Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “model based definitions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 487 records · Page 27

Updates to NASA’s Break-in-Prebreathe Rules Due to Type II Decompression Sickness Risk Considerations

INTRODUCTION. Investigation of a central neurological decompression sickness (DCS) case during ground testing at Johnson Space Center identified a break-in-prebreathe (BIP) 13 minutes prior to depressurization as the leading credible cause despite applicable prebreathe payback rules being followed. Applicable NASA rules, for ground and flight, directed 2:1 payback of breaks up to 10 mins in duration, regardless of when a break occurs relative to depress. Full restart of prebreathe is directed following breaks > 10 min. The adequacy of NASA’s BIP rules was evaluated prior to resuming hypobaric ground testing or ISS extravehicular activities. METHODS. The following information sources were reviewed prior to formulating recommendations: i) Type II DCS case report and investigation findings; ii) documented rationale for existing flight rules, iii) consultations with subject matter experts involved in definition of existing flight rules (several of whom had since left NASA), iv) relevant published literature, v) model estimates of tissue on-gassing and off-gassing, and vi) NASA’s operational experience with late breaks in prebreathe. RESULTS. NASA’s nominal prebreathe protocols are validated via extensive ground testing to ensure DCS risk is reduced to within acceptable limits. Conversely, there exists a paucity of data, no validated models, and limited documentation regarding BIP risk for NASA prebreathe protocols. Flight rules implemented for shuttle and later ISS are based primarily on expert opinion and an assumption of symmetric on-gassing and off-gassing, which would make 2:1 payback a conservative mitigation for a BIP. Assumption of exponential gas kinetics makes late breaks higher risk, or require greater payback, than earlier breaks. Two BIPs have occurred using the current ISS prebreathe protocol, each of which was followed by greater than 2:1 payback and at least 59 minutes of 100% O2 pre-depress. No DCS cases have been reported during shuttle or ISS EVA operations. DISCUSSION. Interim changes were implemented to protect against late breaks during ground and flight prebreathes by ensuring negligible difference in conservatively modeled ppN2 pre-depress compared to nominal validated protocols. Additional documentation and literature review as well as chamber test planning are ongoing with the objective of further ground and flight rule updates and validation of a BIP risk model.

Prebreathe↗

Updates to NASA’s Break-in-Prebreathe Rules Due to Type II Decompression Sickness Risk Considerations

INTRODUCTION. Investigation of a central neurological decompression sickness (DCS) case during ground testing at Johnson Space Center identified a break-in-prebreathe (BIP) 13 minutes prior to depressurization as the leading credible cause despite applicable prebreathe payback rules being followed. Applicable NASA rules, for ground and flight, directed 2:1 payback of breaks up to 10 mins in duration, regardless of when a break occurs relative to depress. Full restart of prebreathe is directed following breaks > 10 min. The adequacy of NASA’s BIP rules was evaluated prior to resuming hypobaric ground testing or ISS extravehicular activities. METHODS. The following information sources were reviewed prior to formulating recommendations: i) Type II DCS case report and investigation findings; ii) documented rationale for existing flight rules, iii) consultations with subject matter experts involved in definition of existing flight rules (several of whom had since left NASA), iv) relevant published literature, v) model estimates of tissue on-gassing and off-gassing, and vi) NASA’s operational experience with late breaks in prebreathe. RESULTS. NASA’s nominal prebreathe protocols are validated via extensive ground testing to ensure DCS risk is reduced to within acceptable limits. Conversely, there exists a paucity of data, no validated models, and limited documentation regarding BIP risk for NASA prebreathe protocols. Flight rules implemented for shuttle and later ISS are based primarily on expert opinion and an assumption of symmetric on-gassing and off-gassing, which would make 2:1 payback a conservative mitigation for a BIP. Assumption of exponential gas kinetics makes late breaks higher risk, or require greater payback, than earlier breaks. Two BIPs have occurred using the current ISS prebreathe protocol, each of which was followed by greater than 2:1 payback and at least 59 minutes of 100% O2 pre-depress. No DCS cases have been reported during shuttle or ISS EVA operations. DISCUSSION. Interim changes were implemented to protect against late breaks during ground and flight prebreathes by ensuring negligible difference in conservatively modeled ppN2 pre-depress compared to nominal validated protocols. Additional documentation and literature review as well as chamber test planning are ongoing with the objective of further ground and flight rule updates and validation of a BIP risk model.

