Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “surface area”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Layer-structured triple-conducting electrocatalyst for water-splitting in protonic ceramic electrolysis cells: Conductivities vs. activity

Electron, proton and oxygen-triple-conducting materials are becoming the dominant steam electrode candidate to break the rate limit on the water-splitting reaction that throttles the performance of protonic ceramic electrolysis cells (PCECs). In this study, based on Pr 2 NiO 4+δ Ruddlesden-Popper phase, we manipulate these conductivities by Pr-site Ba substitution to probe the correlation of each conductivity with the kinetics of the elementary reaction steps. It is found that the proton conductivity is vital to sustain an extended active surface area for faster adsorption of reactants and desorption of products. The effect of oxygen conductivity is surprisingly found insignificant in the water-splitting reaction. On the contrary, surface oxygen removal is discovered as the most rate-limiting process. The electronic conductivity is not a direct limiting factor. However, an electron transfer process between the current collector and the electrode junction could introduce extra resistance that is perceptible at a high operating temperature range. The best water-splitting activity is obtained on a proton conductivity/oxygen surface desorption capability well-balanced sample after Ba substitution. As a result, a water-splitting reaction resistance of 0.022 Ωcm 2 , a current density of 1.96 A/cm 2 at 700 °C is achieved on Pr 1.7 Ba 0.3 NiO 4+δ , one of the best performances for PCECs.

25 ENERGY STORAGE↗
DOE OSTI2020

Chemically Controllable Porous Polymer–Nanocrystal Composites with Hierarchical Arrangement Show Substrate Transport Selectivity

Functional organic–inorganic hybrid materials with tunable properties are useful across many application areas, ranging from gas storage to electronics, flame retardants, separations, and catalysis. Combining polymers, with a suite of functional groups and conformational flexibility, and inorganic nanoparticles, with tunable surface chemistry and composition, yields hybrids with novel functional properties. Specifically, in catalysis, control of the electronic environment at a metal interface is paramount in determining the catalytic properties. In this contribution, we describe a modular process to prepare porous polymer–nanocrystal (NC) composites in a hierarchical, multilayered synthesis, in which multiple parameters can be accurately tuned: polymer functional groups and the corresponding pore structure, the polymer layer thickness, and the NC size, shape, and composition. This process provides for a variety of controlled materials with high surface area, tunable chemistry, and thermal and chemical stabilities. Furthermore, we demonstrate their utility for shape- and size-selective catalytic conversions both in oxidation and hydrogenation reactions, where they show increased selectivity by orders of magnitude compared to conventional polymer-supported metal catalysts. In light of the high degree of control in the composite structure, this method allows for the design and realization of catalysts for several reactions and reaction environments and for nanomaterials with other applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

rabpro: global watershed boundaries, river elevation profiles, and catchment statistics

River and Basin Profiler (rabpro) is a Python package to delineate watersheds, extract river flowlines and elevation profiles, and compute watershed statistics for any location on the Earth’s surface. As fundamental hydrologically-relevant units of surface area, watersheds are areas of land that drain via aboveground pathways to the same location, or outlet. Delineations of watershed boundaries are typically performed on digital elevation models (DEMs) that represent surface elevations as gridded rasters. Depending on the resolution of the DEM and the size of the watershed, delineation may be very computationally expensive. With this in mind, we designed rabpro to provide user-friendly workflows to manage the complexity and computational expense of watershed calculations given an arbitrary coordinate pair. In addition to basic watershed delineation, rabpro will extract the elevation profile for a watershed’s mainchannel flowline. This enables the computation of river slope, which is a critical parameter in many hydrologic and geomorphologic models. Finally, rabpro provides a user-friendly wrapper around Google Earth Engine’s (GEE) Python API to enable cloud-computing of zonal watershed statistics and/or time-varying forcing data from hundreds of available datasets. Altogether, rabpro provides the ability to automate or semi-automate complex watershed analysis workflows across broad spatial extents.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Unveiling the Origin of Morphological Instability in Topologically Complex Electrocatalytic Nanostructures

