Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “root productivity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Numerical Validation of an Algorithm for Combined Soiling and Degradation Analysis of Photovoltaic Systems

We describe and demonstrate an open-source algorithm for simultaneously quantifying degradation and soiling of photovoltaic (PV) systems from energy-production time series data. The new analysis is based on year-on-year degradation rate analysis combined with stochastic rate and recovery soiling analysis. The algorithm is designed to fit into the workflow provided by RdTools, a Python module maintained by NREL and collaboratively developed with the community, which provides a framework and functions for degradation and loss-factor analysis of PV field data. We demonstrate the method on numerically simulated PV data sets and show that it reduces the root-mean-square error of the P50 degradation rate estimate when soiling is present.

14 SOLAR ENERGY↗
DOE OSTI2022

Extending water vapor measurement capability of photon-limited differential absorption lidars through simultaneous denoising and inversion

Abstract. The micropulse differential absorption lidar (MPD) was developed at Montana State University (MSU) and the National Center for Atmospheric Research (NCAR) to perform range-resolved water vapor (WV) measurements using low-power lasers and photon-counting detectors. The MPD has proven to produce accurate WV measurements up to 6 km altitude. However, the MPD's ability to produce accurate higher-altitude WV measurements is impeded by the current standard differential absorption lidar (DIAL) retrieval methods. These methods are built upon a fundamental methodology that algebraically solves for the WV using the MPD forward models and noisy observations, which exacerbates any random noise in the lidar observations. The work in this paper introduces the adapted Poisson total variation (PTV) specifically for the MPD instrument. PTV was originally developed for a ground-based high spectral resolution lidar, and this paper reports on the adaptations that were required in order to apply PTV on MPD WV observations. The adapted PTV method, coined PTV-MPD, extends the maximum altitude of the MPD from 6 to 8 km and substantially increases the accuracy of the WV retrievals starting above 2 km. PTV-MPD achieves the improvement by simultaneously denoising the MPD noisy observations and inferring the WV by separating the random noise from the non-random WV. An analysis with 130 radiosonde (RS) comparisons shows that the relative root-mean-square difference (RRMSE) of WV measurements between RS and PTV-MPD exceeds 100 % between 6 and 8 km, whereas the RRMSE between RS and the standard method exceeds 100 % near 3 km. In addition, we show that by employing PTV-MPD, the MPD is able to extend its useful range of WV estimates beyond that of the ARM Southern Great Plains Raman lidar (RRMSE exceeding 100 % between 3 and 4 km); the Raman lidar has a power-aperture product 500 times greater than that of the MPD.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Partial Least Squares, Experimental Design, and Near-Infrared Spectrophotometry for the Remote Quantification of Nitric Acid Concentration and Temperature

Near-infrared spectrophotometry and partial least squares regression (PLSR) were evaluated to create a pleasantly simple yet effective approach for measuring HNO3 concentration with varying temperature levels. A training set, which covered HNO3 concentrations (0.1–8 M) and temperature (10–40 °C), was selected using a D-optimal design to minimize the number of samples required in the calibration set for PLSR analysis. The top D-optimal-selected PLSR models had root mean squared error of prediction values of 1.4% for HNO 3 and 4.0% for temperature. The PLSR models built from spectra collected on static samples were validated against flow tests including HNO 3 concentration and temperature gradients to test abnormal conditions (e.g., bubbles) and the model performance between sample points in the factor space. Based on cross-validation and prediction modeling statistics, the designed near-infrared absorption approach can provide remote, quantitative analysis of HNO 3 concentration and temperature for production-oriented applications in facilities where laser safety challenges would inhibit the implementation of other optical techniques (e.g., Raman spectroscopy) and in which space, time, and/or resources are constrained. The experimental design approach effectively minimized the number of samples in the training set and maintained or improved PLSR model performance, which makes the described chemometric approach more amenable to nuclear field applications.

