Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “shear flow”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27
All sourcesNASA NTRSDOE OSTI
NASA NTRS1946

Numerical procedures for the calculation of the stresses in monocoques III : calculation of the bending moments in fuselage frames

This report deals with the calculation of the bending moments in and the distortions of fuselage rings upon which known concentrated and distributed loads are acting. In the procedure suggested, the ring is divided into a number of beams each having a constant radius of curvature. The forces and moments caused in the end sections of the beams by individual unit displacements of the end sections are listed in a table designated as the operations table in conformity with Southwell's nomenclature. The operations table and the external loads are equivalent to a set of linear equations. For their solution the following three procedures are presented: 1) Southwell's method of systematic relaxations. This is a step-by-step approximation procedure guided by the physical interpretation of the changes in the values of the unknown. 2) The growing unit procedure in which the individual beams are combined successively into beams of increasing length until finally the entire ring becomes a single beam. In each step of the procedure a set of not more than three simultaneous linear equations is solved. 3) Solution of the entire set of simultaneous equations by the methods of the matrix calculus. In order to demonstrate the manner in which the calculations may be carried out, the following numerical examples are worked out: 1) Curved beam with both its end sections rigidly fixed. The load is a concentrated force. 2) Egg-shape ring with symmetric concentrated loads. 3) Circular ring with antisymmetric concentrated loads and shear flow (torsion of the fuselage). 4) Same with V-braces incorporated in the ring. 5) Egg-shape ring with antisymmetric concentrated loads and shear flow (torsion of the fuselage). 6) Same with V-braces incorporated in the ring. The results of these calculations are checked, whenever possible, by calculations carried out according to known methods of analysis. The agreement is found to be good. The amount of work necessary for the solution of ring problems by the methods described in the present report is practically independent of the degree of redundancy of the structure. For this reason the methods are recommended for use particularly in problems of rings having one or more internal bracing elements.

LOADS - FUSELAGES↗
NASA NTRS1994

Small-scale behavior in distorted turbulent boundary layers at low Reynolds number

During the last three years we have conducted high- and low-Reynolds-number experiments, including hot-wire measurements of the velocity fluctuations, in the test-section-ceiling boundary layer of the 80- by 120-foot Full-Scale Aerodynamics Facility at NASA Ames Research Center, to test the local-isotropy predictions of Kolmogorov's universal equilibrium theory. This hypothesis, which states that at sufficiently high Reynolds numbers the small-scale structures of turbulent motions are independent of large-scale structures and mean deformations, has been used in theoretical studies of turbulence and computational methods such as large-eddy simulation; however, its range of validity in shear flows has been a subject of controversy. The present experiments were planned to enhance our understanding of the local-isotropy hypothesis. Our experiments were divided into two sets. First, measurements were taken at different Reynolds numbers in a plane boundary layer, which is a 'simple' shear flow. Second, experiments were designed to address this question: will our criteria for the existence of local isotropy hold for 'complex' nonequilibrium flows in which extra rates of mean strain are added to the basic mean shear?

Saddoughi, Seyed G.↗
NASA NTRS1993

Turbulent mixing layers in the interstellar medium of galaxies

We propose that turbulent mixing layers are common in the interstellar medium (ISM). Injection of kinetic energy into the ISM by supernovae and stellar winds, in combination with density and temperature inhomogeneities, results in shear flows. Such flows will become turbulent due to the high Reynolds number (low viscosity) of the ISM plasma. These turbulent boundary layers will be particularly interesting where the shear flow occurs at boundaries of hot (approximately 10(exp 6) K) and cold or warm (10(exp 2) - 10(exp 4) K) gas. Mixing will occur in such layers producing intermediate-temperature gas at T is approximately equal to 10(exp 5.0) - 10(exp 5.5) that radiates strongly in the optical, ultraviolet, and EUV. We have modeled these layers under the assumptions of rapid mixing down to the atomic level and steady flow. By including the effects of non-equilibrium ionization and self-photoionization of the gas as it cools after mixing, we predict the intensities of numerous optical, infrared, and ultraviolet emission lines, as well as absorption column densities of C 4, N 5, Si 4, and O 6.

