Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “sequential”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27
All sourcesNASA NTRSDOE OSTI
NASA NTRS1978

Perseveration effects in detection tasks with correlated decision intervals

An investigation of the behavior of the human decisionmaker is described for a task related to the problem of a pilot using a traffic situation display to avoid collisions. This sequential signal detection task is characterized by highly correlated signals with time varying strength. Experimental results are presented and the behavior of the observers is analyzed using the theory of Markov processes and classical signal detection theory. Mathematical models are developed which describe the main result of the experiment: that correlation in sequential signals induced perseveration in the observer response and a strong tendency to repeat their previous decision, even when they were wrong.

Gai, E. G.↗
NASA NTRS1978

Shuttle GPS R/PA evaluation analysis and performance tradeoff study

Primary responsibility was understanding and analyzing the various GPS receiver functions as they relate to the shuttle environment. These receiver functions included acquisition properties of the sequential detector, acquisition and tracking properties of the various receiver phase locked loops, and the techniques of sequential receiver operation. In addition to these areas, support was provided in the areas of oscillator stability requirements, antenna management, and navigation filter requirements, including preposition aiding.

Booth, R. W. D.↗
NASA NTRS1978

Reliability growth/burn-in - The allocation of testing resources

A sequential component test procedure is proposed. It is assumed that there is some knowledge of the initial failure rate parameter of each component. This knowledge is modified by the results of the first one or two tests. The remaining component test time is allocated adaptively (sequentially) to the components so as to maximize the system MTBF. In other words, the components will compete among themselves for limited test resources.

Truelove, A. J.↗
NASA NTRS1979

The decay of the 1973 August 9 flare

The state and evolution of the decay-phase plasma from a compact solar flare that occurred on August 9, 1973, are investigated on the basis of XUV and X-ray observations from Skylab and Solrad 9. Density-sensitive line ratios are used to determine the electron density over the temperature range from 30,000 to 5 million K, and the differential emission measure in the temperature interval from 30,000 to 20 million K is derived for several times in the decay phase. The morphology of the flare is discussed, including its relation to the observed photospheric magnetic field. The sequential formation of new loops during the decay phase is emphasized as an essential element for understanding the decay phase of the flare. This idea is developed further by comparing the observed differential emission measure with that predicted by a semiempirical model which considers the sequential formation of isothermal loops that cool by radiation and thermal conduction.

Dere, K. P.↗
NASA NTRS1978

Carbon, nitrogen and sulfur in Apollo 15, 16 and 17 rocks

Carbon, nitrogen and sulfur contents, as well as carbon isotopic compositions, were determined for seven lunar rocks from the Apollo 15, 16 and 17 missions. Sequential combustion at three temperatures was used to resolve terrestrial contamination from indigenous lunar volatiles. Nitrogen abundances averaged 0.4 micrograms/gram in the samples. The results of the sequential combustion analysis suggested that all the samples contained variable amounts of terrestrial carbon contamination prior to examination. Indigenous lunar carbon abundances ranging from 2.5 to 6 micrograms/gram were found. Thus the moon appears to be substantially depleted in nitrogen and carbon relative to the earth and C and H meteorites.

Des Marais, D. J.↗
NASA NTRS1981

Four-quadrant CCD analog multiplier

Sequential processing technique improves accuracy when CCD-array signals are multiplied by weighting function to remove offsets. System uses two schemes to cancel undesired output contributions arising from prerequisite biases. First is spontaneous cancellation by multiple "nominally identical" devices; second is sequential cancellation where same devices are used repeatedly to form multiple products. Single device then successively subtracts products, eliminating effects of MOS-array threshold nonuniformities.

Brooks, C. W.↗
NASA NTRS1979

The SIRIO-1 timing experiment

A time synchronization experiment was performed between two ground stations located in the northern and in the central part of Italy. The rf communication channels used are in the SHF region, with the uplink carrier at 18 GHz and the downlink at 12 GHz. One way and two way techniques were evaluated. Two modes of operation were tested in the two way technique: sequential, time multiplexed, signal transmission on the same communication channel; and simultaneous transmission using separate communication channel. In the sequential mode of operation, range and doppler measurements provided by the timing signals were used to account for the satellite motion. A low cost, versatile, time transfer unit (TTU) was designed, to generate the timing signals and the functions (RF carrier and receiver switching, time tagging of the data, etc.) required to perform automatic time synchronization and data acquisition with a minimum of external components.