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2022

Cooling rate and dendrite spacing control in direct metal deposition printed Cu-Fe alloys

Over the last several decades, additive manufacturing (AM) has been primarily used for rapid prototyping or to create novel geometries that would be difficult or impossible to create by normal manufacturing methods. More recently, research has been focused on expanding the list of materials that can be made through additive manufacturing, opening a greater range of material properties for this manufacturing method. Due to the unusual conditions during AM, including the high cooling rates and voxel by voxel method of production, AM parts often have anisotropic material microstructures and properties. In this investigation, the laser power, composition, and nozzle head speed during direct metal deposition of copper-iron alloys was varied to understand how the grain structure within the printed parts could be changed and controlled. The resulting dendrite spacing was measured and compared to calculated cooling rates from Gaussian beams on flat plates under similar material and laser properties, which resulted in a cooling rate to dendrite spacing relationship following an inverse square root, as is found in other dendritic systems [Young and Kerkwood, Metall. Trans. A 6, 197–205 (1975)]. Thus, it is demonstrated that in the Cu-Fe system, dendrite spacing can be controlled through manipulation of printing parameters.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Representation of Leaf-to-Canopy Radiative Transfer Processes Improves Simulation of Far-Red Solar-Induced Chlorophyll Fluorescence in the Community Land Model Version 5

Recent advances in satellite observations of solar-induced chlorophyll fluorescence (SIF) provide a new opportunity to evaluate and constrain the simulation of terrestrial gross primary productivity (GPP). Accurate representation of the processes driving SIF emission and the radiative transfer of SIF to remote sensing sensors is an essential prerequisite for the evaluation and data assimilation. Recently, SIF simulations have been incorporated into several land surface models, but the scaling of SIF from leaf-level to canopy level is usually not well-represented. In this work, we incorporate the simulation of far-red SIF observed at nadir into the Community Land Model version 5 (CLM5). An efficient and accurate method based on escape probability is developed to scale SIF from leaf-level to top-of-canopy while taking clumping and the radiative transfer processes into account. SIF simulated by CLM5 and a canopy-level model agreed well at sites except one in needle leaf forest (R2>0.91, root-mean-square error < 0.19W m -2 sr -1 um -1 ), and captured the day-to-day variation of tower-measured SIF at temperate forest sites (R 2 >0.68). At the global scale, simulated SIF generally captured the spatial and seasonal pat37 terns of satellite-observed SIF (R2 > 0.76 except for tropical forest). Factors including the fluorescence emission model, clumping, bidirectional effect, and canopy properties (leaf optical properties and leaf area index) had considerable impacts on SIF simulation, and the discrepancies between simulated and observed SIF varied with plant functional type. By improving the representation of radiative transfer for SIF simulation, our model allows better comparisons between simulated and observed SIF towards constraining and evaluating GPP simulations.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2026

Hyaloscypha finlandica Metabolome Repository

This repository provides the curated data tables, manuscript figure and table exports, dependency records, and workflow scripts supporting an integrated comparative genomics and untargeted LC-MS/MS metabolomics analysis of Hyaloscypha finlandica strain PMI 746, a root-associated dark septate endophyte of poplar. The repository includes genome-mining summaries from antiSMASH, FunBGCeX, BGC-Prophet, and BiG-SCAPE; processed metabolomics inputs; metabolite annotation evidence; statistical outputs; and publication-facing figures and tables. Raw LC-MS/MS spectra, full genome/protein downloads, and large generated tool outputs are referenced through public archive/accession records and are not stored in Git.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2026

Differences in cluster and internal wake effects from mesoscale and large-eddy simulations off the US East Coast

Mesoscale simulations are increasingly used to estimate wake effects within and between large wind farms, despite limited validation for large-scale wake effects. This study evaluates the capabilities and limitations of mesoscale simulations in capturing wake-induced impacts on wind turbine power production through a direct comparison with large-domain large-eddy simulations (LESs) for three planned offshore wind farms under realistic atmospheric conditions and a range of atmospheric stabilities. We assess mesoscale performance in replicating wake characteristics behind single and multiple turbine clusters and quantify the resulting variability in mean turbine power. Results show that mesoscale Weather Research and Forecasting simulations with the Fitch wind farm parameterization capture key features of the velocity deficit downstream of both single and multiple wind farms, with mean root-mean-square errors near 5 % and good agreement with stability-driven wake behavior. However, in these simulations, the mesoscale Fitch parameterization underestimates power losses from internal wake effects, particularly when turbines align with the prevailing wind direction or under stable stratification. In these conditions, individual wakes persist and dominate downstream power deficits. The coarse resolution of the mesoscale simulations limits their ability to resolve individual wind turbine wakes that drive power fluctuations within wind farms. Nonetheless, mesoscale simulations can yield accurate estimates of combined wake losses from internal and cluster effects across some wind direction sectors, where errors in wake representation may cancel each other out. These findings underscore the strengths of mesoscale simulations for capturing broader wake patterns while highlighting their limitations for modeling turbine-level power losses. Future work should explore hybrid modeling approaches to capture both long-range cluster wake propagation and localized internal wake dynamics.

