SEARCH · Engineering Papers

Results for “surface wetting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

All sources NASA NTRS DOE OSTI

NASA NTRS1998

Surface Area, and Oxidation Effects on Nitridation Kinetics of Silicon Powder Compacts

Commercially available silicon powders were wet-attrition-milled from 2 to 48 hr to achieve surface areas (SA's) ranging from 1.3 to 70 sq m/g. The surface area effects on the nitridation kinetics of silicon powder compacts were determined at 1250 or 1350 C for 4 hr. In addition, the influence of nitridation environment, and preoxidation on nitridation kinetics of a silicon powder of high surface area (approximately equals 63 sq m/g) was investigated. As the surface area increased, so did the percentage nitridation after 4 hr in N2 at 1250 or 1350 C. Silicon powders of high surface area (greater than 40 sq m/g) can be nitrided to greater than 70% at 1250 C in 4 hr. The nitridation kinetics of the high-surface-area powder compacts were significantly delayed by preoxidation treatment. Conversely, the nitridation environment had no significant influence on the nitridation kinetics of the same powder. Impurities present in the starting powder, and those accumulated during attrition milling, appeared to react with the silica layer on the surface of silicon particles to form a molten silicate layer, which provided a path for rapid diffusion of nitrogen and enhanced the nitridation kinetics of high surface area silicon powder.

Bhatt, R. T.↗

NASA NTRS1989

An evaluation of the interfacial bond properties between carbon phenolic and glass phenolic composites

The effects of moisture and surface finish on the mechanical and physical properties of the interfacial bond between the carbon/phenolic (C/P) and glass/phenolic (G/P) composite materials are presented. Four flat panel laminates were fabricated using the C/P and G/P materials. Of the four laminates, one panel was fabricated in which the C/P and G/P materials were cured simultaneously. It was identified as the cocure. The remaining laminates were processed with an initial simultaneous cure of the three C/P billets. Two surface finishes, one on each half, were applied to the top surface. Prior to the application and cure of the G/P material to the machined surface of the three C/P panels, each was subjected to the specific environmental conditioning. Types of conditioning included: (1) nominal fabrication environment, (2) a prescribed drying cycle, and (3) a total immersion in water at 160 F. Physical property tests were performed on specimens removed from the C/P materials of each laminate for determination of the specific gravity, residual volatiles and and resin content. Comparisons of results with shuttle solid rocket motor (SRM) nozzle material specifications verified that the materials used in fabricating the laminates met acceptance criteria and were representative of SRM nozzle materials. Mechanical property tests were performed at room temperature on specimens removed from the G/P, the C/P and the interface between the two materials for each laminate. The double-notched shear strength test was used to determine the ultimate interlaminar shear strength. Results indicate no appreciable difference in the C/P material of the four laminates with the exception of the cocure laminate, where 20 percent reduction in the strength was observed. The most significant effect and the ultimate strength was significantly reduced in the wet material. No appreciable variation was noted between the surface finishes in the wet laminate.

Jordan, Kelvin↗

DOE OSTI2022

Estimated timescales for wet deposition of organic compounds as a function of Henry's law constants

Atmospheric organic compounds may deposit to Earth's surfaces via dry deposition, driven by concentration gradients, and wet deposition, driven by the scavenging of compounds by precipitation. Their removal by deposition has downstream impacts on concentrations of secondary organic aerosol by removing potential aerosol precursors that would otherwise oxidize to form particulate matter. The impact of deposition processes can consequently be considered as competition between rates of oxidation and deposition, but timescales for deposition are not well constrained. While timescales for dry deposition have been estimated and experimentally validated in the past, understanding of wet deposition of organics is still very limited. In this work, we estimate the wet deposition timescale for gas-phase organic compounds in the atmosphere as a function of Henry's law constants, H, using real-world precipitation frequency and size distributions at five globally-distributed sites. The wet deposition timescale decreases significantly with the increase of H until reaching a stable minimum for compounds with H > 10 5 M per atm. We estimate that the median wet deposition timescale for highly soluble gases is approximately 5 hours during a continuous rain event for all sites. However, median estimated timescales ranged from 80 to 200 hours, depending on location. Timescales are found to depend primarily on the frequency and duration of precipitation events rather than their intensity or size characteristics. Based on these data, we demonstrate that timescales for wet deposition of gases can be estimated at any given location using only basic precipitation information, without detailed or high-precision measurements.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2025

