Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “model comparison”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27
All sourcesNASA NTRSDOE OSTI
NASA NTRS1988

Stratospheric responses to solar ultraviolet variations - Comparisons with photochemical models

At latitudes and altitudes where transport effects on ozone mixing ratio can be neglected, ozone and temperature responses to short-term changes in solar ultraviolet flux can be used to calculate implied bounds on two basic photochemical parameters: the odd oxygen photochemical relaxation time and the chemical sensitivity of odd oxygen to local temperature changes. Seasonally averaged values of these parameters are derived from response measurements and are compared with model calculations between 0.7 and 4 mbar at tropical latitudes. Results are in agreement within measurement and model uncertainties at all pressure levels. Model values of mean ozone and of the response of ozone to perturbations are functions of the same photochemical data. Therefore this agreement provides a constraint which should be considered when changes are proposed in model input data for the purpose of improving agreement between measured and calculated high-altitude ozone.

Hood, L. L.↗
NASA NTRS1989

Results from baseline tests of the SPRE 1 and comparison with code model predictions

The space power research engine (SPRE), a free piston Stirling engine with linear alternator, is being tested at NASA-Lewis as a candidate for high capacity space power. Results are presented of baseline engine tests at design and off-design operating conditions. The test results are compared with code model prediction.

Cairelli, James E.↗
NASA NTRS1989

A critical comparison of turbulence models for homogeneous shear flows in a rotating frame

A variety of turbulence models, including five second-order closure models and four two equation models, are tested for the problem of homogeneous turbulent shear flow in a rotating frame. The model predictions for the time evolution of the turbulent kinetic energy and dissipation rate, as well as those for the equilibrium states, are compared with the results of physical and numerical experiments. Most of the two-equation models predict the same results for all rotation rates (omega/S) in which there is an exponential time growth of the turbulent kinetic energy and dissipation rate. The second-order closures are qualitatively superior since, consistent with physical and numerical experiments, they only predict this type of unstable flow for intermediate rotation rates in the range -0.1 less than or equal to omega/S less than or equal to 1.6. For rotation rates outside this range, there is an exchange of stabilities with a solution whose kinetic energy and dissipation rate decay with time. Although the second-order closures are superior to the two-equation models, there are still problems with the quantitative accuracy of their predictions.

Speziale, Charles G.↗
NASA NTRS1989

A critical comparison of turbulence models for homogeneous shear flows in a rotating frame

A variety of turbulence models, including five second-order closure models and four two equation models, are tested for the problem of homogeneous turbulent shear flow in a rotating frame. The model predictions for the time evolution of the turbulent kinetic energy and dissipation rate, as well as those for the equilibrium states, are compared with the results of physical and numerical experiments. Most of the two-equation models predict the same results for all rotation rates (omega/S) in which there is an exponential time growth of the turbulent kinetic energy and dissipation rate. The second-order closures are qualitatively superior since, consistent with physical and numerical experiments, they only predict this type of unstable flow for intermediate rotation rates in the range -0.1 less than or equal to omega/S less than or equal to 1.6. For rotation rates outside this range, there is an exchange of stabilities with a solution whose kinetic energy and dissipation rate decay with time. Although the second-order closures are superior to the two-equation models, there are still problems with the quantitative accuracy of thier predictions.

Speziale, Charles G.↗
NASA NTRS1990

Comparison between analytical models and finite-difference simulations in transmission-line tap resistors and L-type cross-Kelvin resistors

Approximate analytical models of the transmission-line tap resistor and the cross-Kelvin resistor are compared with computer-simulated pseudo-three-dimensional resistor network models. The analytical formulas are in good agreement with the simulations over a useful range of parameters and are readily applied to the extraction of the contact resistivity and the sheet resistances of the semiconducting layer under and outside the contacts. The extraction procedure, which is easily implemented on a personal computer, is carried out for the case of alloyed AuGeNi/GaAs contacts, illustrating the importance of (1) distinguishing between layer sheet resistance under and outside the contacts and (2) considering two-dimensional current flow in the semiconducting layer.

Scorzoni, Andrea↗
NASA NTRS1989

Results from baseline tests of the SPRE I and comparison with code model predictions

The space power research engine (SPRE), a free-piston Stirling engine with linear alternator, is being tested at NASA-Lewis as a candidate for high capacity space power. Results are presented of baseline engine tests at design and off-design operating conditions. The test results are compared with code model prediction.

