SEARCH · Engineering Papers

Results for “multiscale modeling and simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

All sources NASA NTRS DOE OSTI

DOE OSTI2020

Determining the Length Scale of Transport Impedances in Li-Ion Electrodes: Li(Ni 0.33 Mn 0.33 Co 0.33 )O 2

Battery cathodes are complex multiscale, multifunctional materials. The length scale at which the dominant impedance arises may be difficult to determine even with the most advanced experimental characterization efforts, and thus modeling can play an important role in analysis. Discharge and voltage relaxation curves, interrogated with theory, are used to distinguish between transport impedance that arise on the scale of the active crystal and on the scale of agglomerates (secondary particles) comprised of nanoscale crystals. Model-selection algorithms are applied to determine that the agglomerate scale is dominant in the Li Ni 0.33 Mn 0.33 Co 0.33 O 2 electrode studied here. Furthermore, conditions where the agglomerate and crystal-scale models yield distinct simulation results are demonstrated, providing approaches that can be applied to other systems.

25 ENERGY STORAGE↗

DOE OSTI2020

Multiscale modeling of shear banding in metallic glasses (Final report)

Metallic glasses (MGs) possess remarkably high strength but suffer from minimal tensile ductility due to the formation of catastrophic shear bands. The goal of this research project is to develop an understanding of the microstructures and deformation mechanisms that control shear banding in MGs, which will enable the development of MGs with enhanced plasticity. Two scientific objectives have been pursued. (1) Understand the underlying mechanisms of shear banding phenomena in presence of nanoscale heterogeneities in MGs. (2) Understand the evolution of MG heterogenous structure upon thermomechanical stimuli for plasticity enhancement through controlling and distributing multiple shear bands.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Multiscale modeling and nonlinear model predictive control for flue gas desulfurization

The primary source of sulfur dioxide (SO 2 ) emissions is flue gas from fossil fuels-based power plants. SO 2 emissions are known to not only cause health issues, but also have an adverse effect on the environment in various ways. Several Flue Gas Desulfurization (FGD) technologies have been incorporated in power plants. The most popular technology is Wet FGD, where a limestone slurry is used to absorb SO 2 from the flue gas. A detailed droplet scale model describing the instantaneous and finite rate chemistry is developed. The ill-posed Differential-Algebraic Equation (DAE) droplet model is reformulated to a well-posed index-1 DAE through index reduction. The droplet model is integrated with the bulk phase by incorporating gas-liquid mass transfer, and an oxidation reactor model to simulate the dynamic operation of the counter-current spray scrubber. As a result, the model has a well-conditioned Jacobian and overcomes the modeling challenges of previous works and enables numerical solution without requiring carefully selected initialization or specialized solution procedures. The model is successfully validated using power plant measurements, and nonlinear model predictive control (NMPC) studies are demonstrated to optimize recycle stream flowrates to minimize pumping costs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2025

Influences of shock imprinting on mix in a 3D-printed porous media

Mixing of materials in porous media can cause a significant impact on fusion yield as previously demonstrated by the National Ignition Facility (NIF) MARBLE Campaign. Initially, the reactants are separated, with deuterium in the lattice struts and a tritium gas fill in the voids. Lattice parameters such as the strut thickness and relative pitch, provide a control for the mix parameters in the experiment. Los Alamos National Laboratory’s (LANL) BOSQUE project looks to better understand how the mix of the reactants and shell materials impact the fusion burn and resultant yield on various laser platforms. xRAGE’s Eulerian hydrodynamics and adaptive mesh refinement (AMR) provide the unique ability to study the impacts of multiscale features of complex lattice structures. This modeling provides the ability to measure shock front variations as the wave progress’ through a given media. Initial conditions of the lattice are essential to accurately model mix and burn measured by experiment. By varying the initial orientation and densities of these lattice regions the early time dynamics of how the shock is launched into the system is changed and advocates for the study of resulting effects. In this work, we will study the sensitivities of shock effects in varying 3D printed geometric systems and how these shocks alter the structure and mix in the lattice. We will discuss both preliminary experimental results and simulations to help plan and constrain future experiments where we will study the impact of different lattice geometries and lattice bulk densities. This work concludes with the relative impacts of lattice geometries on shock speeds at different bulk densities and the resultant mix widths due to those shock interactions. We see agreement with theory at the higher end of our bulk density study, however, as we approach lower bulk density systems the dynamics of these interactions begin to change.

