Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “phase transformations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

Overpotential-Dependent Phase Transformation Pathways in Lithium Iron Phosphate Battery Electrodes

An objective in battery development for higher storage energy density is the design of compounds that can accommodate maximum ion concentration change over useful electrochemical windows. Not surprisingly, many storage compounds undergo phase transitions in-situ, including production of metastable phases. Unique to this environment is the frequent application of electrical over- and underpotentials, which are the electrical analogs to undercooling and superheating. Surprisingly, overpotential effects on phase stability and transformation mechanisms have not been studied in detail. Here we use synchrotron X-ray diffraction performed in-situ during potentiostatic and galvanostatic cycling, combined with phase-field modeling, to reveal a remarkable dependence of phase transition pathway on overpotential in the model olivine Li1-xFePO4. At both low (e.g., <20 mV) and high (>75 mV) overpotentials a crystal-to-crystal olivine transformation is preferred, whereas at intermediate overpotentials a crystalline-to-amorphous phase transition dominates. At nanoscale particle size, amorphization is further emphasized. Implications for battery use and design are considered.

43 PARTICLE ACCELERATORS↗

Interband electronic transitions and phase transformation of multiferroic Bi{sub 1−x}La{sub x}Fe{sub 1−y}Ti{sub y}O{sub 3} ceramics revealed by temperature-dependent spectroscopic ellipsometry

Optical properties and phase transition of Bi{sub 1−x}La{sub x}Fe{sub 1−y}Ti{sub y}O{sub 3} (BLFTO) ceramics with different composition (0.02 ≤ x ≤ 0.10, 0.01 ≤ y ≤ 0.06) have been investigated by spectroscopic ellipsometry (SE) in the temperature range of −70–450 °C. The real part of the complex dielectric function ε{sub 1} increases with the temperature. Meanwhile, the imaginary part ε{sub 2} in the low-energy region decreases with the temperature and has an opposite trend in the high-energy side. Four typical interband transitions (E{sub a} ∼ 2.50 eV, E{sub b} ∼ 2.70 eV, E{sub c} ∼ 3.60 eV, and E{sub d} ∼ 4.25 eV) can be observed from the second derivative of the complex dielectric functions with aid of the standard critical point model. The critical point (CP) transition becomes broadening and shifts to a lower energy side as La and Ti compositions increase. Moreover, the CP transition energies show a red-shift trend with increasing the temperature until 320 °C, due to the lattice thermal expansion and electron-phonon interaction. The typical interband transitions and partial spectral weight present anomalies in the proximity of antiferromagnetic transition owing to the coupling between magnetic and ferroelectric order parameters and spin-lattice coupling for BLFTO multiferroic materials. It was found that the Néel temperature of BLFTO ceramics decreases from 364 to 349 °C with increasing doping composition of La and Ti elements. These phenomena can be attributed to the modification of electronic structure and magnetic order because the differences of electronegativity and ionic radii between Bi and La, Fe and Ti induce the variations on the bond angle and bond length between cations and anions. Moreover, the substitution for magnetic Fe{sup 3+} ions with nonmagnetic Ti{sup 4+} ions can reduce the exchange interaction between adjacent magnetic moments. Therefore, SE technique can be sensitive for detecting the phase/structural transitions of multiferroic oxides.

36 MATERIALS SCIENCE↗

Peculiarities of Phase Transformations of Polymer Solutions in Deformable Porous Matrices

Methods of equilibrium chemical thermodynamics have been used to simulate laws of the influence of geometric factors (pore shape and volume) on the phase equilibria is stratifying polymer solutions in porous matrices. Using the example of the phase separation in a liquid polybutadiene–polystyrene system, it is established that deformation of the porous matrix determining the geometric characteristics of pores can be used to control the mutual solubilities of components and the volumes and thermodynamic stability of coexisting equilibrium phases. Significant deformations of the matrix lead to suppression of the phase separation in pores and make any solution compositions possible (up to equimolar mixtures).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Nonequilibrium Diffusional Phase Transformations in Alloys Induced by Migration of Grain Boundaries and Dislocations

