Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “shadows”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27
All sourcesNASA NTRSDOE OSTI
NASA NTRS1988

Fade measurements at L-band and UHF in mountainous terrain for land mobile satellite systems

Fading results related to land mobile satellite communications at L-band (1502 MHz) and UHF (870 MHz) are described. These results were derived from an experiment performed in a series of canyon passes in the Boulder, Colorado region of the US. The experimental configuration involved a helicopter as the source platform, which maintained a relatively fixed geometry with a mobile van containing the receiver and data-acquisition system. An unobstructed line of sight between the radiating sources and the receiving van was, for the most part, also maintained. In this configuration, the dominant mechanism causing signal fading (or enhancement) is a result of multipath. The resulting fade distributions demonstrated that at the 1 percent and 5 percent levels, 5.5- and 2.6-dB fades were on the average exceeded at L-band and 4.8- and 2.4-dB at UHF, respectively, for a path elevation angle of 45 deg. The canyon results as compared with previous roadside-tree-shadowing results demonstrate that the deciding factor dictating fade margin for future land mobile satellite systems is tree shadowing rather than fades caused by multipath.

Vogel, Wolfhard J.↗
NASA NTRS1987

Magnetic activity complexes, thermal relaxation oscillations, and the dynamics of the azimuthal magnetic field of a star

The large amount of magnetic flux cycling through an activity complex in a period of six months suggests that the azimuthal magnetic field in the convective zone of the sun is not less than 3000 Gauss and probably is considerably more. A field of 3 kiloGauss or more has the effect of blocking the convective heat transport, producing a cool shadow above the azimuthal field and causing heat to accumulate below. The incremental weight of the cool shadow is sufficient to overpower the magnetic buoyancy, pressing the field against the bottom of the convective zone. The accumulation of heat underneath produces a thermal relaxation oscillation that erupts to the surface at intervals of the order of a week, supplying the intermittent emergence of magnetic flux observed in the activity complex.

Parker, E. N.↗
NASA NTRS1987

A statistical study of ion pitch-angle distributions

Preliminary results of a statistical study of energetic (34-50 keV) ion pitch-angle distributions (PADs) within 9 Re of earth provide evidence for an orderly pattern consistent with both drift-shell splitting and magnetopause shadowing. Normal ion PADs dominate the dayside and inner magnetosphere. Butterfly PADs typically occur in a narrow belt stretching from dusk to dawn through midnight, where they approach within 6 Re of earth. While those ion butterfly PADs that typically occur on closed drift paths are mainly caused by drift-shell splitting, there is also evidence for magnetopause shadowing in observations of more frequent butterfly PAD occurrence in the outer magnetosphere near dawn than dusk. Isotropic and gradient boundary PADs terminate the tailward extent of the butterfly ion PAD belt.

Sibeck, D. G.↗
NASA NTRS1988

Interiors of the giant planets

This theoretical/observational project constrains interior structure of Jovian planets through observational data. Researchers continue to concentrate on Neptune in support of the 1989 Voyager encounter. Occultations of stars by Neptune are observed from the Tucson area and from Chile to obtain information about Neptune's atmosphere and to continue to search for Neptune arcs. Occultations by other solar system objects are also observed as part of collaborative efforts from time to time. New results on the structure of scintillations in the central flash occultation by Neptune on 20 August 1985 were derived. Analysis shows that scintillations are present throughout the lightcurve, both near the half-intensity points (at a pressure of 1 microbar) and near the central flash (at 0.4 mbar). Near the planetary limb, the scintillations are extended parallel to the limb; near the shadow center, they are extended parallel to the limb; near the shadow center, they are extended in a radial direction. Researchers collaborated with Ramesh Narayan to derive a theory relating the scintillations to density fluctuations in Neptune's atmosphere. The theory will ultimately enable researchers to test whether the scintillations are caused by internal gravity waves in Neptune's upper atmosphere.

