Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “peak estimation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Shock ignition and deflagration growth in plastic-bonded TATB (1, 3, 5-trinitro-2, 4, 6-triaminobenzene) microstructures

TATB (1,3,5-triamino-2,4,6-trinitrobenzene) plastic-bonded explosives (PBX) were shocked with laser-launched flyer plates. The spectral radiance of the emitted light from a small portion of the microstructure (a “microenvironment”) containing a small number of TATB particles with an estimated mass of 150 ng was measured every 0.8 ns from 1 ns to 200 μs and was analyzed to give radiance and time-dependent graybody temperatures. By fabricating an array with 186 PBX charges, we could obtain ≥15 shots at each of 12 velocities between 1.8 and 4.7 km/s. We found that every microenvironment generated a unique radiance fingerprint. Some of these microenvironments were much more reactive than average. The radiance has two peaks around 20 ns and 5 μs, associated with shock ignition and deflagration growth. In our interpretation, the shock creates an ensemble of hot spots of various sizes and temperatures. Of those hot spots that ignite, only a small portion, at about 2200 K, was large enough and hot enough to survive long enough (>100 ns) to ignite individual TATB particles, leading to deflagration. Integrating various time intervals of the radiance can quantify the strength of the shock–PBX interaction, and the decay and growth of the hot spot ensemble and the deflagration.

Akhtar, Meysam (ORCID:0000000243897837)↗
DOE OSTI2023

Nucleosynthesis in outflows of compact objects and detection prospects of associated kilonovae

ABSTRACT We perform a comparative analysis of nucleosynthesis yields from binary neutron star (BNS) mergers, black hole-neutron star (BHNS) mergers, and core-collapse supernovae (CCSNe) with the goal of determining which are the most dominant sources of r-process enrichment observed in stars. We find that BNS and BHNS binaries may eject similar mass distributions of robust r-process nuclei post-merger (up to third peak and actinides, A ∼ 200−240), after accounting for the volumetric event rates. Magnetorotational (MR) CCSNe likely undergo a weak r-process (up to A ∼ 140) and contribute to the production of light element primary process (LEPP) nuclei, whereas typical thermal, neutrino-driven CCSNe only synthesize up to first r-process peak nuclei (A ∼ 80−90). We also find that the upper limit to the rate of MR CCSNe is $\lesssim 1~{{\ \rm per\ cent}}$ the rate of typical thermal CCSNe; if the rate was higher, then weak r-process nuclei would be overproduced. Although the largest uncertainty is from the volumetric event rate, the prospects are encouraging for confirming these rates in the next few years with upcoming surveys. Using a simple model to estimate the resulting kilonova light curve from mergers and our set of fiducial merger parameters, we predict that ∼7 BNS and ∼2 BHNS events will be detectable per year by the Vera C. Rubin Observatory (LSST), with prior gravitational wave (GW) triggers.

Astronomy & Astrophysics↗
DOE OSTI2024

Investigating the mixing between two black hole populations in LIGO-Virgo-KAGRA GWTC-3

Here, we introduce a population model to analyze the mixing between hypothesised power-law and ~ 35M ⊙ Gaussian bump black hole populations in the latest gravitational wave catalog, GWTC 3, estimating their co-location and separation. We find a relatively low level of mixing, $3.1^{+5.0}_{-3.1}$%, between the power-law and Gaussian populations, compared to the percentage of mergers containing two Gaussian bump black holes, $5.0^{+3.2}_{-1.7}$%. Our analysis indicates that black holes within the Gaussian bump are generally separate from the power-law population, with only a minor fraction engaging in mixing and contributing to the $\mathcal{M}$ ~ 14M ⊙ peak in the chirp mass. This leads us to identify a distinct population of Binary Gaussian Black Holes (BGBHs) that arise from mergers within the Gaussian bump. We suggest that current theories for the formation of the massive 35M ⊙ Gaussian bump population may need to reevaluate the underlying mechanisms that drive the preference for BGBHs.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

Late-time post-merger modeling of a compact binary: effects of relativity, r-process heating, and treatment of transport