Improved Representations of Land‐Atmosphere Interactions Over the Continental U.S. Through Dynamic Root Modeling

Previous studies have identified the oversimplified root system representation as a key factor leading to inaccuracies in vegetation‐atmosphere feedbacks. In this study, a dynamic root water uptake scheme in the Noah‐MP land surface model has been coupled to the Weather Research and Forecasting (WRF) model to investigate its impact on the surface hydroclimate variables and land‐atmosphere interactions. To evaluate the impact of the dynamic root, two coupled simulations were conducted, one with the dynamic root water uptake scheme (DynRt) and one with the static root water uptake scheme (StcRt), which is based on the default root representation in Noah‐MP, with slight modifications, primarily in vegetation‐related parameters. Both DynRt and StcRt simulations were conducted with a small ensemble of three members to account for variations in physical parameterizations, initial and boundary forcing and model setup. When compared with reference data sets, the DynRt simulations show improved results than the StcRt simulations, reducing biases in the simulated leaf area index, surface energy fluxes, soil moisture and precipitation. Two different mechanisms through which roots affect land‐atmosphere coupling have been identified. Over the transitional climate zone between the dry and wet climate, the dynamic root scheme affects surface climate and land‐atmosphere coupling mainly through changes in soil moisture through hydraulic redistribution by plant root system. Over the energy‐limited mesic zone, the dynamic root affects regional land‐atmosphere coupling mainly through changes in carbon allocation. This work highlights the importance of dynamic root representation in improving vegetation‐atmosphere simulations by enhancing predictions of water, energy, and carbon fluxes.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2026

Elucidating hydrogen isotope transport mechanisms in proton-conducting ceramics with trapping effects using TMAP8

Hydrogen isotopes play an central role in many science and engineering applications such as fuel cells, hydrogen production, and fusion energy. For these applications, hydrogen separation and extraction applications are pivotal aspects of hydrogen transports, where proton-conducting ceramics (PCCs) have shown great potential. In this study, we propose a new model for hydrogen isotope transport in PCC materials, BaZr 0.9 Y 0.1 O 2.95 (BZY) in particular, which captures behavior in both dry and wet environments. The model expands previous efforts and considers diffusion, trapping, and surface reactions (i.e., dissociation and recombination). We then validate and calibrate the model using deuterium transport measurements from experiments in both dry and wet environments. This study highlights the key role of trapping, often neglected, on hydrogen isotope transport in BZY and other PCC materials. It also explains how the commonly observed discrepancy between dry and wet behavior can be attributed to more active surface reactions and saturated traps due to the increased hydrogen presence under the wet environment. These results provide insights to optimize PCC manufacturing and usage as a hydrogen separation and extraction technology in various fields, emphasizing that lowering the trapping can reduce hydrogen isotope retention. These modeling and calibration efforts are performed using the tritium migration analysis program, version 8 (TMAP8), an open-source application designed for hydrogen isotope transport.

36 - MATERIALS SCIENCE↗

NASA NTRS1981

Tribology experiment

A two-dimensional concept for Spacelab rack 7 was developed to study the interaction of liquid lubricants and surfaces under static and dynamic conditions in a low-gravity environment fluid wetting and spreading experiments of a journal bearing experiments, and means to accurately measure and record the low-gravity environment during experimentation are planned. The wetting and spreading process of selected commercial lubricants on representative surface are to the observes in a near-zero gravity environment.