Coarsening and degradation phenomena in metals have largely focused on thermally driven processes, such as bulk and surface diffusion. However, dramatic coarsening has been reported in high-surface-area, nanometer-sized Pt-based catalysts during potential cycling in an electrolyte at room temperature─a temperature too low for the process to be explained purely by surface mobility values measured in both vacuum and electrolytes (∼10 –22 and ∼10 –18 cm 2 /s, respectively). This morphological evolution must be due to a different mechanism for mass transport that is sensitive to electrochemical conditions (e.g., electrolyte composition, potential limits, and scan rate). However, there have been no notable studies of electrochemically induced coarsening in nanometer-sized electrocatalysts. Here, we unveil the origins of coarsening in an electrolyte through coupled in situ experiments and atomistic kinetic Monte Carlo (kMC) simulations. Our work demonstrates electrochemical coarsening is driven by two concurrent mechanisms that can be explained at the atomistic level: (i) dissolution/redeposition during the reduction of an oxidized species and (ii) rapid surface diffusion of undercoordinated atoms.

gold↗
DOE OSTI2021

Identification of Active Metal Carbide and Nitride Catalytic Facets for Hydrodeoxygenation Reactions

The catalytic hydrodeoxygenation (HDO) reaction is of considerable interest for biomass conversion to valuable chemicals and fuels, where one of the critical bottlenecks is the lack of cost-effective and efficient catalysts. To discover cost-efficient catalysts for the HDO reaction, we employed a density functional theory-based hierarchical catalyst design strategy based on catalytic descriptors, reaction energy profiles, and microkinetic modeling (MKM). We focused on the carbide and nitride catalyst space, for which we calculated 121 catalyst surfaces of Mo 2 C, MoC, Mo 2 N, W 2 C, NbC, VC, VN, and NbN catalysts. Based on the computed surface energies, reaction energies of oxygen removal, carbon binding strength, and the surface area of nanoparticles, the likely active facets are the Mo 2 C(111), MoC(011), VN(100), Mo 2 N(001), Mo 2 N(011), and Mo 2 N(100) surfaces. Further, detailed energy profiles were obtained, and MKM was performed for a model reaction (glycolaldehyde + 2H 2 . ethylene + 2H 2 O) on the Mo 2 C(111), VN(100), and MoC(100) surfaces. Based on the computed volcano map obtained from MKM, the predicted active facets for this HDO reaction are the Mo 2 C(111), MoC(011), VN(011), Mo 2 N(001), Mo 2 N(011), and Mo 2 N(100) surfaces. Additionally, none of the carbide and nitride catalyst surfaces are located in the optimal catalytic activity part. Therefore, it is essential to modify the catalyst via adding dopants or alloying to improve the catalytic activity. Catalytic modifications that can destabilize the surface adsorption of O*/H 2 O* and decrease the energy barriers of O-H bond formation are recommended to facilitate the HDO on the carbide and nitride catalysts. These a priori investigations provide guidelines for future low-cost HDO catalyst development.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Performance of a large area photon detector for rare event search applications

We present the design and characterization of a large-area Cryogenic PhotoDetector designed for active particle identification in rare event searches, such as neutrinoless double beta decay and dark matter experiments. The detector consists of a 45.6 cm 2 surface area by a 1-mm-thick 10.6 g Si wafer. It is instrumented with a distributed network of Quasiparticle-trap-assisted Electrothermal feedback Transition-edge sensors with superconducting critical temperature T c = 41.5 mK to measure a thermal phonons released from interactions with photons.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

Review—Development of Highly Active and Stable Catalyst Supports and Platinum–Free Catalysts for PEM Fuel Cell

Metal-free, metal-containing, and template-assisted metal-containing nitrogen-modified carbon-based catalysts carbon composite supports, and highly active and electrochemically stable hybrid cathode catalysts for oxygen reduction reaction are reviewed in this manuscript. Here, novel procedures are developed for the synthesis of (i) highly catalytically active PGM-free catalyst and stable carbon composite catalyst supports. The carbon composite catalyst supports are engineered with optimized BET surface area and pore size distribution and with a well-defined kinetic and mass transfer region during the reaction and their performance is dicussed in detail in this review. The surface activation results in increasing carbon graphitization and inclusion of non-metallic active sites on the support surface. The USC catalysts exhibit the initial performance of 0.91 V and a maximum power density of 177 mW cm –2 , with well-defined kinetic and mass-transfer regions and ~2.5% H 2 O 2 production. Activated carbon composite support (ACCS) is modified to optimize its kinetic activity and its electrochemical stability shows excellent thermal stability and support stability under simulated start-up/shut-down operating conditions. The stabilities of various supports developed in this study are compared with those of a commercial Pt/C catalyst. The active sites for the ORR identified with electrochemical and physicochemical methods are pyridinic-N and quaternary-N.

