Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “refinement”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

Refined model of the {Fe9} magnetic molecule from low-temperature inelastic neutron scattering studies

We present a refined model of the {Fe9} tridiminished icosahedron magnetic molecule system. This molecule was originally modeled as being composed of two ({Fe3} and {Fe6}) clusters, with the Fe3+ ions within each cluster being coupled via exchange interactions, but with no coupling between the clusters. The present inelastic neutron scattering (INS) measurements were used to probe the low-lying energy spectrum of {Fe9}, and these results demonstrate that the previously published model of two uncoupled clusters is incomplete. To achieve agreement between the experiment and theory, we have augmented the model with relatively small exchange coupling between the clusters. A combination of Lanczos matrix diagonalization and quantum Monte Carlo simulations have been used to achieve good agreement between the experimental data and the improved model of the full {Fe9} system despite the complexity of this model (with Hilbert space dimension >107).

36 MATERIALS SCIENCE↗

Improved nuclear physics near A = 61 refines urca neutrino luminosities in accreted neutron star crusts

We performed Penning trap mass measurements for 61 Zn at the National Superconducting Cyclotron Laboratory and NuShellX calculations of the 61 Zn and 62 Ga structure using the GXPF1A Hamiltonian to obtain improved estimates of the 61 Zn(p,γ) 62 Ga and 60 Cu(p,γ) 61 Zn reaction rates. Surveying astrophysical conditions for type-I x-ray bursts with the code mesa, implementing our improved reaction rates, and taking into account updated nuclear masses for 61 V and 61 Cr from the recent literature, we refine the neutrino luminosity from the important mass number A = 61 urca cooling source in accreted neutron-star crusts. Furthermore, this improves our understanding of the thermal barrier between deep heating in the crust and the shallow depths where extra heat is needed to explain x-ray superbursts, as well as the expected signature of crust urca neutrino emission in light curves of cooling transients

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Challenges and surprises that arise with nucleic acids during model building and refinement

The challenges that arise in nucleic acid model building as a consequence of their simpler and more symmetric super-secondary structures are addressed. The process of building and refining crystal structures of nucleic acids, although similar to that for proteins, has some peculiarities that give rise to both various complications and various benefits. Although conventional isomorphous replacement phasing techniques are typically used to generate an experimental electron-density map for the purposes of determining novel nucleic acid structures, it is also possible to couple the phasing and model-building steps to permit the solution of complex and novel RNA three-dimensional structures without the need for conventional heavy-atom phasing approaches.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Refinements for Bragg coherent X-ray diffraction imaging: electron backscatter diffraction alignment and strain field computation

Bragg coherent X-ray diffraction imaging (BCDI) allows the 3D measurement of lattice strain along the scattering vector for specific microcrystals. If at least three linearly independent reflections are measured, the 3D variation of the full lattice strain tensor within the microcrystal can be recovered. However, this requires knowledge of the crystal orientation, which is typically attained via estimates based on crystal geometry or synchrotron microbeam Laue diffraction measurements. Presented here is an alternative method to determine the crystal orientation for BCDI measurements using electron backscatter diffraction (EBSD) to align Fe–Ni and Co–Fe alloy microcrystals on three different substrates. The orientation matrix is calculated from EBSD Euler angles and compared with the orientation determined using microbeam Laue diffraction. The average angular mismatch between the orientation matrices is less than ∼6°, which is reasonable for the search for Bragg reflections. The use of an orientation matrix derived from EBSD is demonstrated to align and measure five reflections for a single Fe–Ni microcrystal via multi-reflection BCDI. Using this data set, a refined strain field computation based on the gradient of the complex exponential of the phase is developed. This approach is shown to increase accuracy, especially in the presence of dislocations. The results demonstrate the feasibility of using EBSD to pre-align BCDI samples and the application of more efficient approaches to determine the full lattice strain tensor with greater accuracy.

42 ENGINEERING↗

Integrating machine learning interatomic potentials with hybrid reverse Monte Carlo structure refinements in RMCProfile

Structure refinement with reverse Monte Carlo (RMC) is a powerful tool for interpreting experimental diffraction data. To ensure that the under-constrained RMC algorithm yields reasonable results, the hybrid RMC approach applies interatomic potentials to obtain solutions that are both physically sensible and in agreement with experiment. To expand the range of materials that can be studied with hybrid RMC, we have implemented a new interatomic potential constraint in RMCProfile that grants flexibility to apply potentials supported by the Large-scale Atomic/Molecular Massively Parallel Simulator ( LAMMPS ) molecular dynamics code. This includes machine learning interatomic potentials, which provide a pathway to applying hybrid RMC to materials without currently available interatomic potentials. To this end, we present a methodology to use RMC to train machine learning interatomic potentials for hybrid RMC applications.