17 WIND ENERGY↗
DOE OSTI2026

Angular momentum of vacuum bubbles in a first-order phase transition

The formation of primordial black holes (PBHs) during a first-order phase transition (FOPT) in a dark sector has been of recent interest. A quantity that characterizes a black hole is its spin. We carry out the first step towards determining the spin of such PBHs, by calculating the spin of spherical false vacuum bubbles induced by cosmological perturbations. The angular momentum is given by the product of density and velocity perturbations. We carefully track the evolution of background quantities and calculate the transfer functions during the FOPT. We find that the dimensionless spin parameter s = J /(G N M 2 ) of false vacuum bubbles of mass M and angular momentum J , take a wide range of values from 𝒪(10 -5 ) to 𝒪(10) for FOPTs between 10 keV and 100 GeV and a dark sector that is 0.1 to 0.4 times cooler than the visible sector. We also find a scaling relation between the root-mean-square value of the spin, the FOPT time scale, the bubble wall velocity, and the dark sector-to-visible sector temperature ratio.

cosmological phase transitions↗
DOE OSTI2024

Belowground plant allocation regulates rice methane emissions from degraded peat soils

Carbon-rich peat soils have been drained and used extensively for agriculture throughout human history, leading to significant losses of their soil carbon. One solution for rewetting degraded peat is wet crop cultivation. Crops such as rice, which can grow in water-saturated conditions, could enable agricultural production to be maintained whilst reducing CO 2 and N 2 O emissions from peat. However, wet rice cultivation can release considerable methane (CH 4 ). Water table and soil management strategies may enhance rice yield and minimize CH 4 emissions, but they also influence plant biomass allocation strategies. It remains unclear how water and soil management influences rice allocation strategies and how changing plant allocation and associated traits, particularly belowground, influence CH 4 -related processes. We examined belowground biomass (BGB), aboveground biomass (AGB), belowground:aboveground ratio (BGB:ABG), and a range of root traits (root length, root diameter, root volume, root area, and specific root length) under different soil and water treatments; and evaluated plant trait linkages to CH 4 . Rice (Oryza sativa L.) was grown for six months in field mesocosms under high (saturated) or low water table treatments, and in either degraded peat soil or degraded peat covered with mineral soil. We found that BGB and BGB:AGB were lowest in water saturated conditions where mineral soil had been added to the peat, and highest in low-water table peat soils. Furthermore, CH 4 and BGB were positively related, with BGB explaining 60% of the variation in CH 4 but only under low water table conditions. Our results suggest that a mix of low water table and mineral soil addition could minimize belowground plant allocation in rice, which could further lower CH 4 likely because root-derived carbon is a key substrate for methanogenesis. Minimizing root allocation, in conjunction with water and soil management, could be explored as a strategy for lowering CH 4 emissions from wet rice cultivation in degraded peatlands.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Miscanthus: An Environmental Choice for Marginal Lands

Miscanthus x giganteus, or Giant Miscanthus, is a tall, perennial grass originally from Asia. It is considered a sterile hybrid that has been bred to not produce viable seeds. Instead, rhizomes are planted to establish the crop. Here, the rhizome is an underground modified stem mass that puts out shoots and roots supporting new growth each year. This perennial crop takes two to three years to reach maturity, but established stands can reach upwards of 12 ft. tall with a very thick canopy (Pyter, 2007). Miscanthus has shown potential for high dry matter yields compared to other biomass crops, which could in turn lead to more efficient land use especially when applied to a bioenergy and bioproduct supply chain. In one study, switchgrass (Panicum virgatum) yielded 10.3 Mg/ha of biomass on average, while miscanthus yielded 22.4 Mg/ha (Heaton et al., 2004). Additionally, miscanthus production has been associated with many environmental benefits, including benefits to water quality, nutrient load removal, soil stabilization, and soil health (Bhardwaj et al., 2011; Hussain et al., 2019). Many of the possible practical and environmental benefits that are associated with miscanthus production may be attractive to stakeholders who are interested in alternative land use options, particularly in areas considered to be marginal in productivity.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