Wall, W. A.↗

NASA NTRS2005

The Rio Tinto Basin, Spain: Mineralogy, Sedimentary Geobiology, and Implications for Interpretation of Outcrop Rocks at Meridiani Planum, Mars

Exploration by the NASA rover Opportunity has revealed sulfate- and hematite-rich sedimentary rocks exposed in craters and other surface features of Meridiani Planum, Mars. Modern, Holocene, and Plio-Pleistocene deposits of the Rio Tinto, southwestern Spain, provide at least a partial environmental analog to Meridiani Planum rocks, facilitating our understanding of Meridiani mineral precipitation and diagenesis, while informing considerations of martian astrobiology. Oxidation, thought to be biologically mediated, of pyritic ore bodies by groundwaters in the source area of the Rio Tinto generates headwaters enriched in sulfuric acid and ferric iron. Seasonal evaporation of river water drives precipitation of hydronium jarosite and schwertmannite, while (Mg,Al,Fe(sup 3+))-copiapite, coquimbite, gypsum, and other sulfate minerals precipitate nearby as efflorescences where locally variable source waters are brought to the surface by capillary action. During the wet season, hydrolysis of sulfate salts results in the precipitation of nanophase goethite. Holocene and Plio-Pleistocene terraces show increasing goethite crystallinity and then replacement of goethite with hematite through time. Hematite in Meridiani spherules also formed during diagenesis, although whether these replaced precursor goethite or precipitated directly from groundwaters is not known. The retention of jarosite and other soluble sulfate salts suggests that water limited the diagenesis of Meridiani rocks. Diverse prokaryotic and eukaryotic microorganisms inhabit acidic and seasonally dry Rio Tinto environments. Organic matter does not persist in Rio Tinto sediments, but biosignatures imparted to sedimentary rocks as macroscopic textures of coated microbial streamers, surface blisters formed by biogenic gas, and microfossils preserved as casts and molds in iron oxides help to shape strategies for astrobiological investigation of Meridiani outcrops.

Fernandez-Remolar, David C.↗

NASA NTRS1976

The prediction of zenith range refraction from surface measurements of meteorological parameters

In the last two decades, increasingly sophisticated deep space missions have placed correspondingly stringent requirements on navigational accuracy. As part of the effort to increase navigational accuracy, and hence the quality of radiometric data, much effort has been expended in an attempt to understand and compute the tropospheric effect on range (and hence range rate) data. The general approach adopted has been that of computing a zenith range refraction, and then mapping this refraction to any arbitrary elevation angle via an empirically derived function of elevation. The prediction of zenith range refraction derived from surface measurements of meteorological parameters is presented. Refractivity is separated into wet (water vapor pressure) and dry (atmospheric pressure) components. The integration of dry refractivity is shown to be exact. Attempts to integrate wet refractivity directly prove ineffective; however, several empirical models developed by the author and other researchers at JPL are discussed. The best current wet refraction model is here considered to be a separate day/night model, which is proportional to surface water vapor pressure and inversely proportional to surface temperature. Methods are suggested that might improve the accuracy of the wet range refraction model.

Berman, A. L.↗

NASA NTRSDate not supplied

Operational and Archive Data Records: Surface Elevation Measurements of Lakes, Wetlands, and Rivers for Resources and Hazards

A NASA/USDA funded program offers satellite-derived products for lakes, reservoirs, river reaches, and wetland zones. These are currently being derived from the 10-day and monthly-resolution radar altimeter series. However, observational parameters from the laser based ICESat-2 mission, and the enhanced SWOT KaRIn instrument will also be integrated to meet various end user requirements. The resulting measurements will ultimately be a combination of surface water level and slope, surface water extent, water storage and basin bathymetry, plus a suite of Status Indicators which highlight deviations from long-term and seasonal averages. The main stakeholders are the USDA/Foreign Agricultural Service, the US Geological Survey, USACE/NGA, and various Wetland-related organizations. Applications centre on water and energy resources and fish-catch potential, and on natural hazards (floods and droughts). There is a demand for a global monitoring service, but primary focus is on regions where gauge measurement access is restricted or delayed, or where gauge deployment is hazardous. Ongoing surface acquisition checks and feedback to CNES focusses on the success or failure of the on-board DEM’s on a case-by-case basis. Multiple projects are also underway to improve the surface elevations measurements and the along track resolution (minimum water body width) via exploration of the high resolution (Doppler) Range estimates, the FF-SAR technique, and the high- resolution radiometer based wet tropospheric correction. And while Level3+4 surface water products are being directed by end user requirements, the overriding NASA objectives are the formation of high quality Earth Data Records with high accuracy and uniformity across multiple decades.

