Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “structured adsorbents”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Co-precipitation induces changes to iron and carbon chemistry and spatial distribution at the nanometer scale

Association of organic matter (OM) with mineral phases via co-precipitation is expected to be a widespread process in environments with high OM input and frequent mineral dissolution and re-precipitation. In contrast to surface area-limited adsorption processes, co-precipitation may allow for greater carbon (C) accumulation. However, the potential sub-micrometer scale structural and compositional differences that affect the bioavailability of co-precipitated C are largely unknown. In this work, we used a combination of high-resolution analytical electron microscopy and bulk spectroscopy to probe interactions between a mineral phase (ferrihydrite, nominally Fe 2 O 3 •0.5H 2 O) and organic soil-derived water-extractable OM (WEOM). In co-precipitated WEOM-Fe, nanometer-scale scanning transmission electron microscopy with electron energy loss spectroscopy (STEM-EELS) revealed increased Fe(II) and less Fe aggregation relative to adsorbed WEOM-Fe. Spatially distinct lower- and higher-energy C regions were detected in both adsorbed and co-precipitated WEOM-Fe. In co-precipitates, lower-energy aromatic and/or substituted aromatic C was spatially associated with reduced Fe(II), but higher-energy oxidized C was enriched at the oxidized Fe(III) interface. Therefore, we show that co-precipitation does not constitute a non-specific physical encapsulation of C that only affects Fe chemistry and spatial distribution, but may cause a bi-directional set of reactions that lead to spatial separation and transformation of both Fe and C forms. In particular, we propose that abiotic redox reactions between Fe and C via substituted aromatic groups (e.g., hydroquinones) play a role in creating distinct co-precipitate composition, with potential implications for its mineralization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Effect of PCEs with different structures on hydration and properties of cementitious materials with low water-to-binder ratio

Polycarboxylate ethers (PCEs) with different structures and densities of anchor groups in the backbone were synthesized and characterized. The surface tension of their solutions, their adsorption on cementitious particles and zeta potential of cement-silica fume pastes with PCEs were measured. Their effects on hydration and properties of cement-silica fume paste with low water-to-binder ratio were examined. Results indicated that the adsorption kinetics of theses PCEs on cementitious particles are fitted the pseudo-second-order model. The introduction of long silane chain on PCE decreased its electrostatic adsorption, while PCE was adsorbed onto the surface of particles via both chemical and electrostatic adsorption, when silicon hydroxyl is directly connected to its backbone. In the presence of PCE with higher adsorbed amount, pastes exhibited lower yield stress and higher flowability, and higher strength at 7 d and 28 d. The low plastic viscosity, autogenous and drying shrinkage were related to the low surface tension of PCE solution.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Dislocation-Activated Low Platinum-Loaded PtCu Nanoparticles Welded onto the Substrate for Practical Acidic Hydrogen Generation

Although transition metal (M) alloying with platinum (Pt) is a promising approach to reduce the Pt dosage required in the hydrogen evolution reaction (HER), the catalytic activity and durability of PtM alloy are often unsatisfactory for acidic HER, especially at high currents, due to a reduced number of highly active sites (Pt) at the atomic level and challenges in stabilizing them to prevent detachment and aggregation. Herein, we report a robust functional structure integrated electrode (D-PtCu/CF) with abundant edge dislocations and very low platinum content (0.1 mg cm -2 ) to achieve high activity and stability in acidic HER within a proton exchange membrane water electrolysis cell (PEMWE). D-PtCu/CF exhibits high Pt mass activity (10.28 A mg Pt -1 ) and excellent operational stability (negligible decay after 200 h). X-ray absorption spectroscopy and in situ electrochemical experiments reveal that the lattice distortion caused by edge dislocations in PtCu mainly affects Pt atoms by compressing strain, reducing their ability to adsorb H. At the same time, Cu atoms are subjected to tensile strain, enhancing the bonding between Cu and H. Therefore, edge dislocations not only improve the intrinsic catalytic activity of Pt atoms but also increase the number of active sites (Cu) available for hydrogen adsorption, which synergistically accelerates the kinetics of the HER reaction. Finally, the PEMWE employing the D-PtCu/CF catalytic electrode can operate stably for 100 h at an industrial-level current density of 500 mA cm -2 with 1.63 V.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2020

