects of the Lorentz wings of lines immediately outside the specific interval for which the mean transmission is calculated, and ignoring the effects of instrumental slit functions.

Kim, S. J.↗
NASA NTRS1992

Robust H-infinity control synthesis method and its application to benchmark problems

This paper presents a robust H-infinity control synthesis method for structured parameter uncertainty. The robust H-infinity control design methodology is also incorporated with the so-called internal model principle for persistent-disturbance rejection. A noncollocated control problem of flexible space structures subject to parameter variations is used to illustrate the design methodology. It is shown that the proposed design method invariably makes use of nonminimum-phase compensation and that it achieves the desired asymptotic disturbance rejection by having a disturbance rejection 'dipole'.

Wie, Bong↗
NASA NTRS1997

Solar-System Tests of Gravitational Theories

We are engaged in testing gravitational theory by means of observations of objects in the solar system. These tests include an examination of the Principle Of Equivalence (POE), the Shapiro delay, the advances of planetary perihelia, the possibility of a secular variation G in the "gravitational constant" G, and the rate of the de Sitter (geodetic) precession of the Earth-Moon system. These results are consistent with our preliminary results focusing on the contribution of Lunar Laser Ranging (LLR), which were presented at the seventh Marcel Grossmann meeting on general relativity. The largest improvement over previous results comes in the uncertainty for (eta): a factor of five better than our previous value. This improvement reflects the increasing strength of the LLR data. A similar analysis presented at the same meeting by a group at the Jet Propulsion Laboratory gave a similar result for (eta). Our value for (beta) represents our first such result determined simultaneously with the solar quadrupole moment from the dynamical data set. These results are being prepared for publication. We have shown how positions determined from different planetary ephemerides can be compared and how the combination of VLBI and pulse timing information can yield a direct tie between planetary and radio frames. We have continued to include new data in our analysis as they became available. Finally, we have made improvement in our analysis software (PEP) and ported it to a network of modern workstations from its former home on a "mainframe" computer.

Shapiro, Irwin↗
DOE OSTI2023

Precision redshift-space galaxy power spectra using Zel'dovich control variates

Numerical simulations in cosmology require trade-offs between volume, resolution and run-time that limit the volume of the Universe that can be simulated, leading to sample variance in predictions of ensemble-average quantities such as the power spectrum or correlation function(s). Sample variance is particularly acute at large scales, which is also where analytic techniques can be highly reliable. This provides an opportunity to combine analytic and numerical techniques in a principled way to improve the dynamic range and reliability of predictions for clustering statistics. In this paper we extend the technique of Zel'dovich control variates, previously demonstrated for 2-point functions in real space, to reduce the sample variance in measurements of 2-point statistics of biased tracers in redshift space. We demonstrate that with this technique, we can reduce the sample variance of these statistics down to their shot-noise limit out to k ~ 0.2 h Mpc -1 . This allows a better matching with perturbative models and improved predictions for the clustering of e.g. quasars, galaxies and neutral Hydrogen measured in spectroscopic redshift surveys at very modest computational expense. We discuss the implementation of ZCV, give some examples and provide forecasts for the efficacy of the method under various conditions.

79 ASTRONOMY AND ASTROPHYSICS↗