Detectable electromagnetic counterparts to gravitational waves from compact binary mergers can be produced by outflows from the black hole-accretion disk remnant during the first 10 s after the merger. Two-dimensional axisymmetric simulations with effective viscosity remain an efficient and informative way to model this late-time post-merger evolution. In addition to the inherent approximations of axisymmetry and modeling turbulent angular momentum transport by a viscosity, previous simulations often make other simplifications related to the treatment of the equation of state and turbulent transport effects. In this paper, we test the effect of these modeling choices. By evolving with the same viscosity the exact post-merger initial configuration previously evolved in Newtonian viscous hydrodynamics, we find that the Newtonian treatment provides a good estimate of the disk ejecta mass but underestimates the outflow velocity. We find that the inclusion of heavy nuclei causes a notable increase in ejecta mass. An approximate inclusion of r-process effects has a comparatively smaller effect, except for its designed effect on the composition. Diffusion of composition and entropy, modeling turbulent transport effects, has the overall effect of reducing ejecta mass and giving it a speed with lower average and more tightly-peaked distribution. Also, we find significant acceleration of outflow even at distances beyond 10 000 km, so that thermal wind velocities only asymptote beyond this radius and at higher values than often reported.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Relevance of E × B drifts for particle and heat transport in divertors

Radial electric fields up to ~4 kV m –1 are observed in the boundary between the private flux region (PFR) and the scrape-off layer (SOL) driving E × B drifts between the inner and outer targets at speeds up to 2.8 km s –1 in the Tokamak à configuration variable divertor. The resulting E × B fluxes, located in a narrow region ($\Delta {\rho _\Psi } < 0.012$ in normalized radius or $\Delta $ R – R sep <4 mm mapped to the outer midplane) are equivalent to around 20% of the total heat and particle flux to the divertor targets (inner + outer). At the peak E r , the E × B poloidal transport is equivalent to parallel flows with M ∥ ~ 3. In the snowflake divertor with a second X-point in the outer SOL, the drifts in the PFR-SOL boundary were equivalent to around 30% of the total heat and particle flux to the divertor targets and cover a region ~50% wider than in the single null ($\Delta {\rho _\Psi }$ ~ 0.018, $\Delta $R – R sep ~ 6 mm). Furthermore, the location of the PFR-SOL boundary drift shifts radially in the E ∥ × B direction when reversing the toroidal field direction. Peaks in density and electron pressure have been identified near the primary X-point along with large gradients in density, temperature, and potential, the latter resulting in a local electric field ~2.7 kV m –1 which drives a drift (1.9 km s –1 ) upwards towards the closed flux surfaces. Floating potential (V f ) magnitudes up to 75 V (~2 kT e ) were measured, indicating that V f and parallel currents should not be neglected when estimating plasma potential.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Milky Way Satellite Census -- II. Galaxy-Halo Connection Constraints Including the Impact of the Large Magellanic Cloud

The population of Milky Way (MW) satellites contains the faintest known galaxies, and thus provides essential insight into galaxy formation and dark matter microphysics. Here, we combine a model of the galaxy--halo connection with newly derived observational selection functions based on searches for satellites in photometric surveys over nearly the entire high-Galactic-latitude sky. In particular, we use cosmological zoom-in simulations of MW-like halos that include realistic Large Magellanic Cloud (LMC) analogs to fit the position-dependent MW satellite luminosity function. We report decisive evidence for the statistical impact of the LMC on the MW satellite population due to an estimated $6.5\pm 1.5$ observed LMC-associated satellites, consistent with the number of LMC satellites inferred from $\textit{Gaia}$ proper motion measurements, confirming the predictions of cold dark matter models for the existence of satellites within satellite halos. Moreover, we infer that the LMC fell into the MW within the last $2\ \rm{Gyr}$ at high confidence. Based on our detailed full-sky modeling, we find that the faintest observed satellites inhabit halos with peak virial masses below $2.2\times 10^{8}\ M_{\rm{\odot}}$ at $95\%$ confidence, and we place the first robust constraints on the fraction of halos that host galaxies in this regime. We predict that the faintest detectable satellites occupy halos with peak virial masses above $10^{6}\ M_{\rm{\odot}}$, highlighting the potential for powerful galaxy formation and dark matter constraints from future dwarf galaxy searches.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Corresponding Standard Reference Material Data used in Partial Least Squares Regression Models for Sugar Composition Estimates in Biomass in: Economic Impact of Yield and Composition Variation in Bioenergy Crops: Populus trichocarpa