MoS 2 -supported Au 31 for CO hydrogenation: A first-principle study

While the basal plane of single-layer molybdenum disulphide (MoS 2 ) is inert, attempts have been made to functionalize it chemically through the creation of defects and/or addition of dopants. With nanoparticles as dopants, the authors present density functional theory-based calculations of the hydrogenation of CO on a 31-atom, bilayer Au cluster supported on single-layer MoS 2 (Au31/MoS 2 ). Not surprisingly, the adsorption and reaction of all species involved in the hydrogenation occur at the edges of the cluster—the regions at which the interaction between MoS 2 and the Au cluster is tracked to be the strongest. The authors find two possible mechanisms that lead to the formation of methanol: (1) CO* → CHO* → CH 2 O* → CH 3 O* → CH 3 OH* and (2) CO* → CHO* → HCOH* → CH2OH* → CH3OH*, where * indicates the adsorbed species. Detailed analysis of the reaction pathways, however, does not result in favoring one mechanism over the other. Rather, both mechanisms are facile. In addition, the rate-limiting step in each mechanism is found to be the formation of the formyl radical group (CO* + H* → CHO*).

2D materials↗
DOE OSTI2022

Convenient Confinement: Interplay of Solution Conditions and Graphene Oxide Film Structure on Rare Earth Separations

Graphene oxide (GO) membranes are excellent candidates for a range of separation applications, including rare earth segregation and radionuclide decontamination. Understanding nanoscale water and ion behavior near interfacial GO is critical for groundbreaking membrane advances, including improved selectivity and permeability. Here, we experimentally examine the impact of solution conditions on water and lanthanide interactions with interfacial GO films and connect these results to GO membrane performance. The investigation of the confined films at the air–water interface with a combination of surface-specific spectroscopy and X-ray scattering techniques allows us to understand water and ion behaviors separately. Sum frequency generation spectroscopy reveals a dramatic change in interfacial water organization because of graphene oxide film deprotonation. Interfacial X-ray fluorescence measurements show a 17× increase in adsorbed lanthanide to the GO film from subphase pH 3 to pH 9. Liquid surface X-ray reflectivity data show an additional 2.7 $e^–$ per Å 2 for GO films at pH 9 versus pH 3 as well. These results are connected to GO membrane performance, which show increased selectivity and decreased flux for membranes filtering pH 9 solutions. We posit insoluble lanthanide hydroxides form at higher pHs. Taken together, these results highlight the importance of interfacial experiments on model GO systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

How Precisely Can Individual Molecules Be Analyzed? A Case Study on Locally Quantifying Forces and Energies Using Scanning Probe Microscopy

Recent advances in scanning probe microscopy methodology have enabled the measurement of tip-sample interactions with picometer accuracy in all three spatial dimensions, thereby providing a detailed site-specific and distance-dependent picture of the related properties. This paper explores the degree of detail and accuracy that can be achieved in locally quantifying probe-molecule interaction forces and energies for adsorbed molecules. Toward this end, cobalt phthalocyanine (CoPc), a promising CO 2 reduction catalyst, was studied on Ag(111) as a model system using low-temperature, ultrahigh vacuum noncontact atomic force microscopy. Data were recorded as a function of distance from the surface, from which detailed three-dimensional maps of the molecule's interaction with the tip for normal and lateral forces as well as the tip-molecule interaction potential were constructed. The data were collected with a CO molecule at the tip apex, which enabled a detailed visualization of the atomic structure. Determination of the tip-substrate interaction as a function of distance allowed isolation of the molecule-tip interactions; when analyzing these in terms of a Lennard-Jones-type potential, the atomically resolved equilibrium interaction energies between the CO tethered to the tip and the CoPc molecule could be recovered. Interaction energies peaked at less than 160 meV, indicating a physisorption interaction. As expected, the interaction was weakest at the aromatic hydrogens around the periphery of the molecule and strongest surrounding the metal center. In conclusion, the interaction, however, did not peak directly above the Co atom but rather in pockets surrounding it.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Antimony stable isotope fractionation during adsorption onto birnessite: A molecular perspective from X-ray absorption spectroscopy and density functional theory