Prebreathe↗

Sources of Uncertainty in Ultrasonic Phase-Based Assessment of Interfacial Stiffness in Adhesive Joints

Quantitative nondestructive evaluation (NDE) of adhesive joint strength is critical for certifying fastener-free bonded aerospace structures. Unfortunately, available adhesive NDE approaches are only suitable for detecting gross defects and delamination and cannot reliably detect variations in strength in intact bonds. Intact (i.e., nominally defect free) bonds are challenging to inspect because they, by definition, contain no macroscopic defects that would produce a strong NDE signature. Even in the absence of obvious defects, however, bond strength can vary substantially due to factors such as contamination, variations in the adhesive cure processes, and environmental exposure. For ultrasonic bond inspections, the effect of interactions from an imperfect adhesive interface are subtle and may include changes in the frequency content or phase of the ultrasonic signal. The bond condition can be deduced from these subtle changes in the acoustic response using an accompanying physics-based model of adhesive joint interaction. For example, researchers have used the spring network adhesion model of Baik and Thompson [1] to determine the interfacial stiffness of the joint from its ultrasonic response (e.g., [2]). This interfacial stiffness metric describes the bonds resistance to separation between the adhesive and adherent and has shown a strong correlation with joint strength. In this study, interfacial stiffness is assessed using the ultrasonic phase change associated with bond interaction in varying bond conditions. The phase change is measured precisely using a phase-locked-loop instrument over a swept range of frequencies. The phase transition at resonance, where the bond thickness is half the acoustic wavelength, produces a unique signature with which to fit a physics-based model. Interfacial stiffness is determined by minimizing the difference between the theoretical and experimental phase response. Experimental results are presented for glass specimens bonded with aerospace adhesives and a sensitivity analysis is performed to examine the effects of parameters that may be uncertain in the industrial inspection environment – namely bond thickness, adhesive and adherent properties, and porosity. The results are a first step toward an uncertainty quantified version of the measurement technique, show correlation between interfacial stiffness and bond strength, and are another key step toward maturing this approach for use in complex materials and joint geometries. [1] Baik, J.M. and Thompson, R.B., 1984. “Ultrasonic scattering from imperfect interfaces: a quasi-static model”. Journal of Nondestructive Evaluation, 4. [2] Haldren, H.A., Perey, D.F., Yost, W.T., Cramer, K.E., and Gupta, M.C., 2019. “Swept-frequency ultrasonic phase evaluation of adhesive bonding in tri-layer structures”. Journal of the Acoustical Society of America, 145.

Matt Webster↗

The NATA code; theory and analysis. Volume 2: User's manual

The NATA code is a computer program for calculating quasi-one-dimensional gas flow in axisymmetric nozzles and rectangular channels, primarily to describe conditions in electric archeated wind tunnels. The program provides solutions based on frozen chemistry, chemical equilibrium, and nonequilibrium flow with finite reaction rates. The shear and heat flux on the nozzle wall are calculated and boundary layer displacement effects on the inviscid flow are taken into account. The program contains compiled-in thermochemical, chemical kinetic and transport cross section data for high-temperature air, CO2-N2-Ar mixtures, helium, and argon. It calculates stagnation conditions on axisymmetric or two-dimensional models and conditions on the flat surface of a blunt wedge. Included in the report are: definitions of the inputs and outputs; precoded data on gas models, reactions, thermodynamic and transport properties of species, and nozzle geometries; explanations of diagnostic outputs and code abort conditions; test problems; and a user's manual for an auxiliary program (NOZFIT) used to set up analytical curvefits to nozzle profiles.

