Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “stability constraint”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

Ares-I Bending Filter Design using a Constrained Optimization Approach

The Ares-I launch vehicle represents a challenging flex-body structural environment for control system design. Software filtering of the inertial sensor output is required to ensure adequate stable response to guidance commands while minimizing trajectory deviations. This paper presents a design methodology employing numerical optimization to develop the Ares-I bending filters. The design objectives include attitude tracking accuracy and robust stability with respect to rigid body dynamics, propellant slosh, and flex. Under the assumption that the Ares-I time-varying dynamics and control system can be frozen over a short period of time, the bending filters are designed to stabilize all the selected frozen-time launch control systems in the presence of parameter uncertainty. To ensure adequate response to guidance command, step response specifications are introduced as constraints in the optimization problem. Imposing these constrains minimizes performance degradation caused by the addition of the bending filters. The first stage bending filter design achieves stability by adding lag to the first structural frequency to phase stabilize the first flex mode while gain stabilizing the higher modes. The upper stage bending filter design gain stabilizes all the flex bending modes. The bending filter designs provided here have been demonstrated to provide stable first and second stage control systems in both Draper Ares Stability Analysis Tool (ASAT) and the MSFC MAVERIC 6DOF nonlinear time domain simulation.

Hall, Charles↗

Level-Set Topology Optimization with Aeroelastic Constraints

Level-set topology optimization is used to design a wing considering skin buckling under static aeroelastic trim loading, as well as dynamic aeroelastic stability (flutter). The level-set function is defined over the entire 3D volume of a transport aircraft wing box. Therefore, the approach is not limited by any predefined structure and can explore novel configurations. The Sequential Linear Programming (SLP) level-set method is used to solve the constrained optimization problems. The proposed method is demonstrated using three problems with mass, linear buckling and flutter objective and/or constraints. A constraint aggregation method is used to handle multiple buckling constraints in the wing skins. A continuous flutter constraint formulation is used to handle difficulties arising from discontinuities in the design space caused by a switching of the critical flutter mode.

Dunning, Peter D.↗

Thermal Decomposition Kinetics of 4,6‐Diamino‐5,7‐dinitro‐benzo‐furazan

This experimental study investigated the thermal decomposition kinetics of 4,6-diamino-5,7-dinitro-benzo-furazan (referred to as F1 hereafter)—an important decomposition product of 1,3,5-triamino-2,4,6-trinitrobenzene (TATB—a prototypical insensitive high explosive). Simultaneous differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and mass spectrometry (MS) measurements were employed to determine the decomposition kinetics of F1 and to track the evolution of product gases. The DSC profiles were measured at 10 different heating rates between 0.025°C/min and 10°C/min. The measured exotherms were influenced by F1 melting at heating rates above 0.25°C/min, and corresponding changes in decomposition enthalpy and TGA mass-loss-rate profiles indicated a transition from solid-to-gas decomposition to an increasing contribution from liquid-to-gas decomposition. Analysis of low-heating-rate DSC data between 0.025°C/min and 0.17°C/min with the extended Prout–Tompkins model yielded an activation energy of 305 kJ/mol for solid-to-gas F1 decomposition, higher than previous values inferred from TATB decomposition models involving F1. This study provides the first direct experimental determination of the energy barrier for F1 decomposition. MS measurements showed that the major gaseous products matched species previously reported for TATB decomposition (e.g., CO 2 , HCN, C 2 N 2 , etc.), with water identified as the dominant product. Furthermore, these results provide important experimental constraints for improving chemical kinetics models of TATB decomposition and for predicting the reactivity, stability, and safety of TATB-based high explosives under long-term aging conditions and abnormal thermal environments.