Sorption of antimony (Sb) onto birnessite significantly influences the fate of Sb in oceanic and terrestrial environments and fractionates Sb isotopes. Nevertheless, little is known about Sb isotopic fractionation during its adsorption on birnessite. Here, in this study, we show the value of Δ 123 Sb adsorbed-aqueous increases from −0.398 to −0.332 ‰ in 1 h and then decreases and stabilizes at −0.384 ‰ in 72 h. The enrichment of the light Sb isotope is predominantly due to the distortion of the octahedral symmetry. X-ray absorption spectroscopy results indicate Sb first forms a double-corner-sharing complex on birnessite and then transforms to a double-edge-sharing complex during adsorption. The optimized bond distances for double-corner-sharing (3.37 Å) and double-edge-sharing (2.90 Å) complexes calculated using density functional theory (DFT) fits well with the structure (3.41 and 3.00 Å) revealed by X-ray absorption spectroscopy, respectively. The fractionation derived from reduced partition function ratios calculated using DFT aligns well with the experimental results. Therefore, the variation in Sb isotopic fractionation during adsorption is attributed to the evolving structure of Sb complexes on birnessite. Our results demonstrate the isotopic fractionation of Sb during adsorption on birnessite and provide a molecular-scale understanding of Sb behavior, contributing to the correct reconstruction of the Sb isotope composition of ancient seawater using ferromanganese crusts and nodules, and efforts to trace Sb migration in epigenetic mining environments.

Adsorption↗
DOE OSTI2019

Interaction of Methane with Calcium Ferrite in the Chemical Looping Partial Oxidation Application: Experimental and DFT Study

In this study, experimental studies using mass spectroscopy, thermogravimetric analysis, in situ X-ray diffraction (XRD), and theoretical density functional theory calculations were carried out to investigate the mechanism of methane partial oxidation over a CaFe 2 O 4 oxygen carrier. The XRD analysis revealed the formation of the calcium ferrite phases during methane reduction occurred in the sequence CaFe 2 O 4 →CaFe 3 O 5 + Ca 2 Fe 2 O 5 →FeO + Fe + CaO→Fe + CaO. Each of these phases was modeled using periodic density functional theory to study the activity of these phases for the reactivity with CH 4 , CO, and H 2 along with the adsorbed surface species to help elucidate the effect that phase changes during reduction have on the chemical looping products CO and H 2 . Mass spectroscopic analysis revealed the formation of H 2 O and CO 2 occurred prior to the formation of CO and H 2 , and these products may be due to the removal of lattice oxygen bound in the discrete primary phase, which contributes to a small portion (~16%) of the total transferable oxygen in the solid. The density functional theory (DFT) results suggest that the gaseous CO and H 2 are not thermodynamically favorable to react with the Ca 2 Fe 2 O 5 where the release of CO and H 2 led to an increase in selectivity for these products. The DFT results suggest that some of the adsorbed atomic hydrogen combined to form adsorbed H 2 and then gaseous H 2 on the CaFe 2 O 4 surface, while the carbon deposition and some adsorbed atomic hydrogen react to form the CaFe 3 O 5 and Ca 2 Fe 2 O 5 phases simultaneously. DFT simulations suggest that both the gaseous H 2 and adsorbed atomic H are less thermodynamically favorable to drive the deep reduction of Ca 2 Fe 2 O 5 to CaO and Fe0. The deep reduction of the calcium ferrite therefore favors the generation of syngas products (CO and H 2 ) through mechanisms of methane dehydrogenation and selective oxidation of carbon to CO. The significant difference in mechanisms for partial oxidation of methane to syngas with the CaFe 2 O 4 carrier can be correlated to the differences in the oxide phases present during the reduction process, concentration of oxygen species, and bonding in the lattice structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Nitride or Oxynitride? Elucidating the Composition–Activity Relationships in Molybdenum Nitride Electrocatalysts for the Oxygen Reduction Reaction

