Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “standardized data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27
All sourcesNASA NTRSDOE OSTI
NASA NTRS2010

C-Band Airport Surface Communications System Standards Development, Phase I

This document is being provided as part of ITT's NASA Glenn Research Center Aerospace Communication Systems Technical Support (ACSTS) contract NNC05CA85C, Task 7: "New ATM Requirements--Future Communications, C-Band and L-Band Communications Standard Development." The proposed future C-band (5091- to 5150-MHz) airport surface communication system, referred to as the Aeronautical Mobile Airport Communications System (AeroMACS), is anticipated to increase overall air-to-ground data communications systems capacity by using a new spectrum (i.e., not very high frequency (VHF)). Although some critical services could be supported, AeroMACS will also target noncritical services, such as weather advisory and aeronautical information services as part of an airborne System Wide Information Management (SWIM) program. AeroMACS is to be designed and implemented in a manner that will not disrupt other services operating in the C-band. This report defines the AeroMACS concepts of use, high-level system requirements, and architecture; the performance of supporting system analyses; the development of AeroMACS test and demonstration plans; and the establishment of an operational AeroMACS capability in support of C-band aeronautical data communications standards to be advanced in both international (International Civil Aviation Organization, ICAO) and national (RTCA) forums. This includes the development of system parameter profile recommendations for AeroMACS based on existing Institute of Electrical and Electronics Engineering (IEEE) 802.16e- 2009 standards

Hall, Edward↗
NASA NTRSDate not supplied

Blast from the Past: ASDC Curation for NASA Suborbital Legacy Missions to Promote Data Discovery and Accessibility

NASA has an extensive history of conducting suborbital field campaigns to further advances in atmospheric sciences. Beginning with the Chemical Instrument Test and Evaluation (CITE) conducted in 1983-1984, NASA has completed many suborbital campaigns over the past three decades. Since the early 2010s, suborbital missions are typically assigned to a NASA Distributed Active Archive Center (DAAC) prior to the mission for long-term archival and distribution. Efforts are being made by NASA’s Earth Science Data and Information System (ESDIS) Project and the Airborne Data Management Group (ADMG) to assign legacy missions to DAACs for permanent archival and distribution, so that these valuable datasets remain to be available to the scientific community. NASA’s Atmospheric Science Data Center (ASDC) has been named the assigned DAAC for nearly 20 atmospheric composition legacy missions, including missions conducted as part of the Global Tropospheric Experiment (GTE) and expects to be named the assigned DAAC for more of these missions over the next few years. The primary goal of the ASDC is to provide access to the datasets as they are currently formatted to the broad user community and enhance their findability and accessibility. However, data reporting standards have evolved significantly since 1983 and the datasets span a wide variety of file formats, including text, Ames, GTE, and ICARTT (International Consortium for Atmospheric Research on Transport and Transformation), and the amount of metadata and relevant information included in the files also varies greatly and can not be readily extracted without subject matter knowledge. This has caused challenges for the ASDC’s suborbital metadata extraction pipeline in ensuring that accurate and necessary metadata is being provided for the missions by all the ASDC’s existing search mechanisms. To make the data more findable and accessible, the ASDC has begun researching ways to further enhance the datasets, including distributing value-added products (i.e. consistent file format such as ICARTT or netCDF), adding standard names from the ESDIS Standards Coordination Office (ESCO)-approved Atmospheric Composition Variable Standard Names Convention (ACVSNC), and creating outreach materials such as ArcGIS StoryMaps, User Guides, and Micro Articles, providing overviews of the missions and what type of data was collected during the missions. These efforts also help support NASA’s Open-Source Science by enhancing the FAIRness of the legacy data products. This presentation will review the ASDC’s ongoing efforts, progress made, and future plans for legacy missions.

Megan Buzanowicz↗
NASA NTRS1965

Transport and mixing in atmosphere

Standard meteorological data to compute transports of momentum, sensible heat and moisture in atmosphere - transport and mixing in atmosphere

METEOROLOGY↗
NASA NTRS1981

Total ozone trend significance from space time variability of daily Dobson data

Estimates of standard errors of total ozone time and area means, as derived from ozone's natural temporal and spatial variability and autocorrelation in middle latitudes determined from daily Dobson data are presented. Assessing the significance of apparent total ozone trends is equivalent to assessing the standard error of the means. Standard errors of time averages depend on the temporal variability and correlation of the averaged parameter. Trend detectability is discussed, both for the present network and for satellite measurements.