The main scenarios of nonequilibrium diffusional transformations induced by moving defects (dislocations, grain boundaries) in alloys under severe plastic deformation are considered. It has been shown that the phase state locally changes in the area of a defect where thermodynamic properties of alloy are locally changed, and the attained state is frozen after the displacement of a defect due to the difference between the rates of bulk diffusion and diffusion on a defect. For this reason, an alloy shifts from the state of its thermodynamic equilibrium under treatment, thus different nonequilibrium states, such as the disordering of alloy, the dissolution of equilibrium phase precipitates, the appearance of nonequilibrium phases, and the formation of regular structures, are possible depending on the type of the system. These effects may take place if the treatment of an alloy is performed at moderate temperatures, when diffusion is frozen in the bulk and rather active on defects. The phenomena of phase and structural instability developing under severe plastic deformation at moderate temperatures are considered within the framework of the proposed model.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Phase Transformation of TiO{sub 2} from Anatase to Rutile by Thermal Annealing and Swift Heavy Ion Irradiation

In the present study, we probe into the phase transition from anatase to rutile in nanocrystalline thin films under thermal annealing and swift heavy ion (SHI) irradiation. TiO{sub 2} thin films were prepared through chemical route using sol-gel and spin coating techniques on silicon (100) substrates. The structural studies of the annealed films were characterized by GAXRD and Raman spectroscopy. Though thermal annealing is known to cause transformation from anatase to rutile phase of TiO{sub 2} in a temperature interval of 700 to 900 C, in nanoparticle thin films, we found {approx}35 vol% of anatase still remains even after annealing at 1000 C. SHI irradiation by 200 MeV Ag ions on the other hand resulted in complete conversion to rutile phase at fluence of 3x10{sup 12} ions.cm{sup -2}. SHI induced thermal spike seems to be responsible for conversion of anatase to rutile phase.

36 MATERIALS SCIENCE↗

Structural Phase Transformation in Strained Monolayer MoWSe 2 Alloy

Two-dimensional (2D) materials exhibit different mechanical properties from their bulk counterparts owing to their monolayer atomic thickness. In this paper, we have examined the mechanical behavior of 2D molybdenum tungsten diselenide (MoWSe 2 ) precipitation alloy grown using chemical vapor deposition and composed of numerous nanoscopic MoSe 2 and WSe 2 regions. Applying a bending strain blue-shifted the MoSe 2 and WSe 2 A 1g Raman modes with the stress concentrated near the precipitate interfaces predominantly affecting the WSe 2 modes. In situ local Raman measurements suggested that the crack propagated primarily thorough MoSe 2 -rich regions in the monolayer alloy. Molecular dynamics (MD) simulations were performed to study crack propagation in an MoSe 2 monolayer containing nanoscopic WSe 2 regions akin to the experiment. Raman spectra calculated from MD trajectories of crack propagation confirmed the emergence of intermediate peaks in the strained monolayer alloy, mirroring experimental results. The simulations revealed that the stress buildup around the crack tip caused an irreversible structural transformation from the 2H to 1T phase both in the MoSe 2 matrix and WSe 2 patches. This was corroborated by high-angle annular dark-field images. Finally, crack branching and subsequent healing of a crack branch were also observed in WSe 2 , indicating the increased toughness and crack propagation resistance of the alloyed 2D MoWSe 2 over the unalloyed counterparts.

36 MATERIALS SCIENCE↗

Pressure-induced structural phase transformation in cobalt(II) dicyanamide

In situ synchrotron powder diffraction has been used to probe the pressure-dependent structural properties of the magnetic molecular framework material Co(dca) 2 [dca = dicyanamide or N(CN) 2 - ]. An orthorhombic ( Pmnn ) to monoclinic ( P 2 1 / n ) transformation to a high-pressure phase, namely γ-Co(dca) 2 , occurs at 1.1 GPa. Structural determination of γ-Co(dca) 2 shows that the rutile-like topology of the pristine material is retained at high pressures, with the lower symmetry allowing a progression of volume-reducing structural distortions. γ-Co(dca) 2 was stable at the maximum pressure measured of 4.2 GPa. Both phases were soft, with bulk moduli ( B 0 ) for α-Co(dca) 2 and γ-Co(dca) 2 of 13.15 (18) and 9.0 (6) GPa, respectively. Modest uniaxial negative linear compressibility ( K ) of the order of -4 TPa -1 was observed over the entire measured pressure range.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Phase transformation, thermal expansion and electrical conductivity of lanthanum chromite