Cairelli, James E.↗
NASA NTRS1990

A critical comparison of turbulence models for homogeneous shear flows in a rotating frame

A variety of turbulence models, including five second-order closure models and four two equation models, are tested for the problem of homogeneous turbulent shear flow in a rotating frame. The model predictions for the time evolution of the turbulent kinetic energy and dissipation rate, as well as those for the equilibrium states, are compared with the results of physical and numerical experiments. Most of the two-equation models predict the same results for all rotation rates (omega/S) in which there is an exponential time growth of the turbulent kinetic energy and dissipation rate. The second-order closures are qualitatively superior since, consistent with physical and numerical experiments, they only predict this type of unstable flow for intermediate rotation rates in the range -0.1 less than or equal to omega/S less than or equal to 1.6. For rotation rates outside this range, there is an exchange of stabilities with a solution whose kinetic energy and dissipation rate decay with time. Although the second-order closures are superior to the two-equation models, there are still problems with the quantitative accuracy of their predictions.

Speziale, Charles G.↗
NASA NTRS1990

A comparison of different models for beam vibrations from the standpoint of control design

Different models for beam vibrations are analyzed from the standpoint of designing finite-dimensional controllers to stabilize the beam vibrations. A distributed system described by an undamped Euler-Bernoulli equation cannot be stabilized by any finite-dimensional controller, i.e., any controller which can be described an ordinary differential equation with constant coefficients. If viscous damping is included, a similar problem occurs in that all the poles can not be moved to the left of a given vertical line. These negative results should be interpreted as a commentary on the limitations of these models, rather than on the control of real beams. If a Rayleigh damping model is used, a finite-dimensional controller may be designed to move the closed loop system poles essentially as far to the left in the complex plane as desired. This result will also hold for certain hysteresis damping models. This has implications for the settling time of the vibrations.

Morris, K. A.↗
NASA NTRS1992

Comparison of laser models

The final phase of modeling solar pumped lasers considers the photodissociation of the perfloralkyl molecules n - C3F7I ,t - C4F9I, and i - C3F7I. Computer modeling was compared to laboratory data and good agreement between theory and experiment was achieved. The following is a summary of the modeling of solar pumped lasers. A perfloride gas enters a tube at a point z = 0 and travels a distance L at a velocity, W, and then exits at the point z = L. During the flow, the gas is solar pumped over the initial distance 0 less than or = z less than or = z sub 0, where z sub 0 is less than or equal to L. The perfloride gas interacts chemically with light and a chain of chemical reactions occur.

Heinbockel, John H.↗
NASA NTRS1992

Comparison of turbulence models for powered-lift flow fields

The development of a practical turbulence model for the complex flows with strong streamline curvature associated with powered-lift aircraft was investigated. The approach was to modify existing models that were compatible with the widely used kappa-epsilon model already available in an existing 3D Navier-Stokes code. The state-of-the-art of current turbulence models was examined. Several models that provide curvature corrections to the kappa-epsilon model were numerically investigated. An algebraic Reynolds stress model, which provides additional physics, was also examined. Test cases including an impinging jet, an impinging jet in a crossflow, and two adjacent impinging jets with the resultant upwash fountain were calculated. The first two test cases could be modeled reasonsbly well with some of the models. The upwash fountain could not be modeled with sufficient accuracy, which is consistent with the findings of other investigators.

Roberts, Donald W.↗
NASA NTRS1993

A comparison of refined models for flexible subassemblies

Interactions between structure response and control of large flexible space systems have challenged current modeling techniques and have prompted development of new techniques for model improvement. Due to the geometric complexity of envisioned large flexible space structures, finite element models (FEM's) will be used to predict the dynamic characteristics of structural components. It is widely accepted that these models must be experimentally 'validated' before their acceptance as the basis for final design analysis. However, predictions of modal properties (natural frequencies, mode shapes, and damping ratios) are often in error when compared to those obtained from Experimental Modal Analysis (EMA). Recent research efforts have resulted in the development of algorithmic approaches for model improvement, also referred to as system or structure identification.

