Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “system metadata”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

Carbon flux estimates are sensitive to data source: a comparison of field and lab temperature sensitivity data

Abstract A large literature exists on mechanisms driving soil production of the greenhouse gases CO 2 and CH 4 . Although it is common knowledge that measurements obtained through field studies vs. laboratory incubations can diverge because of the vastly different conditions of these environments, few studies have systematically examined these patterns. These data are used to parameterize and benchmark ecosystem- to global-scale models, which are then susceptible to the biases of the source data. Here, we examine how greenhouse gas measurements may be influenced by whether the measurement/incubation was conducted in the field vs. laboratory, focusing on CO 2 and CH 4 measurements. We use Q 10 of greenhouse gas flux (temperature sensitivity) for our analyses because this metric is commonly used in biological and Earth system sciences and is an important parameter in many modeling frameworks. We predicted that laboratory measurements would be less variable, but also less representative of true field conditions. However, there was greater variability in the Q 10 values calculated from lab-based measurements of CO 2 fluxes, because lab experiments explore extremes rarely seen in situ , and reflect the physical and chemical disturbances occurring during sampling, transport, and incubation. Overall, respiration Q 10 values were significantly greater in laboratory incubations (mean = 4.19) than field measurements (mean = 3.05), with strong influences of incubation temperature and climate region/biome. However, this was in part because field measurements typically represent total respiration (Rs), whereas lab incubations typically represent heterotrophic respiration (Rh), making direct comparisons difficult to interpret. Focusing only on Rh-derived Q 10 , these values showed almost identical distributions across laboratory ( n = 1110) and field ( n = 581) experiments, providing strong support for using the former as an experimental proxy for the latter, although we caution that geographic biases in the extant data make this conclusion tentative. Due to a smaller sample size of CH 4 Q 10 data, we were unable to perform a comparable robust analysis, but we expect similar interactions with soil temperature, moisture, and environmental/climatic variables. Our results here suggest the need for more concerted efforts to document and standardize these data, including sample and site metadata.

54 ENVIRONMENTAL SCIENCES↗

Utility-Scale Solar, 2023 Edition: Empirical Trends in Deployment, Technology, Cost, Performance, PPA Pricing, and Value in the United States [Slides]

Berkeley Lab’s “Utility-Scale Solar, 2023 Edition” presents analysis of empirical plant-level data from the U.S. fleet of ground-mounted photovoltaic (PV), PV+battery, and concentrating solar-thermal power (CSP) plants with capacities exceeding 5 MWAC (PV plants of 5 MWAC or less, including residential rooftop systems, are covered separately in Berkeley Lab’s companion annual report, Tracking the Sun). Highlights of this year’s update include: -10.4 GWAC of new utility-scale PV capacity came online in 2022, bringing cumulative installed capacity to more than 61.7 GWAC across 46 states. -94% of all new utility-scale PV capacity added in 2022 uses single-axis tracking. -Median installed project costs declined to $\$1.32$/WAC (or $\$1.07$/WDC) in 2022. -Plant-level capacity factors vary widely, from 9% to 35% (on an AC basis), with a sample median of 24%. The report explores drivers of this variation. -Utility-scale PV’s LCOE fell to $\$39$/MWh in 2022 ($\$29$/MWh if factoring in the federal investment tax credit, or ITC). -PPA prices have largely followed the decline in solar’s LCOE over time, but have recently stagnated and even moved slightly higher. Prices from a sample of recent contracts average around $\$20-30$/MWh (levelized) in the West and $\$30-40$/MWh elsewhere in the continental US. -In 2022, solar’s average market value (defined in the report to include only energy and capacity value) rose by 40% to $\$71$/MWh and exceeded average wholesale prices in 4 of the 7 ISOs/RTOs and 11 of 18 other balancing authorities analyzed. -Adding battery storage is one way to increase the value of solar. Our public data file tracks metadata and PPA prices from ~100 PV+battery hybrid projects that are already online or that have secured offtake arrangements. -the end of 2022, there were at least 947 GW of utility-scale solar power capacity within the interconnection queues across the nation, 456 GW of which include batteries. For more information, and to explore related interactive data visualizations, go to utilityscalesolar.lbl.gov.