Wilcox, R. W.↗
NASA NTRS2008

The User Community and a Multi-Mission Data Project: Services, Experiences and Directions of the Space Physics Data Facility

From a user's perspective, the multi-mission data and orbit services of NASA's Space Physics Data Facility (SPDF) project offer a unique range of important data and services highly complementary to other services presently available or now evolving in the international heliophysics data environment. The VSP (Virtual Space Physics Observatory) service is an active portal to a wide range of distributed data sources. CDAWeb (Coordinate Data Analysis Web) enables plots, listings and file downloads for current data cross the boundaries of missions and instrument types (and now including data from THEMIS and STEREO). SSCWeb, Helioweb and our 3D Animated Orbit Viewer (TIPSOD) provide position data and query logic for most missions currently important to heliophysics science. OMNIWeb with its new extension to 1- and 5-minute resolution provides interplanetary parameters at the Earth's bow shock as a unique value-added data product. SPDF also maintains NASA's CDF (common Data Format) standard and a range of associated tools including translation services. These capabilities are all now available through webservices-based APIs as well as through our direct user interfaces. In this paper, we will demonstrate the latest data and capabilities now supported in these multi-mission services, review the lessons we continue to learn in what science users need and value in this class of services, and discuss out current thinking to the future role and appropriate focus of the SPDF effort in the evolving and increasingly distributed heliophysics data environment.

Fung, Shing F.↗
NASA NTRS2018

A Concept for Civil Space Traffic Management

As technology has improved, operators have sought to use cubesats, as well as smallsats more generally, to perform increasingly more ambitious and sophisticated functions. Despite this, practical concerns associated with cubesat infant mortality, conjunctions, limited maneuverability, and debris generation have been relatively muted because most cubesats have been launched to lower orbits that limit both their orbital lifetime and consequences should a collision occur. NASA ARC has developed a concept for a highly-automated and distributed space traffic management (STM) architecture, drawing on similar work done to provide traffic management for small unmanned aerial systems (UAS) operating at low altitudes. The system proposes a strategy to accommodate growing space traffic volume safely, as well as pave the way for a transition of civil STM authority to a civilian governmental entity. The architecture envisions an open-access software platform architecture of data and service suppliers, consumers, and regulators, connected via a set of application programming interfaces (APIs). The platform would build on, rather than replicate existing integration and coordination efforts within the space situational awareness ecosystem, using existing standards for data message formats from organizations like the Consultative Committee for Space Data Systems and wrapping, rather than replacing existing integrations. We will present an initial STM architecture in this presentation, with a few examples showing how stakeholders can interact structurally, but flexibly, within this architecture.

Space Situational Awareness↗
NASA NTRS2004

Grid Enabled Geospatial Catalogue Web Service

Geospatial Catalogue Web Service is a vital service for sharing and interoperating volumes of distributed heterogeneous geospatial resources, such as data, services, applications, and their replicas over the web. Based on the Grid technology and the Open Geospatial Consortium (0GC) s Catalogue Service - Web Information Model, this paper proposes a new information model for Geospatial Catalogue Web Service, named as GCWS which can securely provides Grid-based publishing, managing and querying geospatial data and services, and the transparent access to the replica data and related services under the Grid environment. This information model integrates the information model of the Grid Replica Location Service (RLS)/Monitoring & Discovery Service (MDS) with the information model of OGC Catalogue Service (CSW), and refers to the geospatial data metadata standards from IS0 19115, FGDC and NASA EOS Core System and service metadata standards from IS0 191 19 to extend itself for expressing geospatial resources. Using GCWS, any valid geospatial user, who belongs to an authorized Virtual Organization (VO), can securely publish and manage geospatial resources, especially query on-demand data in the virtual community and get back it through the data-related services which provide functions such as subsetting, reformatting, reprojection etc. This work facilitates the geospatial resources sharing and interoperating under the Grid environment, and implements geospatial resources Grid enabled and Grid technologies geospatial enabled. It 2!so makes researcher to focus on science, 2nd not cn issues with computing ability, data locztic~, processir,g and management. GCWS also is a key component for workflow-based virtual geospatial data producing.