Slavin, J. D.↗
NASA NTRS1995

On the consistency of Reynolds stress turbulence closures with hydrodynamic stability theory

The consistency of second-order closure models with results from hydrodynamic stability theory is analyzed for the simplified case of homogeneous turbulence. In a recent study, Speziale, Gatski, and MacGiolla Mhuiris showed that second-order closures are capable of yielding results that are consistent with hydrodynamic stability theory for the case of homogeneous shear flow in a rotating frame. It is demonstrated in this paper that this success is due to the fact that the stability boundaries for rotating homogeneous shear flow are not dependent on the details of the spatial structure of the disturbances. For those instances where they are -- such as in the case of elliptical flows where the instability mechanism is more subtle -- the results are not so favorable. The origins and extent of this modeling problem are examined in detail along with a possible resolution based on rapid distortion theory (RDT) and its implications for turbulence modeling.

Speziale, Charles G.↗
NASA NTRS1973

Sound measurements within and in the radiated field of an annular duct with flow.

Recent theory on sound propagation for flow ducts initiated a research program (sponsored by NASA-Langley, Contract NAS1-10472) which has the objective of comparing detailed acoustical measurements with the analytical predictions for sound propagation in a duct with sheared flow. The effects considered experimentally mean flow, shear, wall impedance, and source distribution on sound propagation within and radiation from finite lenght annular ducts. Results reported here are confined to acoustic distribution in hard annular ducts with and without mean flow and radiated field patterns for the same conditions. The acoustic distributions are shown for single and multi-mode excitation. The flow duct facility is also described.

Plumblee, H. E.↗
NASA NTRS1994

Direct numerical simulation of incompressible axisymmetric flows

In the present work, we propose to conduct direct numerical simulations (DNS) of incompressible turbulent axisymmetric jets and wakes. The objectives of the study are to understand the fundamental behavior of axisymmetric jets and wakes, which are perhaps the most technologically relevant free shear flows (e.g. combuster injectors, propulsion jet). Among the data to be generated are various statistical quantities of importance in turbulence modeling, like the mean velocity, turbulent stresses, and all the terms in the Reynolds-stress balance equations. In addition, we will be interested in the evolution of large-scale structures that are common in free shear flow. The axisymmetric jet or wake is also a good problem in which to try the newly developed b-spline numerical method. Using b-splines as interpolating functions in the non-periodic direction offers many advantages. B-splines have local support, which leads to sparse matrices that can be efficiently stored and solved. Also, they offer spectral-like accuracy that are C(exp O-1) continuous, where O is the order of the spline used; this means that derivatives of the velocity such as the vorticity are smoothly and accurately represented. For purposes of validation against existing results, the present code will also be able to simulate internal flows (ones that require a no-slip boundary condition). Implementation of no-slip boundary condition is trivial in the context of the b-splines.

Loulou, Patrick↗
NASA NTRS1954

Stress distributions caused by three types of loading on a circular semimonocoque cylinder with flexible rings

Equations are derived for the stress distributions caused by three types of loading on infinitely long circular, semimonocoque cylinders with flexible rings. The results are given as formula for the stringer loads and shear flows in the shell due to each type of loading. For each loading case these formulas can be used to construct tables of influence coefficients giving stringer loads and shear flows in the neighborhood of the load due to a unit magnitude of the load. (author)