2 Photon Polymerization↗

DOE OSTI2022

Scalable algorithms for physics-informed neural and graph networks

Physics-informed machine learning (PIML) has emerged as a promising new approach for simulating complex physical and biological systems that are governed by complex multiscale processes for which some data are also available. In some instances, the objective is to discover part of the hidden physics from the available data, and PIML has been shown to be particularly effective for such problems for which conventional methods may fail. Unlike commercial machine learning where training of deep neural networks requires big data, in PIML big data are not available. Instead, we can train such networks from additional information obtained by employing the physical laws and evaluating them at random points in the space–time domain. Such PIML integrates multimodality and multifidelity data with mathematical models, and implements them using neural networks or graph networks. Here, we review some of the prevailing trends in embedding physics into machine learning, using physics-informed neural networks (PINNs) based primarily on feed-forward neural networks and automatic differentiation. For more complex systems or systems of systems and unstructured data, graph neural networks (GNNs) present some distinct advantages, and here we review how physics-informed learning can be accomplished with GNNs based on graph exterior calculus to construct differential operators; we refer to these architectures as physics-informed graph networks (PIGNs). We present representative examples for both forward and inverse problems and discuss what advances are needed to scale up PINNs, PIGNs and more broadly GNNs for large-scale engineering problems.

42 ENGINEERING↗

DOE OSTI2020

A multiscale approach to analyze the effect of radial void fraction distributions on BWR neutronic lattice parameters

The goal of this study is to analyze the effect of radial void fraction distribution, considered at three degrees of fidelity, on lattice and 2-group homogenized cross sections. The novelty of this work lies in its use of experimentally-determined radial void fraction distributions which allows for fine-scale coolant density data with no predictive uncertainty and which could be prohibitively expensive to simulate over the range of operational parameters used in the experiments. The experimentally-determined radial void fraction distributions are also characterized using a statistical tool called a semi-variogram in order to determine the scale of continuity. Void fraction distributions are averaged at the lattice and subchannel level for comparison with the fine-scale model. Models averaged at the subchannel and lattice level show a difference in about 68% of the time. Also, by comparing 2-group homogenized cross-sections, the differences between the subchannel and homogeneous cases are measurable.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2023

The Role of Topography in Controlling Evapotranspiration Age

Abstract Evapotranspiration (ET) age is a key metric of water sustainability but a major unknown partly due to the extreme difficulty in modeling it. Groundwater is found to be important in ET age variations in small‐scale studies, yet our understanding is insufficient because groundwater systems are nested across scales. Here, we conducted GPU‐accelerated particle tracking with integrated hydrologic modeling to quantify the variations in ET age at a regional scale of ∼0.4 M km 2 . Simulation results reveal topography‐driven flow paths shaping the spatial and temporal patterns of ET age variations. On ridges, where root zone decoupling with deep subsurface storage, ET age is generally young, with seasonal variations dominated by meteorological conditions. In the valley bottom, ET age is generally old, with significant subseasonal variations caused by the convergence of subsurface flow paths. On hillslopes with water table depths ranging from 1 to 10 m, ET age shows strong seasonal variations caused by the connections with lateral groundwater regulated by ET demand. Our modeling approach provides insights into the basic linkages between ET age and topography at large scale. Our work highlights the perspective of multiscale studies of ET age, suggesting new field experiments to test these process connections and to determine if such linkages warrant inclusion in Earth System Models.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2021

Empirical validation and comparison of methodologies to simulate micro and macro-encapsulated PCMs in the building envelope

Thermal Energy Storage (TES) has the potential to shift peak electricity demand. Passive TES is usually implemented in building envelope as micro and macro encapsulated phase change materials (PCM) to shift electric energy demand and therefore requires careful heat transfer analysis. Whole building energy modelling with simplified heat transfer analysis has become extremely important for designers, architects, engineers, and researchers to predict energy performance of buildings. It is important to validate PCM modelling algorithms used in building energy programs to quantify their error and prove their capacity to model different PCM encapsulation types. This study uses data from a microencapsulated PCM and two macroencapsulated PCMs (Bio based PCM and hydrate salts) tested in full-scale using the Advanced Multiscale Building Energy Research (AMBER) Lab located at the Colorado School of Mines and is used to validate a numerical algorithm written in MATLAB language. To approximate the heat transfer through a wall assembly with macroencapsulated PCM pouches, several modelling techniques that can reduce 3D heat transfer characteristics to 1D are explored in this research. A parallel path heat transfer modelling approach is found to give the closest agreement with the experimental data for the pouched PCMs in building envelope applications.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

