Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “out of memory”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Ion beam etching dependence of spin-orbit torque memory devices with switching current densities reduced by Hf interlayers

We report on the fabrication of nanoscale, three-terminal in-plane spin–orbit torque switching devices with low switching current densities. Critical parameters in the fabrication process, including the ion beam etching angle and time, were optimized to avoid fabrication defects and improve device yield. Measurements of the magnetic field and current-induced switching behavior of the tunnel junctions demonstrate a sensitivity to the nanopillar aspect ratio, which dictates the nanopillars’ anisotropy and thermal stability. Additionally, we show that the current density required for switching can be reduced and the device thermal stability increased by inserting Hf interlayers into the heterostructure. Micromagnetic simulations are generally consistent with the experimentally observed switching behavior, suggesting an increase in the interfacial perpendicular anisotropy at the CoFeB/MgO interface and the reduction in the Dzyaloshinskii–Moriya interaction at the W/CoFeB interface by the Hf interlayers.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Two–Photon Polymerized Shape Memory Microfibers: A New Mechanical Characterization Method in Liquid

Two-photon polymerization (TPP) is widely used to create 3D micro- and nanoscale scaffolds for biological and mechanobiological studies, which often require the mechanical characterization of the TPP fabricated structures. To satisfy physiological requirements, most of the mechanical characterizations need to be conducted in liquid. However, previous characterizations of TPP fabricated structures are all conducted in air due to the limitation of conventional micro- and nanoscale mechanical testing methods. In this study, a new experimental method is reported for testing the mechanical properties of TPP-printed microfibers in liquid. The experiments show that the mechanical behaviors of the microfibers tested in liquid are significantly different from those tested in air. By controlling the TPP writing parameters, the mechanical properties of the microfibers can be tailored over a wide range to meet a variety of mechanobiology applications. In addition, it is found that, in water, the plasticly deformed microfibers can return to their predeformed shape after tensile strain is released. The shape recovery time is dependent on the size of microfibers. The experimental method represents a significant advancement in mechanical testing of TPP fabricated structures and may help release the full potential of TPP fabricated 3D tissue scaffolds for mechanobiological studies.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Switching current reduction in magnetoresistive random access memories

We present an approach for minimizing the critical current for the magnetization switching in magnetic tunnel junctions by optimizing the spatial distribution of the current density. We show that such a minimization is possible because critical current is determined by the condition of making one of the magnetization eigenstates grow in time. The excitation of the eigenstates is enhanced when the spatial distributions of the eigenstates and current density overlap. Critical current can be viewed as a functional of the current density spatial distribution and it can be minimized by optimizing this distribution. Such an optimization results in a major reduction of the critical current and increase of the switching efficiency, viz. the ratio between the energy barrier and critical current. The minimized critical current increases approximately linearly with the magnetic tunnel junction size, which is much slower than critical current for the case of a uniform current density. The optimized efficiency can be approximately a constant with respect to the magnetic tunnel junction size, which is much higher than the efficiency for the uniform current density. Additional optimization can be achieved by spatially modulating the material parameters, e.g., the saturation magnetization. The presented approach and obtained scaling of the critical current and efficiency offers opportunities for the magnetic tunnel junction optimization.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Resistance drift in Ge 2 Sb 2 Te 5 phase change memory line cells at low temperatures and its response to photoexcitation

Resistance drift in amorphous Ge 2 Sb 2 Te 5 is experimentally characterized in melt-quenched line cells in the range of 300 K to 125 K and is observed to follow the previously reported power-law behavior with drift coefficients in the range of 0.07 to 0.11 in the dark, linearly decreasing with 1/kT. While these drift coefficients measured in the dark are similar to commonly observed drift coefficients (~0.1) at and above room temperature, measurements under light show a significantly lower drift coefficient (0.05 under illumination vs 0.09 in the dark at 150 K). Periodic on/off switching of light shows a sudden decrease/increase in resistance, attributed to photo-excited carriers, followed by a very slow response (~30 min at 150 K) attributed to contribution of electron traps and slow trap-to-trap charge exchanges. A device-level electronic model is used to relate these experimental findings to gradual charging of electron traps in amorphous Ge 2 Sb 2 Te 5 , which gives rise to growth of a potential barrier for holes in time and, hence, resistance drift.

42 ENGINEERING↗
DOE OSTI2020

Stacking faults and alternate crystal structures for the shape-memory alloy NiTi

Here, we use ab initio calculations to study the role of stacking faults in connecting the high-temperature B2 and the theoretically predicted low-temperature B33 NiTi phases. In contrast with prior work, we describe the B 2 → B 33 phase transformation in terms of alternate bilayer shifts by 1 2 [100] on the ( 011 ) B 2 plane, obtaining a viable pathway; the same mechanism could also work with the B19 parent phase. We then examine B33-like structures built from alternate stacking sequences of B19 bilayers, constructed to have monoclinic tilt angles close to the experimentally reported NiTi B19' martensite, and find four low-energy stacking-fault variants with energies 5.8–8.5 meV/atom above the calculated B19' martensite structure, suggesting that such structures might appear as a part of the NiTi martensite phase at low temperatures. Investigating further the occurrence of specific coordinated planar shifts in NiTi systems, we report a dynamically stable NiTi B27 phase and find that it is only 1.2 meV/atom above the calculated B33 ground-state structure, thus having a potential to also play a role in NiTi martensitic phase transformation.

36 MATERIALS SCIENCE↗