4,6-Diamino-5,7-dinitro-benzo-furazan↗

Orthorhombic Structures as Inorganic Halide Perovskite Models for High-Throughput DFT Investigations

Although high-symmetry Pm-3m space group cubic models are computationally efficient for high-throughput density functional theory (DFT) calculations of inorganic ternary (ABX 3 ) halide perovskites (HPs), they frequently predict band gaps (E g ) that disagree with experiment. Conversely, while low-symmetry cubic polymorphous networks (PN) comprised of 160 to 320 atoms incur significantly greater computational cost, they predict E g ’s that are more closely aligned with experiment. Here, in this study, we compare the DFT total energies and E g ’s predicted by four high-symmetry structure models (Pnma orthorhombic, R3m trigonal, P4/mbm tetragonal, and Pm-3m cubic) to cubic PNs for 5 experimentally characterized ternary HPs and find that the orthorhombic model computes Eg’s with the smallest MAD of 0.23 eV relative to the PNs. Pair distribution functions and DFT-computed total energies show that octahedral tilting, which is present in the 20-atom orthorhombic and 160-atom cubic PN models but not in the 5-atom cubic models, stabilizes all 5 compositions in our benchmarking set. We also find that imposing PN constraints when generating and optimizing these orthorhombic structures by fixing the unit cell lattice vectors and displacing the atoms prior to ionic relaxation with DFT, which we call the orthorhombic surrogate model (OSM), lowers the MAD of E g predictions to 0.09 eV. Our OSM predicts the PN band gaps of an additional 95 theoretical inorganic ternary HPs with MAD of 0.08 eV, supporting its usage in high-throughput DFT investigations to closely estimate PN band gaps with much less computational expense.

14 SOLAR ENERGY↗

A Nucleotide-Analogue-Induced Gain of Function Corrects the Error-Prone Nature of Human DNA Polymerase iota

Y-family DNA polymerases participate in replication stress and DNA damage tolerance mechanisms. The properties that allow these enzymes to copy past bulky adducts or distorted template DNA can result in a greater propensity for them to make mistakes. Of the four human Y-family members, human DNA polymerase iota (hpol{iota}) is the most error-prone. In the current study, we elucidate the molecular basis for improving the fidelity of hpol{iota} through use of the fixed-conformation nucleotide North-methanocarba-2{prime}-deoxyadenosine triphosphate (N-MC-dATP). Three crystal structures were solved of hpol{iota} in complex with DNA containing a template 2{prime}-deoxythymidine (dT) paired with an incoming dNTP or modified nucleotide triphosphate. The ternary complex of hpol{iota} inserting N-MC-dATP opposite dT reveals that the adenine ring is stabilized in the anti orientation about the pseudo-glycosyl torsion angle, which mimics precisely the mutagenic arrangement of dGTP:dT normally preferred by hpol{iota}. The stabilized anti conformation occurs without notable contacts from the protein but likely results from constraints imposed by the bicyclo[3.1.0]hexane scaffold of the modified nucleotide. Unmodified dATP and South-MC-dATP each adopt syn glycosyl orientations to form Hoogsteen base pairs with dT. The Hoogsteen orientation exhibits weaker base-stacking interactions and is less catalytically favorable than anti N-MC-dATP. Thus, N-MC-dATP corrects the error-prone nature of hpol{iota} by preventing the Hoogsteen base-pairing mode normally observed for hpol{iota}-catalyzed insertion of dATP opposite dT. These results provide a previously unrecognized means of altering the efficiency and the fidelity of a human translesion DNA polymerase.

59 BASIC BIOLOGICAL SCIENCES↗

Phenomenology and cosmology of no-scale attractor models of inflation

We have recently proposed attractor models for modulus fixing, inflation, supersymmetry breaking and dark energy based on no-scale supergravity. In this paper we develop phenomenological and cosmological aspects of these no-scale attractor models that underpin their physical applications. We consider models in which inflation is driven by a modulus field (T-type) with supersymmetry broken by a Polonyi field, or a matter field (φ-type) with supersymmetry broken by the modulus field. We derive the possible patterns of soft supersymmetry-breaking terms, which depend in T-type models whether the Polonyi and/or matter fields are twisted or not, and in φ-type models on whether the inflaton and/or other matter fields are twisted or not. In φ-type models, we are able to directly relate the scale of supersymmetry breaking to the inflaton mass. We also discuss cosmological constraints from entropy considerations and the density of dark matter on the mechanism for stabilizing the modulus field via higher-order terms in the no-scale K¨ahler potential.