DOE OSTI2023

WRF Output from 270m domain running simulation with no 3D morphology, NUDAPT 3D morphology, 100m resolution 3D morphology and 10m resolution 3D morphology

This is a group of four datasets that were run for an experiment testing the effect of the resolution and the coverage of 3D urban morphological inputs on meteorological output. This data is associated with the paper "Sensitivity of Urban Morphology to the Resolution of Urban Morphological Feature Inputs: Implications for Characterizing Urban Sustainability."

integrated multisector multiscale modeling↗

DOE OSTI2024

WRF Output from 270m domain running simulation with no 3D morphology, NUDAPT 3D morphology, 100m resolution 3D morphology and 10m resolution 3D morphology

integrated multisector multiscale modeling↗

DOE OSTI2023

MAS: A versatile Landau-fluid eigenvalue code for plasma stability analysis in general geometry

We have developed a new global eigenvalue code, Multiscale Analysis for plasma Stabilities (MAS), for studying plasma problems with wave toroidal mode number (n) and frequency (ω) in a broad range of interest in general tokamak geometry, based on a five-field Landau-fluid description of thermal plasmas. Beyond keeping the necessary plasma fluid response, we further retain the important kinetic effects including diamagnetic drift, ion finite Larmor radius, finite parallel electric field (E||), ion and electron Landau resonances in a self-consistent and non-perturbative manner without sacrificing the attractive efficiency in computation. The physical capabilities of the code are evaluated and examined in the aspects of both theory and simulation. In theory, the comprehensive Landau-fluid model implemented in MAS can be reduced to the well-known ideal MHD model, electrostatic ion-fluid model, and drift-kinetic model in various limits, which clearly delineates the physics validity regime. In simulation, MAS has been well benchmarked with theory and other gyrokinetic and kinetic-MHD hybrid codes in a manner of adopting the unified physical and numerical framework, which covers the kinetic Alfv\'en wave (KAW), ion sound wave (ISW), low-n kink, high-n ion temperature gradient mode (ITG) and kinetic ballooning mode (KBM). Moreover, MAS is successfully applied to model the Alfv\'en eigenmode (AE) activities in DIII-D discharge #159243, which faithfully captures the frequency sweeping of reversed shear Alfv\'en eigenmode (RSAE), the tunneling damping of toroidal Alfv\'en eigenmode (TAE), as well as the polarization characteristics of kinetic beta-induced Alfv\'en eigenmode (KBAE) and beta-induced Alfv\'en-acoustic eigenmode (BAAE) being consistent with former gyrokinetic theory and simulation. With respect to the key progress contributed to the community, MAS has the advantage of combining rich physics ingredients, realistic global geometry and high computation efficiency together for plasma stability analysis in linear regime.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2021

Modeling the Nonlinear Rheology of Polymer Additive Manufacturing

This report summarizes molecular and continuum simulation studies focused on developing physics - based predictive models for the evolution of polymer molecular order during the nonlinear processing flows of additive manufacturing. Our molecular simulations of polymer elongation flows identified novel mechanisms of fluid dissipation for various polymer architectures that might be harnessed to enhance material processability. In order to predict the complex thermal and flow history of polymer realistic additive manufacturing processes, we have developed and deployed a high - performance mesh - free hydrodynamics module in Sandia's LAMMPS software. This module called RHEO – short for Reproducing Hydrodynamics and Elastic Objects – hybridizes an updated - Lagrange reproducing - kernel method for complex fluids with a bonded particle method (BPM) to capture solidification and solid objects in multiphase flows. In combination, our two methods allow rapid, multiscale characterization of the hydrodynamics and molecular evolution of polymers in realistic processing geometries.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Clustering of inertial particles in turbulent flow through a porous unit cell