Molybdenum nitride (Mo–N) catalysts have shown promising activity and stability for the oxygen reduction reaction (ORR) in acid. However, the effect of oxygen (O) incorporation (from synthesis, catalysis, or exposure to air) on their activity remains elusive. Here, we use reactive sputtering to synthesize three compositions of thin-film catalysts and use extensive materials characterization to investigate the depth-dependent structure and incorporated O. We show that the as-deposited Mo–N films are highly oxidized both at the surface (>30% O) and in the bulk (3–21% O) and that the ORR performance is strongly correlated with the bulk structure and composition. Activity for 4e– ORR is highest for compositions with the highest N/O and N/Mo ratio. Furthermore, H 2 O 2 production for the films with moderate O content is comparable to or higher than the most H 2 O 2 -selective nonprecious metal catalysts in acidic electrolyte, on a moles per mass or surface area of catalyst basis. Density functional theory provides insight into the energetics of O incorporation and vacancy formation, and we hypothesize that activity trends with O/N ratios can be traced to the varying crystallite phases and their interactions with ORR adsorbates. This work demonstrates the prevalence and significance of O in metal nitride electrocatalysts and motivates further investigation into the role of O in other nonprecious metal materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Changing chemistry of particulate manganese in the near- and far-field hydrothermal plumes from 15°S East Pacific Rise and its influence on metal scavenging

Dissolved Mn(II) in the hydrothermal plume is known to be microbially oxidized to form Mn(III/IV) oxides, and the Mn oxides scavenge other trace elements in seawater. In the GEOTRACES GP16 cruise, dissolved Mn (dMn) and particulate Mn (pMn) were found to be transported over 4000 km westwards from the Southern Eastern Pacific Rise. Previous studies in this plume showed different removal rates of dMn and pMn as well as pMn size distribution between the near-field (<80 km from the ridge axis) and far-field (>80 km) plumes. In order to understand Mn cycling in these plumes, spatial distribution, oxidation states, and mineral structures of Mn in small size fraction (SSF; 0.8–51 μm) and large size fraction (LSF; >51 μm) particles from the near-field and far-field plumes were examined using micro X-ray fluorescence spectrometry (μ-XRF), X-ray absorption near-edge structure spectroscopy (XANES), chemical species mapping, and extended X-ray absorption fine-structure spectroscopy (EXAFS). In the near-field plume, pMn in the SSF is dominated by oxidized Mn with Mn(III) fractions of ~30%. They are a mixture of δ-MnO 2 and triclinic birnessites that is known to be formed as a result of autocatalytic Mn(II) oxidation at the surface of freshly-formed δ-MnO2, suggesting that both microbial and autocatalytic Mn oxidation occur in the near-field plume. The LSF pMn in the near-field plume is also oxidized and often found in large aggregates several hundreds of μm in size. These aggregates settle out in the near-field and during transport, and are not found in the far-field plume. In the far-field plume where Mn oxides are not newly formed, pMn in the SSF is oxidized, but their Mn(III) fractions are smaller than in the near-field pMn. Unlike the SSF, the far-field plume LSF pMn is dominated by reduced Mn, implying very slow aggregation of pMn in the far-field plume. The different characteristics of pMn between the near-field and far-field plumes affect its scavenging of other trace elements. In the near-field plume, Co, Mo, 231 Pa are associated with pMn, but not in the far-field plume. 231 Pa is adsorbed to pFe rather than pMn in the far-field plume, and Pb is adsorbed to pFe in the entire plume. The result shows that freshly-formed Mn oxides in the near-field plume have higher scavenging capacity than the far-field plume pMn. Our findings suggest that the mineralogical age of Mn oxides may be an important parameter that controls the scavenging of many other trace elements and isotopes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Efficient Mn 2+ Doping in Non-Stoichiometric Cesium Lead Bromide Perovskite Quantum Dots