Hubbard, W. B.↗
NASA NTRS1989

A study of three techniques used in the diffraction analysis of shaped dual-reflector antennas

An examination is presented of three techniques used for the efficient computation of fields diffracted by a subreflector that has been shaped by geometrical optics synthesis. It is found that these techniques, which are based on the geometrical theory of diffraction (GTD), produce errors in the computed fields that are specific to shaped reflectors. These errors are examined for a reflector system shaped to produce maximum gain from a tapered feed illumination. The discrepancies are directly related to the caustic being located near an observation point of the GTD calculations. The errors found are localized, and they increase in magnitude as the caustic approaches the main reflector. In a general offset geometry, the location of the caustic may be located arbitrarily close to the main reflector given a prescribed output aperture distribution. For the specific case considered here-the common situation of shaping to produce maximum gain-the caustic is located near the edge of the main reflector and on the reflection shadow boundary. A local correction is derived which creates a uniform solution through the caustic and across the reflection shadow boundary. Away from this point the calculation receeds to the standard GTD solution.

Cwik, Tom A.↗
NASA NTRS1990

Thermal Radiation Analysis System (TRASYS II)

Program solves thermal heating problems such as effect of sunlight on satellite. Surface geometry features include complete shadowing ability, including shadowing by semi-transparent surfaces. Written for DEC VAX.

Vogt, R. A.↗
NASA NTRS1989

A case study of wave-current interaction near an oceanic front

High resolution directional wave spectrum data were obtained from two NASA airborne radars during the Frontal Air-Sea Interaction Experiment in February 1986. The observations show a significant change in the wave number spectrum across the front. On the basis of surveys from a towed sensor and on satellite imagery, the front location and current field are estimated. A numerical model is developed for the wave-current interaction and is used to model the wave refraction across the frontal current. A parametric study is performed to demonstrate the effects of current meandering. The main consequence of meandering is the formation of caustics and shadow zone regions in which the wave energy is significantly enhanced or reduced. Spectral simulation along the aircraft track reveals a reduction of more that 60 percent in wave energy in the shadow zone; this is consistent with the observations.

Liu, A. K.↗
NASA NTRS1990

Drag on the Lageos satellite

The drag data on the Lageos satellite collected between 1976 and 1987 are analyzed, and the cause of fluctuations observed at times when the orbit intersects the earth's shadow is investigated. The average drag on the Lageos consists of three types of drag: the Yarkovsky thermal drag, which accounts for about 70 percent of the observed drag; the neutral particle drug, accounting for about 14 percent of the drag for a hydrogen number density of 5 x 10 to the 9th/cu m; and the charged particle drag, which accounts for 12 percent of average drag at a number density of 3 x 10 to the 9th and a temperature of 5000 K in the plasmasphere for a satellite potential of -1 V. The observed drag agrees with the particle environment at the Lageos altitude and the drag models. However, the fluctuations in Lageos's along-track acceleration when the orbit intersects the earth's shadow are still not well understood.

Rubincam, David Parry↗
NASA NTRS1990

Thermal analysis of a strongback structure for a high-frequency microwave antenna concept in geosynchronous orbit

The effects of the geosynchronous thermal environment on the performance of a tetrahedral truss strongback structure for a high-frequency microwave antenna concept for earth science monitoring have been studied. Two orbit conditions (an equinox orbit with a 72-minute eclipse and a solstice orbit with no eclipse) and a range of thermal control approaches were investigated under steady state and transient conditions. The thermal control approaches included aluminum surface coatings with high and low solar-absorptivity-to-infrared-emissivity ratios, multi-layer insulation, a sun shield, and various truss element materials. The effects of both earth shadowing and shadowing by the antenna reflector on temperatures were also examined. Temperatures and corresponding structural distortion results are presented.