25 ENERGY STORAGE↗
DOE OSTI2022

Application of Liquid Metals in Nano Particles and Vitrimers (Summer Quarter Report)

The melting points of pure elemental metals can be decreased by forming liquid metal alloys at the eutectic point composition. Utilizing this unique characteristic, the desirable properties of electron rich metals can be incorporated into new materials and applications. Liquid metals can be made into nanoparticles (LMNP), allowing for increased surface areas of a highly tunable and functional metal oxide skins. Careful characterization is important for understanding LMNP with many methods available to not only investigate size and distribution, but also surface chemistries. This is a review article written to fulfill the UO KCGIP Masters Program requirements.

36 MATERIALS SCIENCE↗
DOE OSTI2023

5-year Infrastructure plan at FNAL

Fermilab's 5-year infrastructure plan aims to create a sustainable, safe, and long-lasting pavement network by prioritizing lower-rated pavements first for regular maintenance. FNAL should address the most distressed areas promptly, to extend sitewide pavement longevity and reduce overall maintenance costs. This approach compounds improvements by freeing future year’s capital for more routine pavement maintenance. This allows greater surface areas to be addressed each year, until a sustainable cycle can be achieved. The continually improvements enhance safety, benefit employees, visitors, and equipment transportation while aligning with Fermilab's commitment to environmental responsibility.

Washington, Davion↗
DOE OSTI2026

Dynamic Electric Field Assisted CO 2 Methanation

Energy-efficient advanced chemical reactions are essential for accelerating the growth of hydrocarbon economy. Sabatier reaction stands out for its potential to effectively transform carbon dioxide into valuable hydrocarbons and is an asset for long-duration Mars missions. This study explores a novel catalytic approach that harnesses electric field-assisted catalysis to substantially enhance the efficiency of the Sabatier reaction. Application of a dynamically perturbed electric field at 1000 Hz resulted in remarkable enhancements, increasing methane formation rates by over 100% at 350 °C and by 74% at 400 °C. Post-reaction catalyst characterization further revealed reduced blockage of active catalytic surface area under the applied electric field, emphasizing improved catalytic longevity and sustained activity. These results underscore the potential of tailored electric field waveforms to dynamically modulate elementary reaction kinetics and surface processes, positioning electric field-assisted catalysis as a transformative strategy for energy-efficient, cost-effective chemical manufacturing and energy conversion technologies.

42 - ENGINEERING↗
DOE OSTI2026

HIGHER EFFICIENCY FISSION COUNTER FOR NEUTRON DETECTION

Fission chambers containing 235U have been used for detection of neutrons for many decades. In these chambers 235U is electroplated on a metal which is one plate of an ionization chamber. Since the range of fission products from induced fission in the chamber is extremely short, these deposits from electroplating are so thin that the amount of 235U results in low neutron detection efficiency and the chamber needs high internal 235U surface area to increase efficiency. A typical ~8 in. long, ~2 in. diameter fission counter only contains < 2 g of 235U total, resulting in very low detection efficiency per incident neutron impinging on the outer surface of the detector. However, because of their large electronic pulses from fission products compared to gamma rays it is very easy to discriminate against gamma rays impinging on the detector. These types of chambers are produced commercially and are used worldwide in nuclear research and nuclear power reactors. ORNL has made a higher efficiency fission ionization chamber by using many thin concentric annuli to increase the area. A higher efficiency fission counter would be useful and can be made by incorporating 235U into a glass or ceramic scintillator. For nearly 100 years the green color in antique glass was produced by incorporation of depleted uranium (up to 20 wt. %) into a glass. The concept for this scintillation-optical-based fission detector is to dope a scintillator (either ceramic or glass) with 235U. Glass scintillators are commercially available doped with as much as 8 wt. % 6Li for neutron detection. In the 235U doped scintillator the fission product pulses would be double the size of those in an ion chamber since all fission products produce light in the scintillator whereas in the ionization chamber half do not go into the ionizing gas volume. These higher efficiency fission chambers would be very useful for a wide variety of research, nuclear research, and nuclear power reactor applications. Because of their smaller size and weight, they should be useful for space application such as monitoring of space nuclear power reactors. This report reviews existing fission chamber technology and suggests the development of these small high-efficiency fission chambers. Other fission isotopes could be used for other research applications.

