Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “technology acceptance”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27
All sourcesNASA NTRSDOE OSTI
NASA NTRS1995

Future requirements in surface modeling and grid generation

The past ten years have seen steady progress in surface modeling procedures, and wholesale changes in grid generation technology. Today, it seems fair to state that a satisfactory grid can be developed to model nearly any configuration of interest. The issues at present focus on operational concerns such as cost and quality. Continuing evolution of the engineering process is placing new demands on the technologies of surface modeling and grid generation. In the evolution toward a multidisciplinary analysis-bascd design environment, methods developed for Computational Fluid Dynamics are finding acceptance in many additional applications. These two trends, the normal evolution of the process and a watershed shift toward concurrent and multidisciplinary analysis, will be considered in assessing current capabilities and needed technological improvements.

Cosner, Raymond R.↗
NASA NTRS2016

Scaling Impacts in Life Support Architecture and Technology Selection

For long-duration space missions outside of Earth orbit, reliability considerations will drive higher levels of redundancy and/or on-board spares for life support equipment. Component scaling will be a critical element in minimizing overall launch mass while maintaining an acceptable level of system reliability. Building on an earlier reliability study (AIAA 2012-3491), this paper considers the impact of alternative scaling approaches, including the design of technology assemblies and their individual components to maximum, nominal, survival, or other fractional requirements. The optimal level of life support system closure is evaluated for deep-space missions of varying duration using equivalent system mass (ESM) as the comparative basis. Reliability impacts are included in ESM by estimating the number of component spares required to meet a target system reliability. Common cause failures are included in the analysis. ISS and ISS-derived life support technologies are considered along with selected alternatives. This study focusses on minimizing launch mass, which may be enabling for deep-space missions.

Lange, Kevin↗
NASA NTRS1999

Utilizing Advanced Vibration Isolation Technology to Enable Microgravity Science Operations

Microgravity scientific research is performed in space to determine the effects of gravity upon experiments. Until recently, experiments had to accept the environment aboard various carriers: reduced-gravity aircraft, sub-orbital payloads, Space Shuttle, and Mir. If the environment is unacceptable, then most scientists would rather not expend the resources without the assurance of true microgravity conditions. This is currently the case on the International Space Station, because the ambient acceleration environment will exceed desirable levels. For this reason, the g-LIMIT (Glovebox Integrated Microgravity Isolation Technology) system is currently being developed to provide a quiescent acceleration environment for scientific operations. This sub-rack isolation system will provide a generic interface for a variety of experiments for the Microgravity Science Glovebox. This paper describes the motivation for developing of the g-LIMIT system, presents the design concept and details some of the advanced technologies utilized in the g-LIMIT flight design.

Alhorn, Dean Carl↗
NASA NTRS2016

Cleaning and Cleanliness Measurement of Additive Manufactured Parts

The successful acquisition and utilization of piece parts and assemblies for contamination sensitive applications requires application of cleanliness acceptance criteria. Contamination can be classified using many different schemes. One common scheme is classification as organic, ionic and particulate contaminants. These may be present in and on the surface of solid components and assemblies or may be dispersed in various gaseous or liquid media. This discussion will focus on insoluble particle contamination on the surfaces of piece parts and assemblies. Cleanliness of parts can be controlled using two strategies, referred to as gross cleanliness and precision cleanliness. Under a gross cleanliness strategy acceptance is based on visual cleanliness. This approach introduces a number of concerns that render it unsuitable for controlling cleanliness of high technology products. Under the precision cleanliness strategy, subjective, visual assessment of cleanliness is replaced by objective measurement of cleanliness. When a precision cleanliness strategy is adopted there naturally arises the question: How clean is clean enough? The methods for establishing objective cleanliness acceptance limits will be discussed.

Mitchell, Mark A.↗
NASA NTRS1994

TOPS On-Line: Automating the Construction and Maintenance of HTML Pages

After the Technology Opportunities Showcase (TOPS), in October, 1993, Langley Research Center's (LaRC) Information Systems Division (ISD) accepted the challenge to preserve the investment in information assembled in the TOPS exhibits by establishing a data base. Following the lead of several people at LaRC and others around the world, the HyperText Transport Protocol (HTTP) server and Mosaic were the obvious tools of choice for implementation. Initially, some TOPS exhibitors began the conventional approach of constructing HyperText Markup Language (HTML) pages of their exhibits as input to Mosaic. Considering the number of pages to construct, a better approach was conceived that would automate the construction of pages. This approach allowed completion of the data base construction in a shorter period of time using fewer resources than would have been possible with the conventional approach. It also provided flexibility for the maintenance and enhancement of the data base. Since that time, this approach has been used to automate construction of other HTML data bases. Through these experiences, it is concluded that the most effective use of the HTTP/Mosaic technology will require better tools and techniques for creating, maintaining and managing the HTML pages. The development and use of these tools and techniques are the subject of this document.