Bade, W. L.↗

Some potential blood flow experiments for space

Blood is a colloidal suspension of cells, predominantly erythrocytes, (red cells) in an aqueous solution called plasma. Because the red cells are more dense than the plasma, and because they tend to aggregate, erythrocyte sedimentation can be significant when the shear stresses in flowing blood are small. This behavior, coupled with equipment restrictions, has prevented certain definitive fluid mechanical studies from being performed with blood in ground-based experiments. Among such experiments, which could be satisfactorily performed in a microgravity environment, are the following: (1) studies of blood flow in small tubes, to obtain pressure-flow rate relationships, to determine if increased red cell aggregation can be an aid to blood circulation, and to determine vessel entrance lengths, and (2) studies of blood flow through vessel junctions (bifurcations), to obtain information on cell distribution in downstream vessels of (arterial) bifurcations, and to test flow models of stratified convergent blood flows downstream from (venous) bifurcations.

Cokelet, G. R.↗

Toward a balanced assessment of collinearity diagnostics

The present investigation is concerned with a review of the foundations upon which regression methodology is based, taking into account a study of regression diagnostics conducted by Belsey et al. (1980). It is found that one of the most difficult and controversial problems facing data analysts is related to redundant predictor variables in a regression analysis. Collinearity diagnostics are only meaningful when interpreted in terms of 'basic variables' which are 'structurally interpretable'. Conflicting perspectives are discussed, giving attention to the role of centering when diagnosing collinearity. The definition of collinearity and collinearity measures are considered along with questions regarding 'structural interpretability' as a universally accepted principle in model formulation, and the importance of the detection of collinearity with the constant term.

Gunst, R. F.↗

An assessment of the long-term drift in TOMS total ozone data, based on comparison with the Dobson network

Seven years of total ozone data derived from the TOMS instrument on Nimbus-7 are compared with results from 41 Dobson stations. In this study, a significant improvement in fit from previous studies is obtained using a model which assumes a change in the rate of drift between TOMS and Dobson around the middle of 1982. Results indicate that the TOMS measurements have drifted relative to the Dobson stations with a two-part linear trend of -0.25 + or - 0.17 percent per year during the period from launch to 6/30/82, and -0.51 + or - 0.21 percent per year during 7/1/82 - 10/31/85. The causes of this drift cannot be definitively separated between residual uncorrected drift in the TOMS instrument (a similar drift is apparent in the SBUV-Dobson comparisons), limited sensitivity of the TOMS to increases in tropospheric ozone, and the effect of local increases in pollution levels on individual Dobson stations.

Fleig, Albert J.↗

Theory and Practical Design of Phase-locked Receivers, Volume I

This is Volume I of a two-volume work on the theory, of phase-locked receivers, with pertinent reference material on practical receiver design. Volume I is primarily devoted to the performance of carrier-tracking loops, including a rigorous treatment of narrow-band systems having IF limiters. The bulk of the work is based on a theoretical linear model, but a nonlinear method is also presented to predict behavior near the threshold. The emphasis throughout the work is toward completeness, simplicity, and internal consistency of the material assembled. Part I of this Volume is an exposition of the theory, the resulting equations, and the design philosophy that have enabled the phase-lock concept to evolve into the basic principle underlying the most sensitive receivers il, the world today. Part II is a condensed version of Part I, intended as a quick reference to formulas, definitions, and salient design considerations.

RECEIVER↗

A principled approach to the measurement of situation awareness in commercial aviation

The issue of how to support situation awareness among crews of modern commercial aircraft is becoming especially important with the introduction of automation in the form of sophisticated flight management computers and expert systems designed to assist the crew. In this paper, cognitive theories are discussed that have relevance for the definition and measurement of situation awareness. These theories suggest that comprehension of the flow of events is an active process that is limited by the modularity of attention and memory constraints, but can be enhanced by expert knowledge and strategies. Three implications of this perspective for assessing and improving situation awareness are considered: (1) Scenario variations are proposed that tax awareness by placing demands on attention; (2) Experimental tasks and probes are described for assessing the cognitive processes that underlie situation awareness; and (3) The use of computer-based human performance models to augment the measures of situation awareness derived from performance data is explored. Finally, two potential example applications of the proposed assessment techniques are described, one concerning spatial awareness using wide field of view displays and the other emphasizing fault management in aircraft systems.