Mihalczo, John [ORNL] (ORCID:0000000254292681)↗
DOE OSTI2021

A multi-phase-field model of topological pattern formation during electrochemical dealloying of binary alloys

Porous metal structures produced by electrochemical dealloying have been extensively studied for use in various applications that require high surface areas. A new comprehensive multi-phase-field (MPF) model is proposed to study topological porous patterns formed by spontaneously etching a bulk binary alloy that involves electrochemical reactions, bulk and surface diffusion, ion transport, applied electrode potential, and charge conservation. The governing equations for the alloy-porous cluster-electrolyte system account for a generalized Butler-Volmer electrochemical reaction and are in accordance with the classical nucleation theory. Based on a quantitative examination of the effects of electrode potential and precursor composition, the simulation results reproduce typical phenomena including passive surface dealloying, active porosity evolution, critical potential, and characteristic length scale in two-dimension (2-D) and three-dimension (3-D). To consider more complicated dealloying systems, the evolutions of a bimodal porous metal structure, nanocomposite, and nested porous network with a structured hierarchy are investigated. Finally, the proposed model can be a useful tool for understanding and predicting the morphology evolution of diverse porous structures during electrochemical dealloying.

Hierarchical porous structure↗
DOE OSTI2021

Precise Identification and Characterization of Catalytically Active Sites on the Surface of γ‐Alumina**

Abstract γ‐alumina is one of the oldest and most important commercial catalytic materials with high surface area and stability. These attributes enabled its use as the first commercial large‐scale heterogeneous catalyst for ethanol dehydration. Despite progress in materials characterization the nature of the specific sites on the surface of γ‐alumina that are responsible for its unique catalytic properties has remained obscure and controversial. By using combined infrared spectroscopy, electron microscopy and solid‐state nuclear magnetic resonance measurements we identify the octahedral, amphoteric (O) 5 Al(VI)‐OH sites on the (100) segments of massively restructured (110) facets on typical rhombus‐platelet γ‐alumina as well as the (100) segments of irrational surfaces (invariably always present in all γ‐alumina samples) responsible for its unique catalytic activity. Such (O) 5 Al(VI)‐OH sites are also present on the macroscopically defined (100) facets of γ‐alumina with elongated/rod‐like geometry. The mechanism by which these sites lose ‐OH groups upon thermal dehydroxylation resulting in coordinatively unsaturated penta‐coordinate Al +3 O 5 sites is clarified. These coordinatively unsaturated penta‐coordinate Al sites produce well‐defined thermally stable Al‐carbonyl complexes. Our findings contribute to the understanding of the nature of coordinatively unsaturated Al sites on the surface of γ‐alumina and their role as catalytically active sites.

Khivantsev, Konstantin↗
DOE OSTI2025

Stepwise impregnation of bimetallic catalysts for carbon nanotube synthesis

Supported bimetallic catalysts are widely used for carbon nanotube (CNT) synthesis, yet the effects of impregnation procedure remain underexplored. Here, we investigated how the sequence of metal impregnation affects CNT synthesis. We prepared cobalt-molybdenum (Co-Mo) bimetallic catalysts on alumina supports via co- and stepwise impregnation, then compared their CNT synthesis performance under identical conditions. Stepwise-impregnated catalysts exhibited higher carbon yields than those prepared by co-impregnation. Notably, impregnating Mo after Co achieved the highest yield despite the lowest BET surface area. Synchrotron X-ray diffraction and visible/UV-Raman spectroscopy revealed that only this catalyst contained Al 2 (MoO 4 ) 3 with a MoO 4 structure. X-ray photoelectron spectroscopy clarified the surface chemistry: the catalyst with the highest CNT productivity exposed Mo entirely as Mo 6+ in Al 2 (MoO 4 ) 3 and CoMoO 4 , whereas the others contained both Mo 4+ and Mo 6+ . The MoO x species like Al 2 (MoO 4 ) 3 is known to suppress Co sintering during CNT synthesis, delaying catalyst deactivation and enhancing the carbon yield. Moreover, an inverse relationship was observed between carbon yield and the CoMoO 4 content. This is attributed to the consumption of catalytically active Co during CoMoO 4 formation, which reduces active sites for CNT growth. ICP-OES further confirmed higher Co and Mo loadings for stepwise catalysts, contributing to superior catalyst performance. The extent of CoMoO 4 formation strongly depended on the metal introduction sequence. In conclusion, this trend is illustrated by considering the relationship between the point of zero charge of support and the pH of the metal precursor solutions.