79 ASTRONOMY AND ASTROPHYSICS↗

Studies of liquid floating zones on SL-IV, the third Skylab mission

The behavior of liquid floating zones in a zero-gravity environment was studied by Dr. E. Gibson on SL-4. These experiments were designed from the results of previous work on floating zones in a simulated zero-gravity model. Molten floating zones are used on earth for the crystal growth and zone refining of reactive materials. The Skylab studies give some insight into the problems associated with the development of the technique for the future space processing of materials. Preliminary results are presented on the stability of the liquid zone surface under static, rotational and vibrational conditions without gravitational constraints.

Carruthers, J. R.↗

Radar imaging from a spinning spacecraft

The feasibility of imaging the surface of Venus using a synthetic aperture radar in a spin stabilized Pioneer class spacecraft operating in an eccentric orbit is studied. Imaging radar fundamentals, constraints, power requirements and data processing considerations are reviewed. Additional effects due to operation from an elliptical orbit with a spinning spacecraft are covered. Recommended spin parameters are determined by simulations. Extensions to include noncoherent integration and stereo coverage are briefly reviewed. The results indicate that resolution on the order of 100 meters can be obtained from a 0.2 eccentricity orbit using a 2 meter antenna and reasonable transmitter power levels.

Bayma, R. W.↗

Study of wrap-rib antenna design

The results of a parametric design study conducted to develop the significant characteristics and technology limitations of space deployable antenna systems with aperture sizes ranging from 50 up to 300 m and F/D ratios between 0.5 and 3.0 are presented. Wrap/rib type reflectors of both the prime and offset fed geometry and associated feed support structures were considered. The significant constraints investigated as limitations on achievable aperture were inherent manufacturability, orbit dynamic and thermal stability, antenna weight, and antenna stowed volume. A data base, resulting in the defined maximum achievable aperture size as a function of diameter, frequency and estimated cost, was formed.

Wade, W. D.↗

Design of helicopter rotor blades for optimum dynamic characteristics

The possibilities and the limitations of tailoring blade mass and stiffness distributions to give an optimum blade design in terms of weight, inertia, and dynamic characteristics are investigated. Changes in mass or stiffness distribution used to place rotor frequencies at desired locations are determined. Theoretical limits to the amount of frequency shift are established. Realistic constraints on blade properties based on weight, mass moment of inertia size, strength, and stability are formulated. The extent hub loads can be minimized by proper choice of EL distribution is determined. Configurations that are simple enough to yield clear, fundamental insights into the structural mechanisms but which are sufficiently complex to result in a realistic result for an optimum rotor blade are emphasized.

Peters, D. A.↗

Design of helicopter rotor blades for optimum dynamic characteristics

The possibilities and limitations of tailoring blade mass and stiffness distributions to give an optimum blade design in terms of weight, inertia, and dynamic characteristics are discussed. The extent that changes in mass of stiffness distribution can be used to place rotor frequencies at desired locations is determined. Theoretical limits to the amount of frequency shift are established. Realistic constraints on blade properties based on weight, mass, moment of inertia, size, strength, and stability are formulated. The extent that the hub loads can be minimized by proper choice of E1 distribution, and the minimum hub loads which can be approximated by a design for a given set of natural frequencies are determined. Aerodynamic couplings that might affect the optimum blade design, and the relative effectiveness of mass and stiffness distribution on the optimization procedure are investigated.

Peters, D. A.↗

The magma ocean concept and lunar evolution

The model of lunar evolution in which the anorthositic plagioclase-rich oldest crust of the moon is formed over a period of 300 Myr or less by crystallization as it floats on a global ocean of magma tens or hundreds of km thick is examined in a review of petrological and theoretical studies. Consideration is given to the classification of lunar rocks, the evidence for primordial deep global differentiation, constraints on the depth of the molten zone, the effects of pressure on mineral stability relationships, mainly-liquid vs mainly-magmifer ocean models, and the evidence for multiple ancient differentiation episodes. A synthesis of the model of primordial differentiation and its aftereffects is presented, and the generalization of the model to the earth and to Mars, Mercury, Venus, and the asteroids is discussed.