Tenney, Yvette J.↗

Modeling the Nonlinear, Strain Rate Dependent Deformation of Shuttle Leading Edge Materials with Hydrostatic Stress Effects Included

An analysis method based on a deformation (as opposed to damage) approach has been developed to model the strain rate dependent, nonlinear deformation of woven ceramic matrix composites, such as the Reinforced Carbon Carbon (RCC) material used on the leading edges of the Space Shuttle. In the developed model, the differences in the tension and compression deformation behaviors have also been accounted for. State variable viscoplastic equations originally developed for metals have been modified to analyze the ceramic matrix composites. To account for the tension/compression asymmetry in the material, the effective stress and effective inelastic strain definitions have been modified. The equations have also been modified to account for the fact that in an orthotropic composite the in-plane shear response is independent of the stiffness in the normal directions. The developed equations have been implemented into LS-DYNA through the use of user defined subroutines (UMATs). Several sample qualitative calculations have been conducted, which demonstrate the ability of the model to qualitatively capture the features of the deformation response present in woven ceramic matrix composites.

Goldberg, Robert K.↗

Exploration Systems Development Mission Directorate: Moon to Mars Architecture Definition Document

The National Aeronautics and Space Administration (NASA) explores the unknown in air and space, innovates for the benefit of humanity, and inspires the world through discovery. Extending the reach of humanity through the human exploration of the Moon, Mars, and beyond is key to that mission. NASA’s Moon to Mars Strategy and Objectives document establishes long-term goals and objectives for crewed deep space exploration; however, satisfying NASA’s Moon to Mars Objectives requires an innovative approach to the definition, management, and execution of NASA’s Moon to Mars Architecture. An architecture offers a high-level unifying structure and defines a system. It provides rules, guidelines, and constraints that define a cohesive and coherent framework that identifies constituent parts, relationships, and connections and establishes how those parts fit and work together. This Architecture Definition Document (ADD) establishes the process for the decomposition of objectives empowers the agency’s success in achieving human exploration of the cosmos. NASA updates this document annually to reflect the maturation of the architecture and the progress NASA and partners make toward achieving exploration objectives. The ADD is not a manifest or requirements document. Instead, it serves as a tool for the programs, projects, and engineers who will implement and execute NASA’s bold ambitions for crewed exploration of deep space. As established in the Moon to Mars Strategy and Objectives, “Why” we explore encompasses three pillars: Science, Inspiration, and National Posture. Ensuring success in all three areas requires an architectural approach that incorporates innovation, collaboration, and partnerships that can be sustained across a multi-decadal effort. This second revision (Rev-B) of the ADD, developed to support NASA’s 2024 Architecture Concept Review (ACR), incorporates several key updates to support the continued evolution of the architecture. Since the last revision of the ADD, NASA has significantly improved the clarity of the objective decomposition, which distills exploration objectives into the characteristics and needs and use cases and functions needed to achieve them. The updated decomposition incorporates findings from internal studies and diverse stakeholder feedback. A model-based systems engineering approach ensures coherence and consistency, removing inconsistency and repetition. Revision B also incorporates advancements to NASA’s Mars architecture, including insight into initial capabilities, systems, and operations necessary to support the Humans to Mars segment. Updates to objective decomposition for Mars add significant detail to the ADD and hint at areas of forward work and future study. An appendix adds greater depth in the future decisions needed for Mars that will drive lunar needs. They are not the only decisions to be made, but they will have huge effects on subsequent decisions. NASA continues to introduce new exploration systems into the architecture. Two new elements — initial surface habitat and lunar surface cargo lander—successfully passed mission concept review in 2024 as a result of extensive analysis, concept refinement, and studies. These elements and their respective reference missions appear in this revision. NASA also continues to apply architecture processes to cross-agency efforts and coordination with external stakeholders by including definitions of architecture technology gaps — essential areas for engagement across and beyond the agency. The technology gaps appendix identifies areas that need attention and innovation to enable future exploration. In publishing this information, NASA communicates the technologies and capabilities that may benefit from partnership with industry, academia, other U.S. government agencies, and international space agencies. Ultimately, NASA established the Moon to Mars Architecture approach to communicate and facilitate humanity’s journey into the universe according to the principles and recurring tenets of NASA’s Moon to Mars Strategy and Objectives. The NASA architecture team thanks their many stakeholders, participants, and partners for their efforts to review and provide feedback. Their support has been critical to the success of this approach.

