Nanoscale Bubble Domains and Topological Transitions in Ultrathin Ferroelectric Films
Not provided.
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Not provided.
Not provided.
Abstract Although reactive additives have been employed in perovskite solar cells to enhance film morphology and significantly increase device performance, little is known about the effect of these additives on perovskite structural and optical properties. Here we report a systematic study of how the properties of methylammonium lead iodide perovskite (CH 3 NH 3 PbI 3 ) are influenced by hydrohalic acid additives (HX; X=I, Br, Cl) in the precursor solution. Detailed structural and optical spectroscopic analysis reveals that all three acids affect the optical properties and alter the unit cell lattice parameters. Depending on the identity and concentration of HX, optical bandgaps widen or compress: addition of HBr yields a wider bandgap, whereas HI compresses the gap at high concentrations; HCl, on the other hand, has no significant effect on the bandgap. These changes can be understood by correlating them with the types of defects present in polycrystalline perovskite thin films in combination with the structural strain induced in very small crystallites. The presence of extra halides from HX in the precursor solution enables filling of the lattice vacancies in the perovskite, thereby altering metal–halogen–metal bond connectivity and consequently cell volumes and optical bandgaps. Remarkably, a room temperature tetragonal→cubic phase transition is observed for CH 3 NH 3 PbI 3 films treated with high HX concentrations. Further insights into this anomalous phase transformation are obtained from in situ variable‐temperature X‐ray diffraction in the 25–55 °C (298–328 K) range, revealing a monotonic fall in transition temperature with increasing precursor solution HX concentration.
Aqueous metal-oxo clusters without organic ligands (including polyoxometalates and group 13 polycations) are useful for energy, environmental and biomolecular applications. While ligands stabilize clusters of different elements, such as open-shell transition metals, they inhibit reactivity and solubility. Therefore a grand challenge is to conceive and execute synthetic strategies to isolate metal-oxo clusters of any composition, without ligation. Here we crystallize and structurally characterize a Cr 3+ dodecamer Keggin ion without organic ligation. Detailed characterization of its formation leads to understanding its reaction pathway, which may translate to isolation of other open-shell transition metal-oxo clusters. We employed electrospray ionization mass spectrometry, Raman spectroscopy and X-ray scattering (small-angle and total) to identify important reaction intermediates and processes. The aqueous synthesis presented here is simple to implement and scalable, producing pure phase materials in gram quantities.
Not provided.
The detonation of hundreds of explosive devices from either a transportation or storage accident is an extremely dangerous event. This paper focuses on identifying ways of packing/storing arrays of explosive cylinders that will reduce the probability of a Deflagration to Detonation Transition (DDT). The Uintah Computational Framework was utilized to predict the conditions necessary for a large scale DDT to occur. The results showed that the arrangement of the explosive cylinders and the number of devices packed in a “box” greatly effects the probability of a detonation.
The multicore generation of scientific high performance computing has provided a platform for the realization of Exascale computing, and has also underscored the need for new paradigms in coding parallel applications. The current standard for writing parallel applications requires programmers to use languages designed for sequential execution. These languages have abstractions that only allow programmers to operate on the process centric local view of data. To provide suitable languages for parallel execution, many research efforts have designed languages based on the Partitioned Global Address Space (PGAS) programming model. Chapel is one of the more recent languages to be developed using this model. Chapel supports multithreaded execution with high-level abstractions for parallelism. With Chapel in mind, we have developed a set of directives that serve as intermediate expressions for transitioning scientific applications from languages designed for sequential execution to PGAS languages like Chapel that are being developed with parallelism in mind.
With a focus towards developing multiscale capabilities in numerical weather prediction models, the specific problem of the transition from the mesoscale to the microscale is investigated. For that purpose, idealized one-way nested mesoscale to large-eddy simulation (LES) experiments were carried out using the Weather Research and Forecasting model framework. It is demonstrated that switching from one-dimensional turbulent diffusion in the mesoscale model to three-dimensional LES mixing does not necessarily result in an instantaneous development of turbulence in the LES domain. However, very large fetches are needed for the natural transition to turbulence to occur. The computational burden imposed by these long fetches necessitates the development of methods to accelerate the generation of turbulence on a nested LES domain forced by a smooth mesoscale inflow. To that end, four new methods based upon finite amplitude perturbations of the potential temperature field along the LES inflow boundaries are developed, and investigated under convective conditions. Each method accelerated the development of turbulence within the LES domain, with two of the methods resulting in a rapid generation of production and inertial range energy content associated to microscales that is consistent with non-nested simulations using periodic boundary conditions. The cell perturbation approach, the simplest and most efficient of the best performing methods, was investigated further under neutral and stable conditions. Successful results were obtained in all the regimes, where satisfactory agreement of mean velocity, variances and turbulent fluxes, as well as velocity and temperature spectra, was achieved with reference non-nested simulations. In contrast, the non-perturbed LES solution exhibited important energy deficits associated to a delayed establishment of fully-developed turbulence. The cell perturbation method has negligible computational cost, significantly accelerates the generation of realistic turbulence, and requires minimal parameter tuning, with the necessary information relatable to mean inflow conditions provided by the mesoscale solution.