Farmer, Jeffery T.↗
NASA NTRS1991

Integration of SAR and DEM data: Geometrical considerations

General principles for integrating data from different sources are derived from the experience of registration of SAR images with digital elevation models (DEM) data. The integration consists of establishing geometrical relations between the data sets that allow us to accumulate information from both data sets for any given object point (e.g., elevation, slope, backscatter of ground cover, etc.). Since the geometries of the two data are completely different they cannot be compared on a pixel by pixel basis. The presented approach detects instances of higher level features in both data sets independently and performs the matching at the high level. Besides the efficiency of this general strategy it further allows the integration of additional knowledge sources: world knowledge and sensor characteristics are also useful sources of information. The SAR features layover and shadow can be detected easily in SAR images. An analytical method to find such regions also in a DEM needs in addition the parameters of the flight path of the SAR sensor and the range projection model. The generation of the SAR layover and shadow maps is summarized and new extensions to this method are proposed.

Kropatsch, Walter G.↗
NASA NTRS1990

Distorted-wave born approximation calculations for turbulence scattering in an upward-refracting atmosphere

Weiner and Keast observed that in an upward-refracting atmosphere, the relative sound pressure level versus range follows a characteristic 'step' function. The observed step function has recently been predicted qualitatively and quantitatively by including the effects of small-scale turbulence in a parabolic equation (PE) calculation. (Gilbert et al., J. Acoust. Soc. Am. 87, 2428-2437 (1990)). The PE results to single-scattering calculations based on the distorted-wave Born approximation (DWBA) are compared. The purpose is to obtain a better understanding of the physical mechanisms that produce the step-function. The PE calculations and DWBA calculations are compared to each other and to the data of Weiner and Keast for upwind propagation (strong upward refraction) and crosswind propagation (weak upward refraction) at frequencies of 424 Hz and 848 Hz. The DWBA calculations, which include only single scattering from turbulence, agree with the PE calculations and with the data in all cases except for upwind propagation at 848 Hz. Consequently, it appears that in all cases except one, the observed step function can be understood in terms of single scattering from an upward-refracted 'skywave' into the refractive shadow zone. For upwind propagation at 848 Hz, the DWBA calculation gives levels in the shadow zone that are much below both the PE and the data.

Gilbert, Kenneth E.↗
NASA NTRS1991

Lighting constraints on lunar surface operations

An investigation into the levels of ambient lighting on the lunar surface indicates that for most nearside locations, illumination will be adequate throughout most of the lunar night to conduct EVAs with only minor artificial illumination. The maximum lighting available during the lunar night from Earthshine will be similar to the light level on a July evening at approximately 8:00 pm in the southern United States (approximately 15 minutes after sunset). Because of the captured rotation of the Moon about the Earth, the location of the Earth will remain approximately constant throughout the lunar night, with consequent constant shadow length and angle. Variations in the level of Earthside illumination will be solely a function of Earth phase angle. Experience during the Apollo Program suggests that EVA activities during the period around the lunar noon may be difficult due to lack of surface definition caused by elimination of shadows.

Eppler, Dean B.↗
NASA NTRS1990

Flight test of ARINC 741 configuration low gain SATCOM system on Boeing 747-400 aircraft

The Boeing company conducted a flight test of a SATCOM system similar to the ARINC 741 configuration on a production model 747-400. A flight plan was specifically designed to test the system over a wide variety of satellite elevations and aircraft attitudes as well as over land and sea. Interface bit errors, signal quality and aircraft position and navigational inputs were all recorded as a function of time. Special aircraft maneuvers were performed to demonstrate the potential for shadowing by aircraft structures. Both a compass rose test and the flight test indicated that shadowing from the tail is insignificant for the 747-400. However, satellite elevation angles below the aircraft horizon during banking maneuvers were shown to have a significant deleterious effect on SATCOM communications.