Elements↗

Efficient three-dimensional global models for climate studies - Models I and II

Climate modeling based on numerical solution of the fundamental equations for atmospheric structure and motion permits the explicit modeling of physical processes in the climate system and the natural treatment of interactions and feedbacks among parts of the system. The main difficulty concerning this approach is related to the computational requirements. The present investigation is concerned with the development of a grid-point model which is programmed so that both horizontal and vertical resolutions can easily be changed. Attention is given to a description of Model I, the performance of sensitivity experiments by varying parameters, the definition of an improved Model II, and a study of the dependence of climate simulation on resolution with Model II. It is shown that the major features of global climate can be simulated reasonably well with a horizontal resolution as coarse as 1000 km. Such a resolution allows the possibility of long-range climate studies with moderate computer resources.

Russel, G.↗

Inertial coordinate system on the sky; Proceedings of the 141st Symposium of the IAU, Leningrad, USSR, Oct. 17-21, 1989

The present conference on the inertial coordinate system on the sky encompasses the legacy of Pulkovo for inertial systems and reference frames, Pulkovo today, concepts and models, and the realization and comparison of reference frames. Specific issues addressed include the longest geodetic arc, the origin of celestial coordinates, the photographic vertical catalog, a program for determining the connection between radio and optical reference frames, positional observations of triple stars for the HST mission, and a general relativistic description of the celestial reference system. Also addressed are proposals for an improved nutation formula, dynamical reference frames in the planetary and earth-moon systems, the construction of a frame of homogeneous accuracy based on space observations, astrometric interferometry, and the definition and stability of local inertial reference frames.

Lieske, Jay H.↗

Evaluation of Planetary Boundary Layer Structure from NASA Global Modeling and Assimilation Office’s Next Retrospective Analysis Product MERRA-21C

The Planetary Boundary Layer (PBL) is a complex interface between Earth’s surface and the atmosphere with high spatiotemporal variability in its characteristics, and accurate simulation and observation of the PBL has proven to be a challenge. In this study, we evaluate PBL structures from NASA Global Modeling and Assimilation Office (GMAO)’s next retrospective analysis product: the Goddard Earth Observing System Retrospective Analysis of the early 21st Century (GEOS-R21C), with 25-km horizontal resolution. The GEOS-R21C incorporates a wide range of observing systems and various improvements over previous GMAO reanalysis. We compare the PBL thermodynamic structure as well as PBL Height (PBLH) from GEOS-R21C with various PBL observations. For PBLH, definitions are different depending on each observing system. PBLHs derived from radiosonde observations and Global Navigation Satellite System Radio Occultation (GNSS RO) are based on bulk Richardson number and refractivity gradient, respectively. The results of the evaluation of PBL structure from GMAO’s next retrospective analysis product will be presented. In addition, comparison between near-real-time (NRT) commercial and NASA commercial GNSS RO PBLH will also be discussed.

Eun-Gyeong Yang↗

Inversion of vegetation canopy reflectance models for estimating agronomic variables. I - Problem definition and initial results using the Suits model

An important but relatively uninvestigated problem in remote sensing is the inversion of vegetative canopy reflectance models to obtain agrophysical parameters, given measured reflectances. The problem is here formally defined and its solution outlined. Numerical nonlinear optimization techniques are used to implement this inversion to obtain the leaf area index using Suits' canopy reflectance model. The results for a variety of cases indicate that this can be done successfully using infrared reflectances at different views or azimuth angles or a combination thereof. The other parameters of the model must be known, although reasonable measurement errors can be tolerated without seriously degrading the accuracy of the inversion. The application of the technique to ground based remote-sensing experiments is potentially useful, but is limited to the degree to which the canopy reflectance model can accurately predict observed reflectances.

