SEARCH · Engineering Papers

Results for “spectral methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

All sources NASA NTRS DOE OSTI

NASA NTRS1981

Direct numerical simulations of turbulent shear flows

Numerical simulations of wakes of axisymmetric bodies and of turbulent mixing layers are reported. The flows were assumed to be statistically homogeneous in the mean flow direction, in concert with experimental data and the self-similarity theorem. The nonlinear Navier-Stokes equations were solved by a pseudo-spectral numerical method using a 32 x 32 x 33 point grid and an algorithm for fast Fourier transforms and inverse transforms. Leapfrog time differencing was employed on nonlinear terms and time differencing on viscous terms. Towed wakes and wakes behind a self-propelled body were simulated, showing that the towed wakes exhibited a proper temporal behavior after an initial period of adjustment, including the development of a kurtosis near the wake edge, which is experimentally verifiable. The mixing-layer simulation displayed the laboratory demonstrated presence of large scale features such as vortex cores, while the lateral coherence was weak.

Metcalfe, R. W.↗

NASA NTRS1982

Rotational analysis of CO2 bands near 4 microns

The band constants of CO2 bands near 2600 per cm have been estimated by the nonlinear least squares method and spectral curve fitting. The synthetic spectra calculated from these constants predict experimental values accurately and give very similar values for the line positions (to within 0.003 per cm for all but the weakest lines).

Hoke, M. L.↗

NASA NTRS1981

Free-jet acoustic investigation of high-radius-ratio coannular plug nozzles. Comprehensive data report, volume 1

Six coannular plug nozzle configurations having inverted velocity and temperature profiles, and a baseline convergent conical nozzle were tested for simulated flight acoustic evaluation in General Electric's Anechoic Free-Jet Acoustic Facility. The nozzles were tested over a range of test conditions that are typical of a Variable Cycle Engine for application to advanced high speed aircraft. The outer stream radius ratio for most of the configurations was 0.853, and the inner-stream-outer-stream area ratio was tested in the range of 0.54. Other variables investigated were the influence of bypass struts, a simple noncontoured convergent-divergent outer stream nozzle for forward quadrant shock noise control, and the effects of varying outer stream radius and inner-stream-to-outer-stream velocity ratios on the flight noise signatures of the nozzles. It was found that in simulated flight, the high-radius-ratio coannular plug nozzles maintain their jet noise and shock noise reduction features previously observed in static testing. The presence of nozzle bypass structs will not significantly effect the acoustic noise reduction features of a General Electric-type nozzle design. A unique coannular plug nozzle flight acoustic spectral prediction method was identified and found to predict the measured results quite well. Special laser velocimeter and acoustic measurements were performed which have given new insight into the jet and shock noise reduction mechanisms of coannular plug nozzles with regard to identifying further beneficial research efforts.

Knott, P. R.↗

NASA NTRS1983

Nonlinear dynamics and control of a vibrating rectangular plate

The von Karman equations of nonlinear elasticity are solved for the case of a vibrating rectangular plate by meams of a Fourier spectral transform method. The amplification of a particular Fourier mode by nonlinear transfer of energy is demonstrated for this conservative system. The multi-mode system is reduced to a minimal (two mode) system, retaining the qualitative features of the multi-mode system. The effect of a modal control law on the dynamics of this minimal nonlinear elastic system is examined.

Shebalin, J. V.↗

NASA NTRS1982

A new numerical method for the simulation of three-dimensional flow in a pipe

A new numerical technique for simulating three dimensional, unsteady, incompressible pipe flows is presented and its utility and accuracy is shown. Each vector function in the expansion of the velocity field is divergence free and satisfies the boundary conditions for viscous flow. Some of the benefits of the expansion technique are that pressure is eliminated from the dynamics, only two unknowns per mesh point are required, implicit treatment of the viscous terms is provided at no extra computational cost, and no fractional time steps are required. The method uses spectral expansions: Fourier series in the azimuthal and streamwise directions, and Jacobi polynominals in the radial direction. Previously announced in STAR as N82-31644

Leonard, A.↗

NASA NTRS1984

Direct numerical simulation of curved turbulent channel flow

Low Reynolds number, mildly curved, turbulent channel flow has been simulated numerically without subgrid scale models. A new spectral numerical method developed for this problem was used, and the computations were performed with 2 million degrees of freedom. A variety of statistical and structural information has been extracted from the computed flow fields. These include mean velocity, turbulence stresses, velocity skewness, and flatness factors, space time correlations and spectra, all the terms in the Reynolds stress balance equations, and contour and vector plots of instantaneous velocity fields. The effects of curvature on this flow were determined by comparing the concave and convex sides of the channel. The observed effects are consistent with experimental observations for mild curvature. The most significant difference in the turbulence statistics between the concave and convex sides was in the Reynolds shear stress. This was accompanied by significant differences in the terms of the Reynolds shear stress balance equations. In addition, it was found that stationary Taylor-Gortler vortices were present and that they had a significant effect on the flow by contributing to the mean Reynolds shear stress, and by affecting the underlying turbulence.