Corresponding Standard Reference Material Data used in Partial Least Squares Regression Models for Sugar Composition Estimates in Biomass in: Economic Impact of Yield and Composition Variation in Bioenergy Crops: Populus trichocarpa (for corresponding manuscript: DOI: 10.1002/bbb.2148) PDF Files: Images of 1H NMR spectra for neutralized 2-stage acid hydrolysates of 4 NIST Standard Reference Material biomass samples (Monterey Pine 8493, Sugarcane Bagasse 8491, Wheat Straw 8494, and Eastern Cottonwood/Poplar 8492) and 2 Center for Bioenergy Innovation reference biomass samples (Poplar - Populus trichocarpa and Switchgrass - Panicum Virgatum). Suppression of the water peak was achieved using a NOESY-1D with presaturation, a recycle delay of 5 s, and a total of 64 scans. Spectra were acquired at 298 K and processed with automatic phase correction, baseline correction, and chemical shift referencing to TSP-d4. Images show all 1H data from 10 to 1ppm with inset spectra of region of interest (4.0 to 3.1 ppm). Text Files: Spectra for neutralized 2-stage acid hydrolysates of 4 NIST Standard Reference Material biomass samples (Monterey Pine 8493, Sugarcane Bagasse 8491, Wheat Straw 8494, and Eastern Cottonwood/Poplar 8492) and 2 Center for Bioenergy Innovation reference biomass samples (Poplar - Populus trichocarpa and Switchgrass - Panicum Virgatum) were converted into text files for plotting. Files contain 8192 points of raw spectral data from 12.23 to -2.78 ppm. The text file contains 4 columns of data and includes: Point number, Intensity, Hz, and ppm. Xcel Spreadsheet: HPLC measured monomeric sugar concentrations and bucketed 1H NMR data used to build monomeric sugar composition prediction models. Sugar composition in biomass determined from HPLC analyses are given in mg sugar/mg of biomass. Spectral bucketing was performed using Bruker’s AMIX software. Spectra were divided into 0.005 ppm buckets in the region of 3.10– 4.15 ppm for a total of 210 buckets. Headers for the bucketed data are the chemical shift in ppm of the center of the bucket. Bucketed data was used to build partial least squares models for subsequent predictions in The Unscrambler v. 10.5(CAMO A/S, Trondheim, Norway). The formation of methanol during hydrolysis interferes with the quantitative NMR analysis of sugars, so the methanol peak centered at 3.37 ppm and spanning four buckets (3.2925 – 3.2775 ppm) was set to zero for all spectra.

09 BIOMASS FUELS↗
DOE OSTI2026

Local Air Quality Impacts of a Peak-Shaving Diesel Generator Unit in Waynesville, North Carolina

The Waynesville Electric Department in Waynesville, North Carolina, operates a 2,000-kW diesel generator with a 4% capacity factor, emitting less than 1 ton annually of PM2.5, VOCs, carbon monoxide (CO), and sulfur dioxide (SO2), and approximately 1.8 tons of NO. The National Laboratory of the Rockies (NLR) conducted high-resolution, near-source air-quality modeling to evaluate the generator's impacts. Results indicate minimal effects on ambient pollutant concentrations: annual PM2.5 increases are below 0.0004 microgrm/m3 for local census tracts, while CO and SO2 levels increase by less than 0.00004 ppm and 0.0002 ppb, respectively. Estimated annual premature mortality attributable to PM2.5 exposure is less than 0.001 cases across Haywood County, with an associated economic impact of approximately $12,000. This report complements a separate technoeconomic analysis to inform Waynesville's investment strategies for demand reduction.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2024