Detoma, E.↗
NASA NTRS1980

Water-ice and water-updraft relationships near -10 C within populations of Florida cumuli

Evidence is presented for a sequential development of cloud water, rainwater, graupel, and crystalline ice with the aging of the cloud. This evidence is based on in-cloud microphysical data set collected in Florida convective towers that were penetrated close to their tops near -10 C; the very rapid onset of graupel that appears on repeat penetrations of some towers is of particular interest. A separate data set shows a large scatter in the relationship between the maximum value of cloud water and vertical velocity which indicates that measurements of cloud water can be misleading as an indication of growth activity. The sequential pass data showing the evolution of ice and water are consistent with a rime-splintering, secondary ice production hypothesis.

Sax, R. I.↗
NASA NTRS1981

Decommutator patchboard verifier

A system for automatically verifying the connections between terminals of a patchboard is described. The system includes a back plane having a plurality of plugs corresponding to the pins of the patchboard. A number of decoders are connected to the plugs of the back plane so that a signal can be sequentially applied to each plug of the back plane under control of a stepping register and a control circuit. A plurality of data selectors are also connected to the plugs of the back plane and under control of a second external register. This control circuit sequentially makes connections between an output circuit and the plugs of the back plane so as to patch the signal applied to a respective plug through a patch connection to the output circuit. The precise locations of the patches on the patchboard can be identified and compared with previously stored information in a memory unit.

Brunson, J. W.↗
NASA NTRS1981

High-speed multiplexing of keyboard data inputs

A high speed multiplexing system is described in which keyboard entered data is sequentially and automatically sampled by the multiplexing system for input to a computer. A sequencer is provided which sequentially and automatically controls the multiplexer to sample each keyboard input in accordance with a predetermined sampling sequence. Whenever keyboard entered data appears on input lines to the multiplexer, the system inputs the keyboard data to the computer during a brief time interval in which the multiplexer remains at the particular keyboard address or port. Thus, a high speed sampling circuit is provided whereby the only operator action required is data entry through a keyboard. Priority or interrupt systems are not required.

Anderson, T. O.↗
NASA NTRS1981

Autonomous attitude determination from star data for a dual-spin planetary spacecraft

A batch mode process which identifies three reference stars within a rotor-mounted star scanner's field-of-view based on the criteria of intensity and geometry was established. The sequential mode which continuously tracks the reference stars provides star transit times and estimates of rotor's spin rate. A least-square estimator was formulated which sequentially determines the spacecraft attitude from sucessive star crossings by minimizing the error in the star and scanner slit normal orthogonality. This spacecraft attitude also provides intermittent updates for the gyro propagated inertial attitude of the despun science platform. Simulation results are presented, showing successful star identification and attitude convergence in the presence of nutation and star transit time uncertainty.

Wong, E. C.↗
NASA NTRS1981

Test apparatus for locating shorts during assembly of electrical buses

A test apparatus is described for locating electrical shorts that is especially suited for use while an electrical circuit is being fabricated or assembled. A ring counter derives input pulses from a square wave oscillator. The outputs of the counter are fed through transistors to an array of light emitting diodes. Each diode is connected to an electrical conductor, such as a bus bar, that is to be tested. In the absence of a short between the electrical conductors the diodes are sequentially illuminated. When a short occurs, a comparator/multivibrator circuit triggers an alarm and stops the oscillator and the sequential energization of the diodes. The two diodes that remain illuminated identify the electrical conductors that are shorted.

Deboo, G. J.↗
NASA NTRS1981

Evaluation of the procedure 1A component of the 1980 US/Canada wheat and barley exploratory experiment

Several techniques which use clusters generated by a new clustering algorithm, CLASSY, are proposed as alternatives to random sampling to obtain greater precision in crop proportion estimation: (1) Proportional Allocation/relative count estimator (PA/RCE) uses proportional allocation of dots to clusters on the basis of cluster size and a relative count cluster level estimate; (2) Proportional Allocation/Bayes Estimator (PA/BE) uses proportional allocation of dots to clusters and a Bayesian cluster-level estimate; and (3) Bayes Sequential Allocation/Bayesian Estimator (BSA/BE) uses sequential allocation of dots to clusters and a Bayesian cluster level estimate. Clustering in an effective method in making proportion estimates. It is estimated that, to obtain the same precision with random sampling as obtained by the proportional sampling of 50 dots with an unbiased estimator, samples of 85 or 166 would need to be taken if dot sets with AI labels (integrated procedure) or ground truth labels, respectively were input. Dot reallocation provides dot sets that are unbiased. It is recommended that these proportion estimation techniques are maintained, particularly the PA/BE because it provides the greatest precision.