Moser, R. D.↗

NASA NTRS1984

MMIC devices for active phased array antennas

The study of printed circuit discontinuities is necessary in order to design, for example, transitions between rectangular waveguides and printed circuits. New developments with respect to the analytical approaches to this problem are discussed. A summary of the progress in the experimental approach is presented. The accurate solution for the modes in various millimeter-wave waveguides is essential in the analysis of many integrated circuit components, such as filters and impedance transformers. Problems associated with the numerical computation of these modes in two frequently used waveguide forms, namely, the finline and microstrip, are presented. The spectral domain method of formulation, with a moment method solution, is considered. This approach can be readily extended to analyze an arbitrary configuration of dielectric and metallized regions in a shielded enclosure. Galerkin's method is used, where the testing and basic functions are the same. It is shown that the mode functions, or eigenfunctions, are more sensitive to errors than the phase constants, or eigenvalues. The approximate mode functions do not satisfy the orthogonality relationship well, resulting in difficulties when these modal solutions are used to form an approximate Green's function or are used in a mode matching analysis.

Mittra, R.↗

NASA NTRS1984

Lifetimes in Si CVD-epitaxial and other layers determined by spectral LBIC

In an effort to evaluate the minority carrier lifetimes in CVD-epitaxially grown layers in their dependence on the CVD process variables, the absolute spectral LBIC method was found to be the only available method capable of yielding both lifetime and surface recombination velocity in layers, independent of the resistivity of this layer or that of the substrate, as long as they are separated by a pn-junction. With this method, it was not only possible to determine the minority carrier lifetimes in as-grown epi-layers, but to observe their changes through the device fabrication processes. In addition, it was possible for the first time to determine the lifetimes in the alloy-regrowth p(+) layers of base high/low junction structures.

Wolf, M.↗

NASA NTRS1984

Ultraviolet observations of solar flares from the Solar Maximum Mission

The results of observations of solar flares, obtained by means of the UV Spectrophotometer and Polarimeter (UVSP) instrument on board the Solar Maximum Mission satellite are summarized and discussed. The results are grouped into three main topics: (1) plasma diagnostics in the flare transition zone plasmas, (2) spatial and temporal evolutions of the UV and hard X-ray bursts, and (3) energy release processes in the impulsive phase. The methods of spectral UV analysis, comparison with the hard X-ray burst results, and the interpretation of the results are summarized. It is concluded that the energy release processes in the flare phase can be best interpreted in terms of multiple large and small interloops interacting with each other either mechanically or inductively. Furthermore, the majority of impulsive UV and hard X-ray bursts occurs in small compact loops with high densities and transition-zone temperatures. The impulsive hard X-ray and UV bursts are emitted by nonthermal particles, accelerated by the loop interactions and impinging on the footpoints of these loops.

Cheng, C.-C.↗

NASA NTRS1985

Evolution of a vortical structure associated with the bursting event in a channel flow

The temporal evolution of a horseshoe vortex structure in a channel is investigated by a numerical simulation. A spectral numerical method is employed to integrate the time-dependent, three-dimensional Navier-Stokes equations. The initial vortical structure is obtained by applying a conditional sampling technique to a data base generated from a direct simulation of a turbulent channel flow. The evolution of this vortical structure under the influence of the self-induced motion and the mean shear is presented. It is shown that the initial sheet-like vortical structure rolls up into a vortex tube as it is convected downstream. Turbulence structures associated with the vortex stretching are investigated. Production of vorticity stretching is high inside the vortex legs, although it is also substantial in the tip region and above the legs. High Reynolds shear stress is produced near the tip of the vortex.

Kim, J.↗

NASA NTRS1985

Effects of wall curvature on turbulence statistics

A three-dimensional, time-dependent, direct numerical simulation of low-Reynolds number turbulent flow in a mildly curved channel was performed, and the results examined to determine the mechanism by which curvature affects wall-bounded turbulent shear flows. A spectral numerical method with about one-million modes was employed, and no explicit subgrid scale model was used. The effects of curvature on this flow were determined by comparing the concave and convex sides of the channel. The observed effects are consistent with experimental observations for mild curvature. The most significant difference in the turbulence statistics between the concave and convex sides is in the Reynolds shear stress. This is accompanied by significant differences in the terms of the Reynolds shear stress balance equations. In addition, it was found that stationary Taylor-Goertler vortices were present and that they had a significant effect on the flow by contributing to the mean Reynolds shear stress, and by enhancing the difference between the wall shear stresses.