Doping magnetic transition metal ions (e.g., Mn 2+ ) into colloidal quantum dots endows novel optical and magnetic properties to the host materials. CsPbBr 3 quantum dots (QDs) are emerging light-emitting materials with high structural and chemical flexibility in the visible spectral regime. However, efficiently doping Mn 2+ ions in CsPbBr 3 QDs remains challenging, especially when size confinement and ensemble uniformity are needed for understanding the underexplored exciton-dopant exchange interaction. Here, we introduce a doping mechanism based on electrostatic surface Mn 2+ adsorption that enables efficient Mn 2+ incorporation in strongly confined CsPbBr 3 QDs. The resultant QDs are found to have a Cs-deficient stoichiometry compared to their undoped counterparts. A redox reaction-based purification method was developed to remove Mn 2+ cations that are tightly adsorbed on the surface to determine the concentration of lattice-incorporated Mn 2+ . Our synthesis enables a Mn 2+ doping/alloying concentration of up to ∼44% with a Mn 2+ photoluminescence efficiency exceeding 90%. This allows for the determination of the intrinsic exciton-to-dopant energy transfer rate.

Hidayatova, Lamia [Univ. of Oklahoma, Norman, OK (↗
DOE OSTI2020

Enhanced Arsenic (III and V) Removal in Anoxic Environments by Hierarchically Structured Citrate/FeCO 3 Nanocomposites

Novel citrate/FeCO 3 nanocomposites (CF-NCs) were synthesized for effective arsenic (III and V) sorption with constant addition of Fe2+ into HCO 3 - solution in the presence of citrate. This paper is the first report on the formation of CF-NCs, and in this study we investigate the mechanisms of arsenic uptake by the sorbent under anoxic conditions through various solid- and liquid-phase spectroscopic methods, including X-ray absorption spectroscopy. In CF-NCs, citrate was found to be incorporated into the structure of siderite (up to 17.94%) through (Fe 2+ citrate) - complexes. The crystal morphology of rhombohedral siderite was changed into hierarchically nanostructured spherical aggregates composed of several sheet-like crystals, which improved the surface reactivity in the presence of sufficient citrate. Compared to pure siderite (15.2%), enhanced removal of As(III) in the range of 19.3% to 88.2% was observed, depending on the amount of incorporated citrate. The maximum sorption capacities of CF-NCs for As(III) and As(V) were 188.97 and 290.22 mg/g, respectively, which are much higher than those of previously reported siderite-based adsorbents. It was found that arsenic (III and V) sorption on CF-NCs occurred via bidentate corner-sharing surface complexation, predominantly without changes in the arsenic oxidation states. These results suggest that arsenic (III and V) can be attenuated by siderite in anoxic environments, and this attenuation can be even more effective when siderite is modified by incorporation of organic compounds such as citrate.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Highly selective hydrogenation of phenol to cyclohexanone over a Pd-loaded N-doped carbon catalyst derived from chitosan