Warren, P. H.↗

Twisting failure of centrally loaded open-section columns in the elastic range

In the following report a complete theory of twisting failure by the energy method is developed, based on substantially the same assumptions as those employed by Wagner and Bleich. Problems treated in detail are: the stress and strain condition under St. Venant twist and in twist with axial constraint; the concept of shear center and the energy method for problems of elastic stability.

Kappus, Robert↗

Aerodynamic configuration design using response surface methodology analysis

An investigation has been conducted to determine a set of optimal design parameters for a single-stage-to-orbit reentry vehicle. Several configuration geometry parameters which had a large impact on the entry vehicle flying characteristics were selected as design variables: the fuselage fineness ratio, the nose to body length ratio, the nose camber value, the wing planform area scale factor, and the wing location. The optimal geometry parameter values were chosen using a response surface methodology (RSM) technique which allowed for a minimum dry weight configuration design that met a set of aerodynamic performance constraints on the landing speed, and on the subsonic, supersonic, and hypersonic trim and stability levels. The RSM technique utilized, specifically the central composite design method, is presented, along with the general vehicle conceptual design process. Results are presented for an optimized configuration along with several design trade cases.

Engelund, Walter C.↗

Dynamic Stability and Control Problems of Piloted Reentry from Lunar Missions

A fixed-base simulator investigation has been made of stability and control problems during piloted reentry from lunar missions. Reentries were made within constraints of acceleration and skipping, in which the pilot was given simulated navigation tasks of altitude and heading angle commands. Vehicles considered included a blunt-face, high-drag capsule, and a low-drag lifting cone, each of which had a trim lift-drag ratio of 0.5. With the provision of three-axis automatic damping, both vehicles were easily controlled through reentry after a brief pilot-training period. With all dampers out, safe reentries could be made and both vehicles were rated satisfactory for emergency operation. In damper-failure conditions resulting in inadequate Dutch roll damping, the lifting-cone vehicle exhibited control problems due to excessive dihedral effect and oscillatory acceleration effects.

Moul, Martin T.↗

Ares I Flight Control System Design

The Ares I launch vehicle represents a challenging flex-body structural environment for flight control system design. This paper presents a design methodology for employing numerical optimization to develop the Ares I flight control system. The design objectives include attitude tracking accuracy and robust stability with respect to rigid body dynamics, propellant slosh, and flex. Under the assumption that the Ares I time-varying dynamics and control system can be frozen over a short period of time, the flight controllers are designed to stabilize all selected frozen-time launch control systems in the presence of parametric uncertainty. Flex filters in the flight control system are designed to minimize the flex components in the error signals before they are sent to the attitude controller. To ensure adequate response to guidance command, step response specifications are introduced as constraints in the optimization problem. Imposing these constraints minimizes performance degradation caused by the addition of the flex filters. The first stage bending filter design achieves stability by adding lag to the first structural frequency to phase stabilize the first flex mode while gain stabilizing the higher modes. The upper stage bending filter design gain stabilizes all the flex bending modes. The flight control system designs provided here have been demonstrated to provide stable first and second stage control systems in both Draper Ares Stability Analysis Tool (ASAT) and the MSFC 6DOF nonlinear time domain simulation.

Jang, Jiann-Woei↗

Neutrino dark energy with more than one neutrino species

The mass varying neutrino scenario is a model that successfully explains the origin of dark energy while at the same time solves the coincidence problem. The model is, however, heavily constrained by its stability towards the formation of neutrino bound states when the neutrinos become nonrelativistic. We discuss these constraints and find that natural, adiabatic, stable models with the right amount of dark energy today do not exist. Second, we explain why using the lightest neutrino, which is still relativistic, as an explanation for dark energy does not work because of a feedback mechanism from the heavier neutrinos.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Output feedback and generic stabilizability

Attention is given to questions of pole placement and stabilization for generic linear systems with prescribed state, input and output dimension for the case where the controller must be implemented by linear memoryless output feedback. A criterion is presented in terms of a special pole placement property for generic stabilizability, and this criterion is used to describe constraints on the dimension which are consistent with generic stabilizability. Also treated are the rationality and solvability by radicals of stabilizing or pole positioning gains, and the way in which decision algebra can theoretically handle existence questions for generic systems is described.

Byrnes, C. I.↗