Murphy, Timothy A.↗
NASA NTRS1992

Patterns of discoloration and oxidation by direct and scattered fluxes on LDEF, including oxygen on silicon

A number of interesting discoloration patterns are clearly evident on MOOO2-1 which resides on the three faces of the Long Duration Exposure Facility (LDEF). Most interesting is the pattern of blue oxidation on polished single crystal silicon apparently produced by scattered or direct ram oxygen atoms along the earth face. A complete explanation for the patterns has not yet been obtained. All honeycomb outgassing holes have a small discoloration ring around them that varies in color. The shadow cast by a suspended wire on the earth face surface is not easily explained by either solar photons or by ram flux. The shadows and the dark/light regions cannot be explained consistently by the process of solar ultraviolet paint-darkening modulated by ram flux oxygen bleaching of the paint.

Frederickson, A. R.↗
NASA NTRS1992

LDEF microenvironments, observed and predicted

Complex protrusions and surface indentations on spacecraft equipment alter exposure environments by casting shadows, producing reflections and scattering incident atomic oxygen flux and UV radiation. A computer model is being developed to predict these effects. The model accounts for any arbitrary shape, size, orientation, or curvature of exposed objects. LDEF offers a unique opportunity to compare model prediction with observations. For this purpose, a study is underway on twelve of LDEF's copper grounding straps. These straps were exposed at various angles from the ram vector during the LDEF flight. Microenvironment variables include shadowing and reflections from clamps and fasteners, and varying exposure caused by bending of the straps. Strap measurements include optical properties, surface film composition by ESCA, and film thickness measurements by optical interference techniques. The features of the microenvironment model and the analytical methods used to examine the straps are discussed. Data are presented showing predicted microenvironmental variations. These variations are compared with observed point to point differences in surface properties of the straps.

Bourassa, R. J.↗
NASA NTRS1992

Solar radiation on a catenary collector

A tent-shaped structure with a flexible photovoltaic blanket acting as a catenary collector is presented. The shadow cast by one side of the collector produces a shadow on the other side of the collector. This self-shading effect is analyzed. The direct beam, the diffuse, and the albedo radiation on the collector are determined. An example is given for the insolation on the collector operating on Viking Lander 1 (VL1).

Crutchik, M.↗
NASA NTRS1992

L- and K-band LMSS propagation measurements using MARECS-B, OLYMPUS, and ACTS

L-band measurements of land mobile satellite systems (LMSS) propagation effects were last made at the end of 1988, but some voids were left in the database, making modeling of low elevation roadside tree shadowing and multipath reflections difficult for some path geometries. Transmission of a pilot tone from MARECS-B at 55 deg West during Sep. and Dec. 1991 gave an opportunity to fill the gaps in the experimental results. Two campaigns during which fade data were obtained at elevation angles from 7 deg to 40 deg are described. Below 15 deg, specular terrain reflections in a non-shadowing, hilly environment were observed to introduce significant fading. Although the reflecting surface was at a distance of up to several km, it is shown that the reflected signals are delayed by less than 1 microsec. Mobile measurements were also attempted receiving the 20 GHz Olympus beacon, but antenna pointing problems restricted first results to straight-line driving.

Vogel, W. J.↗
NASA NTRS1993

Efficient development and processing of thermal math models of very large space truss structures

As the spacecraft moves along the orbit, the truss members are subjected to direct and reflected solar, albedo and planetary infra-red (IR) heating rates, as well as IR heating and shadowing from other spacecraft components. This is a transient process with continuously changing heating loads and the shadowing effects. The resulting nonuniform temperature distribution may cause nonuniform thermal expansion, deflection and stress in the truss elements, truss warping and thermal distortions. There are three challenges in the thermal-structural analysis of the large truss structures. The first is the development of the thermal and structural math models, the second - model processing, and the third - the data transfer between the models. All three tasks require considerable time and computer resources to be done because of a very large number of components involved. To address these challenges a series of techniques of automated thermal math modeling and efficient processing of very large space truss structures were developed. In the process the finite element and finite difference methods are interfaced. A very substantial reduction of the quantity of computations was achieved while assuring a desired accuracy of the results. The techniques are illustrated on the thermal analysis of a segment of the Space Station main truss.

Warren, Andrew H.↗