Mccomb, Harvey G , Jr↗
DOE OSTI2024

Turbulence spreading effects on the ELM size and SOL width

BOUT++ turbulence simulations were performed to investigate the impact of turbulence spreading on the edge localized mode (ELM) size and divertor heat flux width (λ q ) broadening in small ELM regimes. Here, this study is motivated by EAST experiments. BOUT++ linear simulations of a pedestal radial electric field (E r ) scan show that the dominant toroidal number mode (n) shifts from high-n to low-n, with a narrow mode spectrum, and the maximum linear growth rate increases as the pedestal E r well deepens. The nonlinear simulations show that as the net E × B pedestal flow increases, the pressure fluctuation level and its inward penetration beyond the top of the pedestal both increase. This leads to a transition from small ELMs to large ELMs. Both inward and outward turbulence spreading are sensitive to the scrape-off-layer (SOL) plasma profiles. The inward turbulence spreading increases for the steep SOL profiles, leading to increasing pedestal energy loss in the small ELM regime. The SOL width (λ q ) is significantly broadened progressing from the ELM-free to small ELM regime, due to the onset of strong radial turbulent transport. The extent of the SOL width (λ q ) broadening depends strongly on outward turbulence spreading. The fluctuation energy intensity flux Γ ε at the separatrix can be enhanced by increasing either pedestal E r flow shear or local SOL pressure gradient. The λ q is broadened as the fluctuation energy intensity flux Γ ε at the last close flux surface (LCFS) increases. Local SOL E × B flow shear will restrain outward turbulence spreading and the associated heat flux width broadening. Operating in H-mode with small ELMs has the potential to solve two critical problems: reducing the ELM size and broadening the SOL width.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1978

On the production and interaction of planetary solitary waves - Applications to the Jovian atmosphere

Further evidence is presented that strengthens the case for the interpretation of many features in the Jovian atmosphere as solitary Rossby waves (solitons). These include: a mechanism whereby such waves can evolve from the instability of the basic shear flows; further interpretation of the interaction between observed features, and comparison with calculations of the interaction between planetary solitons of a restricted class; and calculations of soliton morphology for a type of shear flow other than the type considered originally by Maxworthy and Redekopp (1976).

Maxworthy, T.↗
NASA NTRS1992

Weakly nonlinear models for turbulent mixing in a plane mixing layer

New closure models for turbulent free shear flows are presented in this paper. They are based on a weakly nonlinear theory with a description of the dominant large-scale structures as instability waves. Two models are presented that describe the evolution of the free shear flows in terms of the time-averaged mean flow and the dominant large-scale turbulent structure. The local characteristics of the large-scale motions are described using linear theory. Their amplitude is determined from an energy integral analysis. The models have been applied to the study of an incompressible mixing layer. For both models, predictions of the mean flow developed are made. In the second model, predictions of the time-dependent motion of the large-scale structures in the mixing layer are made. The predictions show good agreement with experimental observations.

Liou, William W.↗
NASA NTRS1990

Modeling the turbulent kinetic energy equation for compressible, homogeneous turbulence

The turbulent kinetic energy transport equation, which is the basis of turbulence models, is investigated for homogeneous, compressible turbulence using direct numerical simulations performed at CTR. It is shown that the partition between dilatational and solenoidal modes is very sensitive to initial conditions for isotropic decaying turbulence but not for sheared flows. The importance of the dilatational dissipation and of the pressure-dilatation term is evidenced from simulations and a transport equation is proposed to evaluate the pressure-dilatation term evolution. This transport equation seems to work well for sheared flows but does not account for initial condition sensitivity in isotropic decay. An improved model is proposed.

Aupoix, B.↗
DOE OSTI2020

Solitary zonal structures in subcritical drift waves: a minimum model

Solitary zonal structures have recently been identified in gyrokinetic simulations of subcritical drift-wave (DW) turbulence with background shear flows. However, the nature of these structures has not been fully understood yet. Here, we show that similar structures can be obtained within a reduced model, which complements the modified Hasegawa–Mima equation with a generic primary instability and a background shear flow. We also find that these structures can be qualitatively reproduced in the modified Hasegawa–Wakatani equation, which subsumes the reduced model as a limit. In particular, we illustrate that in both cases, the solitary zonal structures approximately satisfy the same 'equation of state', which is a local relation connecting the DW envelope with the zonal-flow velocity. Due to this generality, our reduced model can be considered as a minimum model for solitary zonal structures in subcritical DWs.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