A biosynthetic gene cluster for three post-chorismate pathways in Arabidopsis

Chorismate is a branch-point metabolite in the biosynthesis of aromatic amino acids, vitamins, antibiotics and various other aromatic products in bacteria, fungi and plants. Although 13 chorismate-utilizing enzymes have been identified in bacteria, only 6 have been described in plants, where an estimated 30% of all photosynthetically fixed carbon passes through chorismate. Here, in this study, we describe a biosynthetic gene cluster (BGC) consisting of five core genes, including two reductases, two methyltransferases and one glucosyltransferase. Genetic and biochemical evidence shows that these five enzymes collectively give rise to three biosynthetic pathways, each originating from chorismate: two parallel pathways produce a class of non-aromatic, isomeric compounds abundant in the roots of Arabidopsis thaliana, whereas the third pathway produces methylated and glucosylated chorismate derivatives that subsequently react non-enzymatically with glutathione. Genome analysis revealed that variants of this BGC are present in some but not all species in the Brassicaceae family. Taken together, our study uncovered a BGC, containing three chorismate-utilizing enzymes, that controls three distinct post-chorismate pathways in A. thaliana. This work not only advances our understanding of carbon flow in this model plant but also highlights that the biochemical complexity encoded by plant BGCs is greater than previously appreciated.

Peng, Meng [Ghent Univ. (Belgium); Flemish Institu↗
DOE OSTI2026

Making an s1G Self-Preserving Environmental DNA (eDNA) Filter from Sustainable Materials

Environmental DNA (eDNA) sampling of aquatic environments is a powerful new tool for resource managers to use in detecting the presence of rare and endangered species. The use of eDNA for species detection is quickly becoming an industry-standard methodology in environmental science, and the technology sector is moving quickly to create purpose-built tools for eDNA sampling. Smith-Root, Inc. pioneered the new technology of self-preserving eDNA filters that automatically preserve the DNA captured on filters by desiccating the internal filter membrane. This capability saves the sampling technician significant time in the field and drastically reduces the potential for sample contamination. One main constraint of this new technology, however, is the necessity of single-use plastics for eDNA sampling. Single-use designs are employed because sampling equipment must be devoid of potential contaminating DNA, and the time required to sterilize equipment is often not cost-effective for practitioners. Thus, this technology is creating a significant new source of plastic waste—something that eDNA practitioners, and society, would like to avoid. This project explores the use of alternative bio based polymers and composites as replacements for incumbent industrial standards for eDNA filtration systems, with an emphasis on ease of processing and biodegradable options. 8 candidate materials, 3 for the top filter housing and 5 for the bottom filter housing, were investigated to replace incumbent housing materials. Of the 8 candidates, 2 materials were identified for future investigation which met performance requirements, were bio-based and could potentially offer better disposal options like soil degradation or composting, features sought by the customers of these products. The top housing candidate, material 1, has comparable performance to the incumbent material and equally manufacturable. The bottom housing candidate, material 6, improved desiccation performance by 81% after 1 hour in comparison to the incumbent material, is 100% bio-based, compostable and can be sourced domestically throughout the U.S.A.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Morphophysiological Plant Phenotyping for the Development of Plant Breeding Under Drought and Heat Conditions: A Practical Approach

ABSTRACT Currently, the breeding programs focus their efforts on identifying and developing tolerant genotypes to adverse conditions, such as drought and high temperatures. In this context, the physiological approach, which involves phenotyping several traits, is useful for breeding programs. Leaf photosynthetic traits have become one of the main objectives to be evaluated for breeders due to their relationship with improving grain yield and biomass production. Gas exchange ( Ge ) and chlorophyll “a” fluorescence ( Chf ) are the main tools to characterize the photosynthetic activity in real time at the leaf level. Consequently, several association studies using proximal and nonproximal sensing (e.g., RGB, thermography) have been developed. However, for the correct application of this breeding approach, it is essential to have a basic knowledge of both the physiological principles involved in the readings and the limitations of phenotyping due to the characteristics of the devices available on the market. This revision also covers other traits, such as the morphological and anatomical characteristics of leaves and roots, and the use of isotopes complementing Ge and Chf measurements.