A highly stable Pd-loaded N-doped carbon catalyst (ACN pd ) for phenol hydrogenation was prepared from chitosan by hydrothermal carbonization. ACN pd does not require a reduction step before catalytic use due to the Pd in the as-prepared catalyst mainly exists in the form of Pd 0 (80%). The carbon support involves N-containing groups such as pyridinic nitrogen and pyrrolic nitrogen, which could provide basic sites to adsorb phenol effectively. The as-fabricated ACN pd shows high catalytic performance with turnover frequency (TOF) of 29.34 h -1 . Accordingly, a phenol conversion of 100% and a cyclohexanone selectivity of 99.1% are achieved in 5 h at 100 °C and 1 MPa H 2 . This outstanding performance is attributed to the synergetic effects of the Pd particles, the N-functional groups, and the Lewis acid sites on the support. The carbon support presents intrinsic Lewis acid sites due to its electrophilicity, and Pd doping further increases the strength of such acid sites as it causes electron-deficient structural features. Moreover, the Lewis acid sites inhibit the over-hydrogenation from cyclohexanone to cyclohexanol. This study provides new insights into the application of functional biomass-based carbon materials as catalyst supports.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Structure-Activity Relationships of Hydrothermally Aged Titania-Supported Vanadium-Tungsten Oxide Catalysts for SCR of NOx Emissions with NH3

Supported V2O5-WO3/TiO2 materials employed as selective catalytic reduction (SCR) catalysts for NOx emission control from power plants. Fresh SCR catalysts usually receive exposure to harsh treatments in industry to accelerate catalyst activation (calcination in air at 650oC) and catalyst aging (hydrothermal aging at 650oC) in a way that represents various points in the catalyst/product lifetime. The present study investigates the catalyst structural and chemical changes occurring during such harsh treatments. Three series of supported V2O5-WO3/TiO2 catalysts were prepared by incipient-wetness impregnation of aqueous ammonium metavanadate and metatungstate precursors. The catalysts were subsequently dried and calcined at 550oC in O2, 650oC in O2, and hydrothermal conditions (10% O2, 8% H2O, 7% CO2 and 75% N2) at 650oC. The resulting catalysts were physically characterized by numerous techniques (in situ Raman, in situ IR, in situ High Field-High Spinning solid-state 51V MAS NMR, in situ EPR, XRD, BET surface area and ICP) and chemically probed with adsorbed ammonia, SCR-TPSR, and the SCR reaction. The surface WOx sites on the TiO2 support behave as a textural promoter that stabilizes the TiO2 (anatase) phase from sintering and transforming to the undesirable crystalline TiO2 (rutile) phase that can lead to formation of a Ti1-xVxO2 (rutile) solid solution with reduced V4+ cations (~7-15%). The surface VOx sites are mostly oligomerized as surface V+5Ox sites (~50-85% oligomers) and the extent of oligomerization tends to increase with surface WOx coverage and calcination temperature. A major difference between the calcined and hydrothermally treated catalysts was the low concentration of surface NH3* species on Lewis acid sites for the hydrothermally treated catalysts, yet the SCR activity was almost comparable for both catalysts. This finding suggests that surface NH4+*, primarily associated with the surface VOx sites, are able to efficiently perform the SCR reaction. Given that multiple catalyst parameters were simultaneously varying during these treatments, it was difficult to correlate the SCR activity with any single catalyst parameter. A correlation, however, was found between the SCR TOF/activity and the sum of the surface NH3* and NH4+* species, which is dominated by the surface NH4+* species.

SCR, NO, NH3, catalyst, V2O5, WO3, TiO2, promotion↗
DOE OSTI2020

Activation and surface reactions of CO and H 2 on ZnO powders and nanoplates under CO hydrogenation reaction conditions

Here, activation and surface reactions of CO and H 2 on ZnO powders and nanoplates under CO hydrogenation reaction conditions were (quasi) in situ studied using temperature programmed surface reaction spectra, diffuse reflectance Fourier transform infrared spectroscopy, inelastic neutron scattering spectroscopy and electron paramagnetic resonance. CO undergoes disproportion reaction to produce gaseous CO 2 and surface carbon adatoms, and adsorbs to form surface formate species. H 2 adsorption forms dominant irreversibly-adsorbed surface hydroxyl groups and interstitial H species and very minor surface Zn-H species. Surface formate species and hydroxyl groups react to produce CO 2 and H 2 , while surface carbon adatoms are hydrogenated by surface Zn-H species sequentially to produce CH(a), CH 2 (a), CH 3 (a) and eventually gaseous CH 4 . The ZnO nanoplates, exposing a higher fraction of Zn-ZnO(0001) and O-ZnO(000–1) polar facets, are more active than the ZnO powders to catalyze CO hydrogenation to CH 4 . These results provide fundamental understanding of the reaction mechanisms and structural effects of CO hydrogenation reaction catalyzed by ZnO-based catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Yttrium-based Double Perovskite Nanorods for Electrocatalysis