Cuillier, Paul↗

High Performance Adaptive Physics Refinement to Enable Large-Scale Tracking of Cancer Cell Trajectory

The ability to track simulated cancer cells through the circulatory system, important for developing a mechanistic understanding of metastatic spread, pushes the limits of today's supercomputers by requiring the simulation of large fluid volumes at cellular-scale resolution. To overcome this challenge, we introduce a new adaptive physics refinement (APR) method that captures cellular-scale interaction across large domains and leverages a hybrid CPU-GPU approach to maximize performance. Through algorithmic advances that integrate multi-physics and multi-resolution models, we establish a finely resolved window with explicitly modeled cells coupled to a coarsely resolved bulk fluid domain. In this work we present multiple validations of the APR framework by comparing against fully resolved fluid-structure interaction methods and employ techniques, such as latency hiding and maximizing memory bandwidth, to effectively utilize heterogeneous node architectures. Collectively, these computational developments and performance optimizations provide a robust and scalable framework to enable system-level simulations of cancer cell transport.

59 BASIC BIOLOGICAL SCIENCES↗

CPU Isosurface Ray Tracing of Adaptive Mesh Refinement Data

Adaptive mesh refinement (AMR) is a key technology for large-scale simulations that allows for adaptively changing the simulation mesh resolution, resulting in significant computational and storage savings. However, visualizing such AMR data poses a significant challenge due to the difficulties introduced by the hierarchical representation when reconstructing continuous field values. Here, we detail a comprehensive solution for interactive isosurface rendering of block-structured AMR data. We contribute a novel reconstruction strategy—the octant method—which is continuous, adaptive and simple to implement. Furthermore, we present a generally applicable hybrid implicit isosurface ray-tracing method, which provides better rendering quality and performance than the built-in sampling-based approach in OSPRay. Finally, we integrate our octant method and hybrid isosurface geometry into OSPRay as a module, providing the ability to create high-quality interactive visualizations combining volume and isosurface representations of BS-AMR data. Lastly, we evaluate the rendering performance, memory consumption and quality of our method on two gigascale block-structured AMR datasets.

97 MATHEMATICS AND COMPUTING↗

Characterization and differentiation of aluminum powders used in improvised explosive devices. Part 2: Micromorphometric method refinement and preliminary statistical analysis

Abstract Aluminum (Al) powder is commonly encountered in improvised explosive devices (IEDs) as a metallic fuel due to its availability and low cost. Although available commercially in powder form, amateur bomb‐makers also produce their own Al powder via simple methods found online. In order to provide investigative leads and forensic intelligence, it is important to evaluate not only the composition of homemade devices, but also to distinguish between the various forms of Al powder they contain. To achieve this goal, a method using automated microscopy in combination with statistical techniques has been demonstrated to have the potential to provide source discrimination and investigative leads in source attribution of Al powders in IEDs. The present research refined this method and investigated 59 industrially and amateurly produced Al powder sources with seven subsamples per source using two traditional linear discriminant analyses (LDA), one with a standard data split for training and testing, and another using leave‐one‐out cross‐validation. Averaging the classification accuracies for the two LDA‐based analyses, LDA has the ability to correctly classify 59.26%, 83.35%, and 80.69% of the samples based on their powder source, type, and production method, respectively. This classification accuracy represents a 3407%, 317%, and 61.38% increase in accuracy from random class assignment, respectively. Further, in most instances of incorrect data attribution to a particular source, the subsample has been misidentified with another sample of the same powder type or production method.

Ommen, Danica M.↗

Development of evaluation models of manpower needs for dismantling the dry conversion process-related equipment in uranium refining and conversion plant (URCP)

Evaluation models for determining the manpower needs for dismantling various types of equipment in uranium refining and conversion plant (URCP) have been developed. The models are widely applicable to other uranium handling facilities. Additionally, a simplified model was developed for easily and accurately calculating the manpower needs for dismantling dry conversion process-related equipment (DP equipment). It is important to evaluate beforehand project management data such as manpower needs to prepare an optimized decommissioning plan and implement effective dismantling activity. The Japan Atomic Energy Agency (JAEA) has developed the project management data evaluation system for dismantling activities (PRODIA code), which can generate project management data using evaluation models. For preparing an optimized decommissioning plan, these evaluation models should be established based on the type of nuclear facility and actual dismantling data. In URCP, the dry conversion process of reprocessed uranium and others was operated until 1999, and the equipment related to the main process was dismantled from 2008 to 2011. Actual data such as manpower for dismantling were collected during the dismantling activities, and evaluation models were developed using the collected actual data on the basis of equipment classification considering the characteristics of uranium handling facility. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Improving IMRT-plan quality with MLC leaf position refinement post plan optimization