Goel, N.↗

Characterization of Material Response During Arc-Jet Testing with Optical Methods Status and Perspectives

The characterization of ablation and recession of heat shield materials during arc jet testing is an important step towards understanding the governing processes during these tests and therefore for a successful extrapolation of ground test data to flight. The behavior of ablative heat shield materials in a ground-based arc jet facility is usually monitored through measurement of temperature distributions (across the surface and in-depth), and through measurement of the final surface recession. These measurements are then used to calibrate/validate materials thermal response codes, which have mathematical models with reasonably good fidelity to the physics and chemistry of ablation, and codes thus calibrated are used for predicting material behavior in flight environments. However, these thermal measurements only indirectly characterize the pyrolysis processes within an ablative material pyrolysis is the main effect during ablation. Quantification of pyrolysis chemistry would therefore provide more definitive and useful data for validation of the material response codes. Information of the chemical products of ablation, to various levels of detail, can be obtained using optical methods. Suitable optical methods to measure the shape and composition of these layers (with emphasis on the blowing layer) during arc jet testing are: 1) optical emission spectroscopy (OES) 2) filtered imaging 3) laser induced fluorescence (LIF) and 4) absorption spectroscopy. Several attempts have been made to optically measure the material response of ablative materials during arc-jet testing. Most recently, NH and OH have been identified in the boundary layer of a PICA ablator. These species are suitable candidates for a detection through PLIF which would enable a spatially-resolved characterization of the blowing layer in terms of both its shape and composition. The recent emission spectroscopy data will be presented and future experiments for a qualitative and quantitative characterization of the material response of ablative materials during arc-jet testing will be discussed.

Winter, Michael↗

Scenario Setup and Forcing Data for Impact Model Evaluation and Impact Attribution Within the Third Round of the Inter-Sectoral Model Intercomparison Project (ISIMIP3a)

This paper describes the rationale and the protocol of the first component of the third simulation round of the Inter-Sectoral Impact Model Intercomparison Project (ISIMIP3a, http://www.isimip.org, last access: 2 November 2023) and the associated set of climate-related and direct human forcing data (CRF and DHF, respectively). The observation-based climate-related forcings for the first time include high-resolution observational climate forcings derived by orographic downscaling, monthly to hourly coastal water levels, and wind fields associated with historical tropical cyclones. The DHFs include land use patterns, population densities, information about water and agricultural management, and fishing intensities. The ISIMIP3a impact model simulations driven by these observation-based climate-related and direct human forcings are designed to test to what degree the impact models can explain observed changes in natural and human systems. In a second set of ISIMIP3a experiments the participating impact models are forced by the same DHFs but a counterfactual set of atmospheric forcings and coastal water levels where observed trends have been removed. These experiments are designed to allow for the attribution of observed changes in natural, human, and managed systems to climate change, rising CH 4 and CO 2 concentrations, and sea level rise according to the definition of the Working Group II contribution to the IPCC AR6.

Inter Sectoral Impact Model Intercomparison Projec↗

Studies and analyses of the space shuttle main engine. Failure information propagation model data base and software

The failure information propagation model (FIPM) data base was developed to store and manipulate the large amount of information anticipated for the various Space Shuttle Main Engine (SSME) FIPMs. The organization and structure of the FIPM data base is described, including a summary of the data fields and key attributes associated with each FIPM data file. The menu-driven software developed to facilitate and control the entry, modification, and listing of data base records is also discussed. The transfer of the FIPM data base and software to the NASA Marshall Space Flight Center is described. Complete listings of all of the data base definition commands and software procedures are included in the appendixes.

Tischer, A. E.↗