14 SOLAR ENERGY↗

Quality-Controlled Meteorological Data from the Flood Control District of Maricopa County (FCDMC) Network, Phoenix, Arizona (1987-2024)

This dataset contains 15- or 30-minute interval meteorological data from the Flood Control District of Maricopa County (FCDMC), Arizona, USA, covering eight key variables across multiple sensor stations between 1987 and 2024. Each variable is stored as a separate CSV file, containing time-series data that have undergone rigorous quality control (QC) procedures and, where appropriate, short-gap interpolation for consistency. The quality control (QC) pipeline consisted of four sequential tests: (1) a range test to ensure all values fall within physically realistic limits, (2) a step test to identify abrupt and implausible changes between consecutive records, (3) a proximity test that validates flagged values from step test using data from nearby stations and exceedance probability thresholds, and (4) a persistence test to detect and remove periods of unrealistically constant readings. These thresholds were calibrated to Arizona’s environmental conditions and sensor specifications. After QC, short gaps (≤2 hours) were linearly interpolated to ensure consistent temporal resolution, except for wind variables. Due to a major upgrade in FCDMC’s data transmission system, only ALERT-2 protocol data (2016–2024) for wind variables are included; earlier ALERT-1 data were excluded because of irregular sampling and high missing rates. This dataset supports regional climate and infrastructure resilience studies by providing standardized, high-resolution meteorological data for the greater Phoenix metropolitan area.

54 ENVIRONMENTAL SCIENCES↗

2D reactive transport model of shale chemical weathering and biogeochemical fluxes along a mountainous hillslope, East River Watershed, Colorado: Input files and simulation results

This data package contains input files and simulation results for a two-dimensional (2D) reactive transport model used to quantitatively analyze the coupled hydrological and biogeochemical processes governing shale weathering and associated biogeochemical fluxes under realistic environmental conditions in the high-elevation East River Watershed. These data support the conclusions presented in Stolze et al. (Water Resources Research, under review), "Model-based interpretation of solute exports and carbon partitioning during shale weathering in a mountainous hillslope". The model simulates atmospheric-subsurface gas exchange, subsurface water flow, and shale weathering processes under dynamic, year-scale conditions along a shale-underlain hillslope located in the East River watershed. The simulations were performed using the PFLOTRAN flow and reactive transport code and executed on the Perlmutter supercomputer to leverage its large-scale parallel computing capabilities. The data package contains two zipped folders, "model_input_files" and "simulation_results", and one readme.txt file. "model_input_files" contains the necessary input files to run the calibrated base-base model presented in Stolze et al. (Water Resources Research, under review). "simulation_results" contains a single hdf5 file ("Output_2D_hillslope_model.h5") which includes the results of simulation performed using the base-case model. This file can be opened with HDFView 3.1.4, Python, or MATLAB. "readme.txt" contains relevant information about the base-case model and provides guidelines on how to run the associated input files provided in the folder "model_input_files". Furthermore, readme.txt provides information regarding the model results provided in "Output_2D_hillslope_model.h5" such as matrix dimensionality and output units. Field datasets used to evaluate model performance were collected at three monitoring wells located along a hillslope transect (PLM1, PLM2, and PLM3). Dissolved ion concentration data were collected from November 2016 to October 2021 for Ca, Mg, DIC, Na, K, SO4 (Dong et al., 2025 - dic_npoc_data_2014_2024.zip - DOI:10.15485/1660459; Williams et al., 2025 - anion_data_2014_2024.zip - DOI:10.15485/1668054; Dong et al., 2025 - cation_data_2014_2024.zip - DOI:10.15485/1668055). Note that we used the files named er_PLM1_xx_yy, er_PLM2_xx_yy, and er_PLM3_xx_yy where xx stands for the name of the aqueous species and yy stands for the depth where the measurements were performed. Soil water content ([0 - 1] m) and water table depth were collected from November 2016 to October 2021 (Wan et al., 2024 - Dynamic_water_table__depthsFig2b.csv and Soil_water_content_Fig4e.csv - DOI:10.15485/2322567). Gaseous CO2 concentration were collected from October 2020 to December 2021(Wan et al., 2024 - Soil_CO2_concentrations_Fig4h.csv - DOI:10.15485/2322567) Gaseous CO2 flux from the subsurface to the atmosphere were collected in the vicinity of PLM2 from October 2019 to May 2022 (Wu et al., 2025). Soil microbial biomass concentration was measured from August 2016 to June 2017 (Sorensen et al., 2019 - 2017_East_River_Pumphouse_Microbial_Biomass__1_.csv - DOI:10.15485/1577267) All field data are published as CSV files compatible with Microsoft Excel, MATLAB, and Python, or as text files. The coordinates of the monitoring wells and the CO2(g) flux sensor in the coordinate system WGS84 are: -PLM1: [38.9197710 ; -106.9492750] -PLM2: [38.9201580 ; -106.9487170] -PLM3: [38.9207843 ; -106.9483668] -PLM4: 38.9210060 ; -106.9479528] -CO2(g) flux sensor: [38.9199180 ; -106.9489906] ------------------------------------------------------------------------------------------- This work was supported by the Watershed Function Science Focus Area at Lawrence Berkeley National Laboratory funded by the US Department of Energy, Office of Science, Biological and Environmental Research under Contract No. DE-AC02-05CH11231. This research used resources of the National Energy Research Scientific Computing Center (NERSC), a Department of Energy User Facility using NERSC award BER-ERCAP 23980, BER-ERCAP 28550, and BER-ERCAP 33789.