36 MATERIALS SCIENCE↗
DOE OSTI2026

LandCast Mosaic: Reconstructing Global Population Distributions, 1975-2025

LandCast Mosaic (LCM) provides a global, high-resolution gridded population dataset spanning 1975–2025, representing annual, scenario-consistent estimates of daytime, nighttime, and ambient population distributions. LCM builds on the 2025 LandScan Mosaic (LSM) population data by backcasting to earlier years using historical changes in built-surface area derived from the Global Human Settlement Layer (GHSL) and authoritative population counts from international datasets. The workflow scales 2025 building-informed gridded population estimates according to observed changes in built surface, applies linear interpolation for intermediate years, and normalizes estimates to match administrative- and country-level totals. The resulting dataset offers consistent, globally gridded population estimates over fifty years, suitable for temporal analyses of population dynamics, disaster risk modeling, and urban planning applications.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2021

Precise Identification and Characterization of Catalytically Active Sites on the Surface of γ-Alumina

γ-alumina is one of the oldest and most important commercial catalytic materials with high surface area and stability. These attributes enabled its use as the first commercial large-scale heterogeneous catalyst for ethanol dehydration. Despite progress in materials characterization the nature of the specific sites on the surface of γ-alumina that are responsible for its unique catalytic properties has remained obscure and controversial. By using combined infrared spectroscopy, electron microscopy and solid-state nuclear magnetic resonance measurements we identify the octahedral, amphoteric (O) 5 Al(VI)-OH sites on the (100) segments of massively restructured (110) facets on typical rhombus-platelet γ-alumina as well as the (100) segments of irrational surfaces (invariably always present in all γ-alumina samples) responsible for its unique catalytic activity. Such (O) 5 Al(VI)-OH sites are also present on the macroscopically defined (100) facets of γ-alumina with elongated/rod-like geometry. The mechanism by which these sites lose -OH groups upon thermal dehydroxylation resulting in coordinatively unsaturated penta-coordinate Al +3 O 5 sites is clarified. These coordinatively unsaturated penta-coordinate Al sites produce well-defined thermally stable Al-carbonyl complexes. Overall, our findings contribute to the understanding of the nature of coordinatively unsaturated Al sites on the surface of γ-alumina and their role as catalytically active sites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Microfluidic liquid sheets as large-area targets for high repetition XFELs

The high intensity of X-ray free electron lasers (XFELs) can damage solution-phase samples on every scale, ranging from the molecular or electronic structure of a sample to the macroscopic structure of a liquid microjet. By using a large surface area liquid sheet microjet as a sample target instead of a standard cylindrical microjet, the incident X-ray spot size can be increased such that the incident intensity falls below the damage threshold. This capability is becoming particularly important for high repetition rate XFELs, where destroying a target with each pulse would require prohibitively large volumes of sample. We present here a study of microfluidic liquid sheet dimensions as a function of liquid flow rate. Sheet lengths, widths and thickness gradients are shown for three styles of nozzles fabricated from isotropically etched glass. In-vacuum operation and sample recirculation using these nozzles is demonstrated. The effects of intense XFEL pulses on the structure of a liquid sheet are also briefly examined.

47 OTHER INSTRUMENTATION↗
DOE OSTI2022

Identifying Regimes During Plasma Catalytic Ammonia Synthesis

Herein, we demonstrate that the performance of mesoporous silica SBA-15 and SBA-15-Ag during plasma ammonia synthesis depends on the plasma conditions. At high power, the mesoporous silica SBA-15 without Ag produces the largest amount of ammonia, but the addition of Ag provides a minor benefit at lower powers. Plasma conditions were analyzed through optical emission spectroscopy using N 2 , N 2 + , and NH molecular bands and H α line. Stark broadening of H α line was used to find electron density, and N 2 molecular bands were used to assess N 2 vibrational excitation, important for plasma nitrogen decomposition. At similar input conditions, reactors with SBA-15 have higher electron density and higher N 2 vibrational temperature. Consistent with higher electron density, SBA-15 reactors have stronger N 2 + emission intensity relative to the neutral N 2 . The addition of Ag results in higher N 2 rotational temperature, possibly due to localized heating. From the materials point of view, SBA-15 is a more robust catalyst with good surface area retention after plasma exposure due to the lack of local heating generated when a metal is in the structure. Furthermore, we identify two possible regimes during ammonia synthesis, a metal and a surface-plasma driven. At lower plasma densities, the addition of metal is beneficial, while at higher power and plasma density, the best performance is achieved without the aid of a metal catalyst.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