Jones, Kennie H.↗
NASA NTRS1999

Metrology Plan for the Lightweight Technology Demonstration Mirror Program

The purpose of this document is to establish the requirements and procedures for in-process and acceptance testing of the Goddard Primary Mirror and Primary Mirror Assembly. In-process testing is an iterative cycle of testing and figuring until the PM optical surface meets the criteria with considerations for mount induced errors.

Krill, Daniel↗
NASA NTRS2015

Cleaning and Cleanliness Measurement of Additive Manufactured Parts

The successful acquisition and utilization of piece parts and assemblies for contamination sensitive applications requires application of cleanliness acceptance criteria. Contamination can be classified using many different schemes. One common scheme is classification as organic, ionic and particulate contaminants. These may be present in and on the surface of solid components and assemblies or may be dispersed in various gaseous or liquid media. This discussion will focus on insoluble particle contamination on the surface of piece parts and assemblies. Cleanliness of parts can be controlled using two strategies, referred to as gross cleanliness and precision cleanliness. Under a gross cleanliness strategy acceptance is based on visual cleanliness. This approach introduces a number of concerns that render it unsuitable for controlling cleanliness of high technology products. Under the precision cleanliness strategy, subjective, visual assessment of cleanliness is replaced by objective measurement of cleanliness. When a precision cleanliness strategy is adopted there naturally arises the question: How clean is clean enough? The six commonly used methods for establishing objective cleanliness acceptance limits will be discussed. Special emphasis shall focus on the use of multiple extraction, a technique that has been demonstrated for additively manufactured parts.

Welker, Roger W.↗
NASA NTRS1974

The NSF/RANN FY 1975 program for geothermal resources research and technology

The specific goal of the NSF geothermal program is the rapid development by industry of the nation's geothermal resources that can be demonstrated to be commercially, environmentally and socially acceptable as alternate energy sources. NSF, as the lead agency for the federal geothermal energy research program, is expediting a program which encompasses the objectives necessary for significant utilization. These include: acceleration of exploration and assessment methods to identify commercial geothermal resources; development of innovative and improved technology to achieve economic feasibility; evaluation of policy options to resolve environmental, legal, and institutional problems; and support of experimental research facilities for each type of geothermal resource. Specific projects in each of these four objective areas are part of the NSF program for fiscal year 1975.

Kruger, P.↗
NASA NTRS2022

Pre-Installation Acceptance (PIA) Functional Performance of the Design Verification Test (DVT) Exploration Extra-vehicular Mobility Unit (xEMU)

In an effort that began with technology investment by NASA in a few key components during the Constellation Program and then evolved to demonstrate a packaged Portable Life Support System (PLSS) as part of the Advanced Exploration Systems (AES) Program, the next evolution of the PLSS is now a key component of the Exploration Extra-vehicular Mobility Unit (xEMU) and is assembled as a Design Verification Test (DVT) unit. The xEMU has been detailed with respect to completing a demonstration on the International Space Station (ISS) with support of units for initial lunar capability. The xEMU completed the Preliminary Design Review (PDR) with subsequent Safety Review Panel (SRP) Phase I reviews in 2019-2020. The objectives for DVT are to validate requirements, train the team, learn how to fabricate the hardware with appropriate process controls, assemble the hardware, test the hardware, determine the failure mechanisms/limits of the hardware design and buy down the most risk possible for the qualification and flight phases of the development. With completion of the assembly and initial functional testing of the DVT PLSS in laboratory ambient conditions and vacuum conditions the xEMU has progressed significantly into the DVT objectives. A key part of the test sequences for DVT and all future phases is the Pre-Installation Acceptance (PIA) functional testing which validates the performance of integrated systems including: primary thermal control, auxiliary thermal control, suit ventilation, primary oxygen, secondary oxygen, power distribution, as well as caution and warning all with respect to the applied requirements. This discussion will include an overview of the assembly, summary of the PIA functional testing, lessons learned, and corrective actions implemented moving forward into the remainder of the DVT phase for xEMU.