Chen, Ai-Jun↗
NASA NTRSDate not supplied

Toward High-Quality X-59 Sonic Thump Measurements

Brigham Young University has been investigating best practices for recommendation to NASA in upcoming X-59 sonic thump measurements. This preparatory work has focused both on obtaining high-fidelity data and standardizing signal analysis techniques for sonic thumps. Included in the research are topics such as whether to use a ground-based or elevated microphone, how to use low-noise microphones and still recover high-fidelity data at low frequencies, and estimating the uncertainty in a given measurement due to local atmospheric turbulence effects. Also included is a study of windowing techniques, zero padding, and the removal of high-frequency ambient noise contamination.

sonic boom↗
NASA NTRSDate not supplied

AI Curation Methods for NASA Scientific Data

The NASA Open Science Data Repository (OSDR) serves as a central hub for sharing and accessing NASA's vast collection of scientific data, supporting researchers across diverse fields. To enhance the efficiency, accuracy, and accessibility of this data, we are leveraging advanced artificial intelligence (AI) techniques as part of the AI for Curation project. By integrating large language models (LLMs) into our data curation workflow, we aim to streamline the entire process—from data submission to user interaction. This initiative focuses on improving key areas, including data ingestion, curation, and user engagement with curated datasets, impacting multiple domains and a wide user base. First, we are developing tools that can automatically parse data in various formats, using LLMs to convert unstructured data into structured, standardized formats. This reduces the manual effort required for curation, allowing curators to focus on more critical scientific analyses. Additionally, AI and machine learning (ML) models are being implemented to automate data validation and verification, ensuring the highest standards of data quality and reliability. Finally, we are creating a conversational AI agent to interact with the curated scientific studies in OSDR, helping users easily navigate the repository and access relevant data. By enhancing data discoverability and accessibility, these advancements will foster new research opportunities and promote the principles of open science.

Walter Alvarado↗
NASA NTRS2011

C-Band Airport Surface Communications System Standards Development. Phase II Final Report. Volume 1: Concepts of Use, Initial System Requirements, Architecture, and AeroMACS Design Considerations

This report is provided as part of ITT s NASA Glenn Research Center Aerospace Communication Systems Technical Support (ACSTS) contract NNC05CA85C, Task 7: New ATM Requirements-Future Communications, C-Band and L-Band Communications Standard Development and was based on direction provided by FAA project-level agreements for New ATM Requirements-Future Communications. Task 7 included two subtasks. Subtask 7-1 addressed C-band (5091- to 5150-MHz) airport surface data communications standards development, systems engineering, test bed and prototype development, and tests and demonstrations to establish operational capability for the Aeronautical Mobile Airport Communications System (AeroMACS). Subtask 7-2 focused on systems engineering and development support of the L-band digital aeronautical communications system (L-DACS). Subtask 7-1 consisted of two phases. Phase I included development of AeroMACS concepts of use, requirements, architecture, and initial high-level safety risk assessment. Phase II builds on Phase I results and is presented in two volumes. Volume I (this document) is devoted to concepts of use, system requirements, and architecture, including AeroMACS design considerations. Volume II describes an AeroMACS prototype evaluation and presents final AeroMACS recommendations. This report also describes airport categorization and channelization methodologies. The purposes of the airport categorization task were (1) to facilitate initial AeroMACS architecture designs and enable budgetary projections by creating a set of airport categories based on common airport characteristics and design objectives, and (2) to offer high-level guidance to potential AeroMACS technology and policy development sponsors and service providers. A channelization plan methodology was developed because a common global methodology is needed to assure seamless interoperability among diverse AeroMACS services potentially supplied by multiple service providers.