Given its large X-ray stopping power and low specific heat capacity, bismuth (Bi) is a promising absorber material for X-ray microcalorimeters and has been used with transition-edge sensors (TESs) in the past. However, distinct X-ray spectral features have been observed in TESs with Bi absorbers deposited with different techniques. Evaporated Bi absorbers are widely reported to have non-Gaussian low-energy tails, while electroplated ones do not show this feature. In this study, we fabricated Bi absorbers with these two methods and performed microstructure analysis using scanning electron microscopy and X-ray diffraction microscopy. The two types of material showed the same crystallographic structure, but the grain size of the electroplated Bi was about 40 times larger than that of the evaporated Bi. This distinction in grain size is likely to be the cause of their different spectral responses.
Here, we study the shear jamming of athermal frictionless soft spheres, and find that in the thermodynamic limit, a shear-jammed state exists with different elastic properties from the isotropically-jammed state. For example, shear-jammed states can have a non-zero residual shear stress in the thermodynamic limit that arises from long-range stress-stress correlations. As a result, the ratio of the shear and bulk moduli, which in isotropically-jammed systems vanishes as the jamming transition is approached from above, instead approaches a constant. In contrast to these striking differences, we argue that in a deeper sense, the shear jamming and isotropic jamming transitions actually have the same symmetry, and that the differences can be fully understood by rotating the six-dimensional basis of the elastic modulus tensor.
Here, we present a detailed investigation of the specific heat of Ca 3 (Ru 1-x M x ) 2 O 7 (M = Ti, Fe, Mn) single crystals. Depending on the dopant and doping level, three distinct regions are present: a quasitwo-dimensional metallic state with antiferromagnetic (AFM) order formed by ferromagnetic bilayers (AFM-b), a Mott insulating state with G-type AFM order (G-AFM), and a localized state with a mixed AFM-b and G-AFM phase. Our specific heat data provide deep insights into the Mott transitions induced by Ti and Mn doping. We observed not only an anomalous large mass enhancement, but also an additional term in the specific heat, i.e., C ∝ T 2 , in the localized region. The C ∝ T 2 term is most likely due to long-wavelength excitations with both FM and AFM components. A decrease in the Debye temperature is observed in the G-type AFM region, indicating lattice softening associated with the Mott transition.
Neutron-diffraction investigation on the deformation of a Fe-18Mn-3Si-0.6C-0.4Al steel reveals that the twinning is mainly dominant at a stress below 900 MPa, above which the twinning behavior is largely outweighed by phase transformation from the face-centered-cubic (FCC) γ-austenite to the hexagonal-close-packed (HCP) ε-martensite. In the deformed grains, the distribution of ε-martensite is parallel with the twin boundary. Both the well-known {111} γ //{0001} ε relationship and an additional {111} γ //{11–21} ε orientation relation were identified. After the phase transformation, both phases deformed further with the lattice rotating around an axis perpendicular to the tensile direction. Transition from the twinning dominant behavior to the phase transformation induced plasticity effect is explained by the grain orientation dependence of the effective stacking fault energy (ESFE). An asymmetric and inverse relationship between the width of stacking faults (SF) and the ESFE is obtained from the density functional theory (DFT). The tensile stress always increases proportionally with the SF width in the twinning favorable grains and thus a decreasing ESFE. The replacement of twinning activities by phase transformation could be due to both the nucleation site of ε-martensite at the SF of the twin boundary and the decrease of the ESFE in grains which originally favors the twinning.
Highlights: • bLF reverses EMT phenotype to MET in OSCC cells. • bLF enhances E-cadherin expression and suppresses vimentin in OSCC cells. • bLF inhibits TWIST through ERK pathway to gain E-cadherin. Epithelial-to-mesenchymal transition (EMT) is a biological process of invasion and metastasis in cancers, including in oral squamous cell carcinoma (OSCC). However, an effective anticancer drug that directly targets EMT has not yet been discovered. Therefore, we aimed to investigate the repressive effects of bovine lactoferrin (bLF) on EMT to achieve mesenchymal-to-epithelial transition (MET) in OSCC. OSCC cell lines, HOC313 (EMT-induced) and SCCVII (without EMT induction), were treated with bLF. The effects of bLF on EMT in OSCC were identified histologically by haematoxylin and eosin staining and observed morphologically and immunohistochemically using an anti-E-cadherin antibody. Expression levels of E-cadherin and vimentin were investigated using RT-PCR and western blotting. Immuno-expression of E-cadherin was examined in vivo in tumour tissues of C3H/HeN mice, transplanted with SCCVII cells, with or without bLF administration. We found that bLF changed the spindle-like mesenchymal cells to cuboidal-like epithelial cells and enhanced the affinity of membrane-bound E-cadherin in HOC313 cells. The transformation of EMT-MET in HOC313 cells was confirmed by the upregulation of E-cadherin and suppression of vimentin. Moreover, bLF suppressed TWIST expression through downregulation of ERK1/2 phosphorylation. Additionally, the inhibition tumour cell infiltration and increase in E-cadherin expression were observed in xenografts of the mice orally administered with bLF. Thus, based on the results from in vitro and in vivo studies, we concluded that bLF caused the restoration of epithelial properties through MET. Importantly, this finding is novel and is the first report indicating that bLF inhibited EMT and induced MET in OSCC, suggesting that bLF may provide a novel therapeutic strategy in OSCC.
Not Available