Colin Campbell↗
NASA NTRS1973

Technology requirements for post-1985 communications satellites

The technical and functional requirements for commercial communication satellites are discussed. The need for providing quality service at an acceptable cost is emphasized. Specialized services are postulated in a needs model which forecasts future demands. This needs model is based upon 322 separately identified needs for long distance communication. It is shown that the 1985 demand for satellite communication service for a domestic region such as the United States, and surrounding sea and air lanes, may require on the order of 100,000 MHz of bandwith. This level of demand can be met by means of the presently allocated bandwidths and developing some key technologies. Suggested improvements include: (1) improving antennas so that high speed switching will be possible; (2) development of solid state transponders for 12 GHz and possibly higher frequencies; (3) development of switched or steered beam antennas with 10 db or higher gain for aircraft; and (4) continued development of improved video channel compression techniques and hardware.

Burtt, J. E.↗
DOE OSTI2024

Elucidating non-radiative decay in near-infrared lumiphores: Leveraging new design principles to develop a telecom band organic dye laser

Organic near-infrared (NIR) lumiphores have been targeted for biological and technological applications; however, these dyes exhibit exponentially decreasing quantum yields with decreasing energy gaps. The accepted model of this phenomenon invokes C–H stretching modes as the dominant route of non-radiative energy dissipation. Reducing the number of these modes is a popular strategy for the design of bright NIR lumiphores, but quantitative experimental validation of this strategy is lacking. Here, we evaluate the role of C–H modes in non-radiative relaxation through isotopic labeling of a NIR-emitting complex. Measurements comparing relaxation between protonated and perdeuterated complexes indicate that C–H modes do not contribute significantly to non-radiative relaxation. We instead propose that skeletal modes may play a larger role and suggest that minimizing scaffold size is a promising route for bright NIR lumiphores. In conclusion, we demonstrate the promise of such strategies through the development of the reddest organic-based laser dye yet reported.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

3D printed carbon fiber reinforced carbon as an energy efficient alternative to graphite for EFAS tooling

As Electric Field Assisted Sintering (EFAS) gains more industrial acceptance and use, it becomes more important to develop more efficient means to implement this technology. To this aim, 3D printed continuous carbon fiber reinforced carbon (CCC) was manufactured and fabricated into tooling for EFAS systems as an alternative to traditional graphite tooling. The impact of fiber orientation on the thermal and electrical properties of the CCC was characterized. Sample material was sintered in Tokai G535 graphite tooling, under common processing conditions and compared with CCC tooling. There was nearly 50 % energy savings compared to graphite while maintaining equivalent sample density and microstructure plus keeping ram temperatures 39 % cooler. This is due to spatial control of generated heat and thermal diffusivity within the molds, by means of fiber orientation anisotropy. Finite element modeling of the tooling design supported the experimental results as well as displays the effect of optimization of this 3D printed CCC material.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Engineering A Low-Cost Kelp Aquaculture System for Community-Scale Seaweed Farming at Nearshore Exposed Sites via User-Focused Design Process

For over 50 years, government fishery agencies have recognized the need to transition excess fishing capacity in coastal waters to aquaculture. For the most part, investment strategies to move wild capture and harvest efforts into aquaculture have failed since the technology and capital expense for entry, such as large fish pens, was not conducive for acceptance. In contrast, low trophic level aquaculture of shellfish and seaweeds is suitable as an addition to the livelihoods of seasonal fishing communities and to those displaced by fishery closures, especially if vessels and gear can be designed around existing fishing infrastructures, thus allowing fishers to maintain engagement with their primary fishery, while augmenting income via aquaculture. In this study, an inexpensive, lightweight, and highly mobile gear for kelp seaweed farming was developed and tested over a 3-year period in southern Maine, USA. The system was different from existing kelp farming operations used in nearshore waters that use low-scope mooring lines, and heavy, deadweight anchors. Instead, a highly mobile, easy to deploy system using lightweight gear was designed for exposed conditions. The entire system fit into fish tote boxes and was loadable onto a standard pickup truck. The seaweed system had small but efficient horizontal drag embedment anchors connected to a chain catenary and pretensioned with simple subsurface flotation. The system was able to be deployed and removed in less than 4 h by a crew of three using a 10 m vessel and produced a harvest of 12.7 kg/m over an 8-month fall-winter growth period. The target group for this seaweed research and development effort were coastal fishing communities who move seasonally into non-fishing occupations in service industries, such as construction, retail, etc. An economic assessment suggests farmers would realize an 8% return on investment after3 years and $13.50/h greater income as compared to a non-farming off season job at minimum wage. This low-cost seaweed farming system for fall-winter operations fits well into a “livelihood” strategy for fishing families who must work multiple jobs in the offseason when their main fishery is unavailable.