We report direct numerical simulation is used to investigate effects of turbulent flow in the confined geometry of a face-centred cubic porous unit cell on the transport, clustering and deposition of fine particles at different Stokes numbers (St = 0.01, 0.1, 0.5, 1, 2) and at a pore Reynolds number of 500. Particles are advanced using one-way coupling and the collision of particles with pore walls is modelled as perfectly elastic with specular reflection. Tools for studying inertial particle dynamics and clustering developed for homogeneous flows are adapted to take into account the embedded, curved geometry of the pore walls. The pattern and dynamics of clustering are investigated using the volume change of Voronoi tesselation in time to analyse the divergence and convergence of the particles. Similar to the case of homogeneous, isotropic turbulence, the cluster formation is present at large volumes, while cluster destruction is prominent at small volumes and these effects are amplified with the Stokes number. However, unlike homogeneous, isotropic turbulence, the formation of a large number of very small volumes was observed at all Stokes numbers and attributed to the collision of particles with the pore wall. Multiscale wavelet analysis of the particle number density indicates that the peak of the energy density spectrum, representative of enhanced particle clustering, shifts towards larger scales with an increase in the Stokes number. Scale-dependent skewness and flatness quantify the intermittent void and cluster distribution, with cluster formation observed at small scales for all Stokes numbers, and void regions at large scales for large Stokes numbers.

42 ENGINEERING↗

DOE OSTI2021

Toward more mechanistic representations of biogeochemical processes in stream and river networks: Implementation and demonstration of a multiscale model : Modeling Archive

This Modeling Archive supports the ORNL-SFA and IDEAS-Waterhsed publication submitted to Environmental Modeling and Software. A recently introduced multiscale model for representing the combined effect of hyporheic exchange flows and small-scale hyporheic-zone biogeochemical processes is extended from the reach scale to river network scales. The ADELS (Advection Dispersion Equation with Lagrangian Subgrid) model uses a one-dimensional advection-dispersion-reaction equation for the channel network and couples that equation at each channel location to a one-dimensional advection-reaction subgrid model representing an ensemble of streamlines that are diverted into the hyporheic zone before returning to the channel. The subgrid model is written in a computationally advantageous Lagrangian form with hyporheic age replacing the hyporheic travel distance. In the paper, we summarized implementation in the integrated surface/subsurface hydrology modeling system Advanced Terrestrial Simulator (ATS).

East Fork Poplar Creek↗

DOE OSTI2022

Demonstrate Improved Ag Diffusion and Describe the Basis for Pd Penetration Modeling in SiC

In past work, an effective diffusivity coefficient was determined for Ag transport through the silicon carbide layer of a tristructural isotropic fuel particle. The effective diffusivity coefficient accounts for the microstructure of the silicon carbide and includes both bulk diffusion and grain boundary diffusion of Ag. In this report, the model has been improved by accounting for the enhanced concentration of vacancies in the bulk due to irradiation, which substantially influence bulk diffusivity at low temperatures. To improve the BISON model and make it fission rate dependent, effective diffusivity calculations have been performed that incorporate the radiation modified bulk diffusivity. The microstructure and irradiation-dependent effective diffusivity has also been implemented into BISON, and its predictions for Ag release from tristructural isotropic fuel have been successfully compared to AGR-1 post irradiation measurements. Moreover, a new feature has been developed in the Multiphysics Object-Oriented Simulation Environment (MOOSE) to account for different grain boundary types. The Ag diffusivity in 5 (210)/[001] grain boundaries has been computed and was found to be greater than in random high-angle grain boundaries. The presence of the fission product Pd can also have an important effect on the properties of the silicon carbide layer in tristructural isotropic particles. The penetration of Pd into the silicon carbide layer causes a corrosion reaction that can lead to the failure of the silicon carbide layer; however, this corrosion reaction is not well understood. To enable an improved understanding of the mechanism, ab-initio molecular dynamics simulations of Pd interaction with bulk silicon carbide have been performed. The improved understanding of the reaction will form a basis for future improvements to the BISON’s Pd penetration failure model

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2022

Anisotropic yield models for lattice unit cell structures exploiting orthotropic symmetry