Smith, Suzanne Weaver↗
NASA NTRS1993

LDEF data: Comparisons with existing models

The relationship between the observed cratering impact damage on the Long Duration Exposure Facility (LDEF) versus the existing models for both the natural environment of micrometeoroids and the man-made debris was investigated. Experimental data was provided by several LDEF Principal Investigators, Meteoroid and Debris Special Investigation Group (M&D SIG) members, and by the Kennedy Space Center Analysis Team (KSC A-Team) members. These data were collected from various aluminum materials around the LDEF satellite. A PC (personal computer) computer program, SPENV, was written which incorporates the existing models of the Low Earth Orbit (LEO) environment. This program calculates the expected number of impacts per unit area as functions of altitude, orbital inclination, time in orbit, and direction of the spacecraft surface relative to the velocity vector, for both micrometeoroids and man-made debris. Since both particle models are couched in terms of impact fluxes versus impactor particle size, and much of the LDEF data is in the form of crater production rates, scaling laws have been used to relate the two. Also many hydrodynamic impact computer simulations were conducted, using CTH, of various impact events, that identified certain modes of response, including simple metallic target cratering, perforations and delamination effects of coatings.

Coombs, Cassandra R.↗
NASA NTRS1993

Discussion of 'Comparison of turbulence models for the natural convection boundary layer along a heated vertical plate'

The paper presents a critical comment on the work of Henkes and Hoogendoorn. In particular, it is argued that the model of To and Humphrey (TH) (1986) has been implemented incorrectly, rendering invalid the conclusion that the TH model considerably deviates from the other models evaluated. In their response to the criticism, the authors present arguments in support of the correctness of their implementation of the TH model and of the validity of the conclusions reached in their work.

Humphrey, Joseph A. C.↗
NASA NTRS1993

Comparison of kinetic models for atom recombination on high-temperature reusable surface insulation

Five kinetic models are compared for their ability to predict recombination coefficients for oxygen and nitrogen atoms over high-temperature reusable surface insulation (HRSI). Four of the models are derived using Rideal-Eley or Langmuir-Hinshelwood catalytic mechanisms to describe the reaction sequence. The fifth model is an empirical expression that offers certain features unattainable through mechanistic description. The results showed that a four-parameter model, with temperature as the only variable, works best with data currently available. The model describes recombination coefficients for oxygen and nitrogen atoms for temperatures from 300 to 1800 K. Kinetic models, with atom concentrations, demonstrate the influence of atom concentration on recombination coefficients. These models can be used for the prediction of heating rates due to catalytic recombination during re-entry or aerobraking maneuvers. The work further demonstrates a requirement for more recombination experiments in the temperature ranges of 300-1000 K, and 1500-1850 K, with deliberate concentration variation to verify model requirements.

Willey, Ronald J.↗
NASA NTRS1993

Comparison of Numerical Model Results with Diffusion Flames in Microgravity

The effects of gravity on methane diffusion flames were studied using a finite difference numerical model. Variables under consideration included velocity, pressure, temperature, enthalpy, reactive species, and inert carrier gas. Results obtained showed that flames in zero gravity were wider and taller than those in normal gravity. The use of a six reaction scheme produced similar predictions of flame width and height compared to those of the single reaction case. The numerical models predicted a considerable difference in the flame base region between normal gravity and low gravity. This region is considered to be beyond the boundaries of current analytical models.

Hyer, Paul V.↗
NASA NTRS1992

Comparison of micromechanical models for elastic properties

Results for the predicted effective elastic properties of unidirectional composites are presented for glass/epoxy and graphite/epoxy using eight different models. A brief review of each of the models is given along with the final equations in most cases. It is shown that there is wide variation in some predictions for glass/epoxy and that the upper and lower composite cylinder assemblage bounds do not always fall close together for this material.

Lissenden, Cliff J.↗
NASA NTRS1992

A comparison between backscattering models for rough surfaces

The ease of applicability of three scattering models is examined. This is accomplished by considering the time taken to numerically evaluate these models and by comparing their predictions as a function of surface roughness, frequency, incident angle and polarization with the moment-method solution in two dimensions. The complexity of the analytic models in three dimensions and their analytic reduction to high- and low-frequency regions are also compared. The selected models are an integral equation model (IEM), a full wave model (FWM), and the phase perturbation model (PPM). It is noted that in three dimensions, the full-wave model requires an evaluation of a tenfold integral and the phase perturbation model requires a fourfold and a twofold integral, whereas the integral equation model is an algebraic equation in like polarization under single scattering conditions. It is found that both the IEM and PPM agree with the moment-method solution from low to high frequencies numerically.

Chen, K. S.↗