Moser, R. D.↗

NASA NTRS1984

Free-jet acoustic investigation of high-radius-ratio coannular plug nozzles

The experimental and analytical results of a scale model simulated flight acoustic exploratory investigation of high radius ratio coannular plug nozzles with inverted velocity and temperature profiles are summarized. Six coannular plug nozzle configurations and a baseline convergent conical nozzle were tested for simulated flight acoustic evaluation. The nozzles were tested over a range of test conditions that are typical of a Variable Cycle Engine for application to advanced high speed aircraft. It was found that in simulate flight, the high radius ratio coannular plug nozzles maintain their jet noise and shock noise reduction features previously observed in static testing. The presence of nozzle bypass struts will not significantly affect the acousticn noise reduction features of a General Electric type nozzle design. A unique coannular plug nozzle flight acoustic spectral prediction method was identified and found to predict the measured results quite well. Special laser velocimeter and acoustic measurements were performed which have given new insights into the jet and shock noise reduction mechanisms of coannular plug nozzles with regard to identifying further benificial research efforts.

Knott, P. R.↗

NASA NTRS1986

Finite length effects in Taylor-Couette flow

Axisymmetric numerical solutions of the unsteady Navier-Stokes equations for flow between concentric rotating cyclinders of finite length are obtained by a spectral collocation method. These representative results pertain to two-cell/one-cell exchange process, and are compared with recent experiments.

Streett, C. L.↗

NASA NTRS1986

Application of TIMS data in stratigraphic analysis

An in-progress study demonstrates the utility of Thermal Infrared Multispectral Scanner (TIMS) data for unraveling the stratigraphic sequence of a western interior, North American foreland basin. The TIMS data can be used to determine the stratigraphic distribution of minerals that are diagnostic of specific depositional distribution. The thematic mapper (TM) and TIMS data were acquired in the Wind River/Bighorn area of central Wyoming in November 1982, and July 1983, respectively. Combined image processing, photogeologic, and spectral analysis methods were used to: map strata; construct stratigraphic columns; correlate data; and identify mineralogical facies.

Lang, H. R.↗

NASA NTRS1986

Generalized INF-SUP condition for Chebyshev approximation of the Navier-Stokes equations

An abstract mixed problem and its approximation are studied; both are well-posed if and only if several inf-sup conditions are satisfied. These results are applied to a spectral Galerkin method for the Stokes problem in a square, when it is formulated in Chebyshev weighted Sobolev spaces. Finally, a collocation method for the Navier-Stokes equations at Chebyshev nodes is analyzed.

Bernardi, Christine↗

NASA NTRS1985

Free-jet investigation of mechanically suppressed, high radius ratio coannular plug model nozzles

The experimental and analytical acoustic results of a scale-model investigation or unsuppressed and mechanically suppressed high-radius ratio coannular plug nozzles with inverted velocity and temperature profiles are summarized. Nine coannular nozzle configurations along with a reference conical nozzle were evaluated in the Anechoic Free-Jet Facility for a total of 212 acoustic test points. Most of the tests were conducted at variable cycle engine conditions applicable to advanced high speed aircraft. The tested nozzles included coannular plug nozzles with both convergent and convergent-divergent (C-D) terminations in order to evaluate C-D effectiveness in the reduction of shock-cell noise and 20 and 40 shallow-chute mechanical suppressors in the outer stream in order to evaluate their effectiveness in the reduction of jet noise. In addition to the acoustic tests, mean and turbulent velocity measurements were made on selected plumes of the 20 shallow-chute configuration using a laser velocimeter. At a mixed jet velocity of 700 m/sec, the 20 shallow-chute suppressor configuration yielded peak aft quadrant suppression of 11.5 and 9 PNdB and forward quadrant suppression of 7 and 6 PNdB relative to a baseline conical nozzles during static and simulated flight, respectively. The C-D terminations were observed to reduce shock-cell noise. An engineering spectral prediction method was formulated for mechanically suppressed coannular plug nozzles.

Janardan, B. A.↗

NASA NTRS1986

Laser diode combining for free space optical communication

The maximization of photon delivery to a distant collector in free space optical communications systems calls for a laser diode-combining technique employing wavelength and/or polarization as the bases of its operation. Design considerations for such a combiner encompass high throughput efficiency, diffraction-limited angular divergence, and reasonable volume constraints. Combiners are presently found to require a generalized Strehl ratio concept which includes relative source misalignment; diffraction grating combiners may have a limited number of laser sources which can meet spectral requirements. Methods for the incorporation of a combiner into a communication system are compared. Power combining is concluded to be the best tradeoff of performance and complexity for all systems, except those that are severely limited by either background radiation or component bandwidth.

Mecherle, G. Stephen↗

NASA NTRS1987

Stability and resonance in grooved-channel flows

Numerical simulation using the spectral element method is used to study the stability and resonant response of incompressible moderate-Reynolds-number flows in periodically-grooved channels. For Reynolds numbers below a critical value, the flow is shown to approach a stable steady-state, and the least stable modes resemble Tollmien-Schlichting channel waves. For Reynolds numbers greater than the critical value, self-sustained oscillations result. Oscillatory perturbation of the grooved-channel flow at the frequency of the least stable mode of the linearized system is found to result in subcritical resonant excitation as the critical Reynolds number is approached. The importance of nonhomogeneous geometry in the forced response of the flow is discussed.

Ghaddar, Nasreen K.↗