Chapman, G. M.↗
NASA NTRS1982

Comparative evaluation of three shaft seals proposed for high performance turbomachinery

Experimental pressure profiles and leak rate characteristics for three shaft seal prototype model configurations proposed for the space shuttle turbopump were assessed in the concentric and fully eccentric, to point of rub, positions without the effects of rotation. The parallel-cylindrical configuration has moderate to good stiffness with a higher leak rate. It represents a simple concept, but for practical reasons and possible increases in stability, all such seals should be conical-convergent. The three-stepdown-sequential, parallel-cylindrical seal is converging and represents good to possible high stiffness when fluid separation occurs, with a significant decrease in leak rate. Such seals can be very effective. The three-stepdown-sequential labyrinth seal of 33-teeth (i.e., 12-11-10 teeth from inlet to exit) provides excellent leak control but usually has very poor stiffness, depending on cavity design. The seal is complex and not recommended for dynamic control.

Hendricks, R. C.↗
NASA NTRS1981

Tri-state delta modulation system for Space Shuttle digital TV downlink

Future requirements for Shuttle Orbiter downlink communication may include transmission of digital video which, in addition to black and white, may also be either field-sequential or NTSC color format. The use of digitized video could provide for picture privacy at the expense of additional onboard hardware, together with an increased bandwidth due to the digitization process. A general objective for the Space Shuttle application is to develop a digitization technique that is compatible with data rates in the 20-30 Mbps range but still provides good quality pictures. This paper describes a tri-state delta modulation/demodulation (TSDM) technique which is a good compromise between implementation complexity and performance. The unique feature of TSDM is that it provides for efficient run-length encoding of constant-intensity segments of a TV picture. Axiomatix has developed a hardware implementation of a high-speed TSDM transmitter and receiver for black-and-white TV and field-sequential color. The hardware complexity of this TSDM implementation is summarized in the paper.

Udalov, S.↗
NASA NTRS1983

Sea ice motion measurements from Seasat SAR images

Data from the Seasat synthetic aperture radar (SAR) experiment are analyzed in order to determine the accuracy of this information for mapping the distribution of sea ice and its motion. Data from observations of sea ice in the Beaufort Sea from seven sequential orbits of the satellite were selected to study the capabilities and limitations of spaceborne radar application to sea-ice mapping. Results show that there is no difficulty in identifying homologue ice features on sequential radar images and the accuracy is entirely controlled by the accuracy of the orbit data and the geometric calibration of the sensor. Conventional radargrammetric methods are found to serve well for satellite radar ice mapping, while ground control points can be used to calibrate the ice location and motion measurements in the cases where orbit data and sensor calibration are lacking. The ice motion was determined to be approximately 6.4 + or - 0.5 km/day. In addition, the accuracy of pixel location was found over land areas. The use of one control point in 10,000 sq km produced an accuracy of about + or 150 m, while with a higher density of control points (7 in 1000 sq km) the location accuracy improves to the image resolution of + or - 25 m. This is found to be applicable for both optical and digital data.

Leberl, F.↗
NASA NTRS1983

A comparison of numerical results of Arctic Sea ice modeling with satellite images

Observations made from 1972 to 1976 with the Electrically Scanning Microwave Radiometer on board the Nimbus 5 Satellite provide sequential synoptic information of the Arctic sea ice cover. This 4 year data set was used to construct a fairly continuous series of 3 day average 19-GHz passive microwave images which has become a valuable source of polar information, yielding many anticipated and unanticipated discoveries of the sea ice canopy observed in its entirety through the clouds and during the polar night. Interpretation of the passive microwave satellite data set was performed by comparing selected sequential images with correspondin microwave profiles and images acquired by the NASA CV-990 airborne laboratory and with various in situ microwave and physical observations.

Ling, C. H.↗
NASA NTRS1983

Optimal trajectories for aeroassisted orbital transfer

Consideration is given to classical and minimax problems involved in aeroassisted transfer from high earth orbit (HEO) to low earth orbit (LEO). The transfer is restricted to coplanar operation, with trajectory control effected by means of lift modulation. The performance of the maneuver is indexed to the energy expenditure or, alternatively, the time integral of the heating rate. Firist-order optimality conditions are defined for the classical approach, as are a sequential gradient-restoration algorithm and a combined gradient-restoration algorithm. Minimization techniques are presented for the aeroassisted transfer energy consumption and time-delay integral of the heating rate, as well as minimization of the pressure. It is shown that the eigenvalues of the Jacobian matrix of the differential system is both stiff and unstable, implying that the sequential gradient restoration algorithm in its present version is unsuitable. A new method, involving a multipoint approach to the two-poing boundary value problem, is recommended.

Miele, A.↗