A Nonlocal Magneto-curvature Instability in a Differentially Rotating Disk

A global mode is shown to be unstable to nonaxisymmetric perturbations in a differentially rotating Keplerian disk containing either vertical or azimuthal magnetic fields. In an unstratified cylindrical disk model, using both global eigenvalue stability analysis and linear global initial-value simulations, it is demonstrated that this instability dominates at strong magnetic fields where local standard magnetorotational instability (MRI) becomes stable. Unlike the standard MRI mode, which is concentrated in the high flow shear region, these distinct global modes (with low azimuthal mode numbers) are extended in the global domain and are Alfvén-continuum-driven unstable modes. As its mode structure and relative dominance over MRI are inherently determined by the global spatial curvature as well as the flow shear in the presence of a magnetic field, we call it the magneto-curvature (magneto-spatial-curvature) instability. Consistent with the linear analysis, as the field strength is increased in the nonlinear simulations, a transition from MRI-driven turbulence to a state dominated by global nonaxisymmetric modes is obtained. This global instability could therefore be a source of nonlinear transport in accretion disks at a higher magnetic field than predicted by local models.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1987

Solar dynamic organic Rankine cycle heat rejection system simulation

The use of a rotary fluid management device (RFMD) and shear flow condenser for two-phase fluid management in microgravity organic Rankine cycle (ORC) applications is examined. A prototype of the proposed Space Station ORC heat rejection system was constructed to evaluate the performance of the inventory control method. The design and operation of the RFMD, shear flow condenser, and inventory control fluid accumulator are described. A schematic diagram of the ORC, RFMD, and condenser, and a functional diagram of the heat rejection system for the ORC are presented.

Havens, V. N.↗
NASA NTRS1981

Coherent structures in turbulence

A technique is proposed for calculating organized structures in turbulent shear flows. The proposed approach is based on a homogeneous function decomposition and involves representation of a random function as a series of coherent structures occurring at stochastic locations with stochastic strengths. Attention is given to the retrieval of phase information and information on overlap and spacing, nearly parallel shear flows, dynamical equations, and applications to measurements.

Lumley, J. L.↗
NASA NTRS1994

The Roles of Large- and Small-Scale Structures in Turbulent Free Shear Layers

The occurrence of large-scale coherent structures in turbulent free shear flows (especially the planar mixing layer) has been recognized for some time. Indeed, the observation of such structures in mixing layers did much to promote interest in the study of coherent structures in turbulence. It has been widely assumed that the large-scale structures in these flows are responsible for the entrainment of free-stream fluid and the overall growth of the layer, while the small-scale structures provide mixing and dissipation. A model of scalar mixing based on these ideas was proposed for these flows. However, recent experimental and computational evidence suggests that the dominance of the large-scale structures in turbulent mixing layers is not universal. In addition, there is a substantial variation among experiments in several statistical measures of self-similar mixing layers, for example growth rate and velocity variances. To investigate the importance of large-scale structures, several free shear flows (mixing layers and wakes) have been simulated via direct numerical simulation. The simulations are designed to mimic experimental mixing layers in which the splitter plate boundary layers are turbulent. Different levels of two-dimensional forcing are included resulting in large-scale structures of differing strength and importance. These simulations are used to investigate the role of large-scale coherent structures in free shear layers and the effect of these structures on relevant turbulence statistics and scalar mixing. It is found that the statistics and structures in several experiments involving turbulent mixing layers are in better agreement with simulations that do not exhibit dominant large-scale structures than those in which the common mixing layer structures do dominate. It is also found that the level of forcing can have a profound effect on the qualitative and quantitative features of these shear layer, even when they are nominally self-similar.

Moser, Robert D.↗
NASA NTRS1988

The stimulation of arachidonic acid metabolism in human platelets by hydrodynamic stresses

The effects of stimulating human platelets by thrombin and by hydrodynamic stresses on the platelets' arachidonic acid metabolism were investigated using (1-C-14)-arachidonic acid label and a specially designed viscometer that ensured laminar shear flow with a nearly uniform shear rate throughout the flow region. It was found that platelets activated by thrombin formed principally thromboxane A2, 12-hydroxy 5,8,10-heptadecatrienoic acid and 12-hydroxy 5,8,10,14-eicosatetraenoic acid (12-HETE). On the other hand, platelets activated by shear, formed only 12-HETE (although arachidonic acid metabolism was stimulated); no cyclooxygenase metabolites were detected. Results indicate that platelets may greatly increase their 12-HETE production when activated by passage through a high-stress region of the circulation, such as an atherosclerotic stenosis.

Rajagopalan, Sridhar↗