Hall, Edward↗
NASA NTRS2011

C-Band Airport Surface Communications System Standards Development. Phase II Final Report. Volume 2: Test Bed Performance Evaluation and Final AeroMACS Recommendations

This report is provided as part of ITT s NASA Glenn Research Center Aerospace Communication Systems Technical Support (ACSTS) contract NNC05CA85C, Task 7: New ATM Requirements-Future Communications, C-Band and L-Band Communications Standard Development and was based on direction provided by FAA project-level agreements for New ATM Requirements-Future Communications. Task 7 included two subtasks. Subtask 7-1 addressed C-band (5091- to 5150-MHz) airport surface data communications standards development, systems engineering, test bed and prototype development, and tests and demonstrations to establish operational capability for the Aeronautical Mobile Airport Communications System (AeroMACS). Subtask 7-2 focused on systems engineering and development support of the L-band digital aeronautical communications system (L-DACS). Subtask 7-1 consisted of two phases. Phase I included development of AeroMACS concepts of use, requirements, architecture, and initial high-level safety risk assessment. Phase II builds on Phase I results and is presented in two volumes. Volume I is devoted to concepts of use, system requirements, and architecture, including AeroMACS design considerations. Volume II (this document) describes an AeroMACS prototype evaluation and presents final AeroMACS recommendations. This report also describes airport categorization and channelization methodologies. The purposes of the airport categorization task were (1) to facilitate initial AeroMACS architecture designs and enable budgetary projections by creating a set of airport categories based on common airport characteristics and design objectives, and (2) to offer high-level guidance to potential AeroMACS technology and policy development sponsors and service providers. A channelization plan methodology was developed because a common global methodology is needed to assure seamless interoperability among diverse AeroMACS services potentially supplied by multiple service providers.

Hall, Edward↗
NASA NTRS1979

Timing and frequency considerations in the worldwide testing of a spread spectrum communication system

During 1978 and 1979, an Air Force C-135 test aircraft was flown to various locations in the North and South Atlantic and Pacific Oceans for satellite communications experiments. A part of the equipment tested on the aircraft was the SEACOM spread spectrum modem. The SEACOM modem operated at X band frequency from the aircraft via the DSCS II satellite to a ground station. For data to be phased successfully, it was necessary to maintain independent time and frequency accuracy over relatively long periods of time (up to two weeks) on the aircraft and at the ground station. To achieve this goal, two Efratom atomic frequency standards were used. The performance of these frequency standards as used in the spread spectrum modem is discussed, including the effects of high relative velocity, synchronization and the effects of the frequency standards on data performance is discussed. The aircraft environment, which includes extremes of temperature, as well as long periods of shutdown followed by rapid warmup requirements, is also discussed.

Woodring, D. G.↗
NASA NTRS2014

Software Suite to Support In-Flight Characterization of Remote Sensing Systems

A characterization software suite was developed to facilitate NASA's in-flight characterization of commercial remote sensing systems. Characterization of aerial and satellite systems requires knowledge of ground characteristics, or ground truth. This information is typically obtained with instruments taking measurements prior to or during a remote sensing system overpass. Acquired ground-truth data, which can consist of hundreds of measurements with different data formats, must be processed before it can be used in the characterization. Accurate in-flight characterization of remote sensing systems relies on multiple field data acquisitions that are efficiently processed, with minimal error. To address the need for timely, reproducible ground-truth data, a characterization software suite was developed to automate the data processing methods. The characterization software suite is engineering code, requiring some prior knowledge and expertise to run. The suite consists of component scripts for each of the three main in-flight characterization types: radiometric, geometric, and spatial. The component scripts for the radiometric characterization operate primarily by reading the raw data acquired by the field instruments, combining it with other applicable information, and then reducing it to a format that is appropriate for input into MODTRAN (MODerate resolution atmospheric TRANsmission), an Air Force Research Laboratory-developed radiative transport code used to predict at-sensor measurements. The geometric scripts operate by comparing identified target locations from the remote sensing image to known target locations, producing circular error statistics defined by the Federal Geographic Data Committee Standards. The spatial scripts analyze a target edge within the image, and produce estimates of Relative Edge Response and the value of the Modulation Transfer Function at the Nyquist frequency. The software suite enables rapid, efficient, automated processing of ground truth data, which has been used to provide reproducible characterizations on a number of commercial remote sensing systems. Overall, this characterization software suite improves the reliability of ground-truth data processing techniques that are required for remote sensing system in-flight characterizations.

Stanley, Thomas↗
NASA NTRS2002

EMI Standards for Wireless Voice and Data on Board Aircraft

The use of portable electronic devices (PEDs) on board aircraft continues to be an increasing source of misunderstanding between passengers and flight-crews, and consequently, an issue of controversy between wireless product manufacturers and air transport regulatory authorities. This conflict arises primarily because of the vastly different regulatory objectives between commercial product and airborne equipment standards for avoiding electromagnetic interference (EMI). This paper summarizes international regulatory limits and test processes for measuring spurious radiated emissions from commercially available PEDs, and compares them to international standards for airborne equipment. The goal is to provide insight for wireless product developers desiring to extend the freedom of their customers to use wireless products on-board aircraft, and to identify future product characteristics, test methods and technologies that may facilitate improved wireless freedom for airline passengers.