Assessment of thermal and radiation induced creep in the dual cooled lead lithium blanket

The creep in recently designed blanket for the fusion nuclear science facility is described by decomposing it into thermal, irradiation and cavity swelling creep. Initial estimates of thermal creep using elastic high temperature rules showed that the recent heat transfer improvements at the first wall (FW) is feasible, and the FW can withstand heat flux of 0.35 MW/m 2 at 3000 hrs without rupture. A viscoplastic model that is based on Norton's power law and relies on Multiphysics coupling of solid mechanics and heat transfer modules is used to capture the inelastic deformation in the blanket. Results showed that the design peak heat flux of 0.25 MW/m 2 produced maximum thermal creep strain of 0.45 % and the relaxation of the thermal stress at the FW. Irradiation creep is prescribed to be proportional to the displacement damage dose and applied stress. The displacements from irradiation creep radially decrease from the FW to the back wall, but the maximum deformation is found at the back wall that is connected to the Helium manifold due to the high stresses at the region. In conclusion, cavity swelling creep is dominant at steady state and combined with radiation creep to produce displacement of about 8 mm at the FW.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Evaluation of the absolute single-photon detection efficiency of HRPPD

Pixelated High Rate Picosecond Photon Detectors (HRPPDs) by Incom Inc. are promising photosensors for use in Ring Imaging CHerenkov (RICH) detectors, where a high gain, sub-mm position resolution and sub-100ps timing resolution are required in a single photon mode. Quantum Efficiency (QE) has been measured for the first batch of EIC HRPPDs both by Incom and EIC research groups at Jefferson Lab and Brookhaven Lab, with peak values at ∼365 nm typically exceeding 30%. Furthermore, in this study, we present a first direct measurement of Photon Detection Efficiency being equal to (17.1 ± 0.1 [stat] ± 0.3 [sys])% at 398.6 nm, for a pixel near the center of HRPPD, in a photoelectron pulse counting mode using a picosecond diode laser. HRPPD QE at the same spot and at the same wavelength was evaluated to be (24.4 ± 0.1 [stat] ± 0.3 [sys])%, leading to a Collection Efficiency estimate of (70.3 ± 1.6)%, which is consistent with the expectations.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Valued peaks: Sustainable water allocation for small hydropower plants in an era of explicit ecological needs

Optimizing hydropower operations to balance economic profitability and support functioning ecosystem services is integral to river management policy. In this article, we propose a dynamic, constrained optimization framework for small hydropower plants (SHPs) to evaluate trade-offs between economic profitability and socio-ecological requirements. Specifically, we examine the balance between short-term losses in hydropower generation and the potential for compensatory benefits in the form of revenue from recreational ecosystem services, irrespective of the direct beneficiary. Our framework integrates a fish habitat model, a hydropower optimization model, and a recreational ecosystem service estimate to evaluate different environmental flow scenarios. The optimization process gives three outflow release scenarios, informed by previous streamflow realisations (dam inflow), and designed environmental flow constraints. The framework is applied and tested for the river Kuusinkijoki in North-eastern Finland, which is a habitat for migratory brown trout and grayling populations. We show that the revenue loss due to the environmental flow constraints arises through a reduction in revenue per generated energy unit and through a reduction in turbine efficiency. Additionally, the simulation results reveal that all the designed environmental flow constraints cannot be met simultaneously. Under the environmental flow scenario with both minimum flow and flow ramping rate constraints, the annual hydropower revenue decreases by 16.5 %. An annual increase of 8 % in recreational fishing visits offsets the revenue loss. In conclusion, the developed framework provides knowledge of the costs and benefits of hydropower environmental flow constraints and guides the prioritizing process of environmental measures.