We report numerical homogenization enables efficient computational analysis and design of multiscale structures made of micro-architected materials including lattice unit cells. However, predicting yield is nontrivial because it requires accurate and efficient predictions of the maximum stress inside the homogenized unit cells. To address this challenge, we develop a macroscale anisotropic yield function for micro-architected materials. The yield function depends on the three-dimensional macroscale stress state and the parameters describing a family of micro-architectures, such as the radii of the struts in a lattice unit cell. To ensure accuracy, we determine the maximum stress using three-dimensional continuum finite-element analysis. To ensure efficiency, we construct surrogate models from the aforementioned high-fidelity results for yield prediction. To reduce simulation costs and surrogate modeling complexity, we leverage orthotropic symmetry commonly found in lattice unit cells. In this paper, we provide a thorough presentation of group representations and the systematic procedure to exploit orthotropic domain symmetry in homogenization and surrogate modeling. We illustrate the use of linear homogenization results to predict yield in specific unit cells without further simulations. We furthermore show that surrogate modeling presents a viable option for anisotropic yield prediction in a continuously parametrized family of micro-architectures. More specifically, despite the dimensionality and degree of nonlinearity in the maximum micro von Mises stress within the unit cell, the surrogate models can predict it with less than 5% error at least 90% of the time. Moreover, the largest under-prediction error, which is more critical than the over-prediction error, is typically less than 10%.

42 ENGINEERING↗

DOE OSTI2024

VOTCA: multiscale frameworks for quantum and classical simulations in soft matter

Many physical phenomena in liquids and soft matter are multiscale by nature and can involve processes with quantum and classical degrees of freedom occurring over a vast range of length- and timescales. Examples range from structure formation processes of complex polymers or even polymer blends (Svaneborg & Everaers, 2023) on the classical side to charge and energy transport and conversion processes (Lee et al., 2019) involving explicit electronic and, therefore, quantum information. The Versatile Object-oriented Toolkit for Coarse-graining Applications (VOTCA) provides multiscale frameworks built on a comprehensive set of methods for the development of classical coarse-grained potentials (VOTCA-CSG) as well as state-of-the art excited state electronic structure methods based on density-functional and many-body Green’s function theories, coupled in mixed quantum-classical models and used in kinetic network models (VOTCA-XTP).

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2025

Macro-micro multiscale modeling to assist the design of HPDC Al castings microstructure and alloys for EV super-large body structures (Phase 1)

Implementation of High Pressure Die Casting (HPDC) Aluminum (Al) body structures for high volume electrified vehicles (EV) to improve electric efficiency remains a key strategy within many original equipment manufacturer (OEM)s. In addition to high strength for safety requirements, superior Self-Piercing Riveting (SPR) performance is demanded for HPDC Al alloys to be compatible with high volume SPR joining. In this work, it is proposed to extend and validate an existing Contractor finite element multiscale macro-micro modeling approach to quantify the influence of the microstructure of HPDC alloys on the fracture strain/displacement under 3-point bend and clinch testing. The success of this work will allow to replace solution treatment stage with low energy consumption heat treatment (HT) processes, or to design new non heat treatable (NHT) HPDC Al alloys to eliminate HT requirements. Ultimately, this project will facilitate the application of HPDC Al alloys for super-large vehicle structures to significantly reduce vehicle weight, and thus improving energy efficiency. The purpose of this project is to extend and validate an existing finite element code, which is based on the Contractor developed macro-micro multi-scale modeling approach, to numerically simulate the three-point bending and clinch test and study the influences of material microstructural characteristics and phase properties on the rivetability. The macro-micro modeling approach begins with a sample scale model and identify the location, which is mostly prone to failure, the deformation history of the boundaries of that location calculated will be used to drive a microstructure-based sub-models where the material microstructure and microscale properties are considered. Using this approach, the wrap-bending failure for two Al alloys are correctly predicted for the first time. This will start with phase I effort of building a framework of macro-micro three point bending test and clinch test of Al10SiMgMn HPDC alloy in the as-cast and T7 heat treated conditions. Those results will then be validated with experimental test results. The phase II effort will involve the utilization of the knowledge learned in phase I to establish the quantitative correlation between the microstructure characteristics and the riveting performance, which will be further used to guide the optimization of HPDC Al alloy microstructure using heat treatment process to achieve sufficient rivetability to join large thin-wall HPDC alloys.

36 MATERIALS SCIENCE↗