Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “spaceborne”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

Conceptual design of a spaceborne lightning sensor

A conceptual design of a broad-area optical lightning telescope sensor (BOLTS) designed to provide full-time (day/night) coverage of the continental United States from a geosynchronous orbit is described. Variations are discussed that could cover the whole globe from four to five geosynchronous satellites or cover only smaller areas with a high (2.5 km) resolution. The design is based on research results of the initial phase of a NASA-sponsored program. The ground resolution will be 8 x 8 km. The focal plane is an 800 x 800 pixel CCD array, electronically subdivided to allow for the high data rates (1000 frames per sec) imposed by the characteristics of lightning flashes. It will detect lightning strokes whose optical power is greater than 10 million watts, with a probability of detection of 0.9, and a false alarm rate of 0.1.

Wolfe, W. L.↗

Infrared experiments for spaceborne planetary atmospheres research. Executive summary

The role of 0.5 to 300 micron remote sensing in planetary atmospheres exploration was evaluated by examining a broad range of measurement techniques including quantitative intercomparisons of existing and planned instruments by the phenomenological method. Key areas of infrared instrumentation requiring development for the investigations of atmospheres were identified.

Source record↗

Design, development and mechanization of a precision deployable truss with optimized structural efficiency for spaceborne applications

A deployable mast concept which meets the weight, size and stability requirements for a feed support structure for offset antennas up to 100 meters in diameter is discussed. A triangulated truss configuration, the use of tapered tubes which exhibit a high strength-to-weight ratio, and low CTE graphite-epoxy material are seen to provide an efficient, lightweight and stable truss suitable for an antenna feed support. A low stowage ratio of 30:1 is achieved through a unique preloaded hinge located at the center of each longeron and an autonomous deployment cage with a drive mechanism. Initial analysis and proof of concept hardware validated the basic mechanism and design assumptions and provided a basis for further investigation. The concept can readily accept variations in member size and thus lends itself to optimization for other potential uses where a stiff, lightweight deployable truss is needed.

Craighead, N. D.↗

Spaceborne scanner imaging system errors

The individual sensor system design elements which are the priori components in the registration and rectification process, and the potential impact of error budgets on multitemporal registration and side-lap registration are analyzed. The properties of scanner, MLA, and SAR imaging systems are reviewed. Each sensor displays internal distortion properties which to varying degrees make it difficult to generate on orthophoto projection of the data acceptable for multiple pass registration or meeting national map accuracy standards and is also affected to varying degrees by relief displacements in moderate to hilly terrain. Nonsensor related distortions, associated with the accuracy of ephemeris determination and platform stability, have a major impact on local geometric distortions. Platform stability improvements expected from the new multi mission spacecraft series and improved ephemeris and ground control point determination from the NAVSTAR/global positioning satellite systems are reviewed.

Prakash, A.↗

Geometric and rediametric distortion in spaceborne SAR imagery

Distortions inherent on synthetic aperture radio (SAR) imagery and the development to date of unsupervised postprocessing rectification techniques are described. The geometric distortion can be divided into two categories: (1) distortion derived from the radar viewing geometry, this includes such effects as ground range nonlinearities, radar foreshortening and radar layover; (2) distortion introduced during the data processing, these distortions result from approximations made during the correlation such as in estimation of the target phase history, or compensation for the earth rotation. The processor induced distortions depends on the specific correlation algorithm used for image formation. The effects are addressed on the image product resulting from assumptions during the processing and it specifically considers distortions inherent in digital imagery produced by the digital image processor.

Curlander, J. C.↗

Adaptively pointing spaceborne radar for precipitation measurements

An auxiliary concept of adaptive pointing is presented as an aid to space-based measurements of precipitation using microwave radar. It is recommended that the instantaneous field of view (IFOV) be limited to cloudy regions of possible precipitation rather than scanning clear-sky areas of no interest. A microwave imager is proposed for scanning ahead of the satellite in order to identify areas of precipitation, and then an on-board antenna controller can reposition the scanning antenna to obtain reflectivities for use in rainfall-reflectivity relationships. The precursor beam could delineate the storm boundaries and determine points of peak intensity which can then be selectively sampled to find the rainfall rate distribution for the storm. The adaptive-beam system is suggested to be implementable using an IR sensor on-board geosynchronous satellites.

Atlas, D.↗

Intensified charge coupled devices for use as a spaceborne spectrographic image-plane detector system

An instrument that has been developed for studies of atmospheric emissions from the Space Shuttle comprises an array of imaging spectrometers to observe features over the 300-12,000-A wavelength range. Each spectrometer has a 2-D image-plane detector system on which spectral information is dispersed in one direction and spatial information is resolved in the other. The detectors consist of CCD arrays which are coupled to proximity focused image intensifiers. The intensifier in each case is selected for the wavelength range covered by the particular spectrometer. The result is a compact low-power spectrographic detector system. In the course of building the five flight detector systems, there was occasion to evaluate a larger number of the charge coupled devices and the proximity focused image intensifiers. Various characteristics, advantages, and shortcomings of these devices and the overall intensified CCD system are reported.

Torr, M. R.↗

Combined spaceborne and conventional measurements for precipitation estimation

In order to overcome the limitations of both IR/visible and microwave radiometer based techniques, a "hybrid' scheme is suggested whose accuracy is investigated using radar based simulations. Such a scheme could potentially combine the high temporal resolution of the vis/IR imagery with the anticipated rain rate estimating ability of the next generation of satelliteborne microwave radiometers.