Purpose: In intensity-modulated radiation therapy (IMRT) planning, reducing the pencil-beam size may lead to a significant improvement in dose conformity, but also increase the time needed for the dose calculation and plan optimization. The authors develop and evaluate a postoptimization refinement (POpR) method, which makes fine adjustments to the multileaf collimator (MLC) leaf positions after plan optimization, enhancing the spatial precision and improving the plan quality without a significant impact on the computational burden. Methods: The authors' POpR method is implemented using a commercial treatment planning system based on direct aperture optimization. After an IMRT plan is optimized using pencil beams with regular pencil-beam step size, a greedy search is conducted by looping through all of the involved MLC leaves to see if moving the MLC leaf in or out by half of a pencil-beam step size will improve the objective function value. The half-sized pencil beams, which are used for updating dose distribution in the greedy search, are derived from the existing full-sized pencil beams without need for further pencil-beam dose calculations. A benchmark phantom case and a head-and-neck (HN) case are studied for testing the authors' POpR method. Results: Using a benchmark phantom and a HN case, the authors have verified that their POpR method can be an efficient technique in the IMRT planning process. Effectiveness of POpR is confirmed by noting significant improvements in objective function values. Dosimetric benefits of POpR are comparable to those of using a finer pencil-beam size from the optimization start, but with far less computation and time. Conclusions: The POpR is a feasible and practical method to significantly improve IMRT-plan quality without compromising the planning efficiency.

60 APPLIED LIFE SCIENCES↗

Investigation of various energy deposition kernel refinements for the convolution/superposition method

Purpose: Several simplifications used in clinical implementations of the convolution/superposition (C/S) method, specifically, density scaling of water kernels for heterogeneous media and use of a single polyenergetic kernel, lead to dose calculation inaccuracies. Although these weaknesses of the C/S method are known, it is not well known which of these simplifications has the largest effect on dose calculation accuracy in clinical situations. The purpose of this study was to generate and characterize high-resolution, polyenergetic, and material-specific energy deposition kernels (EDKs), as well as to investigate the dosimetric impact of implementing spatially variant polyenergetic and material-specific kernels in a collapsed cone C/S algorithm.Methods: High-resolution, monoenergetic water EDKs and various material-specific EDKs were simulated using the EGSnrc Monte Carlo code. Polyenergetic kernels, reflecting the primary spectrum of a clinical 6 MV photon beam at different locations in a water phantom, were calculated for different depths, field sizes, and off-axis distances. To investigate the dosimetric impact of implementing spatially variant polyenergetic kernels, depth dose curves in water were calculated using two different implementations of the collapsed cone C/S method. The first method uses a single polyenergetic kernel, while the second method fully takes into account spectral changes in the convolution calculation. To investigate the dosimetric impact of implementing material-specific kernels, depth dose curves were calculated for a simplified titanium implant geometry using both a traditional C/S implementation that performs density scaling of water kernels and a novel implementation using material-specific kernels.Results: For our high-resolution kernels, we found good agreement with the Mackie et al. kernels, with some differences near the interaction site for low photon energies (<500 keV). For our spatially variant polyenergetic kernels, we found that depth was the most dominant factor affecting the pattern of energy deposition; however, the effects of field size and off-axis distance were not negligible. For the material-specific kernels, we found that as the density of the material increased, more energy was deposited laterally by charged particles, as opposed to in the forward direction. Thus, density scaling of water kernels becomes a worse approximation as the density and the effective atomic number of the material differ more from water. Implementation of spatially variant, polyenergetic kernels increased the percent depth dose value at 25 cm depth by 2.1%–5.8% depending on the field size, while implementation of titanium kernels gave 4.9% higher dose upstream of the metal cavity (i.e., higher backscatter dose) and 8.2% lower dose downstream of the cavity.Conclusions: Of the various kernel refinements investigated, inclusion of depth-dependent and metal-specific kernels into the C/S method has the greatest potential to improve dose calculation accuracy. Implementation of spatially variant polyenergetic kernels resulted in a harder depth dose curve and thus has the potential to affect beam modeling parameters obtained in the commissioning process. For metal implants, the C/S algorithms generally underestimate the dose upstream and overestimate the dose downstream of the implant. Implementation of a metal-specific kernel mitigated both of these errors.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Rheological Properties of Enzymatically Hydrolyzed Corn Stover Pretreated via Deacetylation and Mechanical Refining