Lakes↗

NASA NTRS1998

Dynamics of Liquids in Edges and Corners (DYLCO): IML-2 Experiment for the BDPU

Knowledge of the behavior of fluids possessing free surfaces is important to many fluid systems, particularly in space, where the normally subtle effects of surface wettability play a more dramatic and often surprising role. DYLCO for the IML-2 mission was proposed as a simple experiment to probe the particular behavior of capillary surfaces in containers of irregular cross section. Temperature control was utilized to vary the fluid-solid contact angle, a questionable thermodynamic parameter of the system, small changes in which can dramatically influence the configuration, stability, and flow of a capillary surface. Container shapes, test fluid, and temperature ranges were selected for observing both local changes in interface curvature as well as a global change in fluid orientation due to a critical wetting phenomenon. The experiment hardware performed beyond what was expected and fluid interfaces could be readily digitized post flight to show the dependence of the interface curvature on temperature. For each of the containers tested surfaces were observed which did not satisfy the classic equations for the prediction of interface shape with constant contact angle boundary condition. This is explained by the presence of contact angle hysteresis arising from expansion and contraction of the liquid during the heating and cooling steps of the test procedure. More importantly, surfaces exceeding the critical surface curvature required for critical wetting were measured, yet no wetting was observed. These findings are indeed curious and pose key questions concerning the role of hysteresis for this critical wetting phenomena. The stability of such surfaces was determined numerically and it is shown that stability is enhance (reduced) when a surface is in its 'advancing' ('receding') state, The analysis shows complete instability as the critical wetting condition is reached. The case of ideal dynamic wetting is addressed analytically in detail with results of significant flow characteristics presented in closed form. The solutions indicate a square root of T dependence of the capillary 'rise' rate which is corroborated by drop tower tests. The analysis clearly shows that infinite time is necessary for surfaces to reorient at the critical wetting transition.

Langbein, D.↗

NASA NTRS1999

Origin and Reactivity of the Martian Soil: A 2003 Micromission

The role of water in the development of the martian surface remains a fundamental scientific question. Did Mars have one or more "warm and wet" climatic episodes where liquid water was stable at the surface? If so, the mineral phases present in the soils should be consistent with a history of aqueous weathering. More generally, the formation of hydrated mineral phases on Mars is a strong indicator of past habitable surface environments. The primary purpose of this investigation is to help resolve the question of whether such aqueous indicators are present on Mars by probing the upper meter for diagnostic mineral species. According to Burns [1993], the formation of the ferric oxides responsible for the visible color of Mars are the result of dissolution of Fe (+2) phases from basalts followed by aqueous oxidation and precipitation of Fe" mineral assemblages. These precipitates likely included iron oxyhydroxides such as goethite (a-FeOOH) and lepidocrocite (g-FeOOH), but convincing evidence for these phases at the surface is still absent. The stability of these minerals is enhanced beneath the surface, and thus we propose a subsurface search for hydroxylated iron species as a test for a large-scale chemical weathering process based on interactions with liquid water. It is also possible that the ferric minerals on Mars are not aqueous alteration products of the rocks. A chemical study of the Pathfinder landing site concluded that the soils are not directly derived from the surrounding rocks and are enhanced in Mg and Fe. The additional source of these elements might be from other regions of Mars and transported by winds, or alternatively, from exogenic sources. Gibson [1970] proposed that the spectral reflectivity of Mars is consistent with oxidized meteoritic material. Yen and Murray [1998] further extend Gibson's idea and show, in the laboratory, that metallic iron can be readily oxidized to maghemite and hematite under present-day martian surface conditions (in the absence of liquid water). A test for a meteoritic component of the soil can be conducted, as described below, by searching for the presence of Ni at the martian surface. The average abundance of nickel in an Fe-Ni meteorite is about 7% and, if present at measurable levels in the soil, would be indicative of an exogenic contribution. In addition, it may be possible to directly search for mineral phases common in meteorites. An understanding of the formation and evolution of the martian soil would not be complete without addressing the unusual reactivity discovered by the Viking Landers The presence of an inorganic oxidant, possibly one produced as a results of photochemical processes, is the most widely accepted explanation of the Viking results. Are these chemical species simply adsorbed on soil grains, or have they reacted with the metal oxide substrates and altered the mineral structures? Could a completely different (non-photochemical) process be responsible for the soil reactivity? The various ideas for the nature of this putative oxidant could be constrained by a measurement of the change in reactivity with depth. Different compositions will have different lifetimes and mobilities and thus will have different vertical profiles. Because the oxidizing compounds are believed to actively destroy organic molecules, determination of the reactivity gradient also has significant implications for the search for life on Mars. A DS2-based microprobe system can be instrumented for a 2003 micromission to investigate the origin and reactivity of the martian soil. These measurements would provide invaluable information regarding the climate history and exobiological potential of the planet. The NMR, X ray and chemiresistor measurement approach described embodies a highly synergistic and general set of soil interrogation methods for elements, compounds, and crystal structures and can also be applied to other geologic questions of interest. For example, if the capability for precise targeting of the probes is available, then in-situ investigations of suspected evaporite and hydrothermal deposits would be possible with the same set of instruments. Additional information is contained in the original.