Graphical abstract: - Highlights: • Orthorhombic and rhombohedral phases co-exist at ≥260 °C and cubic above 1000 °C. • Polymorphic changes with temperature in air and Ar–3%H{sub 2} are observed. • Lattice volume change in Ar–3%H{sub 2} atmosphere corresponds to Cr{sup 4+} → Cr{sup 3+} transition. • Change in valence state of Cr{sup 4+} to Cr{sup 3+} results in lower electrical conductivity. • Experimental evidence is provided for poor densification of LaCrO{sub 3} in air. - Abstract: This paper addresses discrepancies pertaining to structural, thermal and electrical properties of lanthanum chromite. Experimental evidence is provided to support the hypothesis for poor densification in air as well as reduction in electrical conductivity in reducing atmosphere. Sintering condition for the synthesis of LaCrO{sub 3} was optimized to 1450 °C and 10 h. Thermo-analytical (differential scanning calorimetry – DSC) and high temperature X-ray diffraction (HT-XRD) studies show that orthorhombic lanthanum chromite transforms into rhombohedral structure at ∼260 °C and cubic structure above 1000 °C. Co-existence of the structural phases and the variation in each polymorph with temperature in both air and 3%H{sub 2}–Ar atmosphere is reported. Presence and absence of Cr-rich phase at inter-particle neck are observed in oxidizing and reducing atmospheres respectively. The linear thermal expansion co-efficient was calculated to be 10.8 ± 0.2 × 10{sup −6} °C{sup −1} in the temperature range of RT–1400 °C. Electrical conductivity of lanthanum chromite was found to be 0.11 S/cm in air. A decrease in electrical conductivity (0.02 S/cm at 800 °C) of LaCrO{sub 3}, as observed in reducing atmosphere (3%H{sub 2}–Ar), corresponds to lattice volume change as indicated by peak shift in HT-XRD results.

36 MATERIALS SCIENCE↗

The effects of Fe and Al on the phase transformations and mechanical behavior of β-Ti alloy Ti-11at.%Cr

Alloy composition is important for developing desired microstructures in beta-titanium (β-Ti) alloys during thermomechanical processing. In this work, the relatively low-cost alloying elements iron (Fe) and aluminum (Al) were added to a base Ti-11at%chromium (Cr) alloy and in-situ and ex-situ examination of the microstructural evolution and mechanical properties during tension, hardness, elevated temperature X-ray diffraction (XRD) and resonance ultrasound spectroscopy (RUS) were performed. The 400 °C XRD revealed that Ti-11at%Cr underwent β-to-ω and β-to-α transformations. Adding 0.85at% Fe reduced the volume fraction of the ω- and α-phases, and adding 5.3at% Al inhibited the β-to-ω transformation. The 400 °C RUS showed that the alloys containing the ω phase exhibited an increase in shear modulus (G) of ~140%, while the ω-free alloys exhibited an increase of only ~102%. The hardness and strength values of the ω-containing Ti-11Cr and Ti-11Cr-0.85Fe increased with increased ω-phase volume fraction when the ω/α ratio was greater than 0.25. The relationship between ω/α volume ratios and mechanical properties is discussed.

36 MATERIALS SCIENCE↗

Phase transformations in nanostructured coatings based on Zr-Y-O and produced by a pulse magnetron sputtering method

Deposition of nanostructured coatings on the basis of Zr-Y-O was implemented by the pulse magnetron methods. Structural-phase states and morphology of the nanostructured coatings were investigated by TEM, SEM and the high-temperature X-ray method. The method of the high-temperature X-ray diffraction revealed the presence of reversible phase transition of the tetragonal phase to the monoclinic phase, which can ensure stress relaxation and closure of surface cracks.

36 MATERIALS SCIENCE↗

Transmission electron microscopy investigation of phase transformation and fuel constituent redistribution in neutron irradiated U-10wt.%Zr fuel

Uranium-10wt.%zirconium (U-10wt.%Zr) is a primary candidate for fast reactor nuclear fuels. However, there is a lack of data characterizing neutron irradiated crystallographic phases and chemistry. In the current study, the microstructural evolution of a U-10wt.%Zr fuel neutron irradiated to a burnup of 5.7 at.% was investigated by scanning transmission electron microscopy, energy dispersive spectroscopy, and selected area electron diffraction to determine the major phases, alterations in microstructure, and variations in local chemical composition at different localities of a fuel cross-section. The current study revealed that the irradiated U-10wt.%Zr fuel was comprised of various major phases, including a-U, ß-U, and d-UZr2, as well as amorphous and crystalline solid fission product (FP) precipitates within different regions of the fuel cross-section. Regions A and A/B in the center of the fuel were comprised of U-rich, U-intermediate, and U-lean localities with a-U and d-UZr 2 composing the major phases. Regions B and C in the intermediate and peripheral fuel localities, respectively, were comprised of a-U grains, U-rich (ß-U) grains with Zr-rich precipitates, U-intermediate grains (d-UZr2), and solid FP precipitates. The major phases identified were associated with the nanoscopic chemical concentrations, the phase diagram, and the as-characterized specimen temperature, with the exception of the non-equilibrium ß-U phase identified in region B. The U-lean localities in regions A, A/B, B, and C were Zr-enriched pathways along subgrain/grain boundaries. This phenomenon suggests that Zr is susceptible to radiation-induced segregation in U-Zr fuels and indicates a new mechanism for constituent redistribution.