Lignocellulosic biomass is a feedstock for fuels and chemicals that does not compete with food resources and has less contaminants than refuse-derived biomass feedstocks. To convert lignocellulosics to biofuels or value-added products, multiple processing steps are typically necessary. One method of producing biofuels from lignocellulosic biomass utilizes a deacetylation and mechanical refining pretreatment and an enzymatic hydrolysis reaction to produce fermentable sugars from cellulose and hemicellulose. The rheological properties of biomass, such as yield stress and plastic viscosity, change during enzymatic hydrolysis and alter the energy requirements for pumping and mixing, an important consideration for the design of processing equipment. The dynamic changes in rheological properties that occur in a corn stover feedstock undergoing enzymatic hydrolysis are characterized in this work, and the influence on pressure losses in piping systems is estimated. Two rheometer geometries were fabricated with stereolithography 3D printing to reduce wall slip and sample ejection. The slurries have complex rheological behaviors that include shear-thinning behavior. Shear stress ramps were performed on samples at 20 and 50 degrees C using the custom geometries, and the Herschel-Bulkley model was fit to the data. The dynamic nature of the rheological properties is correlated with changes in the average fiber length at various extents of reaction, and the influence of solids concentration on the observed rheology and piping pressure losses is discussed.

09 BIOMASS FUELS↗

Refinement of the twinned structure of cymrite from the Ruby Creek deposit (Alaska)

The mineral cymrite from the Ruby Creek deposit (Alaska) was reinvestigated by X-ray diffraction in a pseudo-orthorhombic unit cell with a = 5.3350(1) A, b = 36.9258(8) A, c = 7.6934(1) A, {beta} = 90.00(1){sup o}. A twin law corresponding to a sixfold axis was revealed for the first time. The structure was refined in the monoclinic space group P12{sub 1}1 to the R factor of 5.4%. The Al and Si atoms are assumed to be ordered within a double layer. The rotation of the cation sublattice by 60{sup o} around the c axis leads to the disorder of the T sites in the crystal structure (T = Al, Si).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Accurate crystal structure refinement of La{sub 3}Ta{sub 0.25}Ga{sub 5.25}Si{sub 0.5}O{sub 14}

An accurate X-ray diffraction study of an La{sub 3}Ta{sub 0.25}Ga{sub 5.25}Si{sub 0.5}O{sub 14} single crystal has been performed using two data sets obtained independently for the same sample in different orientations on a diffractometer with a 2D CCD detector. This structure was refined with an averaged set of these data (a = 8.1936(15) A c = 5.1114(6) A, sp. gr. P321, Z = 1, R/wR = 0.75/0.71%, 4030 independent reflections). This analysis was aimed at determining the character of the occupancies of the cation position in the structure. The octahedra at the origin of coordinates turned out to be statistically occupied by gallium and tantalum ions of similar sizes, whereas the tetrahedra on the threefold symmetry axes are occupied by gallium and silicon whose ionic radii differ significantly. The latter circumstance caused the splitting of oxygen positions and made it possible to reliably establish the structural position of statistically located [SiO{sub 4}] and [GaO{sub 4}] tetrahedra of different sizes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Refinement of the composition and structure of YBaCo{sub 4-x}Al{sub x}O{sub 7+{delta}} crystals

YBa(Co{sub 4-x}Al{sub x})O{sub 7+{delta}} (114Y) crystals have been grown in the Y-Ba-Co-O system by spontaneous crystallization from a slowly cooled nonstoichiometric melt. To change the oxygen content, the crystals were isothermally annealed in air in the range of 280-490 Degree-Sign C. The crystals grown were characterized by scanning electron microscopy and powder X-ray diffraction. According to the data of an X-ray spectroscopic quantitative microprobe analysis, the average compositions of 'as-grown' and oxygen-saturated crystals were Y{sub 1.04}Ba{sub 1}Co{sub 3.54}Al{sub 0.50}O{sub 7.8} and Y{sub 1.02}Ba{sub 1}Co{sub 3.55}Al{sub 0.51}O{sub 8.4}, respectively. The refinement of the crystal structure after saturation on an automatic Bruker X8APEX diffractometer with a CCD detector (MoK{alpha} radiation, graphite monochromator, {theta}{sub max} = 32.54 Degree-Sign , sp. gr. P6{sub 3}mc, a = 6.2746(9), c = 10.257(3) Angstrom-Sign , V = 349.71(13) Angstrom-Sign {sup 3}, Z = 2, d{sub calcd} = 5.220 g/cm{sup 3}) reveals the location of Al in two independent positions of Co atoms and yields the general formula of the compound as YBaCo{sub 3.26}Al{sub 0.74}O{sub 7}. Problems related to the difference in the compositions obtained by different methods are discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Crystallization, crystal-structure refinement, and IR spectroscopy of a synthetic hexahydroborite analog