Ely, Jay J.↗
NASA NTRS1996

Selecting NiCd flight cells for the NOAA/TIROS program

Data from Standard NiCd battery cell vendors is found to be useful for identifying defective cells. A method has been developed to screen cells for flight battery use and identify prime candidate cells for life-cycle testing. Specific points from the cell vendor's data, which are related to fundamentals of NiCd cell chemistry (primarily oxygen recombination) and electrical performance (voltage and capacity), when sampled at key points, are found to be related to long-term LEO life-cycle performance.

Toft, Mark R.↗
NASA NTRS2008

Effects of Learning on Performance When Computerized Dynamic Posturography Assessments Are Repeated

Background: Computerized dynamic posturography is widely used to measure balance control performance. Clinically, performance is assessed by comparing individual data against standards obtained from a normative population. When performing repeated assessments to track performance changes, one must be concerned with the influence of learning effects. Subjects do not have the opportunity to practice before the first session, and often a second session is not performed prior to an experiment. Thus, the objective of this activity was to examine learning effects on balance control performance. We hypothesize that subjects will perform better on the second session when compared to the first, and that the difference will be greater for more difficult conditions. Methods: Data were collected from 204 subjects using the NeuroCom Equitest system during quiet stance with arms crossed at the chest on up to two sessions. All subjects performed standard sensory organization tests (SOTs) including 1) normal vision, fixed support; 2) absent vision, fixed support; 3) sway-referenced vision, fixed support; 4) normal vision, swayreferenced support; 5) absent vision, sway-referenced support; and 6) sway-referenced vision, sway-referenced support. 120 of these subjects performed modified sensory organization tests (mSOTs 2 and 5) which included static (20 back) and dynamic (20, 0.33Hz) head tilts. Median equilibrium scores (mEQ) were calculated from peak-to-peak anterior-posterior sway across trials. Data collected on the first session were then compared with the second to examine learning effect. Results: There were no differences in mEQ scores between the first and second sessions for SOTs 1, 2, and 4, while mEQ scores were higher for the second session when compared to the first for SOTs 3, 5, and 6 and for all mSOTs. Discussion: An additional familiarization session or practice trials prior to the first session may be necessary for more challenging SOT and mSOT conditions to minimize learning effect.

Taylor, Laura C.↗
NASA NTRS1992

Fracture toughness testing of polymer matrix composites

A review of the interlaminar fracture indicates that a standard specimen geometry is needed to obtain consistent fracture toughness measurements in polymer matrix composites. In general, the variability of measured toughness values increases as the toughness of the material increases. This variability could be caused by incorrect sizing of test specimens and/or inconsistent data reduction procedures. A standard data reduction procedure is therefore needed as well, particularly for the tougher materials. Little work has been reported on the effects of fiber orientation, fiber architecture, fiber surface treatment or interlaminar fracture toughness, and the mechanisms by which the fibers increase fracture toughness are not well understood. The little data that is available indicates that woven fiber reinforcement and fiber sizings can significantly increase interlaminar fracture toughness.

Grady, Joseph E.↗
NASA NTRS1993

Goddard Conference on Mass Storage Systems and Technologies, Volume 1

Copies of nearly all of the technical papers and viewgraphs presented at the Goddard Conference on Mass Storage Systems and Technologies held in Sep. 1992 are included. The conference served as an informational exchange forum for topics primarily relating to the ingestion and management of massive amounts of data and the attendant problems (data ingestion rates now approach the order of terabytes per day). Discussion topics include the IEEE Mass Storage System Reference Model, data archiving standards, high-performance storage devices, magnetic and magneto-optic storage systems, magnetic and optical recording technologies, high-performance helical scan recording systems, and low end helical scan tape drives. Additional topics addressed the evolution of the identifiable unit for processing purposes as data ingestion rates increase dramatically, and the present state of the art in mass storage technology.

Kobler, Ben↗