St-Gelais, Adam T.↗
NASA NTRS1973

Study for identification of beneficial uses of Space, phase 1. Volume 2, book 2: Technical report: results, conclusions and recommendations

A variety of technologies were investigated to determine the benefits to be derived from space activities. The subjects accepted for product development are: (1) eutectics for cold cathodes, (2) higher putiry fiber optics, (3) fluidic wafers, (4) large germanium wafers for gamma ray camera, (5) improved batteries and capacitors, (6) optical filters, (7) corrosion resistant electrodes, (8) high strength carbon-based filaments for plastic reinforcement, and (9) new antibiotics. In addition, three ideas for services, involving disposal of radioactive wastes, blood analysis, and enhanced solar insolation were proposed.

Source record↗
NASA NTRS1982

The impact of distributed computing on education

In this paper, developments in digital computer technology since the early Fifties are reviewed briefly, and the parallelism which exists between these developments and developments in analysis and design procedures of structural engineering is identified. The recent trends in digital computer technology are examined in order to establish the fact that distributed processing is now an accepted philosophy for further developments. The impact of this on the analysis and design practices of structural engineering is assessed by first examining these practices from a data processing standpoint to identify the key operations and data bases, and then fitting them to the characteristics of distributed processing. The merits and drawbacks of the present philosophy in educating structural engineers are discussed and projections are made for the industry-academia relations in the distributed processing environment of structural analysis and design. An ongoing experiment of distributed computing in a university environment is described.

Utku, S.↗
NASA NTRS1992

Application of computational fluid dynamics and laminar flow technology for improved performance and sonic boom reduction

A discussion is given of the many factors that affect sonic booms with particular emphasis on the application and development of improved computational fluid dynamics (CFD) codes. The benefits that accrue from interference (induced) lift, distributing lift using canard configurations, the use of wings with dihedral or anhedral and hybrid laminar flow control for drag reduction are detailed. The application of the most advanced codes to a wider variety of configurations along with improved ray-tracing codes to arrive at more accurate and, hopefully, lower sonic booms is advocated. Finally, it is speculated that when all of the latest technology is applied to the design of a supersonic transport it will be found environmentally acceptable.

Bobbitt, Percy J.↗
NASA NTRS2014

National Space Biomedical Research Institute (NSBRI) JSC Summer Projects

This project optimized the calorie content in a breakfast meal replacement bar for the Advanced Food Technology group. Use of multivariable optimization yielded the highest weight savings possible while simultaneously matching NASA Human Standards nutritional guidelines. The scope of this research included the study of shelf-life indicators such as water activity, moisture content, and texture analysis. Key metrics indicate higher protein content, higher caloric density, and greater mass savings as a result of the reformulation process. The optimization performed for this study demonstrated wide application to other food bars in the Advanced Food Technology portfolio. Recommendations for future work include shelf life studies on bar hardening and overall acceptability data over increased time frames and temperature fluctuation scenarios.

Dowdy, Forrest Ryan↗
NASA NTRS2017

Embracing Open Source for NASA's Earth Science Data Systems

The overarching purpose of NASAs Earth Science program is to develop a scientific understanding of Earth as a system. Scientific knowledge is most robust and actionable when resulting from transparent, traceable, and reproducible methods. Reproducibility includes open access to the data as well as the software used to arrive at results. Additionally, software that is custom-developed for NASA should be open to the greatest degree possible, to enable re-use across Federal agencies, reduce overall costs to the government, remove barriers to innovation, and promote consistency through the use of uniform standards. Finally, Open Source Software (OSS) practices facilitate collaboration between agencies and the private sector. To best meet these ends, NASAs Earth Science Division promotes the full and open sharing of not only all data, metadata, products, information, documentation, models, images, and research results but also the source code used to generate, manipulate and analyze them. This talk focuses on the challenges to open sourcing NASA developed software within ESD and the growing pains associated with establishing policies running the gamut of tracking issues, properly documenting build processes, engaging the open source community, maintaining internal compliance, and accepting contributions from external sources. This talk also covers the adoption of existing open source technologies and standards to enhance our custom solutions and our contributions back to the community. Finally, we will be introducing the most recent OSS contributions from NASA Earth Science program and promoting these projects for wider community review and adoption.

Earth Science↗