The crystal structure of the hexahydroborite analog Ca[B(OH){sub 4}]{sub 2} {center_dot} 2H{sub 2}O (a = 7.9941(3) Angstrom-Sign , b = 6.6321(2) Angstrom-Sign , c = 7.9871(3) Angstrom-Sign , {beta} = 104.166(4) Degree-Sign , V = 410.58(3) Angstrom-Sign {sup 3}, sp. gr. P2/c, Z = 2, {rho}{sub calc} = 1.891 g/cm{sup 3}; Xcalibur S CCD automated diffractometer, 1196 reflections with I > 2{sigma}(I), {lambda}MoK{sub {alpha}}), which was synthesized by the hydrothermal method via the recrystallization of calciborite CaB{sub 2}O{sub 4} (M) in the M - B{sub 2}O{sub 3} - H{sub 2}O system (t = 250 Degree-Sign C and P = 70-80 atm), was refined by the least-squares method with anisotropic displacement parameters (H atoms were located; R{sub 1} = 0.0260). The structure of synthetic hexahydroborite consists of infinite columns running along the c axis. The columns are formed by Ca polyhedra linked together and to [B(OH){sub 4}] orthotetrahedra by sharing edges. Along the two other axes, the translationally equivalent columns are linked only by hydrogen bonds. The presence of a stronger bond between the discrete (Ca-B-O) columns along the shortest (b = 6.6 Angstrom-Sign ) axis accounts for the possibility of the shift of the columns by 1/2T{sub b} and the formation of the second modification of Ca[B(OH){sub 4}]{sub 2} {center_dot} 2H{sub 2}O. The crystals of synthetic hexahydroborite were studied by IR spectroscopy. A crystal-chemical analysis was performed for a series of natural metaborates with the general formula CaB{sub 2}O{sub 4} {center_dot} nH{sub 2}O (CaO: B{sub 2}O{sub 3} = 1: 1, n = 0-6), including calciborite CaB{sub 2}O{sub 4} and hexahydroborite CaB{sub 2}O{sub 4} {center_dot} 6H{sub 2}O as the end members.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Synthesis, crystal structure refinement, and nonlinear-optical properties of CaB{sub 3}O{sub 5}(OH): Comparative crystal chemistry of calcium triborates

Calcium triborate CaB{sub 3}O5(OH) obtained by hydrothermal synthesis in the Ca(OH){sub 2}–H{sub 3}BO{sub 3}–Na{sub 2}CO{sub 3}–KCl system is studied by single-crystal X-ray diffraction. The parameters of the orthorhombic unit cell are as follows: a = 13.490(1), b = 6.9576(3), and c = 4.3930(2) Å; V = 412.32(3) Å{sup 3} and space group Pna2{sub 1}. The structure is refined in the anisotropic approximation of the atomic displacement parameters to R = 4.28% using 972 vertical bar F vertical bar > 4σ(F). It is confirmed that the crystal structure of Ca triborate CaB{sub 3}O{sub 5}(OH) is identical to that described earlier. The hydrogen atom is localized. An SHG signal stronger than that of the quartz standard is registered. The phase transition of calcium triborate into calciborite is found on heating. The comparative crystal-chemical analysis of a series of borates with the general chemical formula 2CaO · 3B{sub 2}O{sub 3} · nH{sub 2}O (n = 0–13) with the constant CaO: B{sub 2}O{sub 3}= 2: 3 ratio and variable content of water is performed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Fast and effective reordering of columns within supernodes using partition refinement

In this paper, we consider the problem of computing a triangular factorization of a sparse symmetric matrix using Gaussian elimination. We assume that the sparse matrix has been permuted using a fill-reducing ordering algorithm. When the matrix is symmetric positive definite, the sparsity structure of the triangular factor can be determined once the fill-reducing ordering has been computed. Thus, an efficient numerical factorization scheme can be designed so that only the nonzero entries are stored and operated on. On modern architectures, the positions of the nonzero entries in the triangular factor play a big role in determining the efficiency. It is desirable to have dense blocks in the factor so that the computation can be cast in terms of level-3 BLAS as much as possible. On architectures with GPUs, for example, it is also desirable for these dense blocks to be as large as possible in order to reduce the times to transfer data between the main CPU and the GPUs. We address the problem of locally refining the ordering so that the number of dense blocks is reduced and the sizes of these dense blocks are increased in the triangular factor.

Jacquelin, Mathias↗