13 HYDRO ENERGY↗
DOE OSTI2023

Ly α emission in low-redshift most metal-deficient compact star-forming galaxies

ABSTRACT We present observations with the Cosmic Origins Spectrograph onboard the Hubble Space Telescope of nine most metal-deficient compact star-forming galaxies with oxygen abundances 12 + log(O/H) = 6.97–7.23, redshifts z = 0.02811–0.13320, and stellar masses M⋆ ≤ 107 M⊙. We aim to study the properties of Ly α emission in these extremely metal-deficient objects. We find that all nine galaxies are Ly α emitters (LAEs). We examine various relations between the Ly α escape fraction fesc(Ly α) and other characteristics – such as absolute UV magnitude, oxygen abundance, O32 ratio, stellar mass, Lyman-alpha luminosity, and equivalent width EW(Ly α), ionizing photon production efficiency ξion and velocity separation Vsep between the two peaks of the Ly α profile – of a large sample of LAEs, including our lowest metallicity galaxies and other objects from the literature. We find a relatively tight correlation between fesc(Ly α) and two characteristics, EW(Ly α) and Vsep, whereas no correlation is found between fesc(Ly α) and the oxygen abundance. We also find a relatively tight relation between the Ly α and LyC escape fractions. We propose to use the latter relation to estimate indirectly the escaping ionizing radiation in LAEs, when direct measurements of LyC emission are not possible. We show that the global properties of low-z LAEs are very similar to those of z > 6 galaxies. They are thus ideal local proxies for studying physical processes during the epoch of reionization of the Universe.

Izotov, Y. I. (ORCID:0000000214166082)↗
DOE OSTI2022

Variability in observed stable water isotopes in snowpack across a mountainous watershed in Colorado

In this study, isotopic information from 81 snowpits was collected over a 5-year period in a large, Colorado watershed. Data spans gradients in elevation, aspect, vegetation, and seasonal climate. They are combined with overlapping campaigns for water isotopes in precipitation and snowmelt, and a land-surface model for detailed estimates of snowfall and climate at sample locations. Snowfall isotopic inputs, describe the majority of δ18O snowpack variability. Aspect is a secondary control, with slightly more enriched conditions on east and north facing slopes. This is attributed to preservation of seasonally enriched snowfall and vapour loss in the early winter. Sublimation, expressed by decreases in snowpack d-excess in comparison to snowfall contributions, increases at low elevation and when seasonal temperature and solar radiation are high. At peak snow accumulation, post-depositional fractionation appears to occur in the top 25 ± 14% of the snowpack due to melt-freeze redistribution of lighter isotopes deeper into the snowpack and vapour loss to the atmosphere during intermittent periods of low relative humidity and high windspeed. Relative depth of fractionation increases when winter daytime temperatures are high and winter precipitation is low. Once isothermal, snowpack isotopic homogenization and enrichment was observed with initial snowmelt isotopically depleted in comparison to snowpack and enriching over time. The rate of δ18O increase (d-excess decrease) in snowmelt was 0.02‰ per day per 100-m elevation loss. Isotopic data suggests elevation dictates snowpack and snowmelt evolution by controlling early snow persistence (or absence), isotopic lapse rates in precipitation and the ratio of energy to snow availability. Hydrologic tracer studies using stable water isotopes in basins of large topographic relief will require adjustment for these elevational controls to properly constrain stream water sourcing from snowmelt.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Electromagnetic shower reconstruction and energy validation with Michel electrons and π 0 samples for the deep-learning-based analyses in MicroBooNE

This article presents the reconstruction of the electromagnetic activity from electrons and photons (showers) used in the MicroBooNE deep learning-based low energy electron search. The reconstruction algorithm uses a combination of traditional and deep learning-based techniques to estimate shower energies. We validate these predictions using two v μ -sourced data samples: charged/neutral current interactions with final state neutral pions and charged current interactions in which the muon stops and decays within the detector producing a Michel electron. Both the neutral pion sample and Michel electron sample demonstrate agreement between data and simulation. Finally, the absolute shower energy scale is shown to be consistent with the relevant physical constant of each sample: the neutral pion mass peak and the Michel energy cutoff.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

Semi-Supervised Disaggregation of Load Profiles at Transmission Buses with Significant Behind-the-Meter Solar Generations