36 MATERIALS SCIENCE↗

Phase-Transformation Ductilization of Brittle High-Entropy Alloys via Metastability Engineering

High-entropy alloys (HEAs) in which interesting physical, chemical, and structural properties are being continuously revealed have recently attracted extensive attention. Body-centered cubic (bcc) HEAs, particularly those based on refractory elements are promising for high-temperature application but generally fail by early cracking with limited plasticity at room temperature, which limits their malleability and widespread uses. In this paper, the “metastability-engineering” strategy is exploited in brittle bcc HEAs via tailoring the stability of the constituent phases, and transformation-induced ductility and work-hardening capability are successfully achieved. Finally, this not only sheds new insights on the development of HEAs with excellent combination of strength and ductility, but also has great implications on overcoming the long-standing strength–ductility tradeoff of metallic materials in general.

36 MATERIALS SCIENCE↗

Characterization of phase transformation during hot compressive deformation in a β-stabilized Ti–45Al–7Nb–0.4W–0.15B alloy

A β-stabilized Ti–45Al–7Nb–0.4W–0.15B (at.%) alloy was hot deformed by uniaxial compression and the phase evolution during the compression was characterized with X-ray diffraction, scanning electron microscopy and electron probe microanalysis. The results show that modest deformation stress during hot compression restrains the γ → α transformation and the decomposition of β phase. The restrained γ → α transformation is a result of a modified equilibrium of the γ and α phases due to the applied stress, and the restrained β decomposition is a kinetic effect due to the decelerated diffusion of β-stabilizing elements caused by the compressive stress. - Highlights: • In β-stabilized TiAl alloys, hot deformation has great influence on the equilibrium of the γ, α, and β phases. • Deformation restrains the γ → α transformation. • Deformation inhibits the decomposition of the β phase.

36 MATERIALS SCIENCE↗

Effects of photointensity gradient on directional crystal growth in blends of crystalline polymer and photoreactive monomer undergoing photopolymerization-induced phase transformation

Effects of light intensity gradient on development of intricate hierarchical morphology of semicrystalline polyethylene oxide (PEO) and photoreactive diacrylate (DA) blends undergoing photopolymerization-induced crystallization have been demonstrated experimentally and theoretically. The melting temperature of PEO was found to decline upon addition of DA monomer. A solid-liquid phase diagram has been established by self-consistently solving the combined phase field free energy of crystal solidification and Flory-Huggins (FH) free energy of liquid-liquid demixing. Dynamic calculations were performed using time-dependent Ginzburg-Landau (model C) equations by incorporating the combined phase field and FH free energy densities coupled with the photopolymerization kinetics. The spatiotemporal development of gradient morphology was computed under various intensity gradient profiles including linear, cylindrical, and Gaussian profiles. The observed seaweed or dense lamellar branching morphology of the PEO/DA blend is strikingly similar to the directionally grown interface structures observed in metals driven by external thermal gradients.

36 MATERIALS SCIENCE↗

Probing Phase Transformations and Microstructural Evolutions at the Small Scales: Synchrotron X-ray Microdiffraction for Advanced Applications in [Phase 3 Memory,] 3D IC (Integrated Circuits) and Solar PV (Photovoltaic) Devices

Synchrotron x-ray microdiffraction (μXRD) allows characterization of a crystalline material in small, localized volumes. Phase composition, crystal orientation and strain can all be probed in few-second time scales. Crystalline changes over a large areas can be also probed in a reasonable amount of time with submicron spatial resolution. However, despite all the listed capabilities, μXRD is mostly used to study pure materials but its application in actual device characterization is rather limited. This article will explore the recent developments of the μXRD technique illustrated with its advanced applications in microelectronic devices and solar photovoltaic systems. Application of μXRD in microelectronics will be illustrated by studying stress and microstructure evolution in Cu TSV (through silicon via) during and after annealing. Here, the approach allowing study of the microstructural evolution in the solder joint of crystalline Si solar cells due to thermal cycling will be also demonstrated.

36 MATERIALS SCIENCE↗