Estrada, Félix [Instituto de Investigaciones Agrop↗
DOE OSTI2025

Variation in Flooding Tolerance in Populus deltoides ‘D-124’ and P. trichocarpa x P. deltoides Hybrid ‘52–225’

Flooding poses a substantial challenge to plant survival and productivity, particularly in riparian genus like Populus. This study examines the physiological, morphological, metabolic, and molecular responses of Populus deltoides ‘D-124’ and P. trichocarpa x P. deltoides hybrid clone ‘52–225’ under control and inundated conditions to identify differences in flooding tolerance. Under flooding conditions, physiological and cellular stress was more pronounced in P. deltoides ‘D-124’ than in the hybrid clone ‘52–225,’ as evidenced by lower transpiration (E), photosynthesis (A), and chlorophyll content. In contrast, ‘52–225’ showed reduced ROS accumulation suggesting better cellular function under stress. Morphologically, ‘52–225’ produced more shoot-born roots, which likely enhance oxygen transport and metabolic activity during flooding. Metabolite profiling revealed both overlapping and distinct patterns of sugar and amino acid accumulation between genotypes. Gene expression analysis revealed that flooding-responsive genes, including ALCOHOL DEHYDROGENASE 1 and HYPOXIA RESPONSIVE ERF 2, were activated in both genotypes, with a more pronounced response noted in ‘52–225.’ These findings extend our understanding of flooding tolerance mechanisms in Populus by connecting physiological traits, stress responses, and genetic regulation. This research contributes to the development of more flooding-resilient poplar varieties, with potential applications in breeding and restoration programs for flooding-prone environments.

Flooding stress↗
DOE OSTI2021

Scale setting the Möbius domain wall fermion on gradient-flowed HISQ action using the omega baryon mass and the gradient-flow scales 𝑡 0 and 𝑤 0

We report on a subpercent scale determination using the omega baryon mass and gradient-flow methods. The calculations are performed on 22 ensembles of 𝑁 𝑓 =2 +1 +1 highly improved, rooted staggered sea-quark configurations generated by the MILC and CalLat Collaborations. The valence quark action used is Möbius domain wall fermions solved on these configurations after a gradient-flow smearing is applied with a flowtime of 𝑡 gf = 1 in lattice units. The ensembles span four lattice spacings in the range 0.06 ≲ 𝑎 ≲0.15 fm, six pion masses in the range 130 ≲ 𝑚 𝜋 ≲ 400 MeV and multiple lattice volumes. On each ensemble, the gradient-flow scales 𝑡 0 /𝑎 2 and 𝑤 0 /𝑎 and the omega baryon mass 𝑎⁢𝑚 Ω are computed. The dimensionless product of these quantities is then extrapolated to the continuum and infinite volume limits and interpolated to the physical light, strange and charm quark mass point in the isospin limit, resulting in the determination of $\sqrt{t}_0$ = 0.1422⁢(14) fm and 𝑤 0 = 0.1709⁢(11) fm with all sources of statistical and systematic uncertainty accounted for. The dominant uncertainty in both results is the stochastic uncertainty, though for $\sqrt{t}_0$ there are comparable continuum extrapolation uncertainties. For 𝑤 0 , there is a clear path for a few-per-mille uncertainty just through improved stochastic precision, as recently obtained by the Budapest-Marseille-Wuppertal Collaboration.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2026

Multi‐season analysis reveals hundreds of drought‐responsive genes in sorghum

Persistent drought affects global crop production and is becoming more severe in many parts of the world in recent decades. Deciphering how plants respond to drought will facilitate the development of flexible mitigation strategies. Sorghum bicolor L. Moench (sorghum), a major cereal crop and an emerging bioenergy crop, exhibits remarkable resilience to drought. To better understand the molecular traits that underlie sorghum's remarkable drought tolerance, we undertook a large-scale sorghum gene expression profiling effort, totaling nearly 1500 transcriptome profiles, across a 3-year field study with replicated plots in California's Central Valley. This study included time-resolved gene expression data from roots and leaves of two sorghum genotypes, BTx642 and RTx430, with different pre-flowering and post-flowering drought-tolerance adaptations under control and drought conditions. Quantification of genotype-specific drought tolerance effects was enabled by de novo sequencing, assembly, and annotation of both BTx642 and RTx430 genomes. These reference-quality genomes were used to construct a pangene set for characterizing conserved and genotype-specific expression. By integrating time-resolved transcriptomic responses to drought in the field across three consecutive years, we identified a set of 726 drought-responsive genes that responded similarly in all 3 years of our field study. Functional enrichment analysis identified abiotic stress, secondary cell wall-related processes and metabolism as particularly affected under both types of drought stress. We also found that some glyoxylate cycle pathway genes, including malate synthase and isocitrate lyase, are differentially regulated particularly during post-flowering drought stress, implicating this pathway as potentially important for drought responsiveness. This expansive dataset represents a unique resource for sorghum and drought research communities and provides a methodological framework for the integration of multi-faceted time-resolved transcriptomic datasets.