Yen, Albert S.↗

NASA NTRS1980

The enhanced oxidation of SO2 by NO2 on carbon particulates

The oxidation of SO2 on carbon particles in dry air and in air at 65% relative humidity (RH) was found to be greatly enhanced by the presence of gaseous NO2. Exposures of 20-80ppm SO2 + 10ppm NO2 on 1-mg samples of commercial carbon black were found to produce both sorption and desorption coverages (weight retained after desorption into N2) of over one order of magnitude greater than for corresponding SO2 exposures. Significant agglomeration and wetting were observed to occur progressively during exposures at 65% RH, and samples, even after 150-h exposure, rarely reached steady-state weight gain. The wetting may have regenerated fresh reactive carbon surface. Sorptions conducted in nitrogen atmospheres, rather than in air, appeared to produce slightly higher sorptions and weight retentions for equivalent exposure concentrations and times, indicating that NO2 served as the oxidizer and that molecular oxygen, or some trace constitutents in air, may have weakly inhibited the oxidation by NO2. Wet chemical analysis of the desorbed phase indicated that sulfate, presumably H2SO4 accounted for over half of the retained weight. Measurements of pH from water-quenched samples indicated a highly acidic surface phase, and suggested the oxidation process could proceed in an acidic environment.

Cofer, W. R., III↗

NASA NTRS1978

Documentation of a ground hydrology parameterization for use in the GISS atmospheric general circulation model

The moisture transport processes related to the earth's surface relevant to the ground circulation model GCM are presented. The GHM parametrizations considered are: (1) ground wetness and soil parameters; (2) precipitation; (3) evapotranspiration; (4) surface storage of snow and ice; and (5) runout. The computational aspects of the GHM using computer programs and flow charts are described.

Lin, J. D.↗

NASA NTRS1980

Surface effects on the microwave backscatter and emission of snow

Measurements were performed with active and passive microwave sensors for both dry and wet snow conditions. A layer of Rayleigh scatterers with irregular surface boundaries is found to be a reasonable model for interpreting passive and active measurements in X- and Ku-bands. It was found that roughness had a significant effect on both backscatter and emission from wet snow; however, only a small effect was noted for dry snow.

Fung, A. K.↗

NASA NTRS2012

Translation of Land Surface Model Accuracy and Uncertainty into Coupled Land-Atmosphere Prediction

Land-atmosphere (L-A) Interactions playa critical role in determining the diurnal evolution of both planetary boundary layer (PBL) and land surface heat and moisture budgets, as well as controlling feedbacks with clouds and precipitation that lead to the persistence of dry and wet regimes. Recent efforts to quantify the strength of L-A coupling in prediction models have produced diagnostics that integrate across both the land and PBL components of the system. In this study, we examine the impact of improved specification of land surface states, anomalies, and fluxes on coupled WRF forecasts during the summers of extreme dry (2006) and wet (2007) land surface conditions in the U.S. Southern Great Plains. The improved land initialization and surface flux parameterizations are obtained through the use of a new optimization and uncertainty estimation module in NASA's Land Information System (US-OPT/UE), whereby parameter sets are calibrated in the Noah land surface model and classified according to a land cover and soil type mapping of the observation sites to the full model domain. The impact of calibrated parameters on the a) spinup of the land surface used as initial conditions, and b) heat and moisture states and fluxes of the coupled WRF Simulations are then assessed in terms of ambient weather and land-atmosphere coupling along with measures of uncertainty propagation into the forecasts. In addition, the sensitivity of this approach to the period of calibration (dry, wet, average) is investigated. Finally, tradeoffs of computational tractability and scientific validity, and the potential for combining this approach with satellite remote sensing data are also discussed.