54 ENVIRONMENTAL SCIENCES↗

GCAM-Demeter-LU

This GCAM-Demeter-LU is made available under the Open Data Commons Attribution License:http://opendatacommons.org/licenses/by/1.0/. The dataset includes the projected global gridded land cover (excluding the Antarctic) for the period of 2015-2100 at 0.05-degree resolution and 5-year time step under fifteen SSP-RCP scenarios driven by five GCMs (i.e., gfdl, hadgem, ipsl, miroc, and noresm), using the Global Change Analysis Model (GCAM) and a geospatial downscaling model (Demeter). The data has been stored in self-describing NetCDF format. The dataset also includes the mean and standard deviation of the results driven by the five GCMs. More specifically, the data in each year includes grid-explicit fraction (in percent) of each of the 32 plant functional types that are widely used in current Earth system models. The NetCDF files are named as “GCAM_Demeter_LU_SSP_RCP_Model_Year.nc”, where “SSP” and “RCP” denote the SSP and RCP scenarios, including 'ssp1_rcp26', 'ssp1_rcp45', 'ssp1_rcp60', 'ssp2_rcp26', 'ssp2_rcp45', 'ssp2_rcp60', 'ssp3_rcp45', 'ssp3_rcp60', 'ssp4_rcp26', 'ssp4_rcp45', 'ssp4_rcp60', 'ssp5_rcp26', 'ssp5_rcp45', 'ssp5_rcp60', and 'ssp5_rcp85'. “Year” denotes the year of the land use data, and “GCM” denotes the source driving forcing data from five global climate models (gfdl, hadgem, ipsl, miroc, and noresm), or the mean (“modelmean”) and the standard deviation (“modelstd”) of the results from the five GCMs.See https://github.com/JGCRI/chen_et_al_2020a for details on how to reproduce this data. Rights and permissions Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/. The Creative Commons Public Domain Dedication waiver http://creativecommons.org/publicdomain/zero/1.0/ applies to the metadata files associated with this article

99 GENERAL AND MISCELLANEOUS↗

Data and scripts associated with “Sequential Precipitation Input Tagging (SPIT) to Estimate Water Transit Times and Hydrologic Tracer Dynamics within Water-Tagging Enabled Hydrologic Models” (v3)

This data package is associated with the publication “Sequential Precipitation Input Tagging (SPIT) to Estimate Water Transit Times and Hydrologic Tracer Dynamics within Water-Tagging Enabled Hydrologic Models” submitted to Journal of Advances in Modeling Earth Systems (Butler et al. 2025). This study developed the Sequential Precipitation Input Tagging (SPIT) framework to tag input precipitation and estimate water transit times and hydrologic tracers. SPIT tags all precipitation events at regular intervals over an extended period (monthly tags over seven years) in a hydrologic model from 2016-2022. SPIT is applied at six National Ecological Observatory Network (NEON) sites across the continental United States to calculate transit time distributions (TTD) and derive from these mean transit times (MTT), fractions of young water (Fyw), and hydrologic tracer concentrations in stream water (δ18O) within a water-tagging enabled version of the Weather Research and Forecast (WT-WRF-Hydro) model with national water model (NWM) configurations. We go on to validate WT-WRF-Hydro estimates against Butler et al. (2023), who analyzed the same NEON sites using stable water isotope data to estimate water transit times. This new tracking method provides a detailed picture of water movement and helps improve predictions about water availability in the future. This data package was originally published in January 2025. It was updated May 2025 (v2; new and modified files) and October 2025 (v3; new and modified files). File and folder names were not revised to indicate changes. See the change history section in the readme for more details. This data package contains the data and scripts used to develop the SPIT framework WT-WRF-Hydro (Water Tagging Weather Research and Forecasting Hydrologic) model and is associated with the following GitHub repository: https://github.com/zbutler33/SPIT-Framework. This data package contains five parent folders: (1) “Manipulated_outputs”, (2) “Metadata”, (3) “Observed”, (4) “Outputs”, and (5) “Scripts”. Each of these parent folders contains additional subfolders and files. Please see the FLMD (“v*_Butler_2024_WT_WRF_Hydro_flmd.csv”) for a list of all the files contained in this data package and descriptions for each. See the data dictionary (“v*_Butler_2024_WT_WRF_Hydro_dd.csv”) for definitions and units of all of the tabular (files ending in “.csv” and ".tsv") column headers.