Vonderhaar, T. H.↗

Detection of rainfall rates utilizing spaceborne microwave radiometers

To demonstrate the success of utilizing passive microwave sensors in monitoring synoptic scale rainfall, two studies are described in which electrically scanning microwave radiometers (ESMR-5 and 6) on board Nimbus 5 and 6 were employed using a Langrangian frame of reference. The first study suggests a method of utilizing ESMR-5 measurements to quantize rainfall over water within tropical and extratropical storms and to use these measurements to monitor and possibly predict storm intensity. The second study suggests a method of monitoring the coverage and movement of synoptic rain over land by employing ESMR-6.

Burke, H. H. K.↗

Spaceborne precipitation radar

The performances and characteristics of a satelliteborne radar operating in the millimeter wavelength region of the spectrum with emphasis placed on the 35 and 94 GH3 frequency bands are discussed. It is concluded that millimetric wavelengths provide an acceptable solution for the design of satelliteborne active microwave equipment.

Eckerman, J.↗

Adaptively pointing spaceborne radar for precipitation measurements

An auxiliary concept of adaptive pointing applicable to meteorological radar is discussed. This control technique would resolve the conflicts among speed of scan or scan width, resolution, and dwell time per resolution element. At T1(orbital position) a passive infrared radiometer imager scans a swath ahead of the spacecraft; an appropriate algorithm indicates which clouds are probably producing precipitation. These locations are then used by the on-board antenna controller to program the antenna scan so that the radar samples clouds A and B at times T2 and T3 respectively.

Atlas, D.↗

Amplitude calibration of spaceborne synthetic aperture radars

Problems encountered during attempts to calibrate SAR imagery, recent successful experiments conducted with SEASAT SAR data, and a proposed program for the calibration and validation of the radar imagery from the forthcoming SIR-B SAR are discussed. The SEASAT SAR data for 10 passes over Death valley, California, were processed with a modified digital correlator. The procedure included a preliminary screening of the data to check for raw data saturation, compensation of waveforms and estimation of the amplitude of the pilot tone. All data was normalized to this pilot tone signal to reduce the effects of variable gains in the data links and ground receivers. The digital correlation algorithm generated image data. Evaluation of 6 passes results in a maximum pass to pass gain variation of only 1.1 dB and a standard deviation amongst the passes of 0.35 dB.

Held, D. N.↗

Large spaceborne antenna technology: A system perspective

Land Mobile Satellite System (LMSS) is a communication system which provides radio communication to a large group of users within a vast geographical area (e.g. communications to and from mobile vehicles anywhere within the U.S.). Such radio communication may be in the form of radio telephone, paging, dispatch, or data transmission. The intended applications of LMSS range from emergency medical to disaster relief, from law enforcement to truck dispatch. By providing service to vast rural areas, LMSS compliments the current terrestrial service in the metropolitan areas and hence provides for a nationally ubiquitous coverage.

Naderi, F.↗

A spaceborne superconducting gravity gradiometer for mapping the earth's gravity field

The principles of a satellite gravity gradiometer system which measures all five independent components of the gravity gradient tensor with a sensitivity of 0.001 E/Hz to the 1/2 power or better, are analyzed, and the status of development of the system is reviewed. The superconducting gravity gradiometer uses sensitive superconducting accelerometers, each of which are composed of a weakly suspended superconducting proof mass, a superconducting magnetic transducer, and a low-noise superconducting magnetometer. The magnetic field produced by the transducer coils is modulated by the motion of the proof mass and detected by the magnetometer. A combination of two or four of such accelerometers with proper relative orientation of sensitive axes results in an in-line or a cross component gravity gradiometer.

Paik, H. J.↗

Advanced sensors for spaceborne measurements of the earth's atmosphere

Concepts involved in remote sensing from space are reviewed, together with performance requirements of proposed and planned equipment. Attention is focused on measurements of the troposphere, particularly meteorological variables and chemical species. The principles of absorption, using either passive or active sensors, emission detection, fluorescence measurements, and EM radiation scattering are outlined. The proposed NASA Windsat, using a CO2 laser from the Orbiter or from an 800 km orbit spacecraft to measure low-level wind speeds is described, as are the uses of the AMTS atmospheric sounder instrument for IR atmospheric temperature sensing and a 20-channel microwave radiometer to detect moisture profiles in the water vapor bands. Additionally, a microwave pressure sounder to detect backscattered signals at 60 GHz is outlined, along with lidar pressure and wind speed measurement methods.

Hinkley, E. D.↗

Spaceborne lidar measurement accuracy - Simulation of aerosol, cloud, molecular density, and temperature retrievals

In connection with studies concerning the use of an orbiting optical radar (lidar) to conduct aerosol and cloud measurements, attention has been given to the accuracy with which lidar return signals could be measured. However, signal-measurement error is not the only source of error which can affect the accuracy of the derived information. Other error sources are the assumed molecular-density and atmospheric-transmission profiles, and the lidar calibration factor (which relates signal to backscatter coefficient). The present investigation has the objective to account for the effects of all these errors sources for several realistic combinations of lidar parameters, model atmospheres, and background lighting conditions. In addition, a procedure is tested and developed for measuring density and temperature profiles with the lidar, and for using the lidar-derived density profiles to improve aerosol retrievals.

Russell, P. B.↗