Santanello, Joseph A.↗

NASA NTRS2012

Impact of Calibrated Land Surface Model Parameters on the Accuracy and Uncertainty of Land-Atmosphere Coupling in WRF Simulations

Land-atmosphere (L-A) interactions play a critical role in determining the diurnal evolution of both planetary boundary layer (PBL) and land surface temperature and moisture budgets, as well as controlling feedbacks with clouds and precipitation that lead to the persistence of dry and wet regimes. Recent efforts to quantify the strength of L-A coupling in prediction models have produced diagnostics that integrate across both the land and PBL components of the system. In this study, we examine the impact of improved specification of land surface states, anomalies, and fluxes on coupled WRF forecasts during the summers of extreme dry (2006) and wet (2007) land surface conditions in the U.S. Southern Great Plains. The improved land initialization and surface flux parameterizations are obtained through the use of a new optimization and uncertainty estimation module in NASA's Land Information System (LIS-OPT/UE), whereby parameter sets are calibrated in the Noah land surface model and classified according to a land cover and soil type mapping of the observation sites to the full model domain. The impact of calibrated parameters on the a) spinup of the land surface used as initial conditions, and b) heat and moisture states and fluxes of the coupled WRF simulations are then assessed in terms of ambient weather and land-atmosphere coupling along with measures of uncertainty propagation into the forecasts. In addition, the sensitivity of this approach to the period of calibration (dry, wet, average) is investigated. Finally, tradeoffs of computational tractability and scientific validity, and the potential for combining this approach with satellite remote sensing data are also discussed.

Santanello, Joseph A., Jr.↗

NASA NTRS1987

Soil moisture estimation using GOES-VISSR infrared data - A case study with a simple statistical method

Five days of clear sky observations of Kansas and Nebraska are used to examine the statistical relationship between soil moisture and infrared surface temperature observations taken from a geosynchronous satellite. Linear regression is used to relate soil moisture to surface temperature and other variables that represent wind speed, vegetation cover, and low-level temperature advection. Results show good agreement between estimated and observed soil moisture features on each of the 5 days. The average coefficient of determination for five pseudoindependent tests in which the test day is held out of the regression is 0.71. It is shown that a depletion coefficient of 0.92, when used to compute antecedent precipitation index (API), produces the best correlation between API and soil moisture as inferred from GOES thermal infrared data. By averaging daily predicted values over the 5-day rain-free case study period, 92 percent of the variance of the morning surface temperature change is explained by a simple multiple linear regression with all independent variables, or, alternatively, 85 percent of the observed variance in API is explained. It is concluded that this approach can distinguish at least four classes of soil wetness, but the necessity for measurement of surface advection may limit its usefulness in remote areas.

Wetzel, Peter J.↗

DOE OSTI2020

Towards a high-performance garnet-based solid-state Li metal battery: A perspective on recent advances

Garnet-based solid-state Li metal batteries have been widely considered one of the most promising next-generation energy storage systems. However, the performance of these batteries is plagued by various limitations caused by the solid-state electrolyte (SSE). The poor wetting of lithium on the garnet surface diminishes the contact between the anode and electrolyte, leading to extremely high anode interfacial resistance. Similarly, the point-to-point contact between the cathode and electrolyte leads to high impedance on the cathode side. Moreover, although the SSE serves a firm barrier separating the anode and cathode, lithium dendrites can still grow through, causing a short circuit. Lastly, the solid/solid interface cannot be well maintained under cycling at high current density and capacity. Recently, remarkable progress has been achieved in garnet electrolyte to resolve these problems towards the aim of a high-performance solid-state Li metal battery. In this perspective, we highlight various recent advances in the field of garnet-based solid-state battery, including improving the anode/electrolyte interface, lithium dendrite detection, reducing cathode impedance, and electrolyte architecture design.

25 ENERGY STORAGE↗