Cole, Benjamin [USDOE Joint Genome Institute (JGI)↗
DOE OSTI2021

Revisions of ORNL 188 W Process Based on Nonradiological Experiments

Tungsten-188 is in widespread use in the 188 W(t 1/2 = 69 d)/ 188 Re(t 1/2 =16.9 h) biomedical generator. Oak Ridge National Laboratory (ORNL) has been providing this product to the world since 1999. At ORNL, 188 W is produced via irradiation in ORNL’s High Flux Isotope Reactor (HFIR). Enriched 186 W targets in the form of sintered metallic pellets or rings achieve a compact loading in the irradiation vessel, providing a high yield per unit target. The enrichment of the target is >90% 186 W and this isotope undergoes double neutron capture to produce the desired 188W product. While 188 W is produced by neutron bombardment, 191 Os(t 1/2 = 15.4 d) is simultaneously produced as a byproduct requiring separation from 188 W by post irradiation treatment. In the current processing pathway, the irradiated W metal pellets or rings are first converted into an oxide form of WO 3 by heating the irradiated W metal target at 750°C in a quartz reaction vessel inside a vertical furnace under a constant flow of air. During heating, W metal reacts with oxygen in the air to produce WO 3 , which is soluble in 6 M NaOH for later purification process. This oxidation process also converts 188 Os (the decay daughter of 188 W) and 191 Os (the irradiation produced byproduct) into OsO 4 , a highly volatile and toxic gas. The gaseous effluents driven from the quartz reaction vessel are passed through a scrubbing array to remove OsO 4 before the air is discharged from the process. This heterogeneous oxidation method simultaneously achieves two goals: 1). converting metal target to a soluble oxide form and 2). separating volatile OsO 4 away from the solid WO 3 product, although harmful 191 OsO 4 is unfavorable but being taken care of by the down road scrubbing array. In the past twenty years the existing OsO 4 scrubbing array served well in preventing OsO 4 from being released into the environment, until July of 2020 when a minor amount of 191 Os was found to have been released into the environment which resulted in a standby of building 4501 from July 2020 to February 2021.Since October 20 of 2020 a team of researchers from groups of RSTD and NEFD were organized to work for the following tasks: (1) Fully understand the root causes of the July incident of 191 Os release and create a redesigned 191 Os scrubbing array to eliminate the possibility of 191 Os release in future 188 W processes; (2) In Phase-1 tests, select a correct air (O 2 ) flow rate in 188 W process, that provides sufficient oxygen for the oxidation of tungsten metal, while still allowing sufficient resonance time for 191 Os removal by the scrubbers; (3) In Phase-2 tests, confirm the efficiency of the redesigned scrubbing array to absorb excessive amount of non-rad OsO 4 (generated from Os metal powder) at the selected air flow; (4) In Phase-3 tests, simulate the hot cell 188 W process by heating pressed non-rad W-Os pellets in a quartz vessel of new design and the new array under operation parameters selected in Phase-1 and -2; (5) Complete a new operation procedure for 188 W process in hot cell and a TM report as a summary of the Os Mitigation Project. This TM report summarizes the investigation on root causes from technical aspects in July 191 Os release and the correspondent improvement towards the redesigned 191 Os scrubbing system. The report presents the efforts made on selection of optimal operational parameter with the new scrubbing array and the quartz vessel of new design, based on experiment data obtained in Phase-1, -2 and -3 tests. Further renovations for 188 W process and additional improvement of W target treatment will also be discussed.

07 ISOTOPE AND RADIATION SOURCES↗