It is of imperative interests for regional transmission organizations (RTOs) to effectively extract daily load profiles at transmission buses, which remains a gap in existing technology paradigm. This digest proposes an explicit yet efficient linear estimator, to disaggregate metered load profiles at buses with significant behind-the-meter (BTM) solar generations in a data driven manner. The proposed estimator is based on utility zonal load profiles and proxy solar irradiance profiles, which in reality is the aggregated waveform at each transmission bus and equivalent to the mix of summed load profiles minus actual BTM solar generation. To overcome technical challenges in the lack of “ground truth” and validate the performance of supervised learning algorithms, we propose semi-supervised mechanisms with parameter tuning, and leverage the unique characteristics of zero-crossing points in BTM solar peaking behaviors.

machine leaning, behind-the-meter, power grid anal↗
DOE OSTI2020

A data-driven approach to sampling matrix selection for compressive sensing

Sampling is a fundamental aspect of any implementation of compressive sensing. Typically, the choice of sampling method is guided by the reconstruction basis. However, this approach can be problematic with respect to certain hardware constraints and is not responsive to domain-specific context. We propose a method for defining an order for a sampling basis that is optimal with respect to capturing variance in data, thus allowing for meaningful sensing at any desired level of compression. We focus on the Walsh-Hadamard sampling basis for its relevance to hardware constraints, but our approach applies to any sampling basis of interest. We illustrate the effectiveness of our method on the Physical Sciences Inc. Fabry-Perot interferometer sensor multispectral dataset, the Johns Hopkins Applied Physics Lab FTIR-based longwave infrared sensor hyperspectral dataset, and a Colorado State University Swiss Ranger depth image dataset. The spectral datasets consist of simulant experiments, including releases of chemicals such as GAA and SF6. We combine our sampling and reconstruction with the adaptive coherence estimator (ACE) and bulk coherence for chemical detection and we incorporate an algorithmic threshold for ACE values to determine the presence or absence of a chemical. We compare results across sampling methods in this context. We have successful chemical detection at a compression rate of 90%. For all three datasets, we compare our sampling approach to standard orderings of sampling basis such as random, sequency, and an analog of sequency that we term `frequency.' In one instance, the peak signal to noise ratio was improved by over 30% across a test set of depth images.

compressive sensing, hyperspectral imaging, Walsh-↗
DOE OSTI2026

Scaled Implementation of Smart Charge Management for Electric Vehicles

Smart charge management (SCM) has become a critical strategy for mitigating potential grid impacts and reducing electricity costs for all customers. This study will evaluate the economics of implementing light-duty EV SCM at scale across the United States. This work will enhance distribution system analysis by estimating SCM implementation costs, exploring viable business cases, and developing a framework for national-level applications. The primary methodology involves leveraging detailed grid modeling from a specific service territory and using spatial extrapolation techniques to generalize findings to other regions. The analysis will develop key metrics to quantify the costs and benefits of SCM, including implementation costs relative to strategy and scale, the cost of distribution system upgrades with and without SCM, and the percentage of peak-load reduction. The objective is to produce a comprehensive report and a parameterized framework that enables utilities to self-assess the value of SCM in their own service territories. This will support the development of cost-effective charging strategies, accelerate the energization of new EV chargers, and facilitate the seamless integration of EVs into the nation's power grid.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2021

Effects of magnetic fields on HPGe tracking detectors

Here, we present a study of magnetic fields effects on the position resolution and energy response of hyper-pure germanium detectors. Our results provide realistic estimates of the potential impact on the resolving power of tracking-arrays from (fringe) magnetic fields present when operating together with large spectrometers. By solving the equations of motion for the electron and holes in the presence of both electric and magnetic fields, we analyzed the drift trajectories of the charge carriers to determine the deviations in the positions at the end point of the trajectories, as well as changes in drift lengths affecting the energy resolution and peak shift due to trapping. Our results show that the major effect is in the deviation of the transverse (to the electric field direction) position and suggest that, if no corrective action is taken in the pulse-shape and tracking data analysis procedures, a field strength ≳ 0.1 T will start to impact the intrinsic position resolution of 2 mm (RMS). At fields above ~1 T, the degradation of the energy response becomes observable.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