54 ENVIRONMENTAL SCIENCES↗

Distributed Resources for the Earth System Grid Federation (ESGF) Advanced Management (DREAM). Final Report

Distributed Resources for the Earth System Grid Federation (ESGF) Advanced Management (DREAM) is a proposed system that will enable data from an infinite number of diverse sources to be organized and accessed from anywhere using any handheld or other computer device. The approach offers a powerful roadmap for the creation and integration of a unified knowledge base of an entire ecosystem, including its many geophysical, geographical, social, political, agricultural, energy, transportation, and cyber aspects. The resulting aggregation of data has the potential to generate an informational universe of unprecedented size that has never before been possible due to the prohibitive costs, managerial complexity, and technical barriers associated with ever-changing exponential-growth data flows. We envision that DREAM will accelerate discovery by enabling climate researchers, among other types of researchers, to manage, analyze, and visualize data from earth-scale measurements and simulations. DREAM’s success will be built on proven components that leverage existing services and resources. A key building block for DREAM will be the ESGF, chaired by Dean N. Williams. Expanding on the existing ESGF, the project will ensure that the access, storage, movement, and analysis of the large quantities of data that are processed and produced by diverse science projects can be dynamically distributed with proper resource management. Much of the Office of Science data is currently generated by multiple stand-alone facilities. DREAM can collect data accumulated from these facilities and incorporate it into a fully integrated network accessible from anywhere in the world. The result is a completely new paradigm shift for data management, analysis, and visualization enabling researchers to: Manage their calculations, data, tools, and research results; Ensure that all data are sharable, reproducible and (re)usable—accompanied by appropriate metadata describing its provenance, syntax, and semantics at creation; Advance application performance by selectively adapting APIs and services in response to scientific requirements and architectural complexities; and Provide scalable interactive resource management—navigate data and metadata at multiple levels, provide architecture-aware data integration, analysis and visualization tools. We will engage closely with DOE, NASA, and NOAA science groups working at the leading edge of computing. These engagements—in domains such as biology, climate, and hydrology—will allow us to advance disciplinary science goals and inform our development of technologies that can accelerate discovery across DOE more broadly. We will advertise and promote our technologies via dedicated workshops, tutorials, and sessions at conferences, stand-alone events with broad inter-disciplinary invitation, and engagements with leadership facilities.

54 ENVIRONMENTAL SCIENCES↗

High-resolution leaf area index maps generated from unoccupied aerial system, Teller Mile 27, Seward Peninsula, Alaska

Leaf area index (LAI), a measure of the amount of one-side leaf area per ground unit, is an important indicator of plant carbon, energy, and water cycle. In the heterogeneous Arctic landscapes, it has been challenging to accurately measure LAI across species and space needed for Earth system model validation. Here, we use multispectral unoccupied aerial systems (UASs) to scale up and map leaf area index (LAI) , in a low-Arctic tundra landscape on the Seward Peninsula, Alaska. We linked previous published LAI measurements with high-resolution, UAS-collected multispectral data collected over the region of Next Generation Ecosystem Experiments in the Arctic (NGEE Arctic)’s Teller Mile Maker 27 site in 2022 to develop random forest (RF) machine learning models to predict and map LAI. 100 RF models were developed to account for uncertainties in ground LAI plot measurements and process scaling. This dataset includes a raster (*.tif) map of the mean LAI value of the 100 RF models, a raster (*.tif) map of the standard deviation of the RF-modeled LAI data, and a user guide (*.pdf).

54 ENVIRONMENTAL SCIENCES↗

Data from Stewart et al. 2026 "Organic Colloid Composition in Variable-Redox Porewaters within a Mountainous Floodplain"

Redox gradients, often driven by changes in sediment moisture levels in porous, heterogeneous groundwater systems, create dynamic conditions that may promote the production and transport of colloids within natural waters. While much research has focused on the inorganic composition of colloids, the organic composition remains less well understood. Organic matter (OM) in colloids may associate with minerals, complex metal ions, and serve as an electron donor for microbial respiration; therefore, its composition is of high interest. We examined the composition of porewater OM along a redox gradient in a riparian soil located along the Slate River in Crested Butte, Colorado, USA as a function of depth (90, 130, 200, and 350 cm below ground surface). All depths were oxic to suboxic, except 200 cm, where the products of iron and sulfate reduction were observed concomitant with an increase in dissolved and/or colloidal OM, pH, alkalinity, and conductivity. We investigated the composition of porewater using correlated scanning transmission X-ray microscopy and transmission electron microscopy. We observed a change in the OM chemistry from carboxylate-rich at the 200 cm depth (where it was also enmeshed with non-crystalline iron) to phenol- and substituted-aromatic-rich at other depths. Radiocarbon dating revealed carbon in porewater at 200 cm was younger than depths above and below. Soil porewater can flow down into the underlaying gravel bed during baseflow conditions, thus we speculate whether riparian porewater could transport iron- and carboxylate-rich organic colloids into surrounding surface waters through the gravel bed conduit. This data package includes geochemical data (.csv) as a function of depth from porewaters in OBJ1. Measurements included are pH, conductivity, TOC, Fe concentration, sulfate concentration, dissolved oxygen. Additionally radiocarbon dating age of carbon in samples is provided. Additionally, this dataset contains metadata files (.csv) describing the methods, file contents, and column headers.

alpine floodplain↗

Model Data Archive Associated with Manuscript "Fire-altered Carbon Pools Create Disturbance Memory in Stream Dissolved Organic Carbon"

This data package supports the publication “Fire-altered Carbon Pools Create Disturbance Memory in Stream Dissolved Organic Carbon” by Li et al. (2026). The package contains processed model inputs, configuration files, restart files, simulation outputs, scripts, and visualization products used to evaluate post-fire dissolved organic carbon (DOC) dynamics in the Naches River Watershed, Washington, USA, following the 2021 Schneider Springs Fire. The modeling workflow couples ELM-BGC, the biogeochemistry-enabled Energy Exascale Earth System Model Land Model; ATS, the Advanced Terrestrial Simulator for integrated surface-subsurface hydrology; and PFLOTRAN, a reactive transport model for multicomponent aqueous geochemistry. Together, these models simulate how wildfire-induced changes in vegetation, litter, coarse woody debris, and soil organic matter influence DOC production, transport, and reaction from burned hillslopes to stream networks. The archive includes preprocessed meteorological, geospatial, hydrologic, and biogeochemical forcing data; ELM-BGC-derived DOC source terms; ATS mesh files; PFLOTRAN reactive-transport inputs; model configuration files; spin-up and transient restart files; watershed-scale diagnostic outputs; stream concentration time series; and figures or visualization files used to inspect and reproduce key results. File types include Hierarchical Data Format 5 (HDF5) files for gridded forcing and model-coupling data, model input and configuration files for ELM-BGC, ATS, and PFLOTRAN, restart and simulation-output files generated by the modeling workflow, tabular or time-series diagnostic outputs, scripts for post-processing and figure generation, and image or visualization products associated with the manuscript. Use of the package depends on the intended task. Re-running the simulations requires the relevant modeling software, including ELM-BGC, ATS, and PFLOTRAN as ATS's geochemical engine. Inspecting outputs and reproducing figures requires Python with scientific plotting libraries such as Matplotlib, and three-dimensional model outputs may be viewed with ParaView. Geographic information system files or maps may be inspected with ArcGIS Pro or comparable GIS software. The data package is intended to enable traceability, reuse, and partial reproduction of the coupled land-to-watershed hydro-biogeochemical modeling workflow used to test how wildfire disturbance affects terrestrial carbon pools and downstream DOC dynamics.

ATS↗

Plant Characteristics, Porewater, Gas Flux, and Soil Biogeochemistry at Council Road Site Mile Marker 71, Seward Peninsula, Alaska, 2023

Data collected at Council, AK (64°51’35.0”N 163°41’59.1”W) during a summer campaign in 2023. Water data consists of soil porewater collected by centrifuging soil cores and also by field collection with porewater samplers (rhizons). Gas data consists of CO2, CH4 and N2O surface soil fluxes measured with a portable FTIR analyzer. Plant and root data consists of biomass, root length, diameter and mass. Soil data consists of total C and N. Air, water and soil samples span two main locations: a thermokarst wetland and an upland tussock. The Next-Generation Ecosystem Experiments: Arctic (NGEE Arctic), was a research effort to reduce uncertainty in Earth System Models by developing a predictive understanding of carbon-rich Arctic ecosystems and feedbacks to climate. NGEE Arctic was supported by the Department of Energy's Office of Biological and Environmental Research.The NGEE Arctic project had two field research sites: 1) located within the Arctic polygonal tundra coastal region on the Barrow Environmental Observatory (BEO) and the North Slope near Utqiagvik (Barrow), Alaska and 2) multiple areas on the discontinuous permafrost region of the Seward Peninsula north of Nome, Alaska. Through observations, experiments, and synthesis with existing datasets, NGEE Arctic provided an enhanced knowledge base for multi-scale modeling and contributed to improved process representation at global pan-Arctic scales within the Department of Energy's Earth system Model (the Energy Exascale Earth System Model, or E3SM), and specifically within the E3SM Land Model component (ELM).This dataset was generated to broadly address the following research question: how will climate change (i.e., thawing permafrost, landscape change) alter the ecosystem flux (sink versus source) of important greenhouse gases such as CO2, CH4 and N2O?Description of the contents of this data package: This dataset contains 5 different individual .csv files containing plant, soil, water and gas data. No software is needed to utilize them. PFTCover: Plant functional type ground cover in 1x1 meter plots. SoilCores: Solidphase and porewater phase soil biogeochemical variablesPlantData: Above and belowground plant traits. GasFlux: Surface plant-soil gas measurementsFieldPorewater: Field collected porewater biogeochemical variables

54 ENVIRONMENTAL SCIENCES↗

Data for Kim et al., "Variations in the optical and molecular composition of dissolved organic matter exported from coastal wetlands"

Knowledge about sources and composition of marsh-derived dissolved organic matter (DOM) is critical for understanding the role of marshes in coastal biogeochemical cycling and the fate of marsh-derived DOM in the ocean. To investigate tidal variability in composition of marsh-derived DOM, Kim et al. examined the optical and molecular characteristics of hourly surface water samples at three tidal creeks in the Chesapeake Bay. Groundwater samples along the terrestrial landscape gradient as well as estuarine water from the adjacent estuary at each site were also collected to help resolve sources of surface water DOM. Samples were collected in summer 2024 at three sites – SWH: Sweet Hall Marsh, GCW: Kirkpatrick Marsh, and GWI: Goodwin Islands – which are part of synoptic sites in the Chesapeake Bay region of the COMPASS-FME (Coastal Observations, Mechanisms, and Predictions Across Systems and Scales - Field, Measurements, and Experiments) project. Surface water samples were collected hourly over a 48-hour period at each site. Groundwater and estuarine water samples were collected once. This dataset includes- Surface water depth and salinity- Dissolved organic carbon (DOC) and total dissolved nitrogen (TDN) concentrations- Optical indices and relative composition of parallel factor analysis (PARAFAC) components- High resolution mass spectrometry data.

54 ENVIRONMENTAL SCIENCES↗

Differential Organic Carbon Mineralization Responses to Soil Moisture in Three Different Soil Orders Under Mixed Forested System: Supporting Data

This data contains data from 90-day long incubation study which aimed to look at the soil moisture-texture relationship on soil organic carbon (SOC) cycling. Soils were collected from three distinct soil textures from mixed forests in 2017: sandy (Georgia, 2017-05-01), loamy (Missouri, 2017-06-14) and clayey (Texas, December 2017) were incubated at different soil moisture levels (air-dried, 25% water holding capacity (WHC), 50% WHC, 100% WHC and 175% WHC) at room temperature for a period of 90 days. Files contain microbial respiration, active and slow SOC pools, and their respective mineralization rates, extractable organic carbon (C), and C-acquiring extracellular enzymes. Findings from these data were used in Singh et al. (2021). This study aimed to examine the interactive effect of soil moisture and texture on SOC mineralization. Soil samples of three distinct textures (sandy, loamy, and clayey) were collected from mixed forests of Georgia, Missouri, and Texas, respectively. Soil cores of 5 cm diameter were collected from numerous random locations at each site from 0-15 cm depth after scraping the litter layer and mixed thoroughly to obtain a composite sample per site. Three additional soil cores were collected to determine the WHC using pressure plate extractors. Soil samples were composited, and triplicate soil samples were incubated in mason jars for a period of 90 days at room temperature under different moisture regimes: air dried, 25% WHC, 50% WHC, at WHC and 100% saturation. Soil respiration was measured weekly, and destructive sampling was conducted at 1, 15, 60, and 90 days to determine extractable organic C, C acquiring enzyme activity, and active and slow SOC pools with their respective mineralization rates. The C acquiring enzyme activity was the total activity of α-glucosidase, β-glucosidase, cellobiohydrolase, and β-xylosidase enzymes. Gas samples for microbial respiration measurements were collected from headspace of incubation jars through the sampling ports on the lids and then analyzed using a Shimadzu Gas Chromatograph (GC-2014). Prior to sampling, the vials were evacuated. Blank correction was also done by collecting gas samples from empty incubation jars. Double pool exponential decay model was used in SigmaPlot to determine the active and slow SOC pools and their mineralization rates (Farrar et al., 2012; Jagadamma et al., 2014). The C-acquiring extracellular enzymes were measured using the microplate method by German et al., (2011). Microbial community structure was determined using the phospholipid fatty acid (PLFA) and neutral lipid fatty acid (NLFA) analyses (Buyer and Sasser, 2012). This dataset has seven data files provided in comma-separate (*.csv) format. Additional metadata are provided: seven data dictionaries and a file-level metadata file in comma separate (*.csv) format and a user guide in PDF (*.pdf) format.

Carbon acquiring enzyme activity↗

Mind the gap: Bridging the divide between AI aspirations and the reality of autonomous microscopy

What does materials science look like in the “Age of Artificial Intelligence?” Each material’s domain—synthesis, characterization, and modeling—has a different answer to this question, motivated by unique challenges and constraints. This work focuses on the tremendous potential of autonomous characterization within electron microscopy. We present our recent advancements in developing domain-aware, multimodal models for microscopy analysis capable of describing complex atomic systems. We then address the critical gap between the theoretical promise of autonomous microscopy and its current practical limitations, showcasing recent successes while highlighting the necessary developments to achieve robust, real-world autonomy.

2D materials↗

Denudation, solute export, landscape evolution modeling, and geographic information system data for the East River watershed, Colorado, USA (2020-2024)

This data package contains geographic information system (GIS) layers and tabular datasets associated with the study of lithologic controls on denudation, solute export, carbon-scaling relationships, and transient landscape evolution in the East River watershed near Crested Butte, Colorado, USA. The package includes GIS layers used to produce the Figure 2 map, including drainage, hillshade, lithology, sample locations, and basin polygons, together with comma-separated value (CSV) tables and matching CSV data dictionaries. One group of tables reports sample-level and catchment-level information for river-sediment samples analyzed for in situ-produced cosmogenic beryllium-10 (10Be), including sample names, outlet elevations, geographic coordinates, upstream drainage area, rock-type classes, production-rate scaling scheme, analyzed nuclide, catchment-averaged denudation rates, and associated lower and upper analytical uncertainties. Sample and catchment attributes provide the basis for comparing denudation rates across intrusive, shale, sedimentary, and mixed-lithology settings. A second group of tables reports supporting information for landscape-evolution modeling and the mapped geologic framework of the study area. Included files list parameter values and definitions for the two-phase landscape-evolution simulations, summarize full-domain model erosion fluxes and topographic metrics for different simulation configurations, provide a fixed-area carbon-model scaling table, and summarize mapped geologic units within the East River study domain, including geologic code, formation name, lithologic description, mapped area, and lithologic class grouping. Model outputs and geologic summaries support interpretation of transient landscape behavior and its relation to the mapped distribution of shale, intrusive, sedimentary, and surficial units. A third group of tables reports hydrologic and hydrochemical information used to quantify dissolved export from the watershed. Included files provide site-level values for drainage area, mean annual solute export, standard error of annual export, area-normalized solute yield, and equivalent weathering rate for five East River monitoring sites, along with metadata describing the number, sampling cadence, and date range of discharge records and partial and full total dissolved solids observations used in the solute-yield analyses. The package also contains a supplementary daily ion-load time series with daily mean discharge, discharge observation counts, dissolved concentrations, and daily loads for calcium, magnesium, sodium, potassium, chloride, sulfate, nitrate, fluoride, dissolved silica, charge-balance bicarbonate, and total dissolved solids. The package contains GIS files, comma-separated value files (.csv), CSV data dictionaries, a file-level metadata table, a package-tree text file, and a readme text file.

10Be↗

Effects of 9.5 years warming on SOC concentration and composition in bulk soil and density fractions

Original data of whole-soil warming experiment after 9.5 years at Blodgett Forest Research Station. The Blodgett Forest is a mixed coniferous temperate forest with Mediterranean climate. The annual air temperature is 12.5℃ and the annual precipitation is 1774 mm yr-1- The soil is mesic ultic Alfisol of granitic origin, equivalent to Dystric Cambisol according to The World Reference Base for Soil Resources (WRB) system. The soil is warmed down to 1 m at + 4℃ by vertically installed heating cables. At the time of soil sampling on 1 May 2023, the whole-soil warming experiment had been running for approximately 9.5 years, from January 2014 to May 2023. The dataset includes: - Bulk_EA: C, N content, δ13C, and CN ratio of bulk soil; - Density_fractionation: organic carbon concentration, δ13C, and C/N ratio of free light fraction (fLF), occluded ligh fraction (oLF), and heavy fraction (HF); - PCA_DRIFT_AUC: original data of area under the curve (AUC) values of eight carbon bond types integrated on diffuse reflectance infrared fourier transform spectroscopy for each soil sample and soil fraction, which are consequently used for principal component analysis (PCA); - DRIFTS_stability_index: the calculation of aliphatic C–H (3000–2800 cm-1) to aromatic C=C (1670–1600 cm-1) ratios for each bulk soil sample and soil fraction. All data are provided in CSV format and can be viewed using Microsoft Excel.

Climate change↗

Historic climate, cosmogenic 10Be, denudation-rate, and geospatial datasets from the Pikes Peak region, Colorado, USA

This data package contains geographic information system (GIS) layers and tabular datasets associated with the study of elevation-dependent denudation rates on Pikes Peak in the Front Range of the Rocky Mountains, Colorado, USA. The package includes GIS layers used to produce the study-area map, including sample locations, sample watershed boundaries, the Pikes Peak batholith, Pleistocene glacier extent, weather station locations, and elevation and hillshade rasters, together with comma-separated value (CSV) tables and matching CSV data dictionaries. These mapped layers provide the geographic framework for interpreting denudation patterns across the Pikes Peak region and for relating sample locations to watershed geometry, bedrock setting, glacial history, and nearby climate stations. The first group of tables reports climate and geospatial context for the study area. These files include station-based temperature and precipitation data used to characterize elevational gradients in mean annual climate and monthly climate seasonality, sample locations, denudation-rate and topographic metrics, fixed frost-cracking model parameters, frost-cracking intensity and precipitation-frequency metrics, and stream-power inversion results. Together, these data provide the basis for evaluating how denudation varies with elevation, climate, and landscape form across sampled catchments on Pikes Peak. The second group of tables reports cosmogenic nuclide and erosion-model results used in the denudation analysis. Included files contain accelerator mass spectrometry (AMS) measurements for in situ-produced cosmogenic beryllium-10 (10Be), including sample identifiers, measured 10Be:9Be ratios, analytical uncertainties, carrier mass, quartz mass, blank corrections, blank-group statistics, and calculated 10Be concentrations and uncertainties. Additional tables summarize stream-power-law inversion results for sampled catchments, including optimized model parameters, predicted erosion rates, residual metrics, channel-pixel counts, and convergence status, as well as regression equations and summary statistics used to evaluate relationships among elevation, climate, frost cracking, precipitation forcing, and denudation rate. The package contains GIS files, comma-separated value files (.csv), Microsoft Excel files (.xlsx), CSV data dictionaries, a file-level metadata table, and a readme text file.

10Be cosmogenic nuclides↗

Dataset for 'Ombadi, M. & Varadharajan, C. (2022). Urbanization and aridity mediate distinct salinity response to floods in rivers and streams across the Contiguous United States, Water Research'

This package contains data sets and code used to obtain the results in Ombadi, M., & Varadharajan, C. (2022). Urbanization and aridity mediate distinct salinity response to floods in rivers and streams across the Contiguous United States. Water Research, 118664. The folder "data" contains 259 .csv files, each of which has daily time series of concurrent streamflow (Q) and specific conductance (SC) for each of the sites used in this study originally downloaded from the USGS National Water Information System (NWIS; USGS, 2016). The number of data points in each of the files is at least 3650 (i.e. 10 years of daily measurements). The folder "RF_single_data" contains 259 .csv files, each of which include data used to train and test the Random Forest models at individual sites for predicting SC during days of floods. The folder "RF_regional_data" contains 3 .csv files, each of which include scaled data compiled from all sites within each climate zone (arid, temperate and wet). "metadata.csv" contains the physical properties of the 259 catchments corresponding to the sites used in this study; this data was extracted from GAGES-II dataset (Falcone et al., 2010). "RF_implementation.ipynb" is a Jupyter notebook with the code needed to implement the analysis using Random Forest models either for individual sites or for the regional models (for each climate zone). The code utilizes the data in the two folders: "RF_single_data" and "RF_regional_data" and the metadata.csv file.

54 ENVIRONMENTAL SCIENCES↗