In this work, we investigate the effect of chemical composition of double perovskite nanorods on their versatile electrocatalytic activity not only as supports for the oxidation of small organic molecules but also as catalysts for the oxygen evolution reaction. Specifically, Y 2 CoMnO 6 and Y 2 NiMnO 6 nanorods with average diameters of 300 nm were prepared by a two-step hydrothermal method, in which the individual effects of synthetic parameters, such as the pH, annealing temperature, and precursor ratios on both the composition and morphology, were systematically investigated. When used as supports for Pt nanoparticles, Y 2 CoMnO 6 /Pt catalysts exhibited an electrocatalytic activity for the methanol oxidation reaction, which is 2.1 and 1.3 times higher than that measured for commercial Pt/C and Y 2 NiMnO 6 /Pt. Similarly, the Co-based catalyst support material displayed an ethanol oxidation activity, which is 2.3 times higher than both Pt/C and Y 2 NiMnO 6 /Pt. This clear enhancement in the activity for Y 2 CoMnO 6 can largely be attributed to strong metal-support interactions, as evidenced by a downshift in the binding energy of the Pt 4f bands, measured by XPS, which is often correlated not only with a downshift in the d-band center but also to a decreased adsorption of poisoning adsorbates. Moreover, when used as catalysts for the oxygen evolution reaction, Y 2 CoMnO 6 displayed a much greater activity as compared with Y 2 NiMnO 6 . This behavior can largely be attributed not only to a preponderance of comparatively more favorable oxidation states and electronic configurations but also to the formation of an active layer on the surface of the Y 2 CoMnO 6 catalyst, which collectively give rise to improved performance metrics and greater stability as compared with both IrO 2 and Y 2 NiMnO 6 . Overall, these results highlight the importance of both the chemical composition and the electronic structure of double perovskites, especially when utilized in multi-functional roles as either supports or catalysts.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2025

Single-Phase Spinel NiCo 2 O 4 as Highly Active and Stable Electrocatalysts for Urea Oxidation Reaction in Urea Electrolysis

Exploring and designing a stable and active catalyst for the urea electro-oxidation reaction (UOR, CO(NH 2 ) 2 + 6OH – → CO 2 + N 2 + 5H 2 O + 6e – ) is crucial for the long-term sustainability of ecological systems and clean energy production. We found that spinel NiCo 2 O 4 is a stable and active electrocatalyst for UOR at a relatively low anodic potential without triggering the competing oxygen evolution reaction (OER). A urea electrolysis cell (CO(NH 2 )2 + H 2 O → CO 2 + N 2 + 2H 2 ) utilizing a spinel NiCo 2 O 4 anode and a commercial Pt cathode was further characterized through galvanostatic polarization tests, demonstrating excellent structural stability at various current densities. Post-mortem analysis of long-term urea electrolysis measurements suggested that NiCo 2 O 4 electrocatalysts maintained a stable spinel structure. However, redistribution of Ni 3+ to Ni 2+ valence on the catalyst surface was observed, in contrast to the intact Co valence, indicating that (i) Ni sites are active toward urea adsorption and sequential electro-oxidation; (ii) while urea oxidation proceeds primarily through the direct electro-oxidation mechanism, chemical reactions between the Ni 3+ site and urea occur during long-term electrochemical UOR operation. Density functional theory (DFT) simulations were used to calculate the adsorption energies of urea molecules on NiO, Co 3 O 4 , and NiCo 2 O 4 , revealing the importance of regulating the configuration of adsorbed urea molecules on the NiCo 2 O 4 surface